numam-dpdk/drivers/net/qede/base
Sony Chacko 40e9f6fc15 net/qede: enable VF-VF traffic with unmatched dest address
This patch enables VF to VF traffic with unmatched destination addresses.
The steps to enable this are:
- Enable promiscuous mode filter settings.
- Check for VF mode and enable promiscuous mode settings for VF.
- Check filter configuration to ensure conflicting filter modes
are not set.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
2016-06-23 17:47:18 +02:00
..
bcm_osal.c net/qede: allow firmware to query LAN stats 2016-06-15 17:13:55 +02:00
bcm_osal.h net/qede: allow firmware to query LAN stats 2016-06-15 17:13:55 +02:00
common_hsi.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_attn_values.h qede: add interrupt handling support 2016-05-06 15:51:22 +02:00
ecore_chain.h qede: add L2 support 2016-05-06 15:51:22 +02:00
ecore_cxt_api.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_cxt.c qede: fix 32-bit build with debug enabled 2016-05-24 16:16:25 +02:00
ecore_cxt.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_dcbx_api.h qede: add DCBX support 2016-05-06 15:51:22 +02:00
ecore_dcbx.c qede: add DCBX support 2016-05-06 15:51:22 +02:00
ecore_dcbx.h qede: add DCBX support 2016-05-06 15:51:22 +02:00
ecore_dev_api.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_dev.c qede: add DCBX support 2016-05-06 15:51:22 +02:00
ecore_gtt_reg_addr.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_gtt_values.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_hsi_common.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_hsi_eth.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_hsi_tools.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_hw_defs.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_hw.c qede: add SRIOV support 2016-05-06 15:51:22 +02:00
ecore_hw.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_init_fw_funcs.c qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_init_fw_funcs.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_init_ops.c qede: add SRIOV support 2016-05-06 15:51:22 +02:00
ecore_init_ops.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_int_api.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_int.c qede: add interrupt handling support 2016-05-06 15:51:22 +02:00
ecore_int.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_iov_api.h qede: add SRIOV support 2016-05-06 15:51:22 +02:00
ecore_iro_values.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_iro.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_l2_api.h qede: add L2 support 2016-05-06 15:51:22 +02:00
ecore_l2.c net/qede: enable VF-VF traffic with unmatched dest address 2016-06-23 17:47:18 +02:00
ecore_l2.h qede: add SRIOV support 2016-05-06 15:51:22 +02:00
ecore_mcp_api.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_mcp.c qede: fix 32-bit build with debug enabled 2016-05-24 16:16:25 +02:00
ecore_mcp.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_proto_if.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_rt_defs.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_sp_api.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_sp_commands.c qede: add DCBX support 2016-05-06 15:51:22 +02:00
ecore_sp_commands.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_spq.c qede: add SRIOV support 2016-05-06 15:51:22 +02:00
ecore_spq.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_sriov.c qede: fix 32-bit build with debug enabled 2016-05-24 16:16:25 +02:00
ecore_sriov.h qede: add SRIOV support 2016-05-06 15:51:22 +02:00
ecore_status.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_utils.h qede: add base driver 2016-05-06 15:51:22 +02:00
ecore_vf_api.h qede: add SRIOV support 2016-05-06 15:51:22 +02:00
ecore_vf.c qede: fix 32-bit build with debug enabled 2016-05-24 16:16:25 +02:00
ecore_vf.h qede: add SRIOV support 2016-05-06 15:51:22 +02:00
ecore_vfpf_if.h qede: add SRIOV support 2016-05-06 15:51:22 +02:00
ecore.h qede: add DCBX support 2016-05-06 15:51:22 +02:00
eth_common.h qede: add base driver 2016-05-06 15:51:22 +02:00
mcp_public.h qede: add DCBX support 2016-05-06 15:51:22 +02:00
nvm_cfg.h qede: add DCBX support 2016-05-06 15:51:22 +02:00
reg_addr.h qede: add base driver 2016-05-06 15:51:22 +02:00