Enable users to specify the lcore id that is used as master lcore.
Signed-off-by: Simon Kuenzer <simon.kuenzer@neclab.eu>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In current version, used cores can only be specified using a bitmask.
It will now be possible to specify cores in 2 different ways:
- Using a bitmask (-c [0x]nnn): bitmask must be in hex format
- Using a list in following format: -l <c1>[-c2][,c3[-c4],...]
The letter -l can stand for lcore or list.
-l 0-7,16-23,31 being equivalent to -c 0x80FF00FF
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
No need to have different headers for Linux and BSD.
These files are identicals with exception of internal config which has
uio and vfio fields only useful for Linux.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Adding support for lsc interrupt from bonded device to link
bonding library with supporting unit tests in the test application.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: SunX Jiajia <sunx.jiajia@intel.com>
This patch fixes two occurrences where a call to strncmp had the closing
brace in the wrong place. Changing this form:
if (strncmp(X,Y,sizeof(X) != 0))
which does a comparison of length 1, to
if (strncmp(X,Y,sizeof(X)) != 0)
which does the correct length comparison and then compares the result to
zero in the "if" part, as the author presumably originally intended.
Reported-by: Larry Wang <liang-min.wang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
eal_flags and multiprocess unit tests use --file-prefix option
which is not supported in FreeBSD, so it has been removed
if compiled for this OS.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This field is added for librte_distributor. User of librte_distributor
is advocated to set value of mbuf->hash.usr before calling
rte_distributor_process. The value of usr is the tag which stands as
identifier of flow.
Signed-off-by: Qinglai Xiao <jigsaw@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The unit test can be used to measure cycles per packet in different rx/tx routines.
The NIC works in loopback mode. So it doesn't require test equipment to measure throughput.
As result, the unit test shows the average cycles per packet consuming.
When doing the test, make sure the link is UP.
Usage Example:
1. Run unit test app in interactive mode
app/test -c f -n 4 -- -i
2. Run and wait for the result
pmd_perf_autotest
There's option to choose rx/tx pair, default is vector.
set_rxtx_mode [vector|scalar|full|hybrid]
Note: To get acurate scalar fast, please choose 'vector' or 'hybrid' without INC_VEC=y in config
It supports to measure standalone rx or tx.
Usage Example:
Choose rx or tx standalone, default is both
set_rxtx_anchor [rxtx|rxonly|txonly]
It also supports to measure standalone RX burst cycles.
In this way, it won't repeat re-send received packets.
Now it measures two situations, poll before/after xmit(w or w/o desc. cache conflict)
Usage Example:
Set stream control mode, by default is continuous
set_rxtx_sc [continuous|poll_before_xmit|poll_after_xmit]
Test report: http://dpdk.org/ml/archives/dev/2014-October/007145.html
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Add support to allow packet burst generator to create packets
in different sizes.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Since commit a155d430119 ("support link bonding device initialization"),
rte_eal_pci_probe() is called in rte_eal_init().
pci_autotest called it to bind devices to the test_driver and test_driver2.
Therefore, the function is called twice and devices already allocated
will cause the test fail.
This patch solves that issue, unregistering all previous drivers before
calling rte_eal_pci_probe() for the first time, so DPDK does not try
to allocate data for the devices, binding them to their previous
drivers again.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
As a result of moving tailq's into local memory, some tailq data
is now reserved in rte_malloc heaps (because it needs to be
shared across DPDK processes). The first thing DPDK initializes
is a log mempool, and since it creates a tailq, it reserves
space in rte_malloc heap before allocating the mempool itself.
By default, rte_malloc allocates way more space than is necessary,
so under some conditions (namely, overall memory available is low)
this results in malloc heap eating up so much memory that log
mempool is not able to allocate its memzone.
This patch fixes the unit tests to account for that change.
Reported-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Link bonding broadcast mode requires refcnt parameter in the mbuf struct to
allow efficient transmission of duplicated mbufs on slave ports.
This patch disables broadcast mode when the complication option RTE_MBUF_REFCNT
is disabled to allow clean building of the bonding library.
A warning message notify user of disabling of broadcast mode.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The previous implementation of rte_kni_alloc() was allocating memzones with a
name composed of a fixed string and the interface name. When an application was
allocating and deallocating multiple interfaces with different names, memzones
were quickly exhausted, even though memzones from deallocated interfaces were
never used anymore (unless an interface with the same name was re-allocated).
As a result, the application was unable to allocate more KNI interfaces with
different names.
This patch implements the KNI memzone pool in order to prevent memzone
exhaustion when allocating/deallocating KNI interfaces. It adds a new API call,
rte_kni_init(max_kni_ifaces) that shall be called before any call to
rte_kni_alloc() if KNI is used. The memzones are pre-allocated with interface-
independent names so that they can be reused.
Signed-off-by: Marc Sune <marc.sune@bisdn.de>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The four-byte-key (fbk) autotest was allocating the keys to be used for
the test on the stack. When the number of entries in the table was
increased significantly, for example, to test larger hashes by increase the
value of ENTRIES, this array of keys was greater than that
allowed on the stack, and so caused problems, i.e. crashes and core dumps.
The solution is to have the keys dynamically allocated on the heap using
malloc. Now if ENTRIES is increased and we run out of memory we get an
error message instead of a crash.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The function rte_snprintf() was deprecated in version 1.7.0
(commit 6f41fe75e2dd).
It's now totally removed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Since commit a155d430119 ("support link bonding device initialization"),
rte_eal_pci_probe() is called in rte_eal_init().
So it doesn't have to be called by application anymore.
It has been fixed for testpmd in commit 2950a769315,
and this patch remove it from other applications.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This change splits the mbuf in two to move the pool and next pointers to
the second cache line. This frees up 16 bytes in first cache line.
The reason for this change is that we believe that there is no possible
way that we can ever fit all the fields we need to fit into a 64-byte
mbuf, and so we need to start looking at a 128-byte mbuf instead. Examples
of new fields that need to fit in, include -
* 32-bits more for filter information for support for the new filters in
the i40e driver (and possibly other future drivers)
* an additional 2-4 bytes for storing info on a second vlan tag to allow
drivers to support double Vlan/QinQ
* 4-bytes for storing a sequence number to enable out of order packet
processing and subsequent packet reordering
as well as potentially a number of other fields or splitting out fields
that are superimposed over each other right now, e.g. for the qos scheduler.
We also want to allow space for use by other non-Intel NIC drivers that may
be open-sourced to dpdk.org in the future too, where they support fields
and offloads that currently supported hardware doesn't.
If we accept the fact of a 2-cache-line mbuf, then the issue becomes
how to rework things so that we spread our fields over the two
cache lines while causing the lowest slow-down possible. The general
approach that we are looking to take is to focus the first cache
line on fields that are updated on RX , so that receive only deals
with one cache line. The second cache line can be used for application
data and information that will only be used on the TX leg. This would
allow us to work on the first cache line in RX as now, and have the
second cache line being prefetched in the background so that it is
available when necessary. Hardware prefetches should help us out
here. We also may move rarely used, or slow-path RX fields e.g. such
as those for chained mbufs with jumbo frames, to the second
cache line, depending upon the performance impact and bytes savings
achieved.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The mbuf structure already contains a pointer to the beginning of the
buffer (m->buf_addr). It is not needed to use 8 bytes again to store
another pointer to the beginning of the data.
Using a 16 bits unsigned integer is enough as we know that a mbuf is
never longer than 64KB. We gain 6 bytes in the structure thanks to
this modification.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated to apply to latest on mainline.
* Disabled vector PMD in config as it relies heavily on the mbuf layout
This will be re-enabled in a subsequent commit once vPMD has been
reworked to take account of mbuf changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The vlan_macip structure combined a vlan tag id with l2 and l3 headers
lengths for tracking offloads. However, this structure was only used as
a unit by the e1000 and ixgbe drivers, not generally.
This patch removes the structure from the mbuf header and places the
fields into the mbuf structure directly at the required point, without
any net effect on the structure layout. This allows us to treat the vlan
tags and header length fields as separate for future mbuf changes. The
drivers which were written to use the combined structure still do so,
using a driver-local definition of it.
Reduce perf regression caused by splitting vlan_macip field. This is
done by providing a single uint16_t value to allow writing/clearing
the l2 and l3 lengths together. There is still a small perf hit to the
slow path TX due to the reads from vlan_tci and l2/l3 lengths being
separated. (<5% in my tests with testpmd with no extra params).
Unfortunately, this cannot be eliminated, without restoring the vlan
tags and l2/l3 lengths as a combined 32-bit field. This would prevent
us from ever looking to move those fields about and is an artificial tie
that applies only for performance in igb and ixgbe drivers. Therefore,
this patch keeps the vlan_tci field separate from the lengths as the
best solution going forward.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mbuf has been removed, we can merge the
rte_pktmbuf into the rte_mbuf structure.
Advantages of doing this:
- the access to mbuf fields is easier (ex: m->data instead of m->pkt.data)
- make the structure more consistent: for instance, there was no reason
to have the ol_flags field in rte_mbuf
- it will allow a deeper reorganization of the rte_mbuf structure in the
next commits, allowing to gain several bytes in it
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
[Bruce: updated for latest code and new example apps]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The initial role of rte_ctrlmbuf is to carry generic messages (data
pointer + data length) but it's not used by the DPDK or it applications.
Keeping it implies:
- loosing 1 byte in the rte_mbuf structure
- having some dead code rte_mbuf.[ch]
This patch removes this feature. Thanks to it, it is now possible to
simplify the rte_mbuf structure by merging the rte_pktmbuf structure
in it. This is done in next commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated patch to HEAD.
* Modified patch to retain the old function names for ctrl mbufs as
macros. This helps with app compatibility, and allows the concept
of a control mbuf to be reintroduced via a single-bit flag in
a future change.
* Updated the packet framework ip_pipeline example application to
work following this change.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
It seems that RTE_MBUF_SCATTER_GATHER is not the proper name for the
feature it provides. "Scatter gather" means that data is stored using
several buffers. RTE_MBUF_REFCNT seems to be a better name for that
feature as it provides a reference counter for mbufs.
The macro RTE_MBUF_SCATTER_GATHER is poisoned to ensure this
modification is seen by drivers or applications using it.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Make ACL library to build/work on 'default' architecture:
- make rte_acl_classify_scalar really scalar
(make sure it wouldn't use sse4 instrincts through resolve_priority()).
- Provide two versions of rte_acl_classify code path:
rte_acl_classify_sse() - could be build and used only on systems with sse4.2
and upper, return -ENOTSUP on lower arch.
rte_acl_classify_scalar() - a slower version, but could be build and used
on all systems.
- Addition of a new function rte_acl_classify_alg. This function lets you
specify an enum value to override the acl contexts default algorithm when doing
a classification. This allows an application to specify a classification
algorithm without needing to publicize each method. I know there was concern
over keeping those methods public, but we don't have a static ABI at the moment,
so this seems to me a reasonable thing to do, as it gives us less of an ABI
surface to worry about.
- keep common code shared between these two codepaths.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Avoid building tests if their counterparts are not selected in config.
This has the nice side effect of fixing build errors when disabling parts of
the dpdk.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The builtin commands list is now empty, we can remove it.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Remove all tests from the builtin commands list and use the dynamic commands
list register macro.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch adds a way to dynamically add a test without modifying commands.c.
Move all current tests in a builtin_commands[] list, next patch will convert
them to this new system.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This test is not linked to any code, remove it.
It may be some leftover from 24f42575dfe2226f126546d0ca501cba9fbd6373.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
refcnt field can not be accessed directly as it depends on the RTE_MBUF_REFCNT
build option.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
No need to test some build option multiple times in a Makefile.
Besides, such option is needed by the associated app, so move it at the
top of the Makefile.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
- Fix bonding unit test suite which was failing due to a change
in pmd configuration behaviour introduced in commit
a130f531187249a88 (add link state interrupt flag)
- Added fixes to allow the ability to re-run test suite from test
application without restarting application
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
- Adding common test assertion macros for unit testing
- Structs for encapsulating unit tests / test suites data.
- test suite runner method
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Rename structure and add a data pointer.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As this unit test does not create devices anymore,
and uses devices created by EAL option --vdev,
there were unnecesary tests that were repeated,
so they have been removed.
So now there are three tests:
1 - Test two devices that share a ring, one device
with just one RX queue and the other with one
TX queue.
2 - Test a device connected to itself (loopback) by
a ring, with both RX and TX queue.
3 - Test two devices that share a ring, but both devices
with RX and TX queue, so they can send packets to themselves
and to the other device.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
In EAL flags unit test, vdev test was being included
(and broken) in whitelist test. It has been separated
in different test and fixed, by calling another
primary process, instead of a secondary one.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Cmdline unit test calls several functions that use snprintf,
with NULL pointer as the destination buffer. This patch
eliminates these NULL pointer tests.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
There were 2 typos since these commits (in 1.6.0 releases):
21a7f4e264 fix build without librte_cmdline
cac6d08c8b replace --use-device option by --pci-whitelist and --vdev
In makefiles, the build options are prefixed with CONFIG_RTE_
but in .c file, it is only RTE_.
These typos were disabling cmdline unit tests and test of "--vdev eth_ring" option.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Including:
- code to generate packet bursts for testing rx and tx
functionality of bonded device
- virtual/stubbed out ethdev for use as slave ethdev in testing
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The function rte_snprintf serves no useful purpose. It is the
same as snprintf() for all valid inputs. Deprecate it and
replace all uses in current code.
Leave the tests for the deprecated function in place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Mark the rte_log, cmdline_printf and rte_snprintf functions as
being printf-style functions. This causes compilation errors
due to mis-matched parameter types, so the parameter types are
fixed where appropriate.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Fix typos and false assumptions in malloc unit tests.
Without enhancements to lib rte_malloc, malloc autotest fails every
second (2nd) run. With enhancements, malloc autotest fails in
function test_multi_alloc_statistics, because we compare the wrong
sets of statistics.
Signed-off-by: Robert Sanford <rsanford2@gmail.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Unit tests for Packet Framework libraries.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Unlike igb_uio, VFIO interrupt type is not set by kernel module
parameters but is set up via ioctl() calls at runtime. This warrants
a new EAL command-line parameter. It will have no effect if VFIO is
not compiled, but will set VFIO interrupt type to either "legacy", "msi"
or "msix" if VFIO support is compiled. Note that VFIO initialization
will fail if the interrupt type selected is not supported by the system.
If the interrupt type parameter wasn't specified, VFIO will try all
interrupt types (starting with MSI-X).
In unit tests, we don't know if VFIO is compiled (eal_vfio.h header is
internal to Linuxapp EAL), so we check this flag regardless.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Rename the RTE_PCI_DRV_NEED_IGB_UIO to be more generic.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Add a set of unit tests and some basic performance test for the
distributor library. These tests cover all the major functionality of
the library on both distributor and worker sides.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
