The get_ib_device_match function iterates over the list of ib devices
returned by the get_device_list glue function and returns the ib device
matching the provided address.
Since this function is in use by several drivers, in this patch we
share the function in common part.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
UMR (User-Mode Memory Registration) WQE can present data buffers
scattered within multiple mbufs with single indirect mkey. Take
advantage of the UMR WQE, scattered mbuf in one operation can be
presented to an indirect mkey. The RegEx which only accepts one
mkey can now process the whole scattered mbuf in one operation.
The maximum scattered mbuf can be supported in one UMR WQE is now
defined as 64. The mbufs from multiple operations can be combined
into one UMR WQE as well if there is enough space in the KLM array,
since the operations can address their own mbuf's content by the
mkey's address and length. However, one operation's scattered mbuf's
can't be placed in two different UMR WQE's KLM array, if the UMR
WQE's KLM does not has enough free space for one operation, the
extra UMR WQE will be engaged.
In case the UMR WQE's indirect mkey will be over wrapped by the SQ's
WQE move, the mkey's index used by the UMR WQE should be the index
of last the RegEX WQE in the operations. As one operation consumes
one WQE set, build the RegEx WQE by reverse helps address the mkey
more efficiently. Once the operations in one burst consumes multiple
mkeys, when the mkey KLM array is full, the reverse WQE set index
will always be the last of the new mkey's for the new UMR WQE.
In GGA mode, the SQ WQE's memory layout becomes UMR/NOP and RegEx
WQE by interleave. The UMR and RegEx WQE can be called as WQE set.
The SQ's pi and ci will also be increased as WQE set not as WQE.
For operations don't have scattered mbuf, uses the mbuf's mkey directly,
the WQE set combination is NOP + RegEx.
For operations have scattered mbuf but share the UMR WQE with others,
the WQE set combination is NOP + RegEx.
For operations complete the UMR WQE, the WQE set combination is UMR +
RegEx.
Signed-off-by: John Hurley <jhurley@nvidia.com>
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch adds support for the timestamp format settings for
the receive and send queues. If the firmware version x.30.1000
or above is installed and the NIC timestamps are configured
with the real-time format, the default zero values for newly
added fields cause the queue creation to fail.
The patch queries the timestamp formats supported by the hardware
and sets the configuration values in queue context accordingly.
Fixes: 92f2c6a30fe0 ("regex/mlx5: add send queue")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The rof file holds programming instructions for
a given HW version.
In order to support future generation of HW it
was decided that the rof file will hold number
of rule configurations, and the driver will use
the one that matches the HW version.
In current code we force sync after each write block.
This has impact on performance.
The solution is to move the sync to the end of the
entire programming sequence.
Signed-off-by: Ori Kam <orika@nvidia.com>
The mlx5_regex_pci_probe function allocates a mlx5_regex_priv structure
using rte_zmalloc.
If the allocation fails, the function jumps to the dev_error label in
order to release previously allocated resources in the function.
However, in the dev_error label it attempts to refer to the internal
fields of the priv structure and if its allocation fails (as in this
case) it is actually dereferencing to NULL.
Replace the jump with an error label.
Fixes: 1db6ebd4ef58 ("regex/mlx5: fix crash on initialization failure")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch provides the UAR allocation workaround for the
hosts where UAR allocation with Write-Combining memory
mapping type fails.
Fixes: b34d816363b5 ("regex/mlx5: support rules import")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This adds the ConnectX-7 and Bluefield-3 device ids to the list of
supported Mellanox devices that run the MLX5 PMDs.
The devices is still in development stage.
Signed-off-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Currently job data is being copied to pre-registered buffer.
To avoid memcpy on the datapath, use dynamic memory registration.
This change will reduce latency when sending regex jobs. The first few
jobs may have high latency due to registration, but assuming all
following mbufs will arrive from the same mempool/hugepage, there will
be no further memory registration.
Signed-off-by: Yuval Avnery <yuvalav@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The driver name was registered as "net_mlx5_regex".
It is renamed as "regex_mlx5".
The same name is used in mlx5_regex_driver.pci_driver.driver.name,
instead of "mlx5_regex", for consistency.
The string used for log registration (pmd.regex.mlx5) could be derived
from the driver name. A macro is created so name definitions are close.
Fixes: cfc672a90b74 ("regex/mlx5: support probing")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ori Kam <orika@mellanox.com>
Migrate mlx5 net, vdpa and regex PMD to start using mlx5 common class
driver.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
mlx5_common is shared library between mlx5 net, VDPA and regex PMD.
It is better to use common initialization helper instead of using
RTE_PRIORITY_CLASS priority.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When fail to initialize the device, avoid segmentation fault while
accessing uninitialized priv.
Fixes: cfc672a90b74 ("regex/mlx5: support probing")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Add the start, stop and close functions.
In current implementation they are empty functions
and are only exists in order that when called
from rte level, the function will return with success code.
Signed-off-by: Ori Kam <orika@mellanox.com>
Will look for a free SQ to send the job on.
doorbell will be given when sq is full, or no more jobs on the burst.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This commit introduce the ability to program rules to the
RegEx engine.
Signed-off-by: Francis Kelly <fkelly@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Add the MLX5_REGEX_LOG macro which should be used for error prints.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This commit introduce the RegEx poll mode drivers class, and
adds Mellanox RegEx PMD.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
