Hash library used a function pointer to choose a different
key compare function, depending on the key size.
As a result, multiple processes could not use the same hash table,
as the function addresses vary from one process to another.
Instead, a jump table is used, so each process has its own
function addresses, accessing this table with an index stored
in the hash table (note that using a custom key compare function
is not supported in multi-process mode).
Fixes: 48a399119619 ("hash: replace with cuckoo hash implementation")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Instead of using RTE_ARCH_X86_64, RTE_ARCH_X86_32
and RTE_ARCH_I686, use directly RTTE_ARCH_X86
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The memory zone could be freed just after adding it to the metadata
file and just before marking it as not freeable.
This patch changes the locking logic in order to prevent it.
Fixes: cd10c42eb5bc ("mem: fix ivshmem freeing")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Loop that calculates total number of tx descriptors in slave tx queues
should iterate up to nb_tx_queues, not nb_rx_queues.
Fixes: 3ef7955700e7 ("bonding: fix LACP mempool size")
Signed-off-by: Vladyslav Buslov <vladyslav.buslov@harmonicinc.com>
Stopping then re-starting a bond interface containing slaves that
used polling for link detection caused the bond to think all slave
links were down and inactive.
Move the start of the polling for link from slave_add() to
bond_ethdev_start() and in bond_ethdev_stop() make sure we clear
the last_link_status of the slaves.
Fixes: a45b288ef21a ("bond: support link status polling")
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
rte_hash_set_cmp_func() had an incorrect Doxygen comment
for one of its parameters.
Fixes: 95da2f8e9c61 ("hash: customize compare function")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Current prefetch instruction (dcbt) implementation for IBM POWER8 has wrong
Touch Hint(TH) parameter. The current setting of TH=1 indicates to load data from
current cache line and an unlimited number of sequentially following cache lines.
TTH=0 means to load data from current cache line. rte_prefetch0 function is defined
to load one cache line, which means TH=0 is suited here.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
This patch fixes the max logic number and memory channel number settings
on IBM POWER8 platform.
1. The max number of logic cores of a POWER8 processor is 96. Normally,
there are two sockets on a server. So the max number of logic cores
are 192. So this parch set CONFIG_RTE_MAX_LCORE to 256.
2. The socket number on POWER8 little endian platform can be larger than 16.
This patch set CONFIG_RTE_MAX_NUMA_NODES to 32 for POWER8.
3. Currently, the max number of memory channels are hardcoded to 4. However,
on a POWER8 machine, the max number of memory channels are 8. This patch
removes the constraint.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
This patch fixes the initialization error in flow classification
pipeline. Originally, when there is no key_mask specified in the
CFG file, all '0' mask is utilized.
Fixes: 1a33c5ea2f45 ("examples/ip_pipeline: clean config parser")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The branch was disabled because of a typo in the SSE4.2 flag.
Change also the x86_64 flag to use a DPDK one.
Fixes: 28377375c6c0 ("examples/ip_pipeline: fix build for x86_64 without SSE4.2")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Originally l3fwd used 16-bit value to store dest_port value.
To accommodate 24-bit nexthop dest_port was increased to 32-bit,
though some further packet processing code remained unchanged and
still expects dest_port to be 16-bit.
That is not correct and can cause l3fwd invalid behaviour or even
process crash/hang on some input packet patterns.
For the fix, I choose the simplest approach and restored dest_port
as 16-bit value, plus necessary conversions from 32 to 16 bit values
after lpm_lookupx4.
Fixes: dc81ebbacaeb ("lpm: extend IPv4 next hop field")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Not all tx ports was included in tx_port_id array, used to periodically
drain only available ports. This caused that some packets remain in buffer
when application stops to receiving packets.
Fixes: 52c97adc1f0f ("examples/l3fwd: fix exact match performance")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In FreeBSD, sys/types.h and netinet/in.h need to be included before
netinet/ip.h
There were missed typedef for u_char - <sys/types.h>
There were missed network definitions - <netinet/in.h>
Failure #13: http://dpdk.org/ml/archives/test-report/2016-March/001896.html
Fixes: d299106e8e31 ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Display extra crypto information (algorithms, keys/IV/AAD used, chain...),
so user can know exactly what operations are being carried out.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
In order to ease the parsing and display of supported algorithms
in the application, two new arrays are created, which contains
the strings of the different cipher and authentication algorithms,
These lists are used to parse the algorithms from the command line,
and will be used to display crypto information to the user.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Cipher/Auth keys, AAD and IV must be passed from command line
with ":" between bytes, but help was not clarifying that.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Some crypto algorithms support more than one key size
(including cipher key, authentication key, IV and AAD),
but the app was using always the minimum size.
These changes allows the user to use an specific size,
either from the string provided with cipher_key, auth_key, iv and ADD
parameters, or from the values provided with cipher_key_random_size,
auth_key_random_size, iv_random_size and aad_random_size.
This also allows the user to specify the digest size.
Fixes: 1df9c0109f4c ("examples/l2fwd-crypto: parse key parameters")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
App was generating a random IV/AAD of only 4 bytes,
instead of the actual length, since it was using sizeof(length).
Fixes: 27cf2d1b18e1 ("examples/l2fwd-crypto: discover capabilities")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When passing the preferred crypto device type in the command line
parameters, the string (HW/SW/ANY) was not being saved, which is used
for error information to the user.
Fixes: 27cf2d1b18e1 ("examples/l2fwd-crypto: discover capabilities")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
L2fwd-crypto app is based on L2fwd app and it inherits
some of its parameters (such as portmask, queues per core...).
The parameter period (period of time between statistic updates)
is -T in L2fwd, but was -t in L2fwd-crypto, so for consistency,
it is changed back to -T
Fixes: 387259bd6c67 ("examples/l2fwd-crypto: add sample application")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When compiling dpdk_qat app with an i686 target on a x86_64 OS,
an error message was shown, saying that it can only be built
on a 32-bit OS, which should be i686 OS, as other 32-bit OS
are not supported.
Fixes: 3460012bcce6 ("examples/qat: update")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added AES and snow3g Authenticated encryption and decryption tests
for out-of-place operations.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
This patch adds out-of-place operations to qat symmetric crypto PMD,
i.e. the result of the operation can be written to the destination buffer
instead of overwriting the source buffer as done in "in-place" operation.
Both buffers can be of different sizes.
Previously the qat PMD assumed that m_src and m_dst in rte_crypto_sym_op
were identical.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
In SUSE11-SP3 i686 platform, with gcc 4.5.1, there are compile issues, e.g:
null_crypto_pmd_ops.c:44:3: error:
unknown field 'sym' specified in initializer
cc1: warnings being treated as errors
The member in anonymous union initialization should be inside '{}',
otherwise it will report an error.
Fixes: 26c2e4ad5ad4 ("cryptodev: add capabilities discovery")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
In SUSE11-SP3 i686 platform, with gcc 4.5.1, there is a
compile issue:
rte_lpm.c: In function ‘add_depth_small_v20’:
rte_lpm.c:778:7: error: unknown field ‘next_hop’
specified in initializer
The root cause is gcc only allow anonymous union initialized
according to the field it is defined. But next_hop is defined
in different field when in different platform(Endian).
One solution is add if define in the code to avoid this issue,
but there is a simple way, initialize it separately later.
Fixes: afc5c914a083 ("lpm: fix big endian support")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
These asserts are only for debugging and never fired during
any testing, but they confuse coverity's null tracking.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yong Wang <yongwang@vmware.com>
Silence a compiler warning that this variable may be used uninitialized.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tell the compiler to use an unsigned constant for the config shifts.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tell the compiler to use an unsigned constant for the config shifts.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The device lsc interrupt check has a misleading whitespace around it which
can be improved by adding appropriate braces to the check. Since the ret
variable was checked after previous assignment, this introduces no functional
change.
Fixes: 921a72008f76 ("e1000: add Rx interrupt handler")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The register read/write mphy functions have misleading whitespace around
the `locked` check. This cleanup merely preserves the existing functionality
and suppresses future gcc versions' "misleading indentation" warning.
Suggested-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The test application calls printf(...) with the suite->suite_name argument.
The intent (based on whitespace) in the printf is to check suite->suite_name
first and then apply the printf. This doesn't happen due to missing brackets.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
If the provided configuration does not call for RSS, then RSS is
explicitly disabled. Without this change, the device continues to
operate under the previous RSS configuration.
Fixes: 57033cdf8fdc ("fm10k: add PF RSS")
Signed-off-by: Michael Frasca <michael.frasca@oracle.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Now that vmxnet3 supports TCP/UDP checksum offload, let's update
the default txq flags to allow such offloads. Also fixed the tx
queue setup check to allow TCP/UDP checksum and only error out
if SCTP checksum is requested.
Fixes: f598fd063bb1 ("vmxnet3: add Tx L4 checksum offload")
Reported-by: Heng Ding <hengx.ding@intel.com>
Signed-off-by: Yong Wang <yongwang@vmware.com>
The NFP driver (unlike other PCI devices) was not copying the pci info
from the pci_dev to the eth_dev. This would make the driver_name be
null (and other unset fields) when application uses dev_info_get.
This was found by code review; do not have the hardware.
Fixes: d4a27a3b092a ("nfp: add basic features")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When the number of RX queues is not a power of two,
the RETA table is configured to its maximum size for
better balancing.
Testing showed that limiting its size to 256 improves performance
noticeably with little to no impact on balancing results.
Fixes: ebb30ec64a68 ("mlx5: increase RETA table size")
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Once freed, completed mbufs pointers are not set to NULL in the TX queue.
Clean up function must take this into account.
Fixes: 2e22920b85d9 ("mlx5: support non-scattered Tx and Rx")
Fixes: 7fae69eeff13 ("mlx4: new poll mode driver")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Calling rte_eth_dev_get_dcb_info to get dcb info from i40e
driver if VMDQ is disabled, results in a segmentation fault.
This patch fixes it by treating VMDQ and No-VMDQ respectively
when querying dcb information.
Fixes: 5135f3ca49a7 ("i40e: enable DCB in VMDQ VSIs")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
The lower 16 bits of EICR register are used for queue interrupts,
dpdk framework take over the first bit for other interrupts like
LSC, so there're only 15 bits left for queue interrupts mapping.
This patch adds a check for the num of interrupt queues at
dev_start.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When starting testpmd with multiple queues on a ixgbe VF
port, it failed with this printing, "nb_rxq(4) is greater
than max_rx_queues(1)".
The root cause is the VF doesn't get the right max rx queue
number from PF and it uses the default value 1.
VF max rx queue number is set by PF through mailbox messages.
The message for this setting only supports version 1.1. As
message version is updated to 1.2, VF cannot parse the rx queue
number setting message correctly.
This patch raise a specific base code update for this issue.
Fixes: 72dec9e37a84 ("ixgbe: support multicast promiscuous mode on VF")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Update the 'imissed' counter with the number of packets dropped
by the NIC.
Fixes: fefed3d1e62c ("enic: new driver")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
When the enic was disabled, link notification was correctly disabled
in the NIC but the software indicator that it was disabled was not
updated (vdev->notify_pa not set to 0). When the link came back up,
enic did not re-enable notification in the NIC.
This affected bonding when a enic slave device link bounced.
The fix is to unconditionally enable notification when the enic is
enabled.
Fixes: 9913fbb91df0 ("enic/base: common code")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
If the nb_pkts parameter to rte_eth_tx_burst() was greater than
the TX descriptor count, a completion was not being requested
from the NIC, so descriptors would not be released back to the
host causing a lock-up.
Introduce a limit of how many TX descriptors can be used in a single
call to the enic PMD burst TX function before requesting a completion.
Fixes: d739ba4c6abf ("enic: improve Tx packet rate")
Signed-off-by: John Daley <johndale@cisco.com>
FreeBSD was not defined in ena_plat.h
ETIME is not defined in FreeBSD.
In file included from DPDK/drivers/net/ena/base/ena_com.h:37:0,
from DPDK/drivers/net/ena/ena_ethdev.h:39,
from DPDK/drivers/net/ena/ena_ethdev.c:41:
DPDK/drivers/net/ena/base/ena_plat.h:48:2: error: #error "Invalid platform"
Fixes: 99ecfbf845b3 ("ena: import communication layer")
Fixes: 9ba7981ec992 ("ena: add communication layer for DPDK")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fix for multiple compilation errors for ICC:
error #188: enumerated type mixed with another type
error #592: variable "flags" is used before its value is set
Fixes: 99ecfbf845b3 ("ena: import communication layer")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
