Hairpin between two ports will be supported by mlx5 PMD.
The supported scenarios and limitations are listed in "mlx5.rst".
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
PMD supports thread-safe flow operations. Set the
RTE_ETH_DEV_FLOW_OPS_THREAD_SAFE dev_flag to indicate this info
to the application. rte_flow API functions can avoid using its
own mutex for safe multi-thread flow handling.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
VXLAN decap offload can happen in stages. The offload request may
not come as a single flow request rather may come as two flow offload
requests F1 & F2. This patch is adding support for this two stage
offload design. The match criteria for F1 is O_DMAC, O_SMAC,
O_DST_IP, O_UDP_DPORT and actions are COUNT, MARK, JUMP. The match
criteria for F2 is O_SRC_IP, O_DST_IP, VNI and inner header fields.
F1 and F2 flow offload requests can come in any order. If F2 flow
offload request comes first then F2 can’t be offloaded as there is
no O_DMAC information in F2. In this case, F2 will be deferred until
F1 flow offload request arrives. When F1 flow offload request is
received it will have O_DMAC information. Using F1’s O_DMAC, driver
creates an L2 context entry in the hardware as part of offloading F1.
F2 will now use F1’s O_DMAC to get the L2 context id associated with
this O_DMAC and other flow fields that are cached already at the time
of deferring F2 for offloading. F2s that arrive after F1 is offloaded
will be directly programmed and not cached.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Supports check the status of Rx and Tx descriptors.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The buffer split feature is mentioned in the mlx5 PMD
documentation, the limitation is description is added
as well.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tunnel Offload API provides hardware independent, unified model
to offload tunneled traffic. Key model elements are:
- apply matches to both outer and inner packet headers
during entire offload procedure;
- restore outer header of partially offloaded packet;
- model is implemented as a set of helper functions.
Implementation details:
* tunnel_offload PMD parameter must be set to 1 to enable the feature.
* application cannot use MARK and META flow actions with tunnel.
* offload JUMP action is restricted to steering tunnel rule only.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Mark "BSD nic_uio", "Usage doc", and "Perf doc" as supported
for the bnxt PMD.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add RSS configure, support to RSS hash and reta operations for PF.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add packet type marco definition and convert ptype to ptid.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add receive and transmit units start and stop for specified queue.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for txgbe PMD.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for flow items VXLAN, Geneve and NVGRE to
MAE-specific RTE flow implementation.
Having support for these items implies the ability to insert
so-called outer MAE rules and refer to them in MAE action rules.
The patch takes care of all necessary facilities to do that.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add support for this flow item to MAE-specific RTE flow implementation.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add support for this flow item to MAE-specific RTE flow implementation.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add support for this flow item to MAE-specific RTE flow implementation.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add support for this flow item to MAE-specific RTE flow implementation.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add support for this flow item to MAE-specific RTE flow implementation.
In a pattern, a L2 item preceding an item VLAN must have
correct "type" ("inner_type") set depending on the total
number of VLAN tags (double-tagging is supported):
"pattern eth type is X / vlan / end",
X = 0x8100, or 0x88a8, or 0x9100, or 0x9200, or 0x9300
"pattern eth type is X / vlan inner_type is 0x8100 / vlan / end"
X = 0x88a8, or 0x9100, or 0x9200, or 0x9300
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add support for this flow item to MAE-specific RTE flow implementation.
The DPDK port must not relate to a different physical device.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The action handler will use MAE action DELIVER with MPORT
of the PCIe function associated with a given DPDK port ID.
The DPDK port must not relate to a different physical device.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Effectively, the resulting action will be of type DELIVER, and
destination MPORT will be a properly constructed NULL value.
This will achieve the requested behaviour (no delivery).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The action handler will use MAE action DELIVER with MPORT of the PF/VF.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add support for these flow items to MAE-specific RTE flow implementation.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The action handler will use MAE action MARK.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The action handler will use MAE action FLAG.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
A group of actions (OF_PUSH_VLAN, OF_VLAN_SET_VID and
OF_VLAN_SET_PCP) maps to MAE action VLAN_PUSH.
This action group is supported only for rules which have transfer
attribute, and can be requested once or twice per a rule.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
This action is supported only for rules which have transfer attribute,
and can be requested once or twice per a rule.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
