Need to check that a valid workload type was specified and print
usage if not.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib956e28f9049e49f19adcc09e861db42034799b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1900
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix the following warning by allocating status dynamically.
In function ‘nvme_completion_poll_cb’,
inlined from ‘test_nvme_completion_poll_cb’ at nvme_ut.c:546:2:
/var/jenkins/workspace/unittest-nightly-autotest/spdk/lib/nvme/nvme.c:92:3:
warning: attempt to free a non-heap object ‘status’ [-Wfree-nonheap-object]
92 | free(status);
| ^
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I321b88414f431c8c18617d3ee882b8ab851a70fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1940
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Deprecating INI tyle configuration has been a long time coming.
Feature parity is there between JSON-RPC and INI, which should
enable the switch.
All major applications support the JSON-RPC and tests were
moved to the JSON-RPC.
With above in place, it is time to give an explicit notification
to INI config users regarding the lack of support for INI.
In future release the INI configuration will be removed,
until then feedback from users is welcome on any
suggestions how to make the transition smoother.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If47375371791646f2afd06762b9bf6c5b8e009ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1941
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the related feature is already contained in
spdk_sock_listen and spdk_sock_connect functions,
we no longer need this function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1eafff0d139fa266a355fbee2bf0fc3947db69fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1876
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: Fix the unbalanced allocation of socket connection.
Suppose we have 4 spdk threads, then there will be 4 sock groups,
each on one spdk thread. And When using the NAPI_ID, each
sock group will be responsible for one NAPI_ID.
For example,
Poll group: A, B, C, D,
connection with NAPI_ID: 0, 1, 2, 3.
However if connection with NAPI_ID 2 exits first, and we will allocate
socket A (with the roundrobin manner, But not C again). So to avoid
this, we choose lazy free.
Since when the sock poling group is close, it will free them
finally in spdk_sock_remove_sock_group_from_map_table. So
there is no memeory leak, but eliminates unnecessary allocation/dellocation
on spdk_sock_placement_id_entry.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9bbc9139c8f8f3999eab7cd9259db2d683bd8466
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1873
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is called on hot path for I/O, inline it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iec40033eac19f2c66c2984623acb5e157a5ffe05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1723
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Recent CMB changes disable using the CMB copy and submission queue
at the same time, so disable use_cmb_sqs by default.
Also spdk_nvme_ctrlr_map_cmb() changed the "size" parameter used as
size of buffer that was mapped, so change it here too.
Change-Id: If957674042b7f4a08e272bf5f9f2ee29f50805cb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1955
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Commit 9ad044c4 remove the offset parameter in nvme_pcie_ctrlr_alloc_cmb()
and uses spdk_vtophys() to get the physical address of the submission
queue, however, the memory isn't registered to SPDK yet, so use the
offset to get the physical address again.
Change-Id: Ida0f4a8bf1e72d6446fba442a1b71f0ddaab4bb8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1933
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
By default print_max_len function prints up to end of
screen. With new parameter we can change the end of
string limitation.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I6b3583953e07c52d32f8cb33d678ff29fa639ec7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1150
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For now spdk_top only acquires data using RPC commands.
Next patches will add ncurses interface and expose
all the data.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I6ad5835a534d74e8aad868713cea43eb83e0d74f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1043
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allow multiple fio config files and fun them sequentially
in loop against provisioned Vhost+VMs setup.
This should decrease total time needed for performance
benchmarks as we can re-use current configuration rather
than provision from scratch for each workload.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0c4e37f0bb9f49f7614c8001d74d72b99470c084
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1899
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Hit assert when completion is done is response to internal connect
cmd. Fix by outstanding counter incr, add missing err handling.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2ba71f83432831fc043f2b6f6a5cba024045068b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1902
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
gen_nvme.sh requires that all the nvme devices are not bound to the
nvme driver which doesn't have to be the case when clear_nvme() is
called. To not depend on which driver is in use, simply iterate over
pci bus to find a proper device. This avoids additional setup.sh
ping-pong which is required to make use of gen_nvme.sh.
Additionally, upon exiting, in case mounts for given nvme device were
detected, keep the test environment reset to leave nvmes bound to the
nvme driver.
Change-Id: I428c5e2b0517553d267411a30316bde5d1ce8eef
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For the purpose to enable the stress test with Bit Bucket SGL,
here we added one new parameters: "bit_bucket_data_len".
For testing it, user should set "enable_sgl=1" and
"bit_bucket_data_len=4096". This means total 4096 Bytes of
data will be described by Bit Bucket SGL, note that the value
should be less than block size specified in the fio command
line.
We will count the Bit Bucket data from the beginning of each
I/O for simplification.
Currently it's only valid for READ test. User can see the
performance improvement when enabled the Bit Bucket.
Change-Id: Ia481a324c25942d6ca051c71cb90f87d21955259
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1623
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
When iterating SGL segment, we can use existing virt_addr parameter
to return UINT64_MAX as a special value to indicate this segment need
to be described as Bit Bucket SGL.
Currently only READ command is supported, we can enable the WRITE
and COMPARE support when necessary.
Change-Id: I50aa2b226ec3449c13ed1d97b3224ee8e7de95a8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1467
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the request contains separate metadata buffer, we should set
PSDT 10b when hardware SGL is supported and dword alignment is
required. SPDK driver doesn't provide SGL metadata data buffer
APIs for now, the separate metadata buffer is alway contiguous,
so we can put the metadata buffer into a data block SGL entry.
Change-Id: I9ccfce755a3169cd2c9b908e4da76081155d9613
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1466
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The rdma_disconnect call triggers an RDMA_CM_EVENT_DISCONNECTED
message on the target side. The hope is that the target side will
reply with the same message in a reasonable amount of time. If the
target doesn't have that mechanism implemented, print an error message
and continue with the process.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I164a3538714fa3adfc306ea0c88220ea710e7c39
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1879
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This also lets us get rid of the set_ibv_state function
since rdma_disconnect does the transition to the error
state for us.
rdma_disconnect triggers an RDMA_CM_EVENT_DISCONNECT on the
initiator side. This is important so we know when qpair ids
can be reused on the initiator side.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I87b80797c84ffa1d2cbe94cf37316b1b674b6c74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1878
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
As soon as we disconnect the qpair, the initiator can submit an
additional request to connect a qpair with the same qid as the
one we connected.
This series is aimed at making sure we don't acknowledge a disconnect
until we have cleared that bit.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I76d9312448a9740911465c146a195996cc567370
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1880
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Historically, we have immediately called the qpair
fini function directly from _spdk_nvmf_qpair_destroy.
However, to fix a race with initiators where we can get
a duplicate QID from the initiator, we will have to clear
the QID bit before calling qpair_fini. Clearing the QID bit
must be done on the controller thread, so we have to pass at
least two messages between calling _spdk_nvmf_qpair_destroy
and qpair_fini. This leaves a gap where we can poll the poll group
and reap completions for the qpair before we call qpair_fini and drain
all of the requests related with the qpair.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I337a0608f88fdda132b8a629a508c0263d2261c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As other small change, function iscsi_conn_pdu_generic_complete()
had been declared in conn.h but defined in iscsi.c. Move the
definition of it to iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1bd796288036f78a7cba8a1c0af93bd6bc19e9cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1890
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_iscsi_tgt_node_reset() is not implemented and the code to
call it is commented out. We will have to implement them from scratch
if we do. So remove them in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I63618b0f8857cb23b57f5a92ec363a91c1d5a912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1885
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
The following patch will remove the "spdk_" prefix from iSCSI
internal APIs. The iSCSI global data g_spdk_iscsi is also local in
SPDK iSCSI library. Hence rename it by g_iscsi for consistency.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If35e9d58b1388fd725a505ee9be870e414c37ba5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Do large reads from the socket and buffer into a pipe.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ibce74917a1cd7248ff1a325204c0d338cc6a3470
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1349
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
