Add an new RPC, nvmf_subsystem_get_controllers to retrieve the list
of NVMe-oF controllers of an NVMe-oF subsystem.
One of the main use cases will be to get identification information
of NVMe-oF controllers to configure their ANA states dynamically.
Pause and resume the subsystem to access the controllers safely.
One subtle issue remains. The JSON RPC returns success even if
resuming the subsystem fails. Write FIXME explicitly to address this.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibf8d1cf56850a705e343b86022d101b4c7204199
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3848
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
if mountpoint doesn't exist, fuse mount will fail and @bfuse
will be null, blobfs_fuse_stop() try to access it without
check which cause segmentation finally.
Patch also improve test messages output to include
terminator properly.
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Change-Id: Idba23e3922778f1985d1f4841a1701cdc272ef17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3863
Community-CI: Mellanox Build Bot
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add -a cli parameter to enable warmup stage.
Move ns_ctx statistics-related variable to a new structure
for easier cleanup.
Change-Id: Id536209bc49322f1bc9b5c2296f98f0183b7d4b9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3784
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Most common scenario is to run SPDK tests using "autorun.sh",
which calls autotest.sh with "sudo" and permissions are not
an issue then.
However we have a number of tests which are run independently
(e.g. test/fuzz/autofuzz.sh) and try to remove old temp files
before sudo is used to elevate privileges. This causes tests
to fail early.
Using "sudo" explicitly in autotest_common.sh to remove old
files will fix the problem.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I84f75c189bb04d0e3208dfc4f221d07d17db5ee5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3819
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
In practice, libubsan has been installed but there will still be such alarms sometimes.
In fact, this has something to do with the GCC version.
Most users may not think of it immediately, so they will be confused and waste time here.
So I think we should add a hint here.
Change-Id: Ib01cf4b35be5b75a3620aea556f4c097a1ee7a01
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3832
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
btrfs-progs and xfsprofs are required by some of the tests, e.g.
the nvmf/target/filesystem.sh.
abigail package provides abidiff needed for check_so_deps.sh tests.
Change-Id: I5199fafef2ac03ce04ea3709e9ff76fefa1ac717
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2923
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A subsystem RPC is not transitioned to a paused state when there
are ios outstanding (tracked by subsystem poll group).
In general AERs, are not tracked as outstanding IOs. However,
there are 3 paths in nvmf_ctrlr_async_event_request which do not
adjust the outstanding io count.
If we get into any of these 3 paths, the subsystem pause can hang
forever.
The issue was reproduced with hot plug stress testing under load.
We can get into the second path (SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE)
under these circumstances:
- An AER completion is sent to the initiator due to a namespace change
(e.g. hot remove/add)
- In this case, type is set to SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE
- The initiator sends a new AER admin command, hitting the second path
where we return without adjusting the outstanding ios.
Fixes: 1552
Change-Id: I45f781966cc1e9a601b2305c7985a21154d802e8
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3854
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These tests take significant amount of time on bare-metal systems
causing some random timeouts in the CI pool. Reclaim some time
by lowering the number of test iterations.
Change-Id: Id70e00230e0e49dc0f2f1ccc4d499420fc84d7dd
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3843
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make the footprint of the test smaller by creating smaller AIO file -
2G instead of 8G. Adjust offseting as well to not fall outside of the
device|file.
Also, cap in half the size of the source file.
Change-Id: I625eebe545477239606cd65ac6949cca4a2b8c80
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3842
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test is unnecessarily redundant since posix tests cover this
functionality in detail.
Change-Id: Ice7a6616a2106c098ff32595547371ea4c716d45
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3841
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There is a fatal bug that could easily cause data corruption when using
thin-provisioned blobs. In blob_request_submit_rw_iov(), we first get
lba by calling blob_calculate_lba_and_lba_count(),
blob_calculate_lba_and_lba_count() calculates different lbas according to
the return of bs_io_unit_is_allocated(). Later, we call bs_io_unit_is_allocated()
again to judge whether the specific cluster is allocated, the problem is it may
have be allocated here while not be allocated when calling blob_calculate_lba_and_lba_count()
before. To ensure the correctness of lba, we can do lba recalculation when
bs_io_unit_is_allocated() returns true, or make
blob_calculate_lba_and_lba_count() return the result of
bs_io_unit_is_allocated(), use the second solution in this patch.
By configuring more than one cpu core, md thread will run in a separate
SPDK thread, this data corruption scenario could be easily reproduced
by running fio verify in VMs using thin-provisioned Lvols as block
devices.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: I099865ff291ea42d5d49b693cc53f64b60881684
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3318
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
According to page35 in recent NVMe-oF spec (
NVMe-over-Fabrics-1.1-2019.10.22-Ratified), ioccsz is used
to restrict the incapsule size of I/O command, so do not
restrict the NVMe-oF OPC command and also the admin command.
We accidently trigger an bug in kernel since we do not send
the fabrics command with the incapsule and make the kernel
coredump, though the kernel has bugs.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I869a2c8ab7b9c2ac1e5cc5b603920662591c2c64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3837
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The bdev_examine_bdev api will examine a bdev explicitly. After
disabling the auto_examine feature, a user could call
bdev_examine_bdev to examine a specific bdev he/she wants.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: Ifbbfb6f667287669ddf6175b8208efee39762933
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3219
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When opal_revert_and_init() is interrupted for some reason,
the spdk_tgt still exists, but it should be killed at the same time.
Change-Id: I8546d3b0b4d6a0fda1687558a664decb535ef2b4
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3830
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When using nvme perf program to test against NVME-oF target,
the nvme perf program will hang if we kill the NVMe-oF target.
For example, if we run the following command:
1 On the target side, start a SPDK NVMe-oF target;
2 On the initiator side, we run:
./build/examples/perf -r 'trtype:rdma adrfam:IPv4 traddr:192.168.7.55 trsvcid:4420' -q 128
-o 4096 -w randwrite -t 100
3 Then we kill the NVMe-oF target on the target, the nvme perf program
will hang.
For NVMe perf program, I think that we should check it in
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia864394acdb6e705484dd0db6f015b567eb527a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3774
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the transport is broken, we should set errno code in
spdk_nvme_ctrlr_process_admin_completions instead of keeping silence.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie73763e1329e12a8c82a0223d360991f86c39be3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3773
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows for much more granular control over the timeout.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib23de21e60eec4207c55320579699edf284f4e16
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3794
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Generally, this patch did the following work:
Remove the destruct poller. I think that we do not need this,
the destruct poller is specially for Softwaare RoCE case.
Since SoftRoCE will not have IBV_EVENT_QP_LAST_WQE_REACHED event,
we will not wait the last_wqe_reached flag when srq is enabled.
So we can avoid using the poller.
And the purpose of this patch is to solve the coredump issue.
For example, if we run rdma local test such as, e.g.,
test/nvmf/host/bdevperf.sh --transport=rdma
The coredump reason: the qpair is freed twice. Because for RDMA transport,
we do not really remove the qpair from the group if the upper layer
does it.
The first time is called by nvmf_rdma_destroy_drained_qpair in nvmf_rdma_poller_poll,
and the second time is called by nvmf_rdma_qpair_reject_connection in
in nvme_rdma_close_qpair. Since nvme_rdma_close_qpair will always called,
so we need make sure that the qpair will be close after calling this function.
Otherwise we will have the double free qpair. So our approach here is add a flag
("to_close")in rqpair structure and make sure the rqpair be freed after the
"to_close" is set nvme_rdma_close_qpair
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6f97debbcd29bbb7c6e3f9725907b4102a1d2892
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3661
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Originally, config->offset was defined as int type.
When the capacity of SSD is very large, such as 8T(P4510),
then bdev->blockcnt2 is 7814037168, config->offset is 3907018584.
At this time, it exceeds the maximum int range of 2147483647 and
becomes a negative number, resulting in core dumped.
Debug info:
config->filename is Nvme1n1.
make_cli_job_config offset is -387948712.
This should be:
config->filename is Nvme1n1.
make_cli_job_config offset is 3907018584.
Change-Id: Ia83d88cc4e56d6c97a6d3fc1a2593b6fc31655b2
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3818
Community-CI: Broadcom CI
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add MaxR2TPerConnection to iSCSI global options and make it configurable
by JSON RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ida95e5c7dac301a22520656709e1aa4d611f31ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3777
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By the recent refactoring, we have no static size array for outstanding
R2Ts per connection. It looks that we do not have any critical reason
to prohibit us from making max outstanding R2Ts per connection configurable.
There are some use cases to use large write I/O intensively (e.g. 128KB).
Let such use cases change the value of max R2Ts per connection by their
responsibility to do performance tuning.
Maximum outstanding R2Ts per task are defined both for iSCSI target
and NVMe-TCP target but maximum outstanding R2Ts per connection is
unique for iSCSI target.
The next patch will add the corresponding iSCSI option.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4f6fd3c750a9a0a99bcf23064fe43a3389829aa9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is likely that the raw number 8 in the macro NUM_PDU_PER_CONNECTION
means 2 * DEFAULT_MAXR2T and the raw number 2 means R2T and Data Out, but
is not certain.
On the other hand, the next patch will make the max number of outstanding
R2Ts per connection configurable.
As a preparation to the next patch, add 2 * DEFAULT_MAXR2T explicitly
to the macro NUM_PDU_PER_CONNECTION.
The next patch will replace DEFAULT_MAXR2T by an new variable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8a3be14d53c0abf11d7aade401386601d8fe6c11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3783
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Other count variables in iSCSI library have used uint32_t rather
than int.
Change the type of spdk_iscsi_conn::pending_r2t from int to uint32_t
and add assert to check if pending_r2t is not negative.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9bd296c0142b0808ae822952277c9ecc133e5f62
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add MaxLargeDataInPerConnection to iSCSI global options and make
it configurable by JSON RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibcd16da2eac64241217bedeb89a7929bbdc67871
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3756
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will add an new parameter max_large_datain_per_connection
to the iscsi_set_options RPC. It is longer than the column width of
the parameter table.
As a preparation, increase the column width of the parameter table
for the iscsi_set_options RPC first.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0f27d608f9c186166cf7a132ae786ba70e398d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3782
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For some use case that there is heavy large read I/O, the performance
bottleneck due to MAX_LARGE_DATAIN_PER_CONNECTION was reported.
The following assumes that all I/Os are large read.
Large read primary task whose I/O size is more than
SPDK_BDEV_LARGE_BUF_MAX_SIZE (=64KB) is split into multiple
read subtasks.
spdk_iscsi_globals::MaxQueueDepth limits maximum number of outstanding
read primary tasks, and MAX_LARGE_DATAIN_PER_CONNECTION (=64)
limits maximum number of outstanding read subtasks.
MAX_LARGE_DATAIN_PER_CONNECTION is also used to calculate PDU pool.
To remove the performance bottleneck, change the macro constant
MAX_LARGE_DATAIN_PER_CONNECTION to a global variable
spdk_iscsi_globals::MaxLargeDataInPerConnection.
We don't see any negative side effect if we set
spdk_iscsi_globals::MaxLargeDataInPerConnection to 64.
The use case that reported the performance issue will change the
value of spdk_iscsi_globals::MaxLargeDataInPerConnection by its own
responsibility.
The next patch will add the value of
spdk_iscsi_globals::MaxLargeDataInPerConnection to iSCSI options,
and make it configurable by JSON RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc30cdb8e00d50f4d3755ff399263cf5d0b681b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is to avoid including non-matching pattern as an actual item.
Change-Id: Ie4fbb27e66efa1f56618959bb7db6f0fccfc2847
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Get rid of WITH_DPDK_DIR and SPDK_RUN_INSTALLED_DPDK,
introduce SPDK_RUN_EXTERNAL_DPDK which can point to
a DPDK dir. It's an empty string by default.
Change-Id: Iff2b3773a4614db07f4196165087a79472e02b9a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/867
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When browsing https://spdk.io/doc/changelog.html
left hand side navigation bar is missing some of the
releases.
This is due to missing 'title' of particular release
that is signified by ":" right after version number.
This patch adds missing ":" and fills out missing titles
for all releases, so they show up properly on the website.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3bcb0b2e819d311a033d78101034a7adb2c3395a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3748
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Originally the idea was to disable error checking,
to match output from Kernel and SPDK NVMe cuse.
This includes passing test commands and failures.
Any discrepancy would be caught by log output diff
at the end.
Flaw in this logic is that test command itself might
be incorrect. We shouldn't depend on that, nor
attempt to cover up some of the failures even if
they occur on both interfaces.
Most probable cause for this at all, was NVMe emulated
in QEMU not really working with all the nvme-cli commands
from this test.
Since the original creation of this test, CUSE executes
on physical devices (to be able to support namespace management).
The behavior there is predictable and works with current
test commands, thus the test exits on any error with this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I086faf38b2cbbb6225935cc50d4fad14e81f1972
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Helps us avoid adding a new I/O qpair while the ctrlr
is being destroyed.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3bf9318b075125b9d432b885fa9f6f2f44d422d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3686
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By the previous patches, updating redirect portal and requesting
logout are done using different RPCs. Update description to reflect
this change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id1f00bde39446bc2a8de9635135136b8f0194faf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3781
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For the login redirection feature, the current implementation works
only if a portal is redirected from an initial portal to a redirect
portal. However, the login redirection feature should work even if a
portal is redirected from one redirect portal to another redirect
portal.
A public portal group knows only a redirect portal and does not know
the portal group of the redirect portal.
Moreover, it is very likely that an initial portal and a redirect portal
exist in different SPDK iSCSI target applications.
To cover all these concerns, add an new iscsi_target_node_request_logout
RPC to request connections whose portal group tag match for the target
node.
To cover potential use cases, make the second parameter portal group
tag optional.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I612672490722fb22fd4eba055998b7408ab84ca5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As written in doc/iscsi.md, typically the login redirection feature
will be used in scale out iSCSI target system, which runs multiple
SPDK iSCSI target applications.
In scale out iSCSI target system, the initial portal, the current
redirect portal, and the next redirect portal are likely to be in
different SPDK iSCSI target applications.
In this case, asynchronous logout request should be sent independently
from the iSCSI target application which has the current redirect portal.
However, we had added asynchronous logout request into the iSCSI target
application which has the next redirect portal. This idea works only
for the case that login is redirected from the initial portal to a
redirect portal.
We remove asynchronous logout request from iscsi_target_node_redirect()
in this patch, and update the corresponding help documents.
The next patch will add an new RPC to send asynchronous logout
request to all connections to the specified portal group and the
specified target.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib0ac72e8cdad7e8c64e446b7495e572fac4b5bae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3779
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These suppressions are only valid for the course
of one release. Now that we have started with a
new release, remove all of the suppressions.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I1a36bc49bb3a16f98de870cc06e56dbfa75d72d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3722
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The target changed how we deal with custom AERs
so we can't post them and expect to get an
immediate return anymore. The fuzzing application
doesn't expect to not get a return value from the
target so it just spins forever until it times out
and fails. The solution is to not send AERs over
the wire with the fuzzer.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I24fc890dfc05601953552c98690950d0981d70fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Put the NVMF_SECOND_PORT and NVMF_THIRD_PORT to common file.
And clean some wrong comments.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I2ccd420551bfa686a0d46e317b7a8767b171c2d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3761
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
VPP implementation and tests are no longer present,
the skips can be safely removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7a5f194ae87caae897bab53eca1370f56584ba94
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3735
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch removes implementation of VPP socket abstraction
along with ways to compile it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I089f7703cfc4fb517f8f80f4368e544bced549b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All VPP tests were the same tests as usual posix iSCSI tests.
TEST_TYPE was used to direct which tests to run and in some cases
with what parameter.
Since VPP is deprecated, this type of selection is no longer needed.
All tests will run with default socket abstraction.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I292f1b5141ec8c4dacb4a43c6f51e4d30501a92a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3730
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since VPP is deprecated, this is no longer required.
rpc_config tests will work for posix and uring
the same for this test.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibc7bd76ea47ca137f3eb4484782cc64ff748fe22
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3729
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
