This change implements mechanism to allow user to
define multiple tpoint masks separeted with a comma
(e.g. 0x400, 0x8).
This is going to be used in the next patch to implement
enabling of individual tracepoints inside a tracepoint group.
Change-Id: I963f89684aa62b6e1dde57e22ddf835aa2c89f05
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10536
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
it is possible that some specific transport doesn't support
NVMF_MAX_ASYNC_EVENTS (although it is a recommended value by spec)
with that change it is possible to reduce aerl on transport specific
layer so it can be advertised correctly during identify controller
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ife6465b5324fb39f9b343c6f42b860e9dd1164b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10422
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Not every transport requires accept poller - transport specific
layer can have its own policy and way of handling new connection.
APIs to notify generic layer are already in place
- spdk_nvmf_poll_group_add
- spdk_nvmf_tgt_new_qpair
Having accept poller removed should simplify interrupt mode impl
in transport specific layer.
Fixes issue #1876
Change-Id: Ia6cac0c2da67a298e88956734c50fb6e6b7521f1
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7268
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On aarch64 platforms, doorbells update from guest VM may not be seen
on SPDK target side. This is because there is memory type mismatch
situation here. That is on guest VM side, the doorbells are treated as
device memory while on SPDK target side, it is treated as normal
memory. And this situation cause problem on ARM platform.
Refer to "https://developer.arm.com/documentation/102376/0100/
Memory-aliasing-and-mismatched-memory-types". Only using spdk_mb()
cannot fix this. Use "dc civac" to invalidate cache may solve this.
Profiling data did not show big performance degradataion.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I9a18718f8c4307b3007b18c32ab02e6796548958
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This RPC lists all PCI devices attached to an SPDK application. Each
device is identified by a BDF and contains a buffer with a copy of its
config space.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I852f421fde105d975458f8e63b8da4f92ed2c69b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10652
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
This function serializes a buffer as a hex string.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I09ab93bc626f6f6543b7c1ef033bcf807050862a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10651
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
These APIs are not safe, since they do not hold the
pci device lock across calls, which can cause problems
if a device is inserted or removed while handles
returned by these APIs are being used.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I01a80f26d0a0ca4cdfc7181359932b38da8dd43a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10659
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This is a safer alternative to spdk_pci_get_first/next_device,
since those APIs do not hold the lock between calls.
Future patches will remove those APIs, and change callers to
use this new API instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I71c7e8c1feb9112da8be32a8056b30e105e30463
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10655
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
If a subsystem has no listeners, then there is no need
to update the discovery log when adding a host, or setting
a subsystem to allow all hosts.
This eliminates some unnecessary discovery log update
notifications, especially when setting 'allow any hosts'
on a subsystem immediately after it is created (and before
it has any listeners).
Update unit test to check the adding a host to a
subsystem without listeners does not rev the genctr.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I63dab5df564269e574bb925890088f52063aa378
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The discovery log isn't updated when a subsystem is created
or deleted, it's only updated when a listener for a
subsystem is added or removed.
So remove the nvmf_update_discovery_log() in the subsystem
create and delete paths. They just generate extra AER
completions that potentially cause the host to do unneeded
work.
Note that if a subsystem is deleted with active listeners,
the subsystem delete path will remove each of the listeners
before deleting the subsystem itself. So the discovery log
will still get updated when those listeners are removed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id01bbfa3b24d3e1279a614a2fd60be41387a03b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The NVMe bdev module enables asynchronous IO QP creation by default, after
calling `spdk_nvme_ctrlr_alloc_io_qpair` and `spdk_nvme_ctrlr_connect_io_qpair`,
the queue pair is in connecting state at the beginning, then users may call
`spdk_nvme_ctrlr_free_io_qpair` immediately, and the common layer will
change queue state to NVME_QPAIR_DISCONNECTING and NVME_QPAIR_DESTROYING,
so in function `nvme_pcie_ctrlr_delete_io_qpair` the workaround to wait
for create cq/sq callbacks will not be called, instead of using the common
layer queue state here, we should use the internal `pcie_state`.
Fix#2245.
Change-Id: I801caf26563464b135035bf7fa2f63def13de9f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10445
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Batching will be made available for DSA specifically through the new
idxd_perf tool.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic51d9ad3692074805b1ffa705cea8be35737c778
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9846
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe bdev module will support two features, delayed reconnect and
delete after multiple failures of reconnect to improve error recovery.
The recently added two APIs, spdk_nvme_ctrlr_reset_async() and
spdk_nvme_ctrlr_reset_poll_async(), were not good enough.
spdk_nvme_ctrlr_reset_ctx was not necessary. It had only a pointer to ctrlr.
Using a pointer to ctrlr directly saves us from undesirable malloc error
processing.
Separate spdk_nvme_ctrlr_reset_async() into spdk_nvme_ctrlr_disconnect()
and spdk_nvme_ctrlr_reconnect_async(). spdk_nvme_ctrlr_disconnect()
disconnects ctrlr including disconnecting adminq.
spdk_nvme_ctrlr_reconnect_async() moves the ctrlr state to INIT.
Then rename spdk_nvme_ctrlr_reset_poll_async() by
spdk_nvme_ctrlr_reconnect_poll_async().
Finally deprecate spdk_nvme_ctrlr_reset_async() and
spdk_nvme_ctrlr_reset_poll_async().
The following patches will change the NVMe bdev module to use these new APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id1d6858dcdc5fc2e9db0a6ebf3f79cab4f9bbcb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10091
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Future patches will remove some of the more complex conditions
between different configure flags. As a result duplicate entries
might be present in DPDK_LIB_LIST.
Just for tidiness of the DPDK linker args, the DPDK_LIB_LIST_SORTED
is added. Using sort function removes duplicate entries in the list.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I318fd0cebbd30a80d281175b7d48bb3249abb841
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
This library was never used, remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5d0255f4b9ddbe98b349b4253f87e5332fe7057f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10526
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK supports only maintained LTS versions of DPDK.
For SPDK 22.01 this means DPDK 20.11 and 21.11.
This patch removes paths for earlier versions of DPDK.
There is no need to check if library is present for the following:
- rte_telemetry was added as rte_eal dependency in DPDK 20.05
- rte_kvargs was added as rte_eal dependency in DPDK 18.08
- rte_pmd_aesni_mb, rte_pmd_isal, rte_pmd_qat were removed in DPDK 20.11
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I30c4cdb0fe0634db50bc34d7d6c232806ff49960
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
At this time raid5 bdev does not depend on rte_hash in any way.
Meanwhile NVMe-oF Fibre Channel transport does.
This patch reflects that in the mk file for env_dpdk.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2ba3e016337866f80fc7a6043cef87bf33cf2373
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The nvmf library will use INTEL VID/SSVID/IEEE values by default,
each transport can overwrite them if needed.
Change-Id: I9dad521c4d080b6f0cc1aaeb4b5d5f6863c6846d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also we don't treat exceptions when getting INTEL log pages
as a fatal error, the initialization will still contine.
Change-Id: Ic2fd2be510fde2679c1546482934d0a180266936
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10341
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When NVMe passthru command (IO or admin) fails on submission (e.g. it
is not supported), set DNR bit in completion status field. There is no
sense in retrying the command in this case.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I55960c128bd9fc31f6defef0b9832259a71684b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8578
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If NVMe admin passthru command is not supported by underlying bdev,
set status code in NVMe completion to INVALID_OPCODE.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I29c4e1f8263b76b27c199cfd2d9b2474432ec70b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10517
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The originally detected problem is that SPDK NVMf target fails command
with invalid opcode with status code INTERNAL_DEVICE_ERROR instead of
INVALID_OPCODE. All unknown commands on IO queue are passed to
underlying block device layer as NVME_IO type. It is not checked if
this type of commands is supported and, when command fails,
INTERNAL_DEVICE_ERROR is set as status code. If command fails on
submission, status code is set to INVALID_OPCODE which is more
relevant.
This patch adds check if command type is supported to
bdev_nvme_*_passthru functions. If not supported, it is failed with
ENOTSUP.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I4d7f7639da17dd3b1dc3eee7eb1b4a4f876117a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
SPDK shouldn't use `free` to free the memory allocated by rte_zmalloc_socket.
Otherwises, the vhost-blk/scsi will continuously crash.
In this patch, SPDK don't free the dpdk allocated memory,
DPDK will free it finally. Add a flag to indice the resubmit handle.
Change-Id: I85fd84b7d27a091830006a0f84d541c48290cbb3
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10383
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Move the CONFIGURE_AER state before SET_KEEP_ALIVE to
make sure that we run the CONFIGURE_AER state for
discovery controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia4e24f6507c43e3fece06b9161ff8e0b8fa0e97d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We will actually run the CONFIGURE_AER state for
discovery controllers in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib114beb886ab4b9214e4525479eb5ec7e038e5d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10331
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
in case of failure groups shall be destroyed
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I8933f4128a7a3361bbb55d6a9c08a540521e5bda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10435
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Doorbell offset starts from 0x1000 is defined by the NVMe
specification, so rename it to remove `VFIO_USER` prefix.
Change-Id: Ie34b12b3d2618f9b0ad0cf7ccbb103ad2c900f47
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10364
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Calculate supported maximum number of queue pairs based on
BAR0 size, this value isn't allowed to change at runtime, also
define BAR4/5 based on number of MSIX vectors.
Since the maximum number of queues is a large value(512), so we
still define a default value when starting, users still can
overwrite this value with a number no greater than 512.
Change-Id: I1b4b6bdf2ff9d129c8bdd493ffdf0a51f8772d51
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10334
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
libvfio-user will save a copy inside the library.
Change-Id: If7bb052b03fb92e46abe50fa945b812d149ef01d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10363
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit d9561c444f.
This patch is incorrectly iterating the CPU mask assuming it is
contiguous. However, rather than fix it, let's just let the kernel
scheduler place the thread where it thinks is best. It's going to prefer
idle cores anyway. So reverting is the simplest way forward.
Change-Id: I7b66cce7bfb6ddb108aa7576f508aa3b02b79138
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10475
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These can produce a lot of output, which doesn't really give any
additional information.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I572cd203d61c717ce6400f67ef27ec1d7bb54c0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
adding transport to tgt should be the last step
also there is an issue before change i.e. if calloc failed then
transport remains on the list
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Iaf29cfc7b0f535d40160c6fdf9ef6a7e6bfb127c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10429
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For error case, just set ctrlr->num_aers to 0, and
then the loop won't execute at all. This avoids an
extra call to nvme_ctrlr_set_state() and simplifies
the code a bit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iff7bbf6e03d18b5f553b9e8527b4c803db583917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10330
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Discovery services using the SPDK nvme driver may
use long-lasting connections that detect AER completions
to determine when there are changes in the discovery
log. This means that we still need to send keep alives
on discovery controller admin queues. So move the
SET_KEEP_ALIVE_TIMEOUT state immediately after
IDENTIFY, and run the SET_KEEP_ALIVE_TIMEOUT state
even for discovery controllers.
Note, we need the IDENTIFY's KAS value to properly
set the keep alive timeout, so we have to keep the
IDENTIFY state before SET_KEEP_ALIVE_TIMEOUT.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c6403c28fb72d42629c5f9009a89c4bfd44d162
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10329
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Keep alive is valid for discovery controllers, so don't overwrite
the value requested with zero in nvme_fabric_ctrlr_scan().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7dcda6ebf4ab1c8a9085e4e3a02b814d8e586a97
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10328
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Next patch in series will look up the struct spdk_sock_group_impl
from spdk_sock_group in spdk_sock_get_optimal_sock_group().
Since this is third place it will be used, make this function common.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I43d6472016782e78709c1d52aa74abf594e5bfe6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10347
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When no optimal poll group exists for a qpair,
assignment for round robin happens in spdk_nvmf_tgt_new_qpair().
RDMA transport implments the logic for this assignment in
nvmf_rdma_get_optimal_poll_group().
TCP relied on the spdk_nvmf_tgt_new_qpair() instead.
This resulted in race condition when looking up and assigning
optimal poll groups - see #2113.
To remedy that, TCP now follows the same pattern as RDMA.
Next patch will improve the sock map lookup to fix the #2113.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I672d22ac15d06309edf87ece5d30f8e8d1095fbb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10270
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a bad memory corruption where the code for CUSE attempts to write
one byte (with value 0x1) after the memory is freed.
Context:
When the CUSE device is unregistered, the poller thread is signaled with
fuse_session_exit(), which writes the value 1 to fuse_session::exited.
The poller thread then detects with fuse_session_exited() that it must exit
the routing and finally destroys its own fuse session with
cuse_lowlevel_teardown() before it exits.
However, FUSE may also call fuse_session_exit() for its internal purposes.
I'm not sure exactly under what conditions that happens, but I added
some trace messages and I could clearly see that the CUSE thread exits
before it was requested to exit in cuse_nvme_ns_stop().
If the poller thread early-exits, it would destroy its own FUSE session
(and free the memory) before fuse_session_exit() gets executed, causing
the memory to be corrupted with a single byte of value 0x1.
Reproducer:
The bug can be reproduced by resetting the FUSE session to NULL after it
is destroyed. This will cuse_nvme_ns_stop() to crash with a segmentation
fault in fuse_session_exit() because it tries to access a NULL pointer.
static void *
cuse_thread(void *arg)
{
[...]
free(buf.mem);
fuse_session_reset(cuse_device->session);
+ cuse_device->session = NULL;
pthread_exit(NULL);
}
This fix:
The fix I suggest is to destroy the FUSE session with
cuse_lowlevel_teardown() after the thread is joined.
Signed-off-by: Sylvain Didelot <sdidelot@ddn.com>
Change-Id: I47202891a358f139506845110b012f840974b6fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9931
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_nvme_ctrlr_free_io_qpair can be called when
qpair is already disconnected. In that case qpair's
state is changed to NVME_QPAIR_DESTROYING and
transport's ctrlr_delete_io_qpair callback is
called. RDMA and TCP transports call
nvme_transport_ctrlr_disconnect_qpair in
the callback and since qpair's state is
not DISCONNECTED or DISCONNECTING, qpair
is disconnected for the second time.
If spdk_nvme_ctrlr_free_io_qpair is called
when qpair is in ENABLED state than nothing
changes, qpair will be disconnected before destroy.
PCIE/vfio_user don't implement transport disconnect
callback, so they are not affected.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I23e11856ecafb51669acf4a3118be049c11eecda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10326
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I58794b7b946eeb8ff82512905af0a296e3b534aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9817
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For DSM command, the NVMe drive may take a long time to finish it,
if we set a small timeout value for DSM command, the bdev/nvme module
will try to reset the IO queue pair when timeout happens,
in `spdk_nvme_ctrlr_free_io_qpair`, we will abort the outstanding
IO requests first, then in the `nvme_pcie_ctrlr_delete_io_qpair`,
we will poll the CQ for any requests that have been completed by
the NVMe controller, if there are NVMe completions in the CQ,
we will finish them again, thus double completions happened.
Here we rename `nvme_qpair_abort_reqs` to `nvme_qpair_abort_all_queued_reqs`,
so the common layer will just abort queued request, and let each
transport to abort outstanding requests case by case.
Fix#2233.
Change-Id: Icae6214239160c615418cb514fc51cfe77b59211
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a parameter which determines the owner of the
map - target or initiator. It allows to set different
access flags when creating Memory Regions
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0016847fe116e193d0954db1c8e65066b4ff82bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10283
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The unit test test_nvme_cuse_stop() manually creates 2 cuse devices
and executes nvme_cuse_stop(). Problem is that the Fuse session is
never initialized for those 2 cuse devices, causing cuse_nvme_ns_stop()
to access 'ns_device->session', which is a NULL pointer.
This bug is detected by ASAN as follows:
==77298==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000180 (pc 0x7fdac6d7d40e bp 0x000000000000 sp 0x7fff74768320 T0)
==77298==The signal is caused by a READ memory access.
==77298==Hint: address points to the zero page.
0 0x7fdac6d7d40e in fuse_session_destroy (/usr/lib64/libfuse3.so.3+0x1640e)
1 0x40dc7a in cuse_nvme_ns_stop /home/vagrant/spdk_repo/spdk/lib/nvme/nvme_cuse.c:851
2 0x40df59 in cuse_nvme_ctrlr_stop /home/vagrant/spdk_repo/spdk/lib/nvme/nvme_cuse.c:923
3 0x40f103 in nvme_cuse_stop /home/vagrant/spdk_repo/spdk/lib/nvme/nvme_cuse.c:1094
4 0x415803 in test_nvme_cuse_stop /home/vagrant/spdk_repo/spdk/test/unit/lib/nvme/nvme_cuse.c/nvme_cuse_ut.c:393
5 0x7fdac724c1a6 (/usr/lib64/libcunit.so.1+0x41a6)
6 0x7fdac724c528 (/usr/lib64/libcunit.so.1+0x4528)
7 0x7fdac724d456 in CU_run_all_tests (/usr/lib64/libcunit.so.1+0x5456)
8 0x415a4e in main /home/vagrant/spdk_repo/spdk/test/unit/lib/nvme/nvme_cuse.c/nvme_cuse_ut.c:415
9 0x7fdac62351e1 in __libc_start_main (/usr/lib64/libc.so.6+0x281e1)
10 0x403ddd in _start (/home/vagrant/spdk_repo/spdk/test/unit/lib/nvme/nvme_cuse.c/nvme_cuse_ut+0x403ddd)
The fix is to call fuse_session_destroy() only if the fuse session is != NULL.
Signed-off-by: Sylvain Didelot <sdidelot@ddn.com>
Change-Id: I41881243227d83e8d1e6b90e72c1b6d62ccd98d3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10225
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We allocate from the head, so it's better to free to
the head too for better cache utilization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c32244f446bd7a1df12eefc81245b3ef7e24070
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We allocate tasks from the head, so it's better to
free them to the head too for better cache utilization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67c23e3d89cda16f94b1770eada5465015ddb6ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10192
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The NOTICELOGs really clutter the output during
application start - it's better to make these DEBUGLOGs
instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ae37d5d057d7b972017befbc0834de414b9710b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This limitation doesn't really take effect currently,
since the typical number of slots per channel isn't
bigger than MAX_COMPLETIONS_PER_POLL. But there's
no reason for this limit anymore - we should always
poll as many completions as we find.
It's better to remove this now, in case we have
configs in the future with higher number of slots
per channel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5d90d41e5142622b79d9765fbc62da1516e2b8be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10189
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_bdev_io_get_nvme_status() does not follow NVMe abort command
about return values.
NVMe abort command sets completion status to SUCCESS both for success and
failure cases and differentiates only the bit 0 of cdw0.
lib/nvmf do not use spdk_bdev_io_get_nvme_status() but checks only
success or failure at completion.
So there is no issue now but let spdk_bdev_io_get_nvme_status()
follow NVMe abort command. In future, the user of spdk_bdev_abort()
may use spdk_bdev_io_get_nvme_status().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic4a08056bd8a1aee4c400f72ef5de7c68e23990b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9977
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The pointer to struct spdk_nvmf_ctrlr is used to save mandatory
controller registers to the migration region.
Also rename some ctrlr/qpiar to vu_ctrlr/vu_qpiar.
Change-Id: Ifcb862bf4543a9df3c62d3b0a57b7f93228ccaba
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
1. use the transport lock to protect transport endpoints list.
2. don't use mixed errno and -1 as the return value, use -1 for all error cases.
Change-Id: I657fa06a6d82ee8dbeefaa3397df2285ba574b80
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9579
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When destroying controller, we will disconnect each connected qpair,
and in the spdk_nvmf_qpair_disconnect() call, qpair_fini() will also
try to hold the same lock, so existing vfio-user implementation assume
that qpair_fini() will not be called in the same context. Patch
https://review.spdk.io/gerrit/c/spdk/spdk/+/8963 remind me that
vfio-user has this issue. While here, we add one more thread poll
to avoid such issue.
Change-Id: I83b82ddcce3eb54c724291223e794dcb53a08059
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9998
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For live migration support in vfio-user transport, we need to pause
the subsystem when starting migration in source VM, then after
migration, the subsystem is in paused state, when exiting the
application, we will call spdk_nvmf_subsystem_stop() at last,
and existing code will assert this case.
Change-Id: If5214c45973b27f6092c4a6d71ede336e54d89e8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9407
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
The recent changes merged multiple Data-OUT PDUs within the same
sequence into a single subtask up to 64KB.
However, they were not enough.
For a large write operation, the hardware iSCSI HBA host sent an immediate
data whose size was not block size multiples and then more solicit
data through R2T exchanges.
One example for a 64KB write operation was as follows:
host sent SCSI Write with 5792 bytes and F = 1
target replied a R2T
host sent Data-OUT with 15880 bytes
host sent Data-OUT with 11536 bytes
host sent Data-OUT with 2848 bytes
host sent Data-OUT with 11536 bytes
host sent Data-OUT with 5744 bytes
host sent Data-OUT with 12200 bytes and F = 1
The hardware iSCSI HBA host can decide the size of the unsolicited data
but the SPDK iSCSI target can require the host to send the solicited data
whose size is block size multiples.
Hence we merge immediate data to the following R2T data if the immediate
data is not more than 64KB and more R2T data come.
Add another test case to check if the fix works for the above example.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4906b4e1a8b61e08862f4ccc27a6caf165126530
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This clean up will make the following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1ad288ec16aec69a168e0f3019b68e11132b65c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9707
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Issue: spdk_top tracked pollers by the poller name string and the
thread_id they are running on. This shows incorrect stats when
multiple pollers exist on the same thread with the same name.
Solution: Added a unique poller id for each poller on a thread and
to allow spdk_top to track pollers by thread_id and poller_id.
Signed-off-by: Michael Piszczek <mpiszczek@ddn.com>
Change-Id: I1879e2afc9a929d1df9e8e35510f0092c5443bdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5868
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Wait until the namespace is attached, where it does this operation
again. As of this commit it doesn't really matter because it is just
filling in some values in a structure and if it does it twice it's not a
problem. But later when we only allocate active namespaces, we do not
want to allocate the namespace twice.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ie28653b178975d1ca80bf71ca6b5095224f1c5d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Eugene Kochetov <ekochetov@yandex.ru>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function destructs a single namespace and removes it from the
controller.
Change-Id: I4b7b3576beda85c9ddad4e0f2db6d1964fa72b82
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10024
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Eugene Kochetov <ekochetov@yandex.ru>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was sometimes used as the maximum array index and sometimes as the
maximum count. Make it consistent everywhere and give it a better name.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I518efd99a7d36584624490b0b3497bb6e81ce9ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10101
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
list
The list should always be null terminated, but add an additional layer
of buffer overrun protection.
Change-Id: Iee31057fdca5ec4a6177615dff5171e5cb07984e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10027
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Eugene Kochetov <ekochetov@yandex.ru>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This quirk was already applied to the 0x0A53 SSD, but is
likely needed on 0x0A54 as well.
Possible fix for issue #2231.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I36a48ab92d1698a411472f714b5108413bbc3c56
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10162
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the bdev-zone API, there are a few functions that takes a zone_id:
spdk_bdev_get_zone_info(), spdk_bdev_zone_management(), and the
spdk_bdev_zone_append() functions.
The way a zoned application is usually written is that it starts off
by getting the zone report for all zones (zone_id will be sent in as 0),
and then the application will keep the whole zone report in memory.
Therefore, an application usually have access to the zone_id/zslba for
all zones. However, there are cases, e.g. when getting an error on write,
where the completion callback will only have the lba of the write that
failed.
Add a helper function that can be used to get the zone_id/slba for a
given lba. Having this helper in bdev-zone will avoid SPDK applications
needing to provide their own implementation for this.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I978335f87f7d49bc33aed81afcaa6d9f0af8a1e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK vhost will call `new_device` when the VRINGs are
queue paired(virtio-net) or all the VRINGs are started.
However, for virtio-blk/scsi, SeaBIOS will only use one
VRING queue, DPDK added a workaround patch to add
`pre_msg_handle` and `post_msg_handle` callbacks to let
devices other than virtio-net to process such scenarios.
In SPDK, we will start the device when there is one valid
VRING, so there is a case that SPDK and DPDK have different
state for one device. For a virtio-scsi device, SeaBIOS will
only start the request queue, and in the BIOS stage, SPDK will
start the device but DPDK doesn't think so. If users killed
SPDK vhost target at the moment, in `session_shutdown`, SPDK
will expect DPDK to call `destroy_device` to do the cleanup,
but DPDK won't do that as it thinks the device isn't started.
Here in `session_shutdown`, SPDK will do this first, it's OK
that DPDK will call another `destroy_device` for devices that
have the same state both in SPDK and DPDK.
Fix issue #2228.
Change-Id: Ib76dd54c8fa302ffe6da9b13498312b7d344bbfe
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10143
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
_stop_session() is called while holding the global vhost lock,
and in the caller we do release the vhost lock, so even for the
error return from device backend, we don't need to release it
in _stop_session().
Change-Id: I08fef64f900bb42ee68bf02b4c4f1406e903a8a6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10142
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
`struct spdk_vhost_dev vdev` in `struct spdk_vhost_scsi_dev` can be
unregistered in `vhost_scsi_dev_remove`, so we can't use it
anymore in other places after `vhost_dev_unregister`.
Ideally `state->remove_cb` should not take the `vdev` as
the input parameter either, but I don't find it's used
anywhere, so leave it unchanged.
==29555==ERROR: AddressSanitizer: heap-use-after-free on address 0x602000006df0
READ of size 2 at 0x602000006df0 thread T0 (reactor_0)
#0 0x7f3c246c0f0a (/lib64/libasan.so.5+0x9cf0a)
#1 0x7f3c246c3c15 in vsnprintf (/lib64/libasan.so.5+0x9fc15)
#2 0xa55cfa in spdk_vlog /spdk/lib/log/log.c:158
#3 0xa5596f in spdk_log /spdk/lib/log/log.c:110
#4 0x842e43 in remove_scsi_tgt /spdk/lib/vhost/vhost_scsi.c:208
#5 0x851508 in vhost_scsi_dev_remove_tgt_cpl_cb /spdk/lib/vhost/vhost_scsi.c:1149
#6 0x8383f1 in foreach_session_finish_cb /spdk/lib/vhost/vhost.c:1144
#7 0x9d3223 in msg_queue_run_batch /spdk/lib/thread/thread.c:703
#8 0x9d73fe in thread_poll /spdk/lib/thread/thread.c:919
#9 0x9d7c3b in spdk_thread_poll /spdk/lib/thread/thread.c:979
#10 0x8812fe in _reactor_run /spdk/lib/event/reactor.c:920
#11 0x881bf1 in reactor_run /spdk/lib/event/reactor.c:958
#12 0x88292b in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#13 0x873ff9 in spdk_app_start /spdk/lib/event/app.c:585
#14 0x408044 in main /spdk/app/vhost/vhost.c:105
#15 0x7f3c23691f42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
#16 0x407add in _start (/spdk/build/bin/vhost+0x407add)
0x602000006df0 is located 0 bytes inside of 8-byte region [0x602000006df0,0x602000006df8)
freed by thread T0 (reactor_0) here:
#0 0x7f3c2473191f in __interceptor_free (/lib64/libasan.so.5+0x10d91f)
#1 0x8369f2 in vhost_dev_unregister /spdk/lib/vhost/vhost.c:1024
#2 0x84f32d in vhost_scsi_dev_remove /spdk/lib/vhost/vhost_scsi.c:913
#3 0x83cdb7 in spdk_vhost_dev_remove /spdk/lib/vhost/vhost.c:1494
#4 0x83ed66 in vhost_fini /spdk/lib/vhost/vhost.c:1644
#5 0x9d3223 in msg_queue_run_batch /spdk/lib/thread/thread.c:703
#6 0x9d73fe in thread_poll /spdk/lib/thread/thread.c:919
#7 0x9d7c3b in spdk_thread_poll /spdk/lib/thread/thread.c:979
#8 0x8812fe in _reactor_run /spdk/lib/event/reactor.c:920
#9 0x881bf1 in reactor_run /spdk/lib/event/reactor.c:958
#10 0x88292b in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#11 0x873ff9 in spdk_app_start /spdk/lib/event/app.c:585
#12 0x408044 in main /spdk/app/vhost/vhost.c:105
#13 0x7f3c23691f42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
Change-Id: I511c4316a838cd92961d57c9193d384acd49d760
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10141
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously task->current_data_offset was updated by add_transfer_task().
However, the following patches will merge unsolicited data and solicited
data into a single subtask. It will be possible that add_transfer_task()
is called but subtask is not submitted. As a preparation, extract
updating task->current_data_offset into iscsi_pdu_payload_op_scsi_write().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5262bb883fa2a081be1f087181de98d4c3c24d69
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9706
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When data segment size is 64KB and data digest is enabled, if
data segment and data digest are split into different two packets,
- pdu->mobj[0] became full first when reading data semgment,
- pdu->mobj[1] was allocated but unused and data digest was read.
In this case, two SCSI write tasks were submitted by mistake and
the second SCSI write task had no data.
Fix the bug in this patch.
When iscsi_pdu_payload_read() is called and pdu->mobj[0] is full,
allocate pdu->mobj[1] only if any of data segment remains to read.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9a0c36c05f90092c3c2122a7eb91e10976830b40
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9965
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We had not considered a case that incoming data to the second data
buffer was split into multiple TCP packets when merging incoming data
up to 64KB.
We do not change the unit test because we already have data check
and it is very hard to include partial read into the data check.
However, it is very usual that incoming data is split into multple
TCP packets. The feature to merge incoming data up to 64KB will be
actually enabled in the following patches. So we rely on the I/O test
to verify this fix.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I50d702d6c118bc16f0767845136e14414ccdf813
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9736
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The internal device list isn't used anywhere, and will cause ASAN
error because we didn't remove the entry from the device list when
destructing controller.
Change-Id: Ie97bf10ca44ff773a8bc5f0476611b3844ef901a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10109
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to sum SPDK_CEIL_DIV(length, io_unit_size) and
req->iovcnt as the later is always zero (assignment in spdk_nvmf_request_get_buffers).
Checking SPDK_CEIL_DIV(length, io_unit_size) is enough.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: I0fea1d86706d83e4dd9083e6f0ce09e4e4b033a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10089
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The specification says "host specifies an offset (i.e., LPOL and LPOU)
that is greater than the size of the log page requested, then the
controller shall abort the command with a status of Invalid Field
in Command."
Offset is used (if needed) to retrieve specific records of
Discovery Log Page, so we don't check it for Discovery Log Page.
Change-Id: I76ce929600b9f2ca9b69397d25f339d55729e6d3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10093
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This can be used for multipath validation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba62c5e90b22a9a85078fbc783d3a7273c029cde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10137
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
CAP.CQR (Contiguous Queues Required) is always 1, so we should
return invalid field when PC bit is 1 and return Invalid Interrupt
Vector if Interrupt Vector is too big.
Also fix the issue that just creat/delete a CQ.
Change-Id: I7cc64a5946a1ed3161448fca8b433d08e5fee715
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10080
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
PCI event module currently requires use of SO_RCVBUFFORCE socket option
which is restricted to CAP_NET_ADMIN. Retry with SO_RCVBUF for non-root
(unprivileged) processes where this capability is not available.
Return -ENOSPC if receive buffer is not of sufficient size.
Fixes issue #2224
Signed-off-by: Tom Nabarro <tom.nabarro@intel.com>
Change-Id: I0bed1b1eac0c7e8601d3d172d8027380ec8be391
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10126
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We already provides the API `spdk_nvme_ctrlr_is_fabrics` to return
input controller is fabrics controller or not, but it needs a controller
data structure as the input, so here we add another API to do the same
thing and it takes the transport type as the input, with this change,
both nvme and nvmf library can use the API.
Also we should treat UINT8_MAX(255) as valid fabrics transport type.
Change-Id: Ib62e7d3eca3da1ddb1a4cc55b0b62e274522f1ce
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10059
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes it more clear why reading a JSON
configuration file failed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9dae907c839d48068044b09f34b89a2de51cd811
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10057
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
ftl_dev_dump_bands accumulates a total in a local
variable, but the final value never gets used.
So just remove the variable completely.
Found with clang-13.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7a92f6bfa4ae56fc4d8189c887bf0f6d4a05d759
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10055
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As per the nvme specs,
If OPTPERF is set to ‘1’ indicates that the fields
NPWG, NPWA, NPDG, NPDA, and NOWS are defined for this namespace and
should be used by the host for I/O optimization
Setting NPWA, NPDG, NPDA same as NPWG and NOWS same as MDTS
Fixes#2197
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: Ic769a21b6821fa731eeae83e7d30c380e8092e37
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10007
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
User may configure opts.max_qpairs_per_ctrlr, so use
opts.max_qpairs_per_ctrlr instead of using fixed default
NVMF_VFIO_USER_DEFAULT_MAX_QPAIRS_PER_CTRLR.
Also do not allow users to configure max_qpairs_per_ctrl >
NVMF_VFIO_USER_DEFAULT_MAX_QPAIRS_PER_CTRLR.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: Id9f1f796559f3bb8b2d3f5031606050470681b99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9994
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We generally shouldn't do ERRLOGs based on bad
inputs from the host, so change some of these to
DEBUGLOGs instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id42a8e51964e0238cd2841be8ac1d4ccaa1d150d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10037
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Details of the changes here:
918fd2f146.
They mainly target the aesni_mb driver which was moved to ipsec_mb and
bump the minimal supported version of the ipsec to v1.0.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ica3b4fd66684751939159511845eb6ac6f7d5205
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10003
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
When doing controller reset and shutdown, we may change the
CSTS.RDY and CSTS.SHN even there are pending IOs in the IO
queues, so here we add a timer in the reset and shutdown
callback, it will change the status when there are no
connected IO queues.
Fix#2199.
Change-Id: I3a54d30b257973661b269ad5e37637490f9390f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9908
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK nvmf target reports all listeners on all subsystems
in discovery pages, kernel target reports only subsystems
listening on a port where discovery command is received.
NVMEoF specification allows to specify any addresses/
transport types. Ch 5: The set of Discovery Log entries should
include all applicable addresses on the same fabric as the
Discovery Service and may include addresses on other fabrics.
To align SPDK and kernel targets behaviour, add filtering
rules to allow flexible configuration of what should be
listed in discovery log page entries.
Fixes#2082
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie981edebb29206793d3310940034dcbb22c52441
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9185
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The qpair's state member is only 3 bits of a uint8_t,
and the in_completion_context bit is another bit in that
same uint8_t.
We know that the qpair's state is only ever updated by
one thread, but it is possible that the state could
be modified by one thread, while another thread
is modifying in_completion_context.
in_completion_context is only modified by the thread
that is polling the qpair (or the qpair's poll group).
But with async mode, another thread that has a qpair
on the same PCIe controller could poll its adminq and
reap the SQ completion for the qpair that's owned by
the other thread.
So do *not* set the generic qpair state to CONNECTED
from the SQ completion callback. Instead just set
the pcie_state to READY, and let the thread that owns
the qpair detect the qpair is READY and set the state
to CONNECTED itself.
Fixes issue #2157.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9efc0c954504f1841e1c3890ae78211ad0d1990e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9975
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
This reverts commit 3b1f13ef29.
It seems like this particular commit is causing failures on the
CI side related to the following issue:
https://github.com/spdk/spdk/issues/2214
Reverting for now to make the CI stable.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7f32c612b8549477de0b9079d114cec4ec9bda59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9986
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is a race condition between controller destruction and
subsystem state change, e.g. admin qpair may already be freed
when a namespace is added or removed. As result in function
poll_group_update_subsystem we may get heap-use-after-free error
Another problem is that some qpair's live time may exceed controller's
life time. To avoid it, start controller destruction process when the last
qpair finished the disconnect process (previously controller started
the descruction process before the last qpair starts to disconnect
and it could lead to raise conditions)
Fixes#2055
Change-Id: I11612979eb914a5fdcc7b9e3c812bf1e450b6120
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8963
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Matt Dumm <matt.dumm@hpe.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some of our tpoints have a name exceeding 24 characters.
Althought this is not problem for SPDK, it might cause
confusion, because error messages are printed.
Tpoints regstered inside fc.c had their _REQ_ part removed,
since it was used in all of them.
Fixes#2208
Change-Id: I598eb9c1d252d8ca6c83f82e564a6b53037936f4
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9963
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
DPDK will report error when detaching the PCI device in secondary
process, because SPDK will return -1 in `pci_device_fini`, so
here we will reset the `attached` flag before that.
Also return the errno instead of -1.
Change-Id: I3efa4d97ceab504215faeb9d3d80a694bdd6014c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7944
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
When intr mode is enabled, it will be common that
poller is unregistered during interrupt processing.
Since poller unregister is a delayed operation,
mark it in spdk_thread object, and reap unregistered
pollers out of poller execution.
Fixes#2143
Change-Id: Ieb61fc7685f85af5c15e833dd1dd56f8c97a3b12
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5770
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch makes use of the changes from previous patch and to
show connections between bdev events and tcp events.
Change-Id: If28c256d74a9a5d581ee4d8292a08fc061fee968
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9622
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Currently we do not have any way to connect traces from different
modules in SPDK. This change modifies our trace library
and app/trace to handle adding relations between trace points
and a trace object.
Additionally this patch adds classes and fields to structs
inside trace.py to prepare it for future patches implementing
printing relation information.
Change-Id: Ia09d01244d923957d589fd37e6d4c98f9f7bbd07
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9620
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
There could be an outstanding for_each_reactor operation
in progress when the application shuts down. If we don't
wait for that operation to complete, we'll get a memory
leak for its context.
So when stopping the reactors, before setting the
state to EXITING, do one final for_each_reactor to
ensure any outstanding for_each_reactor operations are
flushed. Once this final for_each_reactor operation
is complete, we can set the state to EXITING safely.
Also use a global mutex and flag to ensure no more
for_each_reactor operations can start while the final
for_each_reactor is in progress. If a new operation
is requested, we'll just ignore since the reactors are
shutting down anyways.
Fixes issue #2206.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d86eb3b0c7855e98481ab4164af82e76c009618
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9928
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
nvmf_ctrlr_cc_shn_done() and nvmf_ctrlr_cc_reset_done() are
almost same, so consolidate them together by adding a flag.
Change-Id: Ib7714d31a40f9d8d344ec2630c083c5d76dac8a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9907
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Currently either HW Engine Channel or SW Engine Channel will be used.
In the case that HW Engine Channel is used while does not support related
operations like IOAT for CRC, it will shift back to the SW Engine's handle.
So that this is an issue that it still refers to the HW Engine Channel
while needs SW Eninge Channel to handle.
This patch introduces the SW Eninge Channel and always initializes there
in case that HW Engine does not support some operations.
Related UT also added to simulate the case the IOAT does not support CRC
and then SW Eninge needs to properly handle it.
Change-Id: I4ecdcd09ab669a616b37c567b45b1e6499800ec9
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
In some cases a single virtually contriguos memory
buffer can be translated to several chunks of memory.
To make such translation possible, update structure
spdk_memory_domain_translation_result to use a pointer
to iovec.
Add a single iov structure or cases where translation
is always 1:1, it will make easier translation callback
implementation. For RDMA transport translation of address
is always 1:1, so treat iovcnt other than 1 as an
error.
Change-Id: I65605575d43a490490eba72c1eb19f3a09d55ec6
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9779
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of a union with domain type specific
parameters, store an opaque pointer to user
context. Depending on the memory domain type,
this context can be cast to a specific struct,
e.g. to spdk_memory_domain_rdma_ctx for RDMA
memory domains.
This change provides more flexibility to
applications to create and manage custom
memory domains
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Change-Id: Ib0a8297de80773d86edc9849beb4cbc693ef5414
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9778
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Push operation complements existing pull
operation and allows to implement read data
flow using memory domains.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Change-Id: I0a3ddcb88c433dff7a9c761a99838658c72c43fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9701
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's too strict to fail the controller when there are no free requests.
Change-Id: I0a66ff2d294a2fd9326506ea50af4213aaaf8e92
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9848
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
We already support Set Features with Host Behavior, so here also
add the support in Get Features.
Change-Id: I27d973e81fd6be89cc67ad559439334fc1087c9e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
nvmf_subsystem_get_qpairs RPC handler may cause the program
could not exit normally (e.g. ctrl c). Reason is that,
spdk_get_io_channel() will be called during the getting
qpairs stream, which will add refcount value for each
existing channel. When end target, channel cannot be
destroyed since refcount be added additionally and
its value could not be subtracted to 0. As a result,
the program will hang in the process of exiting.
So here we don't need to allocate a new channel, just use
the exist one.
Signed-off-by: zhaoshushu.zss <zhaoshushu.zss@alibaba-inc.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I08b4678edaa9404b8e8af125ebae572b31edf77e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9881
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- remove metadata updater
- handle 'zero' flag in mempool allocator
- adapt ocf_mngt_cache_start() to new OCF API
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: I34afd856cc1306ffe305f71a445e7474c9b0a2d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
OCF requires separate mempool for each request size from rage 4k-128k. Mempools
are meant for both IO and OCF's internal requests.
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: I3b37d287bbd6f963a24007c8485002f414fb8a7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adds context to currently existing traces inside bdev.c file.
These are going to be used later to match with traces from
nvmf layer to enable io tracing.
Change-Id: I599a60412f39144cdd306315a184b2000a61286e
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9497
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
This is to help with binding trace objects together and
for the convenience (all trace definitions are in one place
instad of being scattered accross multiple files).
Change-Id: Ib15bc9c2eeee9c4d0816bcee509ab69f3f558e19
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9574
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Enable tracing of tcp qpairs in lib/nvmf/tcp.c.
Change-Id: I692e74a972dcddd0bff193f1703470926e28b4db
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9288
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
This change aims to help with tracepoint handling in the future.
Instead of printing each trace directly with given values, we
will use this function to pass status change value.
Change-Id: Icc7f2863703899f818f0a2d5f49b69aa4e26a62c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9690
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
The new name suits better to the following "data push"
operation
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ic3249f65de203f375477f8e87b0749b9502d165c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9878
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For GET/SET FEATURES command, some feature IDs will have data buffer
while some don't have, so here we will return the buffer length base
on the feature ID. The length is defined by the specification.
Change-Id: Ie9798585fc74544b77998aeebc2a20614c1c25f0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is a bit confusing for the variable names to not match
the parameter names for spdk_bdev_io_get_nvme_fused_status().
These changes should make it a bit simpler to understand.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I833bf2a75cfec7b86da2d8a234f800de3510c2b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9867
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add the paired spdk_json_write_named_uint8|16 function
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ib7ee9ae4dbe9a4e9cfa28750f0b9a0af597d260c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9788
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous patches (5363eb3c) tried to work around the
32-bit unmap and write_zeroes LBA counts by breaking
up larger operations into smaller chunks of max size
UINT32_MAX lba chunks.
But some SSDs may just ignore unmap operations that
are not aligned to full physical block boundaries -
and a UINT32_MAX lba unmap on a 512B logical /
4KiB physical SSD would not be aligned. If the SSD
decided to ignore the unmap/deallocate (which it is
allowed to do according to NVMe spec), we could end
up with not unmapping *any* blocks. Probably SSDs
should always be trying hard to unmap as many
blocks as possible, but let's not try to depend on
that in blobstore.
So one option would be to break them into chunks
close to UINT32_MAX which are still aligned to
4KiB boundaries. But the better fix is to just
change the unmap and write_zeroes APIs to take
64-bit arguments, and then we can avoid the
chunking altogether.
Fixes issue #2190.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23998e493a764d466927c3520c7a8c7f943000a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9737
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
seems it is not required, string is used instead enum
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ic67af6cfa6f8e22a6593f904cd5b5c1b51cae6ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9623
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously we decided which LUN format is used by the macro constant
SPDK_SCSI_DEV_MAX_LUN. However, as long as we read SAM, the LUN format
can be decided per LUN ID.
Linux host SCSI driver supports 256 LUNs per SCSI device at the
maximum. So we cannot test this fix on any actual system but we
apply this fix for the potential future cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifa6a3b66431f5e1eade326348dd99b8b9653408b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9664
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most SCSI hosts, Linux, Windows, VMware, supports 256 LUNs per
device now, and it is not easy to test even if any other non-free
OS or driver supports more than 256 LUNs.
Hence increase the macro constant SPDK_SCSI_DEV_MAX_LUN from 64 to
256. Then we do not need to expose it publicly now. So move it to
lib/scsi/scsi_internal.h.
Update the CHANGELOG together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iacde46c3854f326eebfb8befb47d41fce383b027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9631
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change a fixed size array to a linked list to manage LUNs per SCSI
device.
Keep the linked list sorted by LUN ID because this is necessary to
efficiently find the lowest free LUN ID or check the specified LUN is free.
To avoid traversing the linked list twice, change scsi_dev_find_free_lun()
to return the LUN which comes just before where we want to insert an new LUN.
Additionally, previously spdk_scsi_dev_add_lun_ext() had not checked if
the specified LUN ID was duplicated. Fix the bug in this patch.
Add unit test cases for the function scsi_dev_find_free_lun().
These changes will enable the following patches to increase
SPDK_SCSI_DEV_MAX_LUN from 64 to 256 without consuming additional memory.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7f6f070ddc680127cf86ae255055da2d1d29e4ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9630
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the same effort as lib/iscsi.
By using spdk_scsi_dev_get_first_lun() and spdk_scsi_dev_get_next_lun(),
remove the dependency on SPDK_SCSI_DEV_MAX_LUN from lib/vhost.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib79d2c3f8e7a5027d3d2c03f8f886c588b86009b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9611
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use two new public APIs spdk_scsi_dev_get_first_lun() and
spdk_scsi_dev_get_next_lun() to manage iSCSI LUNs by linked list and
to traverse all LUNs of the SCSI device.
By these changes, we can remove the dependency on the macro constant
SPDK_SCSI_DEV_MAX_LUN from lib/iscsi.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3237e7f887dd761d6812ed4313f87b6e7884ea29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9610
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By this change, we will not need to traverse LUN list or tree in the
callback to hot remove.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibe72fba824553d0189b9120884aa2113599a568d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9627
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is an effort to remove the dependency on the macro constant
SPDK_SCSI_DEV_MAX_LUN from lib/iscsi.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieeff4136b16cc6bfa92614248f150bc9dfe3dc74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9609
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Add two public APIs spdk_scsi_dev_get_first_lun() and
spdk_scsi_dev_get_next_lun() to remove the dependency on the macro
constant SPDK_SCSI_DEV_MAX_LUN from lib/iscsi and lib/vhost.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6546697f823fe9f4fa34e1161f5c7fa912dd2d59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9608
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The spec treats the sizes (MQES or qsize from create/delete
IO queue command) as a 0-based value of uint16_t, but vfio-user
treats them as 1-based value, so we need to use uint32_t to
make sure the value can't overflow. The same for NLB(number of
logical blocks).
Change-Id: I7654b7e12234525c0fce78a713dd50097e9b3d58
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9632
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function is used to check the IO SQ or CQ exists or not,
so return bool type is better and also rename it.
Change-Id: I1af2a25255b012dcf1e1952b828617ededf9b897
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9680
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Andreas Economides <andreas.economides@nutanix.com>
Previously vfio-user will hit an error when creating a deleted IO SQ.
For lookup_io_q() function, actually we should not use the queue's
address to check the queue is exist or not, as when there is a memory
removal, we will also set the queue's address to NULL and reset it again,
so here we use the queue state to indicate the queue is exist or not.
Fix issue #2174.
Change-Id: I56bdd63947c2b30a598c427e64ff2dafe1cc1d2e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9605
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prior a regular round robin could result in strange performance
if an idxd device from another socket was used.
Signed-off-by: peluse <peluse@localhost.localdomain>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Id863c79067beabe73ef89d92b3fb3c436821b97a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For debugging purposes, take a name for identifying fds added to a group.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If1654e56e19f7fa964446ef1b9e71debf74979d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9731
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Object's statistics (its index and start timestamp) are now tracked and
updated in the trace entry object.
This is the final piece of code that had to be copied from the trace
app. The following patch will remove that code from the application and
replace it with functions from the trace_parse library.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1acaefb5a516bbc59c0549b2f66a5c52368bcd2c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If5f1b1bea0d30419be46e704ddd7c2f9556b4627
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tracepoint arguments are now reconstructed when retrieving next trace
entry (possible from multiple buffers). Similarly to previous patches,
the code is directly copied from the spdk_trace app.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie7594d381660ef31c286b5e124d2a6df3835111e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Detaching a controller with `no_shn_notification` flag set will follow
the regular detach path making it asynchronous too.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0b9c6c23626b4cc1cfaedb3268024776a07b9195
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9003
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The controller detach had asynchronous API (with async/poll), but the
register operations were synchronous, so they would block on fabrics
controllers. In this patch, they're changed to their non-blocking
counterparts, making the detach fully asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I74df12ab40a54f1d675639672e03755c89768bef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8726
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously we only use an assertion to address this sceanrio.
Fix issue #2173.
Change-Id: I7a6e715977218d2a3a08c48a9935880f3fe4ec63
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Andreas Economides <andreas.economides@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
According to the specification, we should also post an AER
error event for this error case.
Fix#2171.
Change-Id: Ifb2343453ea5e36ce244938a939537ee6ed1c4e1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9584
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a reference to %lu to remove the assumption
about the size of a long.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I622fd43e7acf2cb93d3ba4ba9e9367e6dd064a74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9663
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Added a definition of a parsed trace entry and a function allowing for
iterating over these objects. The difference between a parsed and a
regular trace entry is that it includes more information gathered while
processing the trace file (e.g. lcore, object statistics) and provides a
contigous buffer for trace arguments.
For now, only lcore and the pointer to the actual trace entry are
filled. Tracepoint arguments and object statistics will be added in
subsequent patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4d5e30a7abb4860a5ba9db46f64ceae8bd14646f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9433
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The trace file is now parsed and the entries are put in a map, sorted by
their timestamps. The code is directly copied from the spdk_trace app,
with very little modifications.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7929497ffd3079b6974f5423c82a6128db2cee98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9431
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It gives user access to things like the tsc rate and tracepoint
definitions.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib50126b331faa4508174c7cb707643a3d8db6a01
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9430
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Copied code responsible for mapping/unmapping the trace file. The
only modifications were related with tying it to the spdk_trace_parser
object.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia575101532c612b185bd971c69157623b52b9e81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9429
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This library will provide functions that parse traces recorded by an
SPDK application. This includes merging traces from multiple cores,
sorting them by their timestamp and constructing trace entries spanning
across multiple buffers. All of these tasks are currently implemented
in the spdk_trace app, so most of its code will be moved here (this is
the reason for using C++).
The motivation for extracting this code to a library is to be able to
use it from places other than the spdk_trace app, specifically the
`scripts/bpf/trace.py` script.
The main reason for creating a separate library instead of extending
libtrace is to avoid pulling in all of its dependencies. ISA-L is the
most problematic, as we only build it as a static library, which makes
it impossible to use with dlopen (making it unusable in scripts).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If101ca3425d7404abd51b0da2031358d0be44766
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9428
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We still don't support get log page with error
information LID.
Change-Id: I92db361dc956ea3ed4f6e7bdfdca763d0fea6886
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Similar is already done for json-rpc bdev_get_bdevs, it might be
useful for the upper layer which has no interest in all but only
in one specified.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ie1af1cb4778edd265914bbfdc2777f66c6c76572
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9362
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ifa8e80e0a25af7757181f480ab0405ec902a61ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9596
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
IO commands with invalid OPCs are not freeing the
associated request object after handling the response.
This would eventually result in requests on the qpair
becoming exhausted which ends up failing the controller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7c1c46265a38b31181cd5d9a98c528816ab482d3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When data digest is enabled for a nvme tcp qpair, we can use accel_fw
to calculate the data crc32c. Then if there are multiple
c2h pdus are coming, we can use both CPU resource directly
and accel_fw framework to caculate the checksum. Then the datao value compare
will not match since we will not update "datao" in the pdu coming order.
For example, if we receive 4 pdus, named as A, B, C, D.
offset data_len (in bytes)
A: 0 8192
B: 8192 4096
C: 12288 8192
D: 20480 4096
For receving the pdu, we hope that we can continue exeution even if
we use the offloading engine in accel_fw. Then in this situation,
if Pdu(C) is offloaded by accel_fw. Then our logic will continue receving
PDU(D). And according to the logic in our code, this time we leverage CPU
to calculate crc32c (Because we only have one active pdu to receive data).
Then we find the expected data offset is still 12288. Because "datao" in tcp_req will
only be updated after calling nvme_tcp_c2h_data_payload_handle function. So
while we enter nvme_tcp_c2h_data_hdr_handle function, we will find the
expected datao value is not as expected compared with the data offset value
contained in Pdu(D).
So the solution is that we create a new variable "expected_datao"
in tcp_req to do the comparation because we want to comply with the tp8000 spec
and do the offset check.
We still need use "datao" to count whether we receive the whole data or not.
So we cannot reuse "datao" variable in an early way. Otherwise, we will
release tcp_req structure early and cause another bug.
PS: This bug was not found early because previously the sw path in accel_fw
directly calculated the crc32c and called the user callback. Now we use a list and the
poller to handle, then it triggers this issue. Definitely, it will be much easier to
trigger this issue if we use real hardware engine.
Fixes#2098
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I10f5938a6342028d08d90820b2c14e4260134d77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9612
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This commit fixes a race condition when calling free_ctrlr(),
nvmf_vfio_user_close_qpair->free_qp will set controller `ctrlr->qp[qid] = NULL`
finally, when calling free_ctrlr() we also need to check `ctrlr->qp[qid]`
is NULL or not, when there are multiple IO queues, we need a lock to protect
`ctrlr->qp[qid]`. However, the call to free_qp() in free_ctrlr() is valid
only when killing SPDK target, for all other cases, e.g: VM disconnected,
the queue pairs are already freed, so here we can process these different
cases separately, and avoid extra lock.
Change-Id: I7ab71f08bf4d737843b2af42e27b1571be0b45e9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9351
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Ideally, SPDK should make sure no pending I/Os in this queue
pair are using the removed memory region. Currently we just
stop the submission path and leave a TODO comment here until
we have an asynchronous way to do this.
Also use the `<=` for the boundary check.
Change-Id: I63a2189022978811dc21f92f2599f28a5191ecd7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9352
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch revert commit 8f7d9ec. In function vtophys_iommu_init(), we
can use `dev->drvier` in RTE_DEV_FOREACH() loop to count number of devices
probed by device driver using vfio APIs, or we will count all the PCI devices
that bind to vfio-pci driver, only the probed device's IOMMU group is added
to vfio container.
The original implementation is correct to count `g_vfio.device_ref` in
vtophys_pci_device_added(), we don't need to count it in
vtophys_iommu_device_event() callback.
Fix issue #2086.
Change-Id: Ib1502a67960a49e9a2f93823cc8ceab2e8303134
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9236
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Abort any queued admin requests once admin queue gets enabled. A request
can get queued if a controller is being reset and it gets submitted
while admin qpair is being reconnected. If these requests aren't
aborted, the init process will stall, as requests don't get resubmitted
while controller is resetting and subsequent admin commands required for
the initialization would be queued too.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If456a297d2d434b3cc741816cbfb13b01d37e963
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow to return more than one memory domain.
This change aligns bdev and nvme API and provides
more flexibility for custom transports.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ica9b12ad8463c361be6cb62ee2c0513eec0b486d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9546
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Enable dump of transport stats in functional test.
Update unit tests to support the new statistics
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I815aeea7d07bd33a915f19537d60611ba7101361
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8885
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function may return an error and we should handle it
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I996ceb6e300bd9527385aded9068b2841e94a20d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9278
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
nvme_transport_poll_group_remove() clears qpair->poll_group. Hence
we should not use it after that.
Fixes#2170
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57ceee8c66684e2d02b51b8a0f3d66aacbcb9915
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9560
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
lookup_io_q() should return NULL when qid == 0 (admin queue). This
ensures that handle_del_io_q() won't delete the admin queue (which is
prohibited by the spec) and fixes#2172.
Also fixes a few related off-by-one errors.
Signed-off-by: Andreas Economides <andreas.economides@nutanix.com>
Change-Id: I7ab063f25bba45b755d84c9ddde82072cf01f5e8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9593
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We can avoid extra iteration to null queue pairs by using a list.
Change-Id: Idebd5a396959372004c33f8b21c555032af67aae
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9350
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Existing vfio-user assumes that the IO SQ/CQ are paired, so we
return an error when creating SQ with shared CQID.
Leave a TODO comment, we may support this in future.
Change-Id: I297ce53eb9a119469145e2453177d03252b629c8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9173
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Some spaces needed to separate some words from each
other.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a3f5b0a848ca9cc8771c11545652c275c194e89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9547
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Used to be in the lib directory but an upcoming patch needs
access to it so move it to a more appropriate location.
The changes in the .h file were needed to address compile
error when in the /include dir (didn't get errors elsewhere)
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I44d11fc620f213b13683d62dca899e2792ca6ed5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9450
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Renamed nvme_qpair_abort_reqs() to nvme_qpair_abort_reqs_with_cbarg() to
highlight the fact that it only aborts requests with specified cb_arg
and to distinguish it from _nvme_qpair_abort_reqs() which aborts all
requests immediately.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I32fec5ab0501b1beb8605689d73ec42a6424fba5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9323
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a controller is reset, it goes through the whole init process,
including establishing keep-alive, so there's no point in sending it
during that time. Additionally, it can stall the initialization if it
gets queued when adminq is connecting.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib9fee42f6097972e8ba336958f81e1b6b1a5f006
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9310
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Additionally, this patch removes reading the CC and CSTS registers from
`nvme_ctrlr_process_init()`, as it's no longer needed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If4f9e57dbf249fbce87e90018cff389f59906e38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8621
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When the controller initialization is failed due to not being able to
read the CSTS register, an ERRLOG is now printed instead of DEBUGLOG.
It should make it easier to debug initialization failures.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I42602bd08e263faf2e87fe4a68abcc82ddec11ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9556
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The CC register is now re-read again when disabling the controller as
preparation for subsequent patches, in which the synchronous CC register
read will be removed from nvme_ctrlr_process_init().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ibfc8ed85bab188c3938451fbdfb771b969157807
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8619
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The host driver should do a wmb() before it updates the SQ tail doorbell
to ensure that any writes to the SQ are guaranteed to be visible if a
doorbell update is visible (a store-release) - and indeed, this is what
the Linux NVMe driver does.
Therefore, we require a rmb() after we read the tail doorbell in order
to synchronise properly with the host driver (we need a load-acquire),
and guarantee that the updates to the SQ are visisble to us.
Signed-off-by: Andreas Economides <andreas.economides@nutanix.com>
Change-Id: I57eb1e1f0dfb1091a8f10f40f8ee0e2604d9268c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9514
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The CSTS reads in DISABLE_WAIT_FOR_READY_(0|1) states are now done
asynchronously.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4ca8ad286e259e8fcfbf484223288554280347fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Checking if the controller is enabled (CC.EN == 1) is now done without
blocking.
Additionally, a copy of the controller configuration register (CC) value
is now stored in spdk_nvme_ctrlr.process_init_cc. It'll be updated in
subsequent patches whenever the register is written / read. This will
make it possible to make several function non-blocking without having
send asynchronous register reads.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I8323cf0c31a5ea282840aab6cf8ca241ce8667be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8617
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is is the first patch in a series changing all register accesses in
the NVMe controller initialization path to be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic4df9890992eafb402cf3372fe2ff3ac3c503932
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8615
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This removes some code that was duplicated in the
CHECK_EN and DISABLE_WAIT_FOR_READY_1 states.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie5d175540f71c692f7784c7ff22a48f34b9b7082
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It will allow the async callbacks to retain the existing timeout while
changing controller's state.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4210f2cf7d4171444c338b8926334b985129a6c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8613
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will make it easier to set this timeout once the register accesses
are performed asynchronously.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9d61555a17380ddd57567db8dd912ef6d739fc01
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8612
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
