There were some functions in the internal header that can be entirely
private to the init library. Move them over.
Also, remove the support for including the header from a C++ file
because these headers are internal to SPDK which is pure C.
Change-Id: Ic4323b2b8664e70106a57b3ca8acbc7c2efe621d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6642
Reviewed-by: Tom Nabarro <tom.nabarro@outlook.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The header size is very small, which does not have too much value to
offload such calculation by hardware.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iaa82f39312df7eef3282325a33677ea41ab735ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The P5800X drive will report the following error when getting Error Recovery
feature, according to the specification we should pass valid nsid.
nvme_qpair.c: 238:nvme_admin_qpair_print_command: *NOTICE*: GET FEATURES ERROR_RECOVERY cid:23 cdw10:00000005 PRP1 0x0 PRP2 0x0
nvme_qpair.c: 452:spdk_nvme_print_completion: *NOTICE*: INVALID NAMESPACE OR FORMAT (00/0b) qid:0 cid:23 cdw0:0 sqhd:000f p:1 m:0 dnr:1
get_feature(0x05) failed
Fix issue #1955
Change-Id: I30ce60cddcddbf78e57a8c172a2056a82ac72802
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8009
Reviewed-by: Chengqiang Meng <chengqiangx.meng@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This will help us to add get namespace features later.
Change-Id: I7e809cd9e3bcb3874ce141183b9c4ee82543616c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8008
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
open_blobids holds bit array of currently open blobs,
this is a way for quicker determination than iterating
over all blobs. See patch introducing it:
(30ee8137)blob: Add a bitmask for quickly checking which blobs are open
That patch added resizes of this bit array to bs init
and bs recovery path (not shut down cleanly).
But that patch skipped over bs load from a clean shutdown.
This resulted in blob open having multiple blob pointers that
target the same blob id.
Fixes#1937
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3c42a63d168d1f5b013b449f010c5b207936045b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Mellanox Build Bot
Before this patch idle_tsc was sum of all idle tsc of all
threads running on a reactor.
There are cases when no threads are present on the reactor,
and _reactor_run() spins doing nothing.
To give more accurate representation of the reactors state,
the idle_tsc now adds time spent doing idle spinning.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If797b2a03507d17b07367d56d5f6c40cefbbbd49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7900
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Disabling interrupt mode on reactor now updates the tsc_last
to current time. So any further tsc caulations will not account
for the time when reactor was in interrupt mode.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I56fb8a738eea60ee5de3b49d586f7cb228b54510
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7901
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
tsc_last value is used to update thread stats
during _reactor_run(). See:
spdk_thread_poll(thread, 0, reactor->tsc_last);
If no threads were present on the reactor,
this value got outdated and resulted in
adding time reactor spent with no threads to
stats of the first thread placed on that reactor.
This patch fixes thread stats by making sure
that argument to spdk_thread_poll() is up to date.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0c35fdba1b63b6ee19a5a2b34751090839cb2438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7845
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch does not change the UT in functional way.
Added accounting of last_tsc and spdk_get_ticks() similar
to the real application.
First the reactor_run() [not _reactor_run()] starts
reactor->tsc_last to current time. UT now set it at the start
and never touch it again directly.
Second the spdk_get_ticks() is updated to the elapsed time
to simulate flow of time, and make sure that its further
usage is up to date to the current time.
Fixed typo in test case description for test_reactor_stats.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iaa2eb00fa3bffc2f21f1692da0259f1d023086b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7904
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This is useful for applications even if they elect not to use the SPDK
event framework.
This doesn't shift everything in one go - just the subsystem
initialization logic. Configuration file loading also needs to move
in a separate patch later.
Change-Id: Id419df1045442d416650ed90e5ee78adfdd623d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6641
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Upon running abidiff to get the list of impacted interfaces it seems
to exit with != 0 status. This triggers errexit causing the script
to exit in the middle of processing the lib files so we don't get
the full picture of all potentially impacted files. Ignore the
exit status in this case and allow the loop to go through all the
.sos.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7edc5122161b0927fdd9a918571419f32fd46dac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In case the addr argument was not an existing unix socket file the rpc
client would consider it to be an actual ip address. As a result
connect() would be called with improper set of arguments. This could
cause the rpc.py to block for undesired amount of time until connect()
finally decided to return (seen on some fedora33 builds).
This was affecting sh wrapper functions like waitforlisten() which
use rpc.py to determine if given app is ready to be talk to blocking
execution of the tests for way too long then intendent.
To avoid such a scenario determine the format of the address and use
routines proper for given address family.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iaac701d72c772629fa7c6478ff4781b0c5d485d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7777
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
There's already a new LTS release in place, hence these workarounds
are not needed anymore.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Idf597a5cf8da18d75f2630d59a277d4545fadc0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7987
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In latest 13.0 release of freebsd sed is not accepting \s anymore,
hence it needs to be replaced. Note that only parts of the repo
which are touched by freebsd during the tests are updated.
Details https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=253893
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I217208511af8f98e7033f8f24a343b5ca9c48825
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7986
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This package is not available under latest 13.0 release, however,
the /etc/os-release we are looking for is already installed there.
For older versions, and in case this package is missing, we still
can determine that we are running under freebsd as part of the
fallback check to uname().
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I6a04eb66392d91899a4b55d4eb508bef140e924a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7985
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Get all of the hot stuff to the first cache line.
* Shrink the xfer enum to one byte (it only has 3 values).
* Pull out the dif enabled flag form the dif structure so it
can be access separately
* Rearrange the members
Change-Id: Id4a2fe90a49c055a4672642faac0028671ebfae9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7827
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Checked the definition of strncmp. If substring s1
is found in strnmp(s1, s2, len), then it will return 0.
For the len value, it is better to use strcmp. Otherwise,
if s1=cluster1, s2=cluster & len=strlen(s2),
strncmp will return 0. But they are two different strings. For
cluster names, they are different.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I15a06184d834cd1567b329d0322cd6bdea6fee4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
(cd83ea4a)thread: Add SPDK internal APIs spdk_thread_get_first/next_active/timed/paused_poller()
Patch above by mistake iterates over active_pollers list
for function that lists paused pollers.
Fixes#1947
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1b69d942675f34f5f046ec46feacc8d81d89f015
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7952
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
When blob persist starts, there can already be multiple
of such requests pending. It is possible to complete
a set of persists at once, if blob state after their
execution would be the same. This is the case when
persists are already pending when a particular persist
request is started.
This patch implements such mechanism by introducing
persists_to_complete queue, containing entries that
were previously queued up before starting the current
persist request. If there are any entries in this queue,
further requests are put into pending_persists.
When first request from persists_to_complete is persisted,
completions are issued for all requests on that queue at once.
If at that point there are any new entries on pending_persists,
all of them are put into persists_to_complete. Persist process is started
again with the first request from that queue.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I10063e55d6f821b1863de016d3148da6a719a422
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Together with options to disable examples, tests and unit-tests
this will enable us to build SPDK without linking any executables.
This is useful for packaging SPDK in applications - especially
those using own ENV.
Fixes#1877
Signed-off-by: Rajarshi Chowdhury <rajarshi.chowdhury@oracle.com>
Change-Id: I0467ec497d2abe2fad40cdb4ba723a240bee46d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7462
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The openstack tests require to have one interface available under
specific ip, 10.0.2.15. This ip is a first lease VM receives from
the user network which is preconfigured in libvirt environment.
Use this instead of defining completely separate network which
by the very default will serve its own DHCP service as well. This
may result in a cosmetic issues (e.g. two ips, static one and
dynamic one on the interface) of having inconsistent config on the
VM depending on how the net device is configured by the underlying
distribution.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie3da26eebcfb0de668166c4a0120c65aec104540
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
This is done as part of the work to fix currently existing CI job
using this particular test suite.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id5e9e8a814fb3025f192871650b8aa317f2de910
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Moves "mvwhline(core_win, 6, 1, ACS_HLINE, CORE_WIN_WIDTH - 2);"
upwards to increase readability by placing this call in order
(to print the line in 6th row after data in 5th row is done printing)
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Icec340231090aeb57c600f52b3c687dbc78cc4b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7959
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Changes where store_last_run_function() is called. Before this patch
this function was used inside refresh_pollers_tab() and it overwrote
last run counters of each poller before show_poller() function had a
chance to use them. As a result poller details window was always
showing zeroes instead of actual difference in run count between each
application loop.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I96219698f7f0b51b94ffe8c0d6bf40f73cbf8a82
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7951
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Moves store_last_run_counter() function to allow next patch to
call it earlier in the code, inside get_data() function.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I1e37080ec86309bbf33442fa12cbe9dc575cc864
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7950
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Deletes g_pollers_history and store_pollers_last_stats() function
to simplify spdk_top code.
Adds last_run_counter to show_poller() function to get last state
of poller's run counter for comparision with current value and
display in pop-up window.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I236fbcac31e67a617d37ba15888aeb30e3763e01
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Deletes g_thread_history and g_thread_info to use g_threads_stats
across the whole application to simplify spdk_top code.
Now instead of separate struct, fields last_busy and last_idle are
being used.
get_data() function now uses local structure to get RPC data instead
of filling global one. This has been changed so that g_threads_stats
keeps its last_busy and last_idle fields unchanged.
free_rpc_threads_stats has been moved down so that in future patches,
when multithreading is implemented, there is no need to lock
g_threads_stats during RPC call.
Changes places of allocation/deallocation of g_threads_stats, since
we want to save last_idle and last_busy fields instead of zeroing them
out each application loop.
Changes show_thread() function to use local copy of threads array
instead of pointers to global struct. This is for the convenience
in the future patches implementing multithreading to avoid the need
to lock the global struct for details display.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I0dc87eac4c1b89fa16f14f5387d94ee176dfdf43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7587
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Move part of code with get_data(), refresh_tab() and free_data()
inside show_stats() upwards to make sure data structures are
up to date for pop-up details windows.
Delete get_data(), free_data() calls from show_thread(), show_poller()
and show_core functions.
Add data freeing right before rpc calls inside get_data() to let
pop-up details windows to use updated data before freeing it.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I0d78eb7a48b0cdff4284815afc1a214b0effd7fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7953
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This function is going to be needed in get_data() in the next patch.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I9368b4567a92ca20d830c3475e3120ee691b84c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7947
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Was using reserved field in CRC to store the final address of where
to put the result, this not legal. Move to the completion record
and slightly re-arrange the struct to keep it at 96 bytes.
Refacorted the IO prep function so the caller can udpate both the
descriptor and completion records instead of continuing to add
parameters to the prep function for opcodes that need something
unique in the completion record. This also allowed for a minor
fix where the prep function was returning NULL when vtophys failed
which would have indicated busy as opposed to failire. Now we can
proprely fail that path.
fixes#1929
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic23bc7b68bdd5757c30b7963880677f423368e20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If6ce4d3f7bc58855ba61b352be71dff404c87720
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6819
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Patches stopped applying cleanly because of dpdk/dpdk changes:
7d5cfaa7508de0fd248b05effbf421a98317006a
4ad4b20a79052d9c8062b64eaf0170c16a333ff8
Needed to rebase custom patches.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1006f7f6ba21a3cee5b607cfc44adedb4c1d5830
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7903
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvmf_subsystem_add_listener() in rpc/nvmf was modified
by 64debe0453 and the
change was not reflected in performance scripts.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I7bb8c39ab225421964e37883aa7b0f824e8df683
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
SYS_LIBS var is used to generate Lib.private section of
spdk_syslibs.pc
lack of pthread can result in linking issue when spdk's *.pc are used
please note that usage of -lpthread and -pthread is not consisent
within system wide pc files
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2dd327371d5621ea12f1e2f7abdfe6b7aa6602eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szulik <maciej.szulik@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This script counts how many times each syscall
is called by the SPDK application.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife5efccee73e407e1d819293786f2acdfa317f78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This script captures a histogram of the returned values
from the readv syscall. It can be useful for analyzing
the efficiency of our sock/posix implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I910eb2e81e3416855cda7a3854982cd02476850e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This script tracks spdk_thread_send_msg and
spdk_for_each_channel calls. It also uses usym
to get the name of the function pointer passed to
these calls.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia0cf5b50538bd26a3e15e35cbab765fe3c327c73
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7711
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This script simplifies execution of bpftrace scripts
for SPDK application analysis. The script should be
invoked as:
scripts/bpftrace.sh `pidof spdk_tgt` script.bt
where 'script.bt' is the name of the bpftrace script
you wish to execute.
The script helps simplify the following:
1) replace __EXE__ markers in the bpftrace script with
the full path of the spdk executable (required for
usdt probes); it uses /proc/<pid>/exe to get the
full path
2) replace __PID__ markers in the bpftrace script with
the PID of the spdk process under analysis - this
allows for doing things like filtering system call
counts for just the SPDK process
3) invoke bpftrace with the -p <pid> option
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib271f26efe4ba326d951a7b30f61b22be755dda7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7710
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For now, we will keep this disabled by default,
enable with --with-usdt option to the configure
script. Long-term we will want to enable this by
default, and only disable via configure.
Modules can include spdk_internal/usdt.h and add
probes such as:
SPDK_DTRACE_PROBE2(probe_name, ptr, val);
When USDT is enabled, these will translate to
DTRACE_PROBE2(spdk, probe_name, ptr, val). When
USDT is disabled, these will translate to nothing.
Later patches will add some probe points to the
nvmf target, some bpftrace scripts, and instructions
for how to successfully capture data with these
probe points and scripts.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id168e2c800fa5522815a175026386319014cfdaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7173
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev_nvme_compare_ns() will be used to check if all namespaces of
one nvme_bdev are identical, and this is the convenient location.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3fa6072c1cceec53268e53bf398fa1e8f069035e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7169
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will be helpful to simplify the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I66939f2953c66582bfcb79cfe187814280e89680
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When multipath is supported, a subsystem has multiple controllers and
bdev_nvme_create_cb() will create a channel per nvme_bdev_ctrlr by
iterating the list of nvme_bdev_ctrlrs, and will hold lock while
doing it.
If the code to access nvme_bdev_ctrlr is put in a place, the
following patches will be easier and smaller.
Hence reorder the code of bdev_nvme_create_cb() as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2f2e66758c3374c678cc44bbb0116f4611c6753a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7754
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Factor out spdk_bdev_io_complete() calls into a helper function
bdev_nvme_io_complete().
This simplifies the code a little and will be helpful for the following
patches to retry I/Os. These are not performance critical but we
specify inline explicitly by following bdev_nvme_io_complete_nvme_status().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9fafacfd8571c037c3bc34382c251317309da334
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7497
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Factor out spdk_bdev_io_complete_nvme_status() calls into a helper
function bdev_nvme_io_complete_nvme_status().
This simplifies the code a little and will be helpful for the following
patches to retry I/Os. Specify inline explicitly to avoid performance
regression.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1ac451486e1c6a4401842490411e986fac191d59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7484
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_nvme_submit_request() calls spdk_bdev_io_complete() with failed
if bdev_nvme_reset() returns negated rc other than -ENOMEM.
So let bdev_nvme_submit_request() process it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2569634ff0f18fb433cb685de1366e43abf5a9fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7524
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
