Adds a note for JSON objects and arrays inside struct spdk_json_val.
Additionally deletes double space in section about len field.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I5d52b37a7e8023df09e16cbf9805bd6775abc5c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Windows will always sends a Set Feature Interrupt Coalescing even
SPDK reports we can't support it in Get Feature command. Here
we return Feature Not Changeable instead of Invalid Field which
is more meaningful.
Change-Id: Ie08086c3eba1e2d790a7ae4976653b6f9085028c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8923
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This package is no longer available in PyPI.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3e68b03eabeb4aff14453c90846fd03452c93ae2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8956
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Parses and verifies hexadecimal cpu bit mask specified by the user.
Added verification to check for cpu cores range, making sure poll groups cores
assigned within the range of cpu cores allocated for the application.
RPC nvmf_set_config now takes an argument to configure ‘poll groups’,
a new parameter for NVMf subsystem. This parameter sets a CPU mask
to spawn threads which run an event loop for a ‘poll group’.
Change-Id: Ied9081c2213715ec94de00a8b37153730b8ac2ed
Signed-off-by: Yuri <yuriy.kirichok@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5611
Community-CI: Mellanox Build Bot
Reviewed-by: Matt Dumm <matt.dumm@hpe.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
.ctrlr_connect_qpair
Previously this was assumed to be a synchronous process so the generic
layer transport code updated the state after .ctrlr_connect_qpair
returned. In preparation for making this support asynchronous mode,
shift that responsibility down into the individual transports.
While none of the transports actually do this asynchronously, insert a
busy wait in nvme_transport_ctrlr_connect_qpair to wait for the qpair to
exit from the CONNECTING state. None of the upper layer code can
actually correct handle a transport doing this asynchronously, so the
busy wait will cover that.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3c1a5c115264ffcb87e549765d891d796e0c81fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8909
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If there is hardware issues, we do not need to assign
the result. Because we will report the error status to the uplayer.
Change-Id: I647ddd609a1d5d0d52cc4fee59699b9992da4fa4
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8864
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Those functions are exported publicly, so better to
add some assert functions to detect some null pointer
errors.
We do not use if/else check, because it is too heavy.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I16814efb84a5a41876657f0caf5f0a6d0c2db8f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8863
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This assert is used to make sure that there is no
active batch (spdk_accel_batch) task is used.
If there are active batches found, it means that
we did not handle this case in a good manner.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7ea6247d2d5a40cf4f3f31cd8b1240fed4648d62
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8857
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
After compiling SPDK with `--enable-ubsan` option, ocf tests fail with the
following error:
src/ocf/mngt/ocf_mngt_common.c:170:2: runtime error: member access within
misaligned address 0x200003800188 for type 'struct ocf_cache', which requires
64 byte alignment
The mentioned line of code is `list_for_each_entry()` macro used for iterating
lists. Forcing `struct list` alignment removes the issue.
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: I803dd962ff873679f42568e6f42fec7fed278f67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8516
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The assertion should verify that a clone has been found. Without the
dereference, it makes no sense, as that pointer is dereferenced earlier.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I67fa17b33df6d507822a17ffc221a6d360985646
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8919
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using `bs_allocate_and_copy_cluster()` instead of a zero-length write
makes it possible to inflate/decouple snapshots, as the writes would
fail with -EPERM, because the snapshots are marked as read-only.
Additionally, zero-length non-vector requests are now completed
immediately. It makes it consistent with the vector path (which already
does that) and allows us to use the zero-length reads as a context for
cluster copy.
Fixes#2028.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib7fdee352972ecf808833aa179820d85cfab7eed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8918
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
93c4adda4d did not take
DPDK 21.05 release into consideration.
Change-Id: I9cc6a0fb7cb600d6ad08fc9eca1cbcd5e3c25d14
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8835
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
36b5a69bb0 "trace: fix the snprintf warning issue"
2ac1521581 "test/compress: fix Wstringop-overflow warnings"
These patches are needed to make sure SPDK's refs can be compiled
under GCC 11 (e.g. fedora34).
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7e3800351b02506c99ba8ac7f4d40312867e1ab9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8790
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The data buffer isn't available at the beginning.
Change-Id: Ieeb1a297ff52dfdc6cd999d04862a0cd96483650
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8932
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There were a few references to "SPDK thread context", which are no longer
relevant in the current codebase. Additionally clean up another XXX to be
clearer as to the context, and fix two minor typos.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I2aeda8aaa0edc973fdb67feccc32d792c5f7292e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8548
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
If the process doesn't terminate before we try to create a new iscsi
node, the socket might still be in use by that process causing the
`bind()` call to fail.
Fixes#2052.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic6c32774b3c3d7008b1089f151fc933177f28aac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8902
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Split the NVMe controller reset into pre-init and reinit stages so
that the latter begins with a call to nvme_ctrlr_process_init(),
returning -EAGAIN if the controller is not yet ready so that a poller
can call it again later.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: Ia182b04e438241b139109be93f3ed858fac7f3d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: Only Open image on one spdk_thread
due to the limitation of librbd module in order to
eliminate the lock overhead among different
spdk_threads on operating on the same image.
Change-Id: I64c62e8ae1c3324b92cfd953b44ec08af6688530
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6812
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
BUG FIX: call nbd_bdev_hot_remove will stuck if
it is called when nbd has in-flight IOs.
nbd_bdev_hot_remove is asynchronous. It will
guarantee the stop of this nbd.
nbd hot remove test will be added later
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I0a0dfab31fafd3d61212ade53c74ad05dbbff268
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8039
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is done since previous version is not compiling anymore under
latest fedora33.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I8f65d5e47af81f01221eb8699c3323c3f8099f38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8916
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This is first commit that should go into latest SPDK
after the code freeze for SPDK 21.07.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib8c7a0e9d8594271119e4c9d0340528003798a92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This parameter is still part of API spdk_sock_impl_opts
structure but it is not used. Keep it to support ABI
compatibility since it is located in the middle of the
structure and removing it may break socket opts initialization
or parsing.
Change-Id: Ib641ad7d965d68bc9ebb65dba531408d88cf6fa1
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8914
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implemented nvmf code to allow transports to use ZCOPY. Note ZCOPY
has to be enabled within the individual transport layer
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I273b3d4ab44d882c916ac39e821505e1f4211ded
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Revise the if case to avoid the assert issue.
Change-Id: I095f3d111423e17abaa1f951fe22efb3d2e851b7
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added new entries missing from CHANGELOG.
Net library was removed so deprecation.md was modified.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I062149129aaf854b3038d1ab5291eb5e56ff35b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8897
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Sorted current entries and typo/formatting errors in
preparation for SPDK 21.07.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I108ef6ffb65a4f3bc713696c5f2d4ef8903d192a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Modified get_pollers_data() function to use already sorted
poller array across spdk_top.
Modified related display functions and sort_pollers() to
accomodate the change.
Deleted prepare_poller_data() and copy_pollers().
Modified show_poller() to use a single entry from pollers
array instead of all of them.
Modified refresh_pollers_tab() to handle changing
number of entries in a different manner.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I26936fbc96e7cb598a33b2fe4354b03277d88061
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8638
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Create local structs to fill with RPC data, sort and then
copy into a global poller array inside get_pollers_data().
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I545392cbdc699e4d96f1d39611a6e694e209c25d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8234
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
get_last_run_counter() and get_last_busy_counter() upwards
Moves these functions above get_pollers_data() for use in next patch.
Moves enum sort_type to the section with struct definitions.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I795c02a660e987f5e9689dab07f14479d1026d99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8057
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch aims to reduce number of core structures.
All related functions that use global core structures are reworked.
Part of code with poller and thread counter per core is moved to
data gathering function.
Additionally deletes double newline between functions.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I31034e5d889fe24b067a407ca348ba07c58ce6b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8565
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This batch_op field is not necessary because we can
use the comp_ctx->desc->opcode to judge whether it is related
a batched task or not.
Change-Id: Id329221ccf272c4c3bb8c1b5ec08433029a9a1f8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8865
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This reverts commit 5e03beae70.
As it happens, Soft-RoCE is not capable of handling all the test cases
in the vhost suite.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iccbbe3a7314cc68bb4feca700fa6d943c961bd2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8894
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
