This is resolving the address and route to the target, not
binding a socket to an address.
Change-Id: I80055481ed2e020410a1e186a4e7371b60faaee9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
They were very close to the same already, so finish the job.
Change-Id: Ifba9e3b2d11a3e70cbfbe46f57a67552db2757ed
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We should be sending the bounce buffer's remote key to the target so it
can put it into an RDMA SGE on the remote side.
Change-Id: Icded155ad2292c67baa722f001c9c07178bc2754
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is no particular reason for this to be 127; make it 128 to at
least be consistent with the PCIe transport.
Change-Id: I60500e0044d3549ba6350e1f35f09d624848bd21
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function was only called from one place and saved no
lines of code.
Change-Id: If5e653732df57c1f2c93e20cf4f286eac31df91c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This matches the behavior of nvme_pcie, which queues a request if no
tracker is available.
Change-Id: Idbf6c951c89451cfea22ec6bc553ff46f988f818
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the caller pre-allocate an rdma_req and change req_init() so it
only does initialization, not allocation.
This is necessary to distinguish between rdma_req allocation failure and
other types of failures, which will become important in future patches
when requests will be queued if rdma_req allocation fails.
Change-Id: Ie6edebc1b5f05001b42fc959a29ce0ea6875e41e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Simplify the control flow and match the name of the function to its
purpose.
Change-Id: I65bad7e3b2ef710ca29eff9799b8dcaae3999315
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the qpair construct functions private to the transports - it
doesn't need to be called from generic code.
Change-Id: I5f730a4bcf60ce231fe27bc8f4c3c39cb647dd2d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a transport callback to return the maximum queue size, and enforce
it in the generic nvme_ctrlr layer.
This allows the user to tell what io_queue_size was actually selected by
the transport via the ctrlr_opts returned during attach_cb.
Change-Id: I8a51332cc01c6655e2a3a171bb92877fe48ea267
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Equivalent to commit 6ab28a201b except now
for commands instead of responses.
Change-Id: Ibe4382dc0f65c1b90c2cee2ad285bbdd21b96a89
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The only field of bb_sgl that was actually used is lkey, and that is
already stored in bb_mr.
Change-Id: I790369a06ce223f88e356df20a9d9a74a93ff225
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Refactor the discover log page processing into a loop that calls a
function for each log page entry. This sets us up to add support for
multiple Get Log Page calls to handle larger discovery service lists.
Change-Id: I85676ada375d0dadda2a3f4ab6331123ac7aaf60
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This isn't used yet in the NVMe library, but it will be necessary later
for supporting non-IPv4 addresses.
Change-Id: I167ce63ad25b0e0c9aa192b12d764c8d078e67f9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This better describes what the field controls (it does not affect the
admin queue size).
Change-Id: I851ae46fb4ed0fce819af07ae235824e0fc817e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For requests split in _nvme_ns_cmd_split_request() the payload offset is
set after children are created using recurrent call _nvme_ns_cmd_rw().
This makes impossible to reset SGL to proper offset in
incomming patches that split non-PRP complaint SGL requests.
To change this the payload offset is set after each request is allocated
in _nvme_ns_cmd_rw() not in _nvme_ns_cmd_split_request().
Change-Id: I9d3b2e3bbd9d93a4c8a37e1db8c4e01276e2cacb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This is preparation for handling non-PRP compliant SGL.
Change-Id: I445790f9802292971256cf821d9730814c95a073
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This is preparation for handling non-PRP compliant SGL.
Change-Id: I49c3745498411c5ff9e17cd08f181d4d434c2d08
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Don't leave garbage from previous discover entries in the trid we are
returning to the user.
Change-Id: I60ae5932db4a95cedb8df1ff98a2479220b55ce4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The other simplifications to probe_info and trid made the
trtype argument redundant.
Change-Id: Ie7bea4e2204e690dc4909eeacd065e0722b53272
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The probe_info was reduced to just containing a
transport_id, so remove probe_info entirely.
Change-Id: Ica9a22d126cd14e282decd3eea1a0afe0460f099
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This can be obtained by parsing traddr into a pci_addr,
then getting a handle to the pci_dev and asking for all
of the pci information.
Change-Id: I1948cbd3ec65611293192ef5558ace19dd444d4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This bug was preventing multiple calls to spdk_nvme_probe() from
working, since the first call would return 0 from all of the DPDK driver
init callbacks and prevent other devices from ever being enumerated in
subsequent calls.
Reported-by: Tsuyoshi Uchida <tuchida@us.fujitsu.com>
Change-Id: I871aa170bbd03be111604eeabe3a7a7a4f40ce89
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the standard quirk mechanism to specify which devices
need software assisted striping.
Change-Id: Id8156876a90b4caf9d687637e14c7ad4a66ceda6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This way, all new controllers discovered will be initialized
in parallel.
Change-Id: Iebedb3905eb2787a3708f74425afae40ca31253d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
If the first call to spdk_nvme_probe probes a device and
the driver elects not to take it, still call the probe
callback for that device on subsequence calls to
spdk_nvme_probe.
Change-Id: If06467cf6796c827a0bbfba6e36d5b91534526fc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Move this down a level so it happens on all paths.
Change-Id: Iea9913f0e102353882466c8dea4ee39abb857520
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Scanning the transport may result in both new
devices and removed devices, so pass the callback
for both operations.
Change-Id: I6f73dbe6fd7cf61575c354b43f8ae3e2a01e2965
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Simplify the arguments to nvme_transport_ctrlr_scan to take
a transport id that identifies the discovery service (or
NULL to scan PCIe).
Further, separate scan into two functions - scan and attach.
Scan is for scanning an entire bus, attach is for a specific
device.
Change-Id: I464f351a02a04bc5a45096dcf5dc8fc5ac489041
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Instead of repeating the fields, just embed a transport_id.
Change-Id: I282704c9d59784abd5f7c93be4e47c673fcf6dde
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a small step toward making discovery more like
scanning a local PCI bus.
Change-Id: Ie7149ad060f2eeb56939b1241187bdf09681f2aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Before adding readv/writev support in nvme_rdma,
using this patch.
Change-Id: I25ff0df61d0346f22560d011158d7f80e72007ea
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
NUMDU was added with NVMe 1.2.1 and allows a larger log page size to be
described.
Change-Id: I1a4ac42393c1a21175b3564980d56b6e7a6ae80d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe over Fabrics transports should already be setting this in the
initial admin queue Connect command, so setting it again is not useful.
The kernel NVMe over Fabrics target additionally has a bug in the Set
Features - Keep Alive Timeout handler (it is extracting the KATO value
from the wrong offset in the command), so this works around the kernel
bug by not sending the Set Features command at all.
Change-Id: I0d7f09b71fcea116acf8810c5880157bb9315a04
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The reason is that kernel nvmf target will check the
value. If not set, it will fail the other commands later.
Even for discovery ctrlr, kernel nvmf target will
check the cc value.
Change-Id: I998327f91ba96281d261952878eb84d648a823da
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
It's not the whole transport - it's just an enum for the
type of transport.
Change-Id: Ia435a21792f221ddf50ddf4f0923c6152622eccb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change it according to the spec thus we can test
kernel nvmf target
Change-Id: Ica98dd40503a40c0f0de8efaefb1f6f67a89cde8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change the PCI enumeration API to individual functions per device type
so that only the drivers that are actually in use get linked into the
final executable. All of the common code is still shared internally in
the env_dpdk library.
Change-Id: I2ba83afe59202a510f999a0674e23e60b6581221
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The user's remove_cb should detach the NVMe controller when it can
ensure that it is no longer in use. In the interim (between remove_cb
and spdk_nvme_detach()), the controller will remain in a failed state,
so any new I/O submissions will return an error code but not crash.
examples/nvme/hotplug is not yet updated for this change, but that will
be done in a separate patch.
Change-Id: I8827ba36f9688ccb734e7871f20f11ec11e88f96
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
While we're here, fix up typos and add error logs for all error exits
in nvme_rdma_qpair_connect().
Change-Id: I236fe6571c2012ca047aa8a447638d9227454c2f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This version of multi-process support needs to have DPDK 16.11 builtin.
Change-Id: I3352944516f327800b4bd640347afc6127d82ed4
Signed-off-by: GangCao <gang.cao@intel.com>
The discover and probe 'nqn' fields are subsystem NQNs, so name them
subnqn to be consistent with the spec and the rest of the code and to
distinguish them from host NQNs.
Change-Id: I4a80fbc1f4b037c8a4f91c8f28d2a96e47c66c47
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Allow the host NQN to be overriden when connecting to NVMe over Fabrics
controllers.
Change-Id: I8fcf2e89ae7d9722677e834f76a8fe805c52f91b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes the function and file/line info actually useful (instead of
pointing to the helper function itself).
Change-Id: I22bac68827115880a49d456706a7eaecdc12e9b5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each transport should handle its own qpair cleanup internally.
Change-Id: I7dd737be820ea6bad686f4aad7d74044fad58a47
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Let the transport access the controller options during
ctrlr_construct().
Change-Id: I83590c111e75c843685dd9315f0f08416168356d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_rdma_req_get() is an internal function, and its only caller already
checks for a valid rqpair, so the NULL check is unnecessary.
Also clean up the redundant STAILQ_EMPTY/STAILQ_FIRST logic and use
STAILQ_REMOVE_HEAD.
Change-Id: Ic3828e8b5e881879173cb59350e39c5fac90e6ef
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_rdma_pre_copy_mem() does not have any failure cases, so remove its
return value and remove the never-taken branch in its only caller,
nvme_rdma_qpair_submit_request().
Change-Id: I91011734ed0c20f8db691d62172fe1a3021dd3a1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_rdma_req_put() is an internal nvme_rdma.c function, and all of the
callers already have the rqpair, so pass it directly. We also already
verify that all of the callers have a valid rqpair and req before
calling nvme_rdma_req_put(), so it doesn't need to check for NULL
pointers.
This also means that spdk_nvme_rdma_req doesn't need to hold a pointer
to its rqpair anymore.
Change-Id: I893a46a9074f0a843e379d10c123f9292eb3b1a4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The only place where outstanding_reqs was checked was in
nvme_rdma_req_put(), but the error case there could only happen if some
kind of internal programming error occurred (e.g. calling
nvme_rdma_req_put() on an invalid request).
Change-Id: I71e40ce562a8720dfaf70437ffd4c6493327c091
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_rdma_ibv_send_wr_init() was only called in one place, so just move
its contents into nvme_rdma_qpair_submit_request() since it allows
simplification of the code:
- req was always NULL, so remove the code that used req entirely.
- wr and sg_list are never NULL, so remove the checks for those.
Change-Id: I12a4f3502219d3681607686945e343f6808c0d2f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We currently don't handle discovery service referrals, so skip those, as
well as any other unknown subsystem type.
Change-Id: I64f889e9272fb57b5cf9bb5467b3abca3955baf5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
QEMU's virtual NVMe controller device does not support the AER Set
Feature, so ignore its failure and continue.
Change-Id: I8b5c217a3112edabb6f76ec3e5f4ef774981a1d7
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Catch SIGBUS and handle it by remapping new memory into the
location where the BAR previously was.
Change-Id: Ie8d00a60a0bbe7f7ec57a5c39c0a63c5d9443206
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
These functions will attach or detach from a PCI device. Attaching
typically means mapping the BAR.
Change-Id: Iaaf59010b8a0366d32ec80bb90c1c277ada7cfe7
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
spdk_nvme_probe frees ctrlr when nvme_ctrlr_process_init is failed. But
ctrlr has already been freed while calling nvme_ctrlr_destruct. So
spdk_nvme_probe doen't need to free ctrlr.
The generic NVMe library controller initialization process already
handles enabling the controller; the RDMA transport should not need to
set EN itself.
For now, the discovery controller is cheating and not using the normal
initialization process, so move the EN = 1 hack to the discovery
controller bringup until it is overhauled to use the full
nvme_ctrlr_process_init() path.
The previous code where CC.EN was set to 1 before going through the
controller init process would cause an EN = 1 to EN = 0 transition,
which triggers a controller level reset.
This change stops us from causing a reset during the controller
startup sequence, which is defined by the NVMe over Fabrics spec as
terminating the host/controller association (breaking the connection).
Our NVMe over Fabrics target does not yet implement this correctly, but
we should still do the right thing in preparation for a full reset
implementation.
This patch also reverts the NVMe over Fabrics target reset
handling hack that was added as part of the NVMe over Fabrics host
commit to its previous state of just printing an error message.
Change-Id: I0aedd73dfd2dd1168e7b13b79575cc387737d4f0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Most of the NOTICE level messages should have been TRACE.
Change-Id: Icbc4d398ab2580cf3a2349be11441b7a09603020
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Verify that qpair is not NULL before doing pointer math on it.
The NULL check after calling nvme_rdma_qpair(qpair) would not
trigger if qpair was NULL.
Fixes a crash if the Connect command failed, causing
nvme_rdma_ctrlr_create_qpair() to return NULL.
Change-Id: I158a5b1752892a7d5a72a9ac20c0c5b2cd781a81
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The status.done flag polled by nvme_ctrlr_set_keep_alive_timeout()
was never initialized.
Change-Id: I323fae5f4ce12209a9699965ce07894bc3c6205a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the NVMe over Fabrics spec definitions for TRTYPE rather than the
internal library transport type.
Change-Id: Idead559a8f8d95274fc580d10e82033822e6eda8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These need to be available for the lifetime of the probe_info structure,
so they can't be pointing at e.g. temporary buffers on the stack.
Change-Id: I5aaa898acf9314aab51600dd756f966965d37fd0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It always points to the same internal RDMA request complete function, so
just call that function directly.
Change-Id: Ic1fb6236bf43eaad62413df77d43be9ab855e5c7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We can't transfer more than the bounce buffer in a single command, so
report that rather than some bogus value.
Change-Id: I39b147916dcc2ee478470917298763a239a6a35a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Record the user-provided asynchronous event configuration set via Set
Features, and return it in Get Features.
This value is not actually used, since AER is not implemented yet in the
virtual controller model, but it at least implements the mandatory
Set/Get Features.
This allows the hack in the NVMe host code that ignored the Set Features
failure to be reverted.
Change-Id: I2ac639eb8b069ef8e87230a21fa77225f32aedde
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fill in the cached copy of CAP in the generic NVMe controller to match
the PCIe transport.
This is not really early enough, since CAP is used during the reset
process to determine the reset timeout, but that will have to be fixed
separately by rearranging some of the transport callbacks.
Change-Id: Ia8e20dbb8f21c2871afb9e00db56d0730e597331
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure the entire NQN field is zero-padded, rather than using
strlen() on the input.
Change-Id: Icee68bd033feed057813beeb30cec102ed90840e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This fixes a compiler warning about unhandled enum cases in a switch.
Change-Id: Icecb56b47a05c13f390f03b877f8eae243b481a6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
- add SPDK_NVME_OPC_KEEP_ALIVE to admin_opcode
- add SPDK_NVME_SC_INVALID_SGL_OFFSET, SPDK_NVME_SC_INVALID_SGL_OFFSET,
SPDK_NVME_SC_HOSTID_INCONSISTENT_FORMAT, SPDK_NVME_SC_KEEP_ALIVE_EXPIRED
and SPDK_NVME_SC_KEEP_ALIVE_INVALID to generic_status
The SPDK_TRACELOG macro depends on a CONFIG setting (DEBUG), so it
should not be part of the public API.
Create a new include/spdk_internal directory for headers that should
only be used within SPDK, not exported for public use.
Change-Id: I39b90ce57da3270e735ba32210c4b3a3468c460b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Considering the process can be terminated in the cases like ctrl+c,
kill command or memory fault, the ref is tracked in the per process
structure spdk_nvme_controller_process and whenever there is other
process attaches or detaches the controller, a scan will be issued
to cleanup those unexpectedly exited processes.
Change-Id: Ib4f974f567a865748d42da4ead49edd383dfc752
Signed-off-by: GangCao <gang.cao@intel.com>
Instead of the next_sge callback returning the physical address
directly, make it return the virtual address and convert to physical
address inside the NVMe library.
This is necessary for NVMe over Fabrics host support, since the RDMA
userspace API requires virtual addresses rather than physical addresses.
It is also more consistent with the normal non-SGL NVMe functions that
already take virtual addresses.
Change-Id: I79a7af64ead987535f6bf3057b2b22aef3171c5b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Function pointers will not work for the DPDK multi-process model (they
can have different addresses in different processes), so define a
transport enum and dispatch functions that switch on the transport type
instead.
Change-Id: Ic16866786eba5e523ce533e56e7a5c92672eb2a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The initialization of dev_addr was replaced with probe_info.pci_addr,
but its use in spdk_pci_addr_compare() wasn't replaced to match.
Fixes commit fcb00f3780 (nvme: expand
probe information to a struct).
Change-Id: Ic4c273d2aa0bf1f9e3e1527f3ab09d3c019158cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvme_probe() will now provide a struct spdk_nvme_probe_info to the
probe and attach callbacks in place of the PCI device pointer.
This struct contains the useful information that could be retrieved from
the PCI device during probe.
The goal of this change is to allow expansion of the probe information
in the future when other transports (specifically, NVMe over Fabrics)
are added that do not necessarily use PCI addressing or device IDs.
Change-Id: I59a2a9e874e248ce5fa1d7f4b57c8056962ff3cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the new public PCI ID structure in the NVMe library to replace the
previously private struct pci_id.
Change-Id: I267d343917f60bdae949a824bc0fe67457cbbc0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
- Split the part that gets a PCI device's address into its own function,
spdk_pci_device_get_addr(). This is useful outside of the comparison
function and is orthogonal to comparing addresses.
- Make the comparison function take two addresses instead of a device
and an address. The more general form will be useful with addresses
that are not directly associated with a device. Because of this, also
rename the function from spdk_pci_device_compare_addr() to
spdk_pci_addr_compare().
- Return a signed value similar to strcmp() so that addresses can be
ordered, not just compared for equality.
Change-Id: Idf304454af09ea57f1e1d5dc3a39b077378cecad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a field to struct spdk_nvme_ctrlr_opts that allows the user to
specify a keep alive timeout, and add automatic submission of Keep Alive
commands to spdk_nvme_ctrlr_process_admin_completions().
Change-Id: Ib282299a571d8edc59c7933418751bc3a6c98b40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the quirks mechanism generic in preparation for quirks for devices
from other vendors.
Change-Id: Ic003b020a38f1b966021db30e3f2bce9cf6a1a0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a transport function to get the max data transfer size to break the
dependency on NVME_MAX_XFER_SIZE.
Change-Id: I846d12878bdd8b80903ca1b1b49b3bb8e2be98bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the PCIe-specific admin queue setup to nvme_pcie_ctrlr_enable.
Change-Id: Ic3f5625fa804f719040ba86b7fc3bf82fcc057c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The value of CAP should not change during the lifetime of a controller,
so read it once during ctrlr_construct and store it in the ctrlr.
Change-Id: I089d4141b4e0c9aae6c53abf9bb0ef6577dabe0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than embedding adminq directly in the spdk_nvme_ctrlr structure,
change it to a pointer to a spdk_nvme_qpair. This is necessary to allow
the transport to extend the qpair structure.
Change-Id: I041685d5037088cf56d046fe99bf204edcfc57b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This requires a couple of related changes:
- I/O queue IDs are now allocated by using a bit array of free queue IDs
instead of keeping an array of pre-initialized qpair structures.
- The "create I/O qpair" function has been split into two: one to create
the queue pair at startup, and one to reinitialize an existing qpair
structure after a reset.
Change-Id: I4ff3bf79b40130044428516f233b07c839d1b548
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the transport ctrlr_construct callback responsible for allocating
its own controller.
Change-Id: I5102ee233df23e27349410ed063cde8bfdce4c67
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These are specific to local NVMe PCIe devices, so move them out of the
generic NVMe code into the PCIe transport.
Change-Id: Iea2056a4c438b7d3a303b4b5e977ce7aa9e58c05
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will allow factoring out PCIe-specific code into a swappable
transport so that NVMe over Fabrics host support can be added.
Change-Id: I4df74dd268d655e3b36e8d6114ebe7d79a24844d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For the nvme readv/writev APIs, the PRP checking logic was
incorrectly failing single SGE payloads that were larger
than 4KB. This patch adds a test case for this scenario,
and fixes the PRP checking logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6357d620599666046d2cb74d7923dac1f75418c5
Enforce exactly one trailing \n, and fix all of the existing cases.
Change-Id: I6218e4700e90aeb647eaee78089530c79993c8c8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows users to swap their PCI library from
libpciaccess/dpdk to another mechanism using the standard
method for swapping out the env library.
Change-Id: Ib2248f8b43754a540de2ec01897e571f0302b667
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows users to swap out SPDK's third party
libraries for an implementation based on their own
framework.
Change-Id: Ia0b7384ce5e31acba5ad0d7002dec9e95b759c52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The new env library will wrap all third-party library
calls and be easily swappable with alternate implementations
at build time. For now, it's just the memory library
renamed.
Change-Id: I26a70933289f8137107208ba75f7520fd7a33da0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch also drops support for automatically unbinding
devices from the kernel - run scripts/setup.sh first.
Our generic pci interface is now hidden behind include/spdk/pci.h
and implemented in lib/util/pci.c. We no longer wrap the calls
in nvme_impl.h or ioat_impl.h. The implementation now only uses
DPDK and the libpciaccess dependency has been removed. If using
a version of DPDK earlier than 16.07, enumerating devices
by class code isn't available and only Intel SSDs will be
discovered. DPDK 16.07 adds enumeration by class code and all
NVMe devices will be correctly discovered.
Change-Id: I0e8bac36b5ca57df604a2b310c47342c67dc9f3c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Provide a convenience wrapper for general purpose dataset
management commands. The previous wrapper for deallocate
was difficult to use correctly and only for deallocate.
Note that the name is "dataset_management" as opposed to
"data_set_management" to match the NVMe specification.
It's questionable whether "dataset" is valid English, but
it is best to match the specification.
Change-Id: Ifc03d66dbabeabe8146968cf8a09f7ac3446ad68
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Namespaces can be allocated but inactive, which causes
the identify namespace command to fail. Handle this
case so that attaching to the controller does not fail.
Change-Id: I9d692f8e7841a9315a737b0a5e44d9b4e4484a13
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Rather than forcing the NVMe library user to pass a specially-allocated
block of memory (e.g. rte_malloc() in the case of the default
nvme_impl.h), just make the NVMe library allocate a suitable buffer
itself and copy to/from the user buffer as needed.
The fast path I/O functions still require special rte_malloc()
allocations, since we don't want to add an allocation and copy to the
I/O critical path.
Change-Id: I7fe88c0ba60c859a33bbe95b7713f423c6bf1ea8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Intel DC P3*** NVMe devices specify a desired stripe size, which was
used for splitting I/O. Not all devices, however, specify a desired
stripe size (such as the Intel DC D3*** line), and for only these
devices there was a logic mistake that overwrote the maximum I/O
size with a 2MB default. This patch corrects that error.
Change-Id: I94b72a3a3dd1dfa18bd638daf7e01a592eb6ed17
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
DPDK 16.07 introduced a new PCI ID field for matching by class code
instead of vendor/device ID. Use it to match all NVMe devices instead of
explicitly listing vendor and device ID pairs.
Change-Id: Ib2a5cc6833bf2b793d37d77caab97207f365df8f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
assert is part of the C standard library and is available
on any platform we'd consider porting to. Don't put a
wrapper around it.
Change-Id: I0acfdd6a8a269d6c37df38fb7ddf4f1227630223
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
pthreads are widely supported and are available on any
platform we currently foresee porting to. Use that API
instead of attempting to abstract it away to simplify
the code.
Change-Id: I822f9c10910020719e94cce6fca4e1600a2d9f2a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Since we bind the NVMe device to UIO driver to protect against native
NVMe driver, but for Admin queue, there are still INTx interrupts
exist, as all the completion for Admin queue will be processed in
user space, so we don't need INTx anymore.
Change-Id: Ife5b3e410ae95690ed0f3f9a2f2dfaf55a7797b5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
rte_zmalloc() is broken and does not actually return zeroed memory on at
least DPDK 16.07 on FreeBSD, so do it ourselves.
Change-Id: If8da93ead0b3911c8bca24aa27ed90dc00b8a9a4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a step towards enabling sharing SPDK NVMe
device access from multiple processes using DPDK's
multi-process framework.
Change-Id: I57d5eec158b42addc1036bd2583596471a467a95
Signed-off-by: GangCao <gang.cao@intel.com>
Drop the special-case preprocessor definition for PCI access library now
that config.h is available with an equivalent SPDK_CONFIG_PCIACCESS
define.
Change-Id: I4891d0f2fd7d3eea51b767df9e594555b36265ea
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Explicitly include spdk.common.mk at the top of all lib Makefiles so
that CONFIG options and other predefined variables are set.
Change-Id: I1e560c294fe8242602e45191a280f4295533ae44
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For a single poll of the completion queue, if the user
submits I/O from within their completion callback and their
completion callback is particularly slow to execute, the loop
could potentially continue forever. To support this, we
need to limit the number of completions we'll process
in one batch.
Change-Id: If6bae47e52b36347dbe5622ace68c866ee88a0b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is intended to be used for examples/nvme/identify and similar
diagnostic utilities.
Change-Id: Ib2f941e9af7a3fb7555865ef253742e30ccad2b5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we used cap_lo and cap_hi to represent the 32-bit halves of
the full CAP register. However, it is simpler to keep them in a single
64-bit structure, and is no less efficient on 64-bit platforms.
Also name the NSSRS field from NVMe 1.2, which was previously reserved.
Change-Id: I1d5d9b0dccbb12373b4aed3db29c883881d43223
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will allow removal notifications to be propagated to the library
user (e.g. for hotplug).
The callback is currently unused, but this at least prepares the API for
the future hotplug support.
Based on a patch by Dave Jiang <dave.jiang@intel.com>
Change-Id: I20b1c2dbf5e084e0b45a7e51205aba4514ee9a95
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the knowledge that both the source and destination of
nvme_copy_command() are aligned to emit the aligned variants of the
SSE2/AVX mov instructions.
Change-Id: I0a7e32a3bb10b9a1920cd85691b79fa7172eecb3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This moves some definitions from nvmf_spec.h to
nvme_spec.h based on the latest publication.
Change-Id: I51b0abd16f7d034696239894aea5089f8ac70c40
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Swap the order of checks in the failure check - if rc is not 0, addr may
be garbage.
Change-Id: I110710efd00397c777d59ac8b219ba3cc2156596
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
