Neither upstream kernel nor MLNX_OFED support such filter.
There is no point announcing this feature.
Reverts commit 0fb2c9842b20 ("net/mlx5: support IPv4 time-to-live filter")
Fixes: 0fb2c9842b20 ("net/mlx5: support IPv4 time-to-live filter")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch updates mlx4 Rx offload capabilities to also indicate that
Rx CRC stripping is (always) supported.
Since the device does not support disabling CRC stripping the PMD
silently ignores such requests.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The hw flags are not read correctly: the defines
RX_PKT_CMPL_FLAGS_ITYPE_* are not bits but values, so the should not be
tested with if (value & X) but with if ((value & MASK) == X).
This was resulting in a wrong packet type.
For instance, an IPv4/ICMP packet was returning a value of 7 for
the layer 4, which is undefined.
This patch rework the way packet types are processed, to ensure
that only valid packet types will be advertised.
Fixes: 3d2a6644eb05 ("net/bnxt: support getting ptypes")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is no need to return an error if an existing MAC is added.
Fixes: 778b759ba10e ("net/bnxt: add MAC address")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not parsing for 100G speed correctly.
With this patch we should be able to configure 100G link.
Fixes: 90ed2b72291a ("net/bnxt: add 100G speed detection")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When Autoneg is turned off especially on remote side,
link does not come up. This patch fixes that.
Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix the Rx offload flags when the IP or L4 checksum is seen as incorrect
by the hardware. In this case, the proper value is PKT_RX_IP_CKSUM_BAD.
PKT_RX_IP_CKSUM_NONE means that the checksum may be incorrect in the
packet headers, but the integrity of the IP header is verified. This is
mostly useful for virtual drivers.
Fixes: 7ec39d8c524b ("net/bnxt: update status of Rx IP/L4 CKSUM")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch complements the partial cleanup done inside
eth_dev_tap_create when the routine failed.
Such a failure left a non-functional device attached to the system.
Fixes: 050fe6e9ff97 ("drivers/net: use ethdev allocation helper for vdev")
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
testpmd needs to get CRC strip offload from rx_offload_capa with a
recent change. This patch adds CRC strip flag to rx_offload_capa
for ixgbe and ixgbevf, as they have the capability.
Fixes: 8b9bd0efe0b6 ("app/testpmd: disable Rx VLAN offloads by default")
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This reverts commit 7b7711bea5f4 ("net/i40e/base: enhance loopback
AQ command").
It was to support multiple type of loopbacks, which results to
configuration error about adminq. So revert it as agreed.
Fixes: 7b7711bea5f4 ("net/i40e/base: enhance loopback AQ command")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Report error message if clearing O_NONBLOCK flag will fail,
then return from function.
Coverity issue: 143439
Fixes: ef53b6030039 ("net/virtio-user: support LSC")
Cc: stable@dpdk.org
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Should be not possible to load conflicting DDP profiles. Only DDP
profiles of the same group (not 0) can be loaded together. If DDP
profile group is 0, it is exclusive, i.e. it cannot be loaded with
any other DDP profile. If DDP profile groups are different, these
profiles cannot be loaded together.
Fixes: b319712f53c8 ("net/i40e: extended list of operations for DDP processing")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
priv_tx_uar_remap() is wrongly considering the queue is already configured
and thus present in the queue array of the device.
Fixes: f8b9a3bad467 ("net/mlx5: install a socket to exchange a file descriptor")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
An RSS configuration without a key is valid according to the
rte_eth_rss_conf API definition.
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Reported-by: Yuanhan Liu <yliu@fridaylinux.org>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Since rdma-core glue libraries are intrinsically tied to their respective
PMDs and used as internal plug-ins, their presence in the default search
path among other system libraries for the dynamic linker is not necessarily
desired.
This commit enables their installation and subsequent look-up at run time
in RTE_EAL_PMD_PATH if configured to a nonempty string. This path can also
be overridden by environment variables MLX[45]_GLUE_PATH.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When built as separate objects, these libraries do not have unique names.
Since they do not maintain a stable ABI, loading an incompatible library
may result in a crash (e.g. in case multiple versions are installed).
This patch addresses the above by versioning glue libraries, both on the
file system (version suffix) and by comparing a dedicated version field
member in glue structures.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
For consistency since these includes are already pulled by others.
Fixes: 4eba244b78ec ("net/mlx4: move rdma-core calls to separate file")
Fixes: 0e83b8e536c1 ("net/mlx5: move rdma-core calls to separate file")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This code should catch mistakes early if a glue structure member is added
without a corresponding implementation in the library.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The timestamp flag needs to be set in the offload flags
for the received pkt in case of PTP offload.
Fixes: b11cceb83a34 ("net/bnxt: support timesync")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
virtio_dev_free_mbufs was recently modified to free the
virtqueues but failed to check whether the array was
allocated. Added a check to ensure vqs was non-null.
Fixes: bdb32afbb610 ("net/virtio: rationalize queue flushing")
Signed-off-by: David Harton <dharton@cisco.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The eBPF classifier (section "cls_q" in tap_bpf_program.c) is tracing
marked packets in which skb->cb[1] contains an RSS queue number, and
redirects those packets to the matched queue.
It is expected that skb->cb[1] has been previously set with a valid RSS
queue number during an eBPF action (section "l3_l4" in tap_bpf_program.c).
However, for non-RSS flows, skb->cb[1] may contain a random unset value,
which could falsely be interpreted as a valid RSS queue.
To avoid this potential error, tap_bpf_program.c has been updated as
follows:
1. After calculating the RSS queue number, it is added a unique offset in
order to uniquely identify it as a valid RSS queue number.
2. After matching an RSS queue to a packet, skb->cb[1] is set to 0.
Fixes: cdc07e83bb24 ("net/tap: add eBPF program file")
Fixes: aabe70df73a3 ("net/tap: add eBPF bytes code")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
TAP device is supporting multi segments Tx, however this capability is
not reported when querying the TAP device.
This commit adds this capability report.
Fixes: 818fe14a9891 ("net/tap: use new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Failsafe reported Tx offloads capabilities are the AND result of its
default capabilities and those of its sub-devices.
In the corrupted code failsafe default Tx capabilities were set to 0.
As a result when running testpmd with "--tx-offloads=0x8000" parameter
(request for multi segments offload) - an error was returned:
PMD: net_failsafe:
Some Tx offloads are not supported, requested 0x8000 supported 0x0
To fix this, failsafe default Tx offload capabilities are set to
DEV_TX_OFFLOAD_MULTI_SEGS |
DEV_TX_OFFLOAD_IPV4_CKSUM |
DEV_TX_OFFLOAD_UDP_CKSUM |
DEV_TX_OFFLOAD_TCP_CKSUM,
Fixes: a46f8d584eb8 ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The vdev_netvsc driver does periodic detection of PCI devices matched
to the netvsc existed interfaces.
When it finds a match, the PCI address is written to the pipe of the
associated fail-safe PMD instance and a positive value is returned to
the periodic check which is wrongly considered as error.
Change the check to consider only a negative value as error.
Fixes: e7dc5d7becc5 ("net/vdev_netvsc: implement core functionality")
Signed-off-by: Matan Azrad <matan@mellanox.com>
Fixes: 9e334305178f ("net/qede: fix MTU set and max Rx length")
Fixes: 22d07d939c3c ("net/qede/base: update")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Few adjustments are required to effectively handle VF vport create/delete
sequence. The problem is exposed by recent ethdev TX offload changes
which requires port to be in down state before applying TX offloads.
- Move vport creation from dev_init() to dev_configure()
- Force to stop vport if it was already started due to previous run
(restart case)
- Move link state enable/disable to dev_init() and dev_close()
respectively.
- For MTU change, recreate vport with new MTU value and restore old
config. This is necessary since VF MTU value can be changed only upon
vport creation.
Fixes: ec94dbc57362 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
ENA device supports Rx jumbo frames and such information needs to
be provided in the offloads flags.
Fixes: 7369f88f88c0 ("net/ena: convert to new Rx offloads API")
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
IBV_WQ_FLAGS_SCATTER_FCS is a WQ flag to be used to configure the CRC
strip on a queue upon creation.
Using IBV_RAW_PACKET_CAP_SCATTER_FCS instead to query to capability.
Even though this is RAW_QP capability, it is being used by rdma-core to
indicate for both RAW_QP and WQ.
Fixes: 43e9d9794cde ("net/mlx5: support upstream rdma-core")
Cc: stable@dpdk.org
Reported-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
A single queue should have the same verbs priority as an RSS one.
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
priv_flow_stop() may be called several times, in such situation flows are
already removed from the NIC and thus all associated objects are no present
in the flow object (ibv_flow, indirection tables, ....).
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Resources allocated for drop flow rules are not freed properly. This causes
a memory leak and triggers an assertion failure on a reference counter when
compiled in debug mode.
This issue can be reproduced with testpmd by entering the following
commands:
flow create 0 ingress pattern eth / end actions drop / end
port start all
port stop all
port start all
port stop all
quit
The reason is additional references are taken when re-enabling existing
flow rules, a common occurrence when rehashing configuration.
Fixes: d3a7e09234e4 ("net/mlx4: allocate drop flow resources on demand")
Cc: stable@dpdk.org
Reported-by: Moti Haimovsky <motih@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There's interrupt conflict when using DPDK and Linux i40e
on different ports of the same Ethernet controller, this
patch fixes it by switching from IntN to Int0 if multiple
drivers are used.
Fixes: be6c228d4da3 ("i40e: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch provides the option to disable writing some global registers
in PMD, in order to avoid affecting other drivers, when multiple drivers
run on the same NIC and control different physical ports. Because there
are few global resources shared among different physical ports.
Fixes: ec246eeb5da1 ("i40e: use default filter input set on init")
Fixes: 98f055707685 ("i40e: configure input fields for RSS or flow director")
Fixes: f05ec7d77e41 ("i40e: initialize flow director flexible payload setting")
Fixes: e536c2e32883 ("net/i40e: fix parsing QinQ packets type")
Fixes: 19b16e2f6442 ("ethdev: add vlan type when setting ether type")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
New testpmd will get CRC strip offload from rx_offload_capa. I40evf
cannot disable CRC strip. And in fact, it is enabled by PF. This
patch solves the issue by adding CRC strip flag into rx_offload_capa
in i40e and i40evf.
Fixes: 8b9bd0efe0b6 ("app/testpmd: disable Rx VLAN offloads by default")
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The version map filename does not comply with the format
used by meson build rules for drivers (i.e. on the upper
level) and needs to be revisited. This patch removes efx
postfix from the driver title in the filename.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The AVX2 code path includes files from the ethdev, hash and kvargs libs.
These are not listed as dependencies in the case where AVX2 is not in
the default instruction set for the build e.g. machine=nehalem. This
leads to compiler errors as the header files needed cannot be found.
Fixes: e940646b20fa ("drivers/net: build Intel NIC PMDs with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The following error is reported when compiling 18.02-rc2 using ICC,
"transfer of control bypasses initialization of".
The patch fixes the issue.
Fixes: 1911c5edc6cd ("net/tap: fix eBPF RSS map key handling")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
