Clear link state information during device start for fetching new state
before function completion.
Fixes: 605164c8e79d ("net/liquidio: add API to validate VF MTU")
Cc: stable@dpdk.org
Signed-off-by: Chuhong Yao <ych@panath.cn>
Acked-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
For frames where the hardware is not able to calculate checksum
we are indicating such frames to be bad. And that is incorrect.
Indicate PKT_RX_IP_CKSUM_UNKNOWN or PKT_RX_L4_CKSUM_UNKNOWN
for such frames.
Fixes: 7ec39d8c524b ("net/bnxt: update status of Rx IP/L4 CKSUM")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Query of port stats is permitted for VF interfaces as well.
Fix the code to allow VFs to query port stats.
Fixes: bfb9c2260be2 ("net/bnxt: support xstats get/reset")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If the resource requirement of a VF is more than what is allotted
to it by the FW, a VF can request to reallocate some of the resources.
This is possible only when the NIC is running the Resource Manager aware
CHiMP FW.
If necessary, calculate Tx and Rx ring count using the new RM API.
Otherwise use the Tx and Rx ring count as-is. Update the cp ring count
based on the Tx and Rx ring count.
Fixes: b7778e8a1c00 ("net/bnxt: refactor to properly allocate resources for PF/VF")
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In order to save completion resource, use the first completion ring from
PF or VF as the default completion ring for async event & HWRM forward
response handling. Add bnxt_hwrm_set_async_event_cr() to set
async_event_cr for either PF or VF.
Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")
Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While configuring RSS, the FW needs to know the rss_hash_mode that needs
to be initialized.
Set hash mode to HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT
to allow the FW to use the global mode already configured in the device.
Fixes: bcd4bcc4426f ("net/bnxt: configure RSS")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We were initializing Tx and Rx burst functions only for primary
processes. Fixing it in this patch.
Fixes: 88920136688c ("net/bnxt: support xstats get by id")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The FALLTHROUGH comment for cascading switch cases was missing in
a few places. This patch adds that.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Since ConnectX-5, SW parser just complements HW parser. SW parser starts to
engage only if HW parser can't reach a header. For the older devices, HW
parser will not kick in if any of SWP offsets is set. Therefore, all of the
L3 offsets should be set regardless of HW offload. As IPv6 doesn't have
header checksum, the mbuf can't have PKT_TX_[OUTER_]IP_CKSUM if outer or
inner L3 is IPv6.
And if inner packet isn't IP, the inner offsets shouldn't be set.
Fixes: 5f8ba81c4228 ("net/mlx5: support generic tunnel offloading")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Xueming Li <xuemingl@mellanox.com>
Since we move to new offload APIs, IXGBE_SIMPLE_FLAGS is not used.
Fixes: 51215925a32f ("net/ixgbe: convert to new Tx offloads API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
When the fail-safe device is reconfigured, it attempts to register
again for the sub-devices LSC and RMV events.
Prevent an event registration if it is already done.
Fixes: 598fb8aec6f6 ("net/failsafe: support device removal")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The fail-safe PMD registers to RMV event for each removable sub-device
port in order to cleanup the sub-device resources and switch the Tx
sub-device directly when it is plugged-out.
During removal time, the fail-safe PMD stops and closes the sub-device
but it doesn't unregister the LSC and RMV callbacks of the sub-device
port.
It can lead the callbacks to be called for a port which is no more
associated with the fail-safe sub-device, because there is not a
guarantee that a sub-device gets the same port ID for each plug-in
process. This port, for example, may belong to another sub-device of a
different fail-safe device.
Unregister the LSC and RMV callbacks for sub-devices which are not
used.
Fixes: 598fb8aec6f6 ("net/failsafe: support device removal")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Since commit 97b2217ae5bc ("net/mlx4: advertise supported RSS hash
functions"), this PMD includes two similar-looking functions that convert
RSS hash fields between Verbs and DPDK formats.
This patch refactors them as a single two-way function and gets rid of
redundant helper macros.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Below commit documents 0 as a value standing for a default set of RSS hash
types, however the mlx4 PMD doesn't interpret it correctly and still uses
its own internal special value for that (-1).
Also, its function prototype was not updated.
Fixes: ac8d22de2394 ("ethdev: flatten RSS configuration in flow API")
Fixes: 1d173da83ef2 ("net/mlx4: fix default RSS hash fields")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Cleanup remain dependency on old rxmode flags since we move to
new offload APIs.
Fixes: c3ac7c5b0b8a ("net/i40e: convert to new Rx offloads API")
Fixes: e0cb96204b71 ("net/i40e: add support for representor ports")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
rte_eth_bond_8023ad_slave_info() wasn't exported in the original work.
Useful to extract information about the current 802.3ad state.
Fixes: 46fb43683679 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The vdev_netvsc driver allows an automatic probe in Hyper-V VM systems
unless it was already specified by the EAL command line.
The detection of a specified NetVSC device is wrongly done by comparing
the vdev_netvsc driver name to all the vdev devices names, including
the suffix device index. Thus, if the user specifies the vdev_netvsc
device by adding an index to the device name, the comparison fails.
Consequently, the vdev_netvsc driver may automatically probe NetVSC
devices, despite the NetVSC device that was specified by the EAL command
line.
Compare the vdev_netvsc driver name to the devices names without the
index.
Fixes: 56252de779a6 ("net/vdev_netvsc: add automatic probing")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Fixes: fbe90cdd776c ("ethdev: add probing finish function")
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Acked-by: John Miller <john.miller@atomicrules.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
Following error reported by cppcheck:
(error) Shifting signed 32-bit value by 31 bits is
undefined behaviour. The patch fixes it.
Fixes: 8db9e2a1b232 ("i40e: base driver")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This commit fixes a compilation error if EM_PMD is
not defined, bug IGB_PMD is. The root cause of the
issue was that log init variables are declared as
extern in a header file, while the definition of the
variables was in e1000_ethdev.c. Hence, the definitions
were not available if the e1000 PMD is disabled.
To fix this, a new file is added e1000_logs.c, which
matches the e1000_logs.h header. The log variables are
always compiled in, but the PMD logs are only registered
if a PMD is enabled in the configuration. Extra checks
are added in order to avoid duplicate registering.
Fixes: ed5bbb767c3e ("net/e1000: implement dynamic logging")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
With the commit af4f09f28294 ("net/mlx5: prefix all functions with mlx5"),
mlx5_xstats_get() is not compliant any longer with the api.
It always returns the caller max entries count while it should return how
many entries it wrote/wanted to write.
Fixes: af4f09f28294 ("net/mlx5: prefix all functions with mlx5")
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
TAP device is created following its first queue creation. Multiple
queues can be added or removed over time. In Linux terminology those
are file descriptors which are opened or closed over time. As long as
the number of opened file descriptors is positive - TAP device will
appear as a Linux device. In case all queues are released (the
equivalent of all file descriptors being closed) the TAP device will
be removed. This can lead to abnormalities in different scenarios
where the TAP device should exist even if all its queues are released.
In order to make TAP existence independent of its number of queues -
an extra file descriptor is opened on TAP creation and is closed on
TAP closure. Its only purpose is to serve as a keep-alive mechanism
for the TAP device.
Fixes: bf7b7f437b49 ("net/tap: create netdevice during probing")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Add force_link_up devargs to always force link as up for VFs.
This enables VFs on the same NIC to send traffic to each other
even when physical link is down.
Also add RTE_PMD_REGISTER_PARAM_STRING to export all supported
devargs.
Fixes: 011ebc236ddc ("net/cxgbe: add skeleton VF driver")
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The resetting of stats on a VF involves the setting of an offset
that is subtracted from future calls, rather zeroing of counters.
However doing a stats reset on the port representor was also
adjusting the values forwarded to the VF, which had the effect of
corrupting the VF's counters. The fix is for the port representor
to maintain its own stats offset, so the port representor and VF
maintain independently-resettable counters.
Fixes: e0cb96204b71 ("net/i40e: add support for representor ports")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The old ixgbe_vlan_offload_set() is called by
rte_eth_dev_set_vlan_offload() which is meant to config VLAN
strip/filter/extend on all queues.
This old function is also called by rte_eth_dev_start()/ixgbe_dev_start()
which need support per-queue VALN strip on only parts of queues.
So add new function ixgbe_vlan_offload_config() =
old ixgbe_vlan_offload_set().
This new function is called by ixgbe_dev_start() to support VLAN strip
per-queue configuration.
New ixgbe_vlan_offload_set() = codes to align VLAN strip flags on all
queues with port level setting + new ixgbe_vlan_offload_configure().
The 2nd function is called by rte_eth_dev_set_vlan_offload to support
configure VLAN strip on all queues of whole port.
Fixes: 216f78f4d53f ("net/ixgbe: support VLAN strip per queue offloading in PF")
Fixes: 860a94d3c692 ("net/ixgbe: support VLAN strip per queue offloading in VF")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There is no need to return failure (-EEXIST) when the requested
filter is already configured.
Fixes: d6cb17535f88 ("net/qede: fix VLAN filters")
Fixes: 77fac1b54fc9 ("net/qede: fix filtering code")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Reduce the verbosity in ecore_pglueb_rbc_attn_handler() while logging
errmsg during HW init. This could happen due to ungraceful exit of
previous driver instance.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch removes unnecessary check in ixgbe_check_mq_mode, which
fixes the DCB configuration issue.
Fixes: 27b609cbd1c6 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
rte_cryptodev_get_header_session_size() and
rte_cryptodev_get_private_session_size() functions are
targeting symmetric sessions.
With the future addition of asymmetric operations,
these functions need to be renamed from *cryptodev_*_session_*
to *cryptodev_sym_*_session_* to be symmetric specific.
The two original functions are marked as deprecated
and will be removed in 18.08, so applications can still
use the functions in 18.05.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
The list of workers cores was represented by 64-bit bitmask.
It doesn't work if system has cores with id higher than 63.
This fix changes list of workers cores to array of uint16_t.
The size of array equals to RTE_MAX_LCORE.
Fixes: 4c07e0552f0a ("crypto/scheduler: add multicore scheduling mode")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
qp->temp_digest is already an array of uint8_t,
so no need to cast to uint8_t*.
Fixes: baf1e63bfd65 ("crypto/aesni_gcm: do not append digest")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Missing AES-CMAC supported parameters
in PMD capabilities.
Fixes: 6491dbbecebb ("crypto/aesni_mb: support AES CMAC")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
This patch fixes the possible duplicated ring names in multi-core
scheduler. Originally two or more multi-core schedulers may have
same worker ring names thus will cause initialization error.
Fixes: 4c07e0552f0a ("crypto/scheduler: add multicore scheduling mode")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When scheduler mode changed from multicore to roundrobin and
back to multicore, scheduler tries to create memory rings with
the same name and fails. The fix allows to lookup and re-use
previously allocated memory rings.
Fixes: 4c07e0552f0a ("crypto/scheduler: add multicore scheduling mode")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Tested-by: Reshma Pattan <reshma.pattan@intel.com>
There are some resource leaks in ifpga_scan_one.
This patch fixes it.
Coverity issue: 279459
Fixes: 05fa3d4a6539 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
The control variable should be afu_dev not dev.
Coverity issue: 279455
Fixes: 05fa3d4a6539 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
A device like failsafe can manage sub-devices.
When removing such device, it removes its sub-devices
and try to take the same vdev_device_list_lock.
It was causing a deadlock because the lock was not recursive.
Fixes: 35f462839b69 ("bus/vdev: add lock on device list")
Suggested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Matan Azrad <matan@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The patch fixes the compile issue with clang on ARM64, as well as
clang + X86 builing hosts.
Newly introduced #pragma pack(1) in the header file caused compiling
issues for the files who included it.
In file included from drivers/raw/ifpga_rawdev/base/ifpga_fme_dperf.c:5:
In file included from drivers/raw/ifpga_rawdev/base/ifpga_feature_dev.h:8:
drivers/raw/ifpga_rawdev/base/ifpga_hw.h:8:10: error:
the current #pragma pack alignment value is modified in the included file
The fix is to change the #pragma pack alignment locally and not have
effect on other files who included this header file.
Fixes: 56bb54ea1bdf ("raw/ifpga/base: add Intel FPGA OPAE share code")
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds a pair of "()" to embrace the argument
input to the function-like macro invocation.
drivers/net/mlx5/mlx5_rxtx_vec.c:37:
drivers/net/mlx5/mlx5_rxtx_vec_neon.h:170:24: error: too many arguments
provided to function-like macro invocation
(uint16x8_t) { 0, 0, cs_flags, rte_cpu_to_be_16(len),
Fixes: 570acdb1da ("net/mlx5: add vectorized Rx/Tx burst for ARM")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Signed-off-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The value of rte_errno must be positive in case of an error.
Fixes: d77d07391d4d ("net/sfc: support flow API RSS action")
Cc: stable@dpdk.org
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch addresses the following issues reported by cppcheck:
[drivers/net/mlx4/mlx4_rxtx.c:266]: (error) Shifting signed 32-bit value
by 31 bits is undefined behaviour
[drivers/net/mlx4/mlx4_rxtx.c:624]: (error) Shifting signed 32-bit value
by 31 bits is undefined behaviour
[drivers/net/mlx4/mlx4_txq.c:89]: (error) Shifting signed 32-bit value by
31 bits is undefined behaviour
[drivers/net/mlx4/mlx4_txq.c:91]: (error) Shifting signed 32-bit value by
31 bits is undefined behaviour
Fixes: 78e81a9844f8 ("net/mlx4: merge Tx queue rings management")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
