The timestamp flag needs to be set in the offload flags
for the received pkt in case of PTP offload.
Fixes: b11cceb83a ("net/bnxt: support timesync")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
virtio_dev_free_mbufs was recently modified to free the
virtqueues but failed to check whether the array was
allocated. Added a check to ensure vqs was non-null.
Fixes: bdb32afbb6 ("net/virtio: rationalize queue flushing")
Signed-off-by: David Harton <dharton@cisco.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The eBPF classifier (section "cls_q" in tap_bpf_program.c) is tracing
marked packets in which skb->cb[1] contains an RSS queue number, and
redirects those packets to the matched queue.
It is expected that skb->cb[1] has been previously set with a valid RSS
queue number during an eBPF action (section "l3_l4" in tap_bpf_program.c).
However, for non-RSS flows, skb->cb[1] may contain a random unset value,
which could falsely be interpreted as a valid RSS queue.
To avoid this potential error, tap_bpf_program.c has been updated as
follows:
1. After calculating the RSS queue number, it is added a unique offset in
order to uniquely identify it as a valid RSS queue number.
2. After matching an RSS queue to a packet, skb->cb[1] is set to 0.
Fixes: cdc07e83bb ("net/tap: add eBPF program file")
Fixes: aabe70df73 ("net/tap: add eBPF bytes code")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
TAP device is supporting multi segments Tx, however this capability is
not reported when querying the TAP device.
This commit adds this capability report.
Fixes: 818fe14a98 ("net/tap: use new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Failsafe reported Tx offloads capabilities are the AND result of its
default capabilities and those of its sub-devices.
In the corrupted code failsafe default Tx capabilities were set to 0.
As a result when running testpmd with "--tx-offloads=0x8000" parameter
(request for multi segments offload) - an error was returned:
PMD: net_failsafe:
Some Tx offloads are not supported, requested 0x8000 supported 0x0
To fix this, failsafe default Tx offload capabilities are set to
DEV_TX_OFFLOAD_MULTI_SEGS |
DEV_TX_OFFLOAD_IPV4_CKSUM |
DEV_TX_OFFLOAD_UDP_CKSUM |
DEV_TX_OFFLOAD_TCP_CKSUM,
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The vdev_netvsc driver does periodic detection of PCI devices matched
to the netvsc existed interfaces.
When it finds a match, the PCI address is written to the pipe of the
associated fail-safe PMD instance and a positive value is returned to
the periodic check which is wrongly considered as error.
Change the check to consider only a negative value as error.
Fixes: e7dc5d7bec ("net/vdev_netvsc: implement core functionality")
Signed-off-by: Matan Azrad <matan@mellanox.com>
Fixes: 9e33430517 ("net/qede: fix MTU set and max Rx length")
Fixes: 22d07d939c ("net/qede/base: update")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Few adjustments are required to effectively handle VF vport create/delete
sequence. The problem is exposed by recent ethdev TX offload changes
which requires port to be in down state before applying TX offloads.
- Move vport creation from dev_init() to dev_configure()
- Force to stop vport if it was already started due to previous run
(restart case)
- Move link state enable/disable to dev_init() and dev_close()
respectively.
- For MTU change, recreate vport with new MTU value and restore old
config. This is necessary since VF MTU value can be changed only upon
vport creation.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
ENA device supports Rx jumbo frames and such information needs to
be provided in the offloads flags.
Fixes: 7369f88f88 ("net/ena: convert to new Rx offloads API")
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
IBV_WQ_FLAGS_SCATTER_FCS is a WQ flag to be used to configure the CRC
strip on a queue upon creation.
Using IBV_RAW_PACKET_CAP_SCATTER_FCS instead to query to capability.
Even though this is RAW_QP capability, it is being used by rdma-core to
indicate for both RAW_QP and WQ.
Fixes: 43e9d9794c ("net/mlx5: support upstream rdma-core")
Cc: stable@dpdk.org
Reported-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
A single queue should have the same verbs priority as an RSS one.
Fixes: 8086cf08b2 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
priv_flow_stop() may be called several times, in such situation flows are
already removed from the NIC and thus all associated objects are no present
in the flow object (ibv_flow, indirection tables, ....).
Fixes: 8086cf08b2 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Resources allocated for drop flow rules are not freed properly. This causes
a memory leak and triggers an assertion failure on a reference counter when
compiled in debug mode.
This issue can be reproduced with testpmd by entering the following
commands:
flow create 0 ingress pattern eth / end actions drop / end
port start all
port stop all
port start all
port stop all
quit
The reason is additional references are taken when re-enabling existing
flow rules, a common occurrence when rehashing configuration.
Fixes: d3a7e09234 ("net/mlx4: allocate drop flow resources on demand")
Cc: stable@dpdk.org
Reported-by: Moti Haimovsky <motih@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There's interrupt conflict when using DPDK and Linux i40e
on different ports of the same Ethernet controller, this
patch fixes it by switching from IntN to Int0 if multiple
drivers are used.
Fixes: be6c228d4d ("i40e: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch provides the option to disable writing some global registers
in PMD, in order to avoid affecting other drivers, when multiple drivers
run on the same NIC and control different physical ports. Because there
are few global resources shared among different physical ports.
Fixes: ec246eeb5d ("i40e: use default filter input set on init")
Fixes: 98f0557076 ("i40e: configure input fields for RSS or flow director")
Fixes: f05ec7d77e ("i40e: initialize flow director flexible payload setting")
Fixes: e536c2e328 ("net/i40e: fix parsing QinQ packets type")
Fixes: 19b16e2f64 ("ethdev: add vlan type when setting ether type")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
New testpmd will get CRC strip offload from rx_offload_capa. I40evf
cannot disable CRC strip. And in fact, it is enabled by PF. This
patch solves the issue by adding CRC strip flag into rx_offload_capa
in i40e and i40evf.
Fixes: 8b9bd0efe0 ("app/testpmd: disable Rx VLAN offloads by default")
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The version map filename does not comply with the format
used by meson build rules for drivers (i.e. on the upper
level) and needs to be revisited. This patch removes efx
postfix from the driver title in the filename.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The AVX2 code path includes files from the ethdev, hash and kvargs libs.
These are not listed as dependencies in the case where AVX2 is not in
the default instruction set for the build e.g. machine=nehalem. This
leads to compiler errors as the header files needed cannot be found.
Fixes: e940646b20 ("drivers/net: build Intel NIC PMDs with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The following error is reported when compiling 18.02-rc2 using ICC,
"transfer of control bypasses initialization of".
The patch fixes the issue.
Fixes: 1911c5edc6 ("net/tap: fix eBPF RSS map key handling")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
TAP is a virtual device created on Kernel. The speed of interface is
set by Kernel to a fixed static value. But this does not prevent using
RX or TX to rate limit. Hence removing the option from user arguments.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Wrong function was used for l23 and l34 hashing
slave index was incremented twice.
Fixes: 09150784a7 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
This patch fixes the coverity CHECKED_RETURN issue.
Coverity issue: 257045
Fixes: 48de41ca11 ("net/avf: enable link status update")
Reported-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This commit addresses a case of RSS and non RSS flows mixture.
In the corrupted code, if a non-RSS flow is destroyed, it has an eBPF map
index 0 (initialized upon flow creation). This might unintentionally remove
RSS entry 0 from eBPF map.
To fix this issue, add an offset to the real index during a KEY_CMD_GET
operation, and subtract this offset during a KEY_CMD_RELEASE operation, in
order to restore the real index.
Thus, if a non RSS flow is falsely trying to release map entry 0 - The
offset subtraction will calculate the real map index as an
out-of-range value, and the release operation will be silently ignored.
Fixes: 036d721a82 ("net/tap: implement RSS using eBPF")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
When a user creates an RSS rule, the tap PMD dynamically allocates
a 'flow' data structure, and uploads BPF programs (represented by file
descriptors) to the kernel.
The kernel might reject the rule (due to filters overlap, for example)
in which case, flow memory should be freed and BPF file descriptors
should be closed.
In the corrupted code there were scenarios where BPF file descriptors
were not closed.
The fix is to add a new function - tap_flow_free(), which will make sure
to always close BPF file descriptors before freeing the flow allocated
memory.
Fixes: 036d721a82 ("net/tap: implement RSS using eBPF")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
When mlx5 is not compiled directly as an independent shared object (e.g.
CONFIG_RTE_BUILD_SHARED_LIB not enabled for performance reasons), DPDK
applications inherit its dependencies on libibverbs and libmlx5 through
rte.app.mk.
This is an issue both when DPDK is delivered as a binary package (Linux
distributions) and for end users because rdma-core then propagates as a
mandatory dependency for everything.
Application writers relying on binary DPDK packages are not necessarily
aware of this fact and may end up delivering packages with broken
dependencies.
This patch therefore introduces an intermediate internal plug-in
hard-linked with rdma-core (to preserve symbol versioning) loaded by the
PMD through dlopen(), so that a missing rdma-core does not cause unresolved
symbols, allowing applications to start normally.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This lays the groundwork for externalizing rdma-core as an optional
run-time dependency instead of a mandatory one.
No functional change.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When mlx4 is not compiled directly as an independent shared object (e.g.
CONFIG_RTE_BUILD_SHARED_LIB not enabled for performance reasons), DPDK
applications inherit its dependencies on libibverbs and libmlx4 through
rte.app.mk.
This is an issue both when DPDK is delivered as a binary package (Linux
distributions) and for end users because rdma-core then propagates as a
mandatory dependency for everything.
Application writers relying on binary DPDK packages are not necessarily
aware of this fact and may end up delivering packages with broken
dependencies.
This patch therefore introduces an intermediate internal plug-in
hard-linked with rdma-core (to preserve symbol versioning) loaded by the
PMD through dlopen(), so that a missing rdma-core does not cause unresolved
symbols, allowing applications to start normally.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This lays the groundwork for externalizing rdma-core as an optional
run-time dependency instead of a mandatory one.
No functional change.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch fixes issues reported by Coverity check. Function
parse_rss_action and i40e_config_rss_filter might return at wrong
time which will cause error for RSS configuration and parser. Hash
function variable with 32 bits width might also cause error when
it needs more than 32 bits, so change this variable to 64 bits.
Coverity issue: 257020, 257024, 257037
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fail-safe PMD sub devices management is based on ethdev port mechanism.
So, the sub-devices management structures are exposed to other DPDK
entities which may use them in parallel to fail-safe PMD.
Use the new port ownership mechanism to avoid multiple managments of
fail-safe PMD sub-devices.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Call dedicated ethdev API to free port in remove time as was done in
other fail-safe places.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This commit adds eBPF system call definitions for ARM architecture.
Old Linux header files may not define eBPF system call numbers.
In order to successful compile eBPF on all Linux platforms - the
missing ARM system call definition is explicitly added.
Fixes: b02d85e1 ("net/tap: add eBPF API")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
This patch supports batch processing of multiple packets
in the Rx side
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In the I/O path we were calling rte_dpaa_portal_init which
internally checks if a portal is affined to the core.
But this lead to calling of that non-static API in every call.
Instead check the portal affinity in the caller itself for
performance reasons
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Use the optimized routine for phy to virt conversion,
when the mempool is allocated from physical contiguous memory.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds software prefetching of the annotation which is
accessed by the driver to fetch the parsing results. The changes
also include as many instructions in between prefetching memory
and using it.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Note that the "nicvf" term has been replaced with "thunderx",
as the naming scheme defines that a PMD name should be the
same as the directory that it lives in: drivers/net/thunderx
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Note that the "lio" term has been replaced with "liquidio",
as the naming scheme defines that a PMD name should be the
same as the directory that it lives in: drivers/net/liquidio
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes: 774e9ea919 ("net/dpaa2: add support for multi seg buffers")
Fixes: d2ef05d5c1 ("net/dpaa2: optimize Rx/Tx path")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
By making "compat" lib (which consists of a header only) a dependency of
the EAL, we make the header file available to all other libs, drivers and
apps, and thereby make it less work to do ABI versioning.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The detection of pcap as a dependency involves invoking pcap-config to get
parameters - something not possible in a cross-compilation environment.
Therefore we need to just look for the presence of the library in a
cross-compilation environment and assume if the library is present we can
compile and link against it.
Fixes: efd5d1a8d8 ("drivers/net: build some vdev PMDs with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Any flags added to the project args are automatically added to all builds,
both native and cross-compiled. This is not what we want for the -march
flag as a valid -march for the cross-compile is not valid for pmdinfogen
which is a native-build tool.
Instead we store the march flag as a variable, and add it to the default
cflags for all libs, drivers, examples, etc. This will allow pmdinfogen to
compile successfully in a cross-compilation environment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch changes the build process to group all .o files for a driver or
library into a static archive first, and then link the .o files together
into a shared library. This eliminates the need for separate static or
shared object builds when packaging, for instance.
The "default_library" configuration option now only affects the apps and
examples, which are either linked against the static or shared library
versions depending on the value of the option.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The EAL and compat libraries were special-cases in the library build
process, the former because of it's complexity, and the latter because
it only consists of a single header file.
By reworking the EAL meson.build files, we can eliminate the need for it to
be a special case, by having it build up and return the list of sources,
headers, and objects and return those to the higher level build file. This
should also simplify the building of EAL, as we can eliminate a number of
meson.build files that would no longer be needed, and have fewer, but
larger meson.build files (9 now vs 14 previous) - thereby making the logic
easier to follow and items easier to find.
Once done, we can pull eal into the main library loop, with some
modifications to support it. Compat can also be pulled it once we add in a
check to handle the case of an empty sources list.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add the e1000, fm10k, i40e and ixgbe drivers to the meson & ninja build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Add the af_packet, null, pcap and ring PMDs to the meson build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
This patch defines __NR_bpf for powerpc architecture and hence,
fixes compiling tap driver for this architecture.
Fixes: b02d85e1 ("net/tap: add eBPF API")
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
In failsafe device start can be called for ports/devices that
had been plugged out.
The mlx4 PMD detects device removal by listening to the device RMV
events, when the mlx4 port is being stopped, the PMD no longer
listens to these events causing the PMD to stop detecting device
removals.
This patch fixes this issue by moving installation of the interrupt
handler to device configuration, and toggle only the Rx-queue
interrupts on start/stop.
Fixes: a6e8b01c3c ("net/mlx4: compact interrupt functions")
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Test the return value of ecore_ptt_acquire for NULL.
Coverity issue: 257049
Fixes: d378cefab8 ("net/qede: add support for GENEVE tunneling offload")
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
This patch fixes issues related to MTU set and max_rx_pkt_len usage.
- Adjust MTU during device configuration when jumbo is enabled
- In qede_set_mtu():
Return not supported for VF as currently we do not support it.
Cache new mtu value in mtu_new for proper update.
Add check for RXQ allocation before calculating RX buffer size
if not allocated defer RX buffer size calculation till RXQ setup.
Add check for before performing device start/stop.
- Use max_rx_pkt_len appropriately
- Change QEDE_ETH_OVERHEAD macro to adjust driver specifics
Fixes: 4c4bdadfa9 ("net/qede: refactoring multi-queue implementation")
Fixes: 9a6d30ae6d ("net/qede: refactoring vport handling code")
Fixes: 1ef4c3a5c1 ("net/qede: prevent crash while changing MTU dynamically")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
- Fix incorrect header size. In the tunnel case, the outer L2/L3 lengths
should be included to calculate tunnel header_size.
- In TSO case, skip manipulating TX BD1 and TX BD2 data buffer fields
since those fields are already updated with header and payload lengths
respectively.
- Update TX BD debug data collection.
Fixes: 3d4bb44116 ("net/qede: add fastpath support for VXLAN tunneling")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
- Add a check to verify tunnel IP header checksum is valid and mark MBUF
flag as appropriate.
- Bit of refactoring so that inner frame handling for tunneled packets can
be made common as regular (non-tunneled) packets.
- make qede_tunn_exist() as inline.
- remove RTE_PTYPE_L2_ETHER as default L2 pkt_type.
Fixes: 3d4bb44116 ("net/qede: add fastpath support for VXLAN tunneling")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
By default, the PF driver enables tunnel offload for its child VF.
So mark tunnel offloads as enabled in the VF driver to reflect the
actual state.
Fixes: 52d94b57e1 ("net/qede: add slowpath support for VXLAN tunneling")
Fixes: d378cefab8 ("net/qede: add support for GENEVE tunneling offload")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
This patch adds support for registering and waiting for Rx interrupts.
This allows applications to wait for Rx events from the PMD using the
DPDK rte_epoll subsystem.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
This patch fixes the issue of mlx4 not receiving broadcast packets
when configured to work promiscuous or allmulticast modes.
Fixes: eacaac7bae ("net/mlx4: restore promisc and allmulti support")
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The number of mlx4 present ports is calculated as follows:
conf.ports.present |= (UINT64_C(1) << device_attr.phys_port_cnt) - 1;
That is - all ones sequence (due to -1 subtraction)
When retrieving the number of ports, 1 must be added in order to obtain
the correct number of ports to the power of 2, as follows:
uint32_t ports = rte_log2_u32(conf->ports.present + 1);
If 1 was not added, in the case of one port, the number of ports would
be falsely calculated as 0.
Fixes: 8264279967 ("net/mlx4: check max number of ports dynamically")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch is the last patch in the series of patches aimed
to add support for registering and waiting for Rx interrupts
in failsafe PMD. This allows applications to wait for Rx events
from the PMD using the DPDK rte_epoll subsystem.
The failsafe PMD presents to the application a facade of a single
device to be handled by the application while internally it manages
several devices on behalf of the application including packets
transmission and reception.
The Proposed failsafe Rx interrupt scheme follows this approach.
The failsafe PMD will present the application with a single set of
Rx interrupt vectors representing the failsafe Rx queues, while
internally it will serve as an interrupt proxy for its subdevices.
will allow applications to wait for Rx traffic from the failsafe
PMD by registering and waiting for Rx events from its Rx queues.
In order to support this the following is suggested:
* Every Rx queue in the failsafe (virtual) device will be assigned
* a Linux event file descriptor (efd) and an enable_interrupts flag.
* The failsafe PMD will fill in its rte_intr_handle structure with
the Rx efds assigned previously and register them with the EAL.
* The failsafe driver will create a private epoll fd (epfd) and
* will allocate enough space to handle all the Rx events from all its
subdevices.
* Acting as an application,
for each Rx queue in each active subdevice the failsafe will:
o Register the Rx queue with the EAL.
o Pass the EAL the failsafe private epoll fd as the epfd to
register the Rx queue event on.
o Pass the EAL, as a parameter, the pointer to the failsafe Rx
queue that handles this Rx queue.
o Using the DPDK service callbacks, the failsafe PMD will launch
an Rx proxy service that will Wait on the epoll fd for Rx
events from the sub-devices.
o For each Rx event received the proxy service will
- Retrieve the pointer to failsafe Rx queue that handles
this subdevice Rx queue from the user info returned by the
EAL.
- Trigger a failsafe Rx event on that queue by writing to
the event fd unless interrupts are disabled for that queue.
* The failsafe pmd will also implement the rx_queue_intr_enable
* and rx_queue_intr_disable routines that will enable and disable Rx
interrupts respectively on both on the failsafe and its subdevices.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This commit adds the following functionality to failsafe PMD:
* Register and unregister slaves Rx interrupts.
* Enable and Disable slaves Rx interrupts.
The interrupts events generated by the slaves are not handled in this
commit.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This patch adds registering the Rx queues of the failsafe PMD with EAL
Rx interrupts subsystem.
Each failsafe RX queue is assigned with a unique eventfd and an enable
interrupts flag.
The PMD creates an interrupt vector containing the above eventfds and
Registers it with EAL. The PMD also implements the Rx interrupts enable
and disable interface routines.
This patch does not implement the generation of Rx interrupts, so an
application can now wait for failsafe Rx interrupts but it will not
receive one.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Since in DPDK 17.11 port type was changed from uint8_t to uint16_t
the MBUF_INVALID_PORT value became 0xffff but in mrvl_tx_pkt_burst()
when trying to lookup bpool using mbuf port, we check if the port
is invalid according to value 0xff. This causes segmentation fault.
Solution: since the valid port value cannot exceed RTE_MAX_ETHPORTS
(size of bpool lookup table) any other values consider as invalid so
the packet should be returned to DPDK pool.
Fixes: afb4d0d0bf ("net/mrvl: add Rx/Tx support")
Cc: stable@dpdk.org
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
