Reservation Acquire Action(rqcqa) is used for reservation acquire command, since
we have replaced cdw10 with specific commands fields, so split the two cases to
make the code looks more clear.
Change-Id: Ib2a2458dd0fe8345f1c33341dab1c4fe3b82829f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476838
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVMe command dword 10 and dword 11 have multiple definitions for
different commands, add a union data structure here then we can
replace the hardcoded cdw10/cdw11 with command specific structure
in SPDK NVMe driver. For now add dword 10 for the first step.
Change-Id: Ie2c58b3039cfa5843d44224d31a38850ff577ed0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add coverage to the path where we dequeue multiple ops for a
bdev_io and one of them has failed. Confirm that the bdev_io
gets failed.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie864b63819f506da43fdcad960c26a48a01196c7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472417
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A recent change in the CryptoDev API means that failure to enqueue
all attempted submissions does not automtically mean busy. We need
to check the status of the last submitted op and only retry if
busy, otherwise fail the IO.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0873d07a430a08f5aee25581e47187ef60ba8542
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472400
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously we would sit in the submission routine and spin on the
poller and then retry in the event that we could not get CryptoDev
to take all of the ops that we had available.
The implementation was fine however a recent CryptoDev change
requires us to now check the status of attempted submissions
instead of assuming that the device was busy. If there was
another reason for the failure we don't want to retry or we'll
be stuck in an endless retry loop.
Changing the current device full handling to match what was
done in the compression vbdev makes it easier to handle the
new condition and also makes the two vbdevs more consistent
with regards to how they manage the DPDK framework API.
This patch only changes how we handle full conditions to put
the ops on a linked list and resubmit them the next tie the
poller runs naturally. A following patch will handle the
CryptoDev API change that instigated this change.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Idcb6e06b6826045f23e59b64eca051f3eee2b850
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472309
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The first IP is not configured until after nvmftestinit.
Change-Id: Icfc4ce40e357d36da2c50fefb3b967806966eb80
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476648
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
In nvmftestfini we try to kill the nvmf application, but this doesn't
get set by nvmftestinit. I think that nvmftestfini and nvmftestinit
should be symmetric options, or at the very least, one should be able to
call fini right after calling init without fini failing.
Change-Id: I14f274f940ec20c2d5f8d831fed3f6d6c4c6d2ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This worked fine as-is with Python 3. But when
trying to run rpc.py with Python 2, it was noted
that simply doing print(ex) didn't print the message,
it needs to be print(ex.message).
Note that the similar code for printing the exception
message when running an RPC script was already doing
print(ex.message), so this change also makes the
code more consistent.
We aren't supporting or testing rpc.py with Python 2,
and there are some fairly significant mods required
to get it to work, but this small change at least
reduces that effort for those needing to implement
it and maintain it themselves.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0a6c94889dc631ef33835433f20f35ddc738aafb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476633
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
When we get an error when calling an RPC, client.py
makes extensive use of the ** operator to add
the method and req_id to the params dict variable.
This doens't work with Python 2. We don't really
support Python 2, but there are at least some folks
out there who make their own mods to get rpc.py
to work with it. We can very easily implement this in
a way that is Python 2 friendly, so let's do that
to make it a tiny bit easier for those folks.
Incidentally, I do think the changes here also make
this part of the code a bit easier to read and
understand.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1846c80e21032ffba67128bee946b041a61d0621
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476632
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is to fix below issue:
https://github.com/spdk/spdk/issues/1076
The problem is that the semaphore is not increased and
the wait operation time out.
Change-Id: I56e950d0705663b35de9257f17c400c31636ee34
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476048
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In iSCSI library, macro MATCH_DIGEST_WORD() and MAKE_DIGEST_WORD()
have been used instead of match_digest_word() and make_digest_word().
The latter has not been used for a long time. Hence remove them.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0fdb5c24a120a08fe06f825ee5e6c24ba64c0edf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This log has been observed often after recent refinements but
this log does not mean any error. So use SPDK_DEBUGLOG instead
of SPDK_ERRLOG here.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3aa39ab3773ae83586c99699fd2473ca02c35eb9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475182
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I23ea7101030c6d2d3fbccba878bdf77d89b814cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I39431b213216b1e4e677f80de8c14c40dd7da150
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Other than code movement, fix a typo.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib55fe86295f47c1c86bb99d5e3a6862f508bfcfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I82fe06e3488a1c623c5fc875cf797790ee4ea48f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2f7dd681ca430c810dac6fcea122f84a142152d7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476411
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch series orders login related functions top down in iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8e123177124b4526e9bbe9001293c6f668b9c3bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476410
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
conn->data_out_cnt does not control anything now but adding assert
for conn->data_out_cnt will be helpful at least to ensure that the
current SPDK works correctly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I31ee90769ce0555e64bd41c283e8b437326efebf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476409
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
iscsi_conn_free_task() is used only when exiting connection now.
Hence we can remove the parameter lun and simplify the function
and its unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6e7bf09672edca1f70c042ac58f098114d71ec78
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476115
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
We ensure current pending tasks are aborted and no new task or PDU
is pending after LUN is unplugged now. Then we have to ensure all
task completions and aborts are sent to initiator.
However, we had removed pending tasks without any notification to
initiator. For this implementation, we are not surprised if initiator
waits for in-flight commands for a long time.
Due to recent refinements of LUN hotplug, we can wait safely that
all existing tasks complete or abort.
In _iscsi_conn_hotremove_lun(), after aborting R2Ts, start a poller
to wait until all PDUs for the LUN are flushed. Then close the LUN.
We can safely free deferred PDUs for the LUN because they are
already flushed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I869b79a7c93d2e8a4a1577cc20d3b466548dfaaa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476033
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We want to use poller for LUN hotplug in iSCSI library. According to
the naming used in SCSI library, rename iscsi_conn_remove_lun by
iscsi_conn_hotremove_lun. The next patch will iscsi_conn_remove_lun.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I08bb8c92db23ac3adcde4f39c0e812f3d97430d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476114
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Previously we had allocated temporary context, struct
_iscsi_conn_remove_ctx to process LUN hotplug. However, we
had to consider out of memory during connection is active,
and we could not use any poller to process LUN hotplug because
LUN hotplug may conflict with connection exit, and this
possible conflict made us very difficult to use poller for LUN
hotplug. Introducing struct spdk_iscsi_lun will resolve all
these issues.
Allocate struct spdk_iscsi_lun per LUN and store connection,
LUN, and LUN's descriptor into the struct. Then use the struct
for LUN hotplug and free the struct after LUN is closed when
LUN is removed or connection exits.
struct spdk_iscsi_lun is similar with struct spdk_nvmf_ns in
NVMf library.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ice26330f3948070c96d2fb53b94941be3b467079
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476113
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to the subsequent patches.
Subsequent patches will introduce struct spdk_iscsi_lun
to refine LUN hotplug process and fix critical issues of it.
This change will make us easy to introduce struct spdk_iscsi_lun.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I75db59d88bb09ee2ea94e8c02e0e87003352850c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476112
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
In _iscsi_conn_free_tasks(), we had parsed conn->write_pdu_list
and then parsed conn->queued_datain_tasks. However when we parsed
conn->write_pdu_list, if there was any task in conn->queued_datain_tasks,
some PDUs were inserted conn->write_pdu_list. Hence after parsing
conn->write_pdu_list, new PDUs were in conn->write_pdu_list as orphan.
Then orphaned PDUs were freed later but LUN was already freed and
critical failure occurred.
This patch swaps the order of conn->queued_datain_tasks and
conn->write_pdu_list, and add comment to explain the change.
Additionally, this patch adds unit test which fails if it runs
without this fix.
Fixes issue #1030.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icb0ffbbbac70792a62939dc55a69df05d2ab9128
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a iSCSI write is large and split, if LUN is removed between
creating and submitting the last subtask, spdk_clear_all_transfer_task()
completes the primary task and then process_non_read_task_completion()
tries to complete the primary task.
This is the double free case, and the later have to be skipped.
We add a flag is_r2t_active to struct spdk_iscsi_task and use it to
check the duplication. We may be able to use primary's initiator task tag
(ITT) instead but we can not rely on ITT because it is set by the initiator.
We clear is_r2t_active even when primary is removed from
conn->queued_r2t_tasks but it will be no harm.
Fixes the issue #1064.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia6511bd7adaa8fcb9a07bc40d498e8ee0b7a7ccf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In process_non_read_task_completion(), when the current I/O is
not split, we have to call only spdk_iscsi_task_response().
The next patch will fix the github issue by changing the path
executed when the current I/O is split.
Hence to make the fix easier, this patch separates split case and
non-split case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic1603609f760c4bdd41272ba6146e260f668b059
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475043
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To improve the value of unit tests, this patch adds task hierarchy
and update and check of reference count to unit tests.
Besides, replace memset by initialization at definition to reduce
number of lines.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id8315faeb8f5a62f621b7c41a30c1d09aca4ae0e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The type of pdu deferred to be free only have
two types, R2T or DATA_IN. And the two types of pdus
are all assoicated a task, so updateing both the code and unit test case.
Also for all pdu free, we should use spdk_iscsi_conn_free function since
for normal pdu free, we all use this function.
PS: I also tested the calsoft local, it does not trigger the assert.
Fixes#1074.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0524965baf5349a100210ef717aedaa5f8ff105e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475657
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This revert commit 6e4e85dcef.
Causing intermittent build pool failures. We had different operations
in remove_acked_pdu() and _iscsi_conn_free_tasks(). The patch tried
to unify them but was wrong. The operation in removed_acked_pdu()
was correct. This patch restores it. The next patch will fix the
operation in _iscsi_conn_free_tasks().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia398fd295769b786ba4777cc9f7df6e134f15e48
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Purpose: Simply the code, doing data_cnt_in every where
will make the code diffcult to maintain. If we put the
management in iscsi task get and free related function, then
the code will be easy to be read and easy to maintain.
Change-Id: Ib9af067326630657877a94afc2eb0db28f5d5fd1
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474914
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: Do not let the primary task do the I/O if it is
splitted into subtasks. This will make the code simplier,
when all the sub I/Os are finished, we can free the
primary task.
Update the corresponding unit test also.
As a result of this change, when read I/O is split into subtasks,
the primary task uses only some of its data. Hence separate
iscsi_pdu_payload_op_scsi_read() into split and non-split
case explicitly.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9bbe4b8dd92a2996f35ad810b33676e34670c77e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473532
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We don't really need to link the env for these unit tests.
We were doing it mostly for convenience. We can easily
leave out the env library, and just define a few stubs
for the functions that the memory unit tests call.
This helps prepare for the next patch that will use
rte_malloc/rte_free to allocate mapping structures. By
not linking the env libraries, we can just stub
rte_malloc/rte_free with simple malloc/free, rather than
doing a full env initialization to get rte_malloc/rte_free
working.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I007290299ab801fbc1b8fd6f633937314d4b1f8c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476517
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
The code is exactly the same - we can just have
spdk_mem_map_clear_translation call spdk_mem_map_set_translation
with translation = map->default_translation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6a2ce39b0397be9d29b1a4c1cdfba15025afba7a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
SC2119: Use foo "$@" if function's $1 should mean script's $1.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I8366debbf83dfc8f3c1033e1e9fe3df17e45ab49
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove from shellcheck excluded SC2090: Quotes/backslashes
in this variable will not be respected.
After fix SC2089 this warning is not actually present in
any of spdk/spdk scripts.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibe0015b569202eb7d3f3197f5c5630a67e701332
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2089: Quotes/backslashes will be treated literally. Use an array.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I40d4eef334cd030294669f8e8494f9e7a563d495
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is possible overflow when getting throughput as
that value is in byte and we also use tick for the
calculation.
Change-Id: Id1f0fd4903af5e8362f1fcafebac33223d36eb34
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unify all distro selections to use the same generic/* source
for downloading boxes.
"generic/" is provided by Roboxes.
Change-Id: Id5d704e35313c382a564da2a50177766293a88c1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476160
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There is no "wheel" group on Ubuntu distros. Chown command
caused Vagrantfile to fail.
While at it - put the whole bash command flow into a variable
and run it as part of single "shell" provision step instead of
doing it in three steps.
Change-Id: I2853d4176f66f07f1762b339b20ced3386486f87
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Dash and double dash ("-" and "--") getopts params are safely
shifted using "shift" and "OPTIND". After that it's safe to
concatenate param array to string using "$*", especially that
there is only 1 positional parameter, which is distro version.
Previous approach ("$@" as array) made "export" impossible and
as a result VM was created with Fedora 28 distro on each run.
Change-Id: I48fa588220f8b7f46c561d480ee32920847c7903
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476128
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
This is a workaround for issue #1083.
Using constructing nvme_pcie_ctrlr to access spdk_nvme_ctrlr,
this avoid reporting :
Memory access at offset * overflows this variable.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: Ided625f95ff33df277c28e0410e946f99b787550
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
It fixes change 474989.
"for blkname in $blknames; do"
was changed to
"for blkname in "${blknames[@]}"; do"
if blknames=" vda" then first blkname="" and
linux_bind_driver is called for vda although it has active mountpoint
Change-Id: I16d4379db274faa5703230072cfcf8d18a8ef5e6
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476061
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was previously named "active" as in "active
namespace". But we're really using this flag to keep
track of whether the namespace structure is currently
populated with data structures, bdevs, etc. for the
associated namespace. If we find an active namespace
on an SSD that is not populated with bdevs in the
bdev/nvme module, then we need to populate it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie66a5ffbcb52dd0e8f8e67a14f66f19d325d91bd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This gives per-type ns handlers a way to associate
the generic nvme_bdev_ns structure to any type-specific
context.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id632b41bc3ad842c8ec5e836436bd081e8cad496
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475926
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
