The code wrapped in '#ifdef I40E_DCB_SW' is currently for software
validation only, it should be removed at all.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
The code wrapped in '#ifdef PREBOOT_SUPPORT' was added for
queue context initialization specifically for A0 silicon.
As A0 silicon has gone for a long time, the code should be
removed at all. In addition, the checks of 'QV_RELEASE'
and 'PREBOOT_SUPPORT' are also not needed anymore and can
be removed.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
The code wrapped in '#ifdef DMA_SYNC_SUPPORT' was written specially
for Solaris, it is not needed anymore for others including DPDK.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
The code wrapped in '#ifdef ETHTOOL_TEST' in i40e_diag.c is for
ethtool testing only, it is not needed anymore and can be removed.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
'nvmupdate' is intended to support the userland NVMUpdate tool for
Fortville eeprom. These code changes is to remove the conditional
compile macro, and support those by default. In addition, renaming
all 'errno' to avoid any compile warning or error.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
In share code, 'tab' is used to align values rather than 'space'.
The changes in i40e_adminq_cmd.h is to make the indentation more
consistent in share code.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
Add new file to support controller X550, therefore update the Makefile
and README file. It also updates the API functions, DCB related functions,
mailbox related functions, etc to support X550.
In addition, some new macros used by X550 are added.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
[Thomas: merge dependent patches]
- Implement functions to do I2C byte read and write
- Support 82599_QSFP_SF_QP and 82599_LS
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
[Thomas: split patch]
- Store lan_id and physical semaphore mask into hardware physical information,
and use them to control read and write physical registers in IXGBE base code.
- Extend mask from 16 bits to 32 bits for releasing or acquiring SWFW semaphore
in IXGBE base code. It is used in reading and writing I2C byte.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
[Thomas: merge dependent patches]
Remove unnecessary delay when setting up physical link and negotiating
in IXGBE base code.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Introduce a new argument to let caller determine if it need read and
return data or not after executing host interface command in IXGBE base code.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Refines function to let eeprom checksum calculation return
either a negative error code on error, or the 16-bit checksum
in IXGBE base code.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Implements a function to check command complete for flow director in
IXGBE base code, and replaces related code snippet with this function.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
This patch defines new error type in IXGBE base code; they are
used to report different kinds of error.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
If VIRTIO_NET_F_CTRL_VQ is not negotiated hw->cvq will be NULL
Signed-off-by: Damjan Marion <damarion@cisco.com>
Acked-by: Changchun Ouyang <Changchun.ouyang@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Recent Ubuntu 12.04.5 LTS is shipped with 3.13.0-36.63 as the only
supported kernel.
So skb_set_hash has been backported and is conflicting with kni kcompat one.
Commit a09b359dac ("fix build on Ubuntu 14.04") describes the initial problem.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
[Thomas: reorder conditions to ease reading]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Clang fails with an error about a variable being used uninitialized:
lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c:67:30:
error: variable 'dma_addr0' is uninitialized
when used here [-Werror,-Wuninitialized]
dma_addr0 = _mm_xor_si128(dma_addr0, dma_addr0);
^~~~~~~~~
This error can be fixed by replacing the call to xor which
takes two parameters, by a call to setzero, which does not take any.
Reported-by: Keith Wiles <keith.wiles@windriver.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Rename start_?x_per_q to ?x_deferred_start
and add comments.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
A doxygen group begins with /**@{*/ and ends with /**@}*/.
By enabling DISTRIBUTE_GROUP_DOC, the first comment is applied
to each undocumented member of the group.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The port parameter in mbuf should be set with an input port id
because DPDK apps may use it to know where each packet came from.
Signed-off-by: Saori Usami <susami@igel.co.jp>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The flag RTE_PCI_DRV_MULTIPLE was used to register an eth_driver allowing
multiples devices with a single PCI id.
It is now possible to register a pci_driver and create ethdev objects
using rte_eth_dev_allocate().
Suggested-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The function rte_snprintf() was deprecated in version 1.7.0
(commit 6f41fe75e2).
It's now totally removed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This field is not used anymore, remove it.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There is no need for ioport access for applications that won't use virtio pmds.
Make rte_eal_iopl_init() non-static so that it is called from pmds that need it.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
From man(4) io:
"The initial implementation simply raised the IOPL of the current thread
when open(2) was called on the device. This behaviour is retained in the
current implementation as legacy support for both i386 and amd64."
http://www.freebsd.org/cgi/man.cgi?query=io&sektion=4
Nothing prevents from closing it just after.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Rework bond pmd initialisation so that we don't need to modify eal
for this pmd to work.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
No need to restrict usage of non Intel SFP.
If (hw->phy.type == ixgbe_phy_sfp_intel) is false,
a warning will be logged.
It was disabled for ixgbe and enabled but unused for i40e.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Since the introduction of vector PMD, a bug in ixgbe_rxq_rearm could
cause a crash. As long as the memory pool allocated to the RX queue
has mbufs available, there is no problem. After allocation of _all_
mbufs from the memory pool, previously returned mbufs by
rte_eth_rx_burst could be accessed by subsequent calls to the PMD and
could be returned by subsequent calls to rte_eth_rx_burst. From the
perspective of the application, the means that fields within the mbuf
could change and that previously allocated mbufs could appear multiple
times.
After failure of mbuf allocation, the dd bits should indicate that the
packets are not ready. For this, this patch adds code to reset the dd
bits in the first RTE_IXGBE_DESCS_PER_LOOP packets of the next
RTE_IXGBE_RXQ_REARM_THRESH packets only if the next
RTE_IXGBE_RXQ_REARM_THRESH packets that will be accessed contain
previously allocated packets.
Setting the bits is not enough. The bits are checked _after_ setting
the mbuf fields, thus a mechanism is needed to prevent the previously
used mbuf pointers from being accessed during the speculative load of
the mbuf fields. For this reason, not only the dd bits are reset, but
also the mbufs associated to those descriptors are set to point to a
"fake" mbuf.
Signed-off-by: Balazs Nemeth <balazs.nemeth@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When Flow Director was used together with bulk alloc, id and hash
was swapped when packet matches flow director filter due to improper
fdir field initialization.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
[Thomas: merged with mbuf changes]
