Keep alive is valid for discovery controllers, so don't overwrite
the value requested with zero in nvme_fabric_ctrlr_scan().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7dcda6ebf4ab1c8a9085e4e3a02b814d8e586a97
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10328
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I713b2908fb124c76380b66659a1f646548fe1b70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10205
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Next patch in series will look up the struct spdk_sock_group_impl
from spdk_sock_group in spdk_sock_get_optimal_sock_group().
Since this is third place it will be used, make this function common.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I43d6472016782e78709c1d52aa74abf594e5bfe6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10347
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When no optimal poll group exists for a qpair,
assignment for round robin happens in spdk_nvmf_tgt_new_qpair().
RDMA transport implments the logic for this assignment in
nvmf_rdma_get_optimal_poll_group().
TCP relied on the spdk_nvmf_tgt_new_qpair() instead.
This resulted in race condition when looking up and assigning
optimal poll groups - see #2113.
To remedy that, TCP now follows the same pattern as RDMA.
Next patch will improve the sock map lookup to fix the #2113.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I672d22ac15d06309edf87ece5d30f8e8d1095fbb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10270
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a bad memory corruption where the code for CUSE attempts to write
one byte (with value 0x1) after the memory is freed.
Context:
When the CUSE device is unregistered, the poller thread is signaled with
fuse_session_exit(), which writes the value 1 to fuse_session::exited.
The poller thread then detects with fuse_session_exited() that it must exit
the routing and finally destroys its own fuse session with
cuse_lowlevel_teardown() before it exits.
However, FUSE may also call fuse_session_exit() for its internal purposes.
I'm not sure exactly under what conditions that happens, but I added
some trace messages and I could clearly see that the CUSE thread exits
before it was requested to exit in cuse_nvme_ns_stop().
If the poller thread early-exits, it would destroy its own FUSE session
(and free the memory) before fuse_session_exit() gets executed, causing
the memory to be corrupted with a single byte of value 0x1.
Reproducer:
The bug can be reproduced by resetting the FUSE session to NULL after it
is destroyed. This will cuse_nvme_ns_stop() to crash with a segmentation
fault in fuse_session_exit() because it tries to access a NULL pointer.
static void *
cuse_thread(void *arg)
{
[...]
free(buf.mem);
fuse_session_reset(cuse_device->session);
+ cuse_device->session = NULL;
pthread_exit(NULL);
}
This fix:
The fix I suggest is to destroy the FUSE session with
cuse_lowlevel_teardown() after the thread is joined.
Signed-off-by: Sylvain Didelot <sdidelot@ddn.com>
Change-Id: I47202891a358f139506845110b012f840974b6fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9931
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is to allow display_thread to use the function in
the next patch.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I2c059c344b91f89011fa58f0289dc07bc8b97818
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7999
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There is a problem with data display after interface resize
when user performs these actions:
1. Run spdk_top with multiple data pages
2. Switch to the last page
3. Enlarge interface increasing window height significantly.
After following these steps user is presented with a blank tab
with no records and incorrectly displayed page info (i.e. 3/1)
and has to manually switch back to the pages containing
selectable records.
This patch forces spdk_top to display first data page after
vertical resize.
Change-Id: I4f8eb27f360e44140f9db7a80e57d299847ca0af
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8979
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change 821d8e2 introduced a bug in pollers tab - user
might select rows below last displayed poller and possibly
crash the application when invoking a pop-up details window
there. This patch aims to resolve the issue.
Change-Id: I9aa3a42e2327a27597a48b32dd8e9fa216e2b17e
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8978
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_nvme_ctrlr_free_io_qpair can be called when
qpair is already disconnected. In that case qpair's
state is changed to NVME_QPAIR_DESTROYING and
transport's ctrlr_delete_io_qpair callback is
called. RDMA and TCP transports call
nvme_transport_ctrlr_disconnect_qpair in
the callback and since qpair's state is
not DISCONNECTED or DISCONNECTING, qpair
is disconnected for the second time.
If spdk_nvme_ctrlr_free_io_qpair is called
when qpair is in ENABLED state than nothing
changes, qpair will be disconnected before destroy.
PCIE/vfio_user don't implement transport disconnect
callback, so they are not affected.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I23e11856ecafb51669acf4a3118be049c11eecda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10326
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Running the nvmf_abort test outputs so much error logs and it is very
noisy. Running nvmf_abort for 1 sec will be enough.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2700828c228e1cc03e73675c5f3f683dbf3a57d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10299
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In the following patches, bdev_nvme_reset() will execute the reset ctrlr
operation on the nvme_ctrlr->thread until completion as bdev_nvme_admin_passthru()
does. Hence change the callback bdev_nvme_reset_io_continue() to
redirect to the orig_thread by using bio. Furthermore, use bio->cpl.cdw0
to store the completion status of the reset processing. bdev_nvme_reset()
does not use bio->cpl.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I361cc44494190ba83ad6e360788d78851416c46c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10074
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the following patches, bdev_nvme_reset() will execute the reset ctrlr
operation on the nvme_ctrlr->thread until completion as bdev_nvme_admin_passthru()
does. Hence change the callback rpc_bdev_nvme_reset_controller_cb
to redirect to the orig_thread by using a dynamically allocated context.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8ee61857ac034024d00190875740a675ef1db8b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10073
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch supports admin passthrough retry when we get any error
with DNR=0 but ABORTED_BY_REQUEST up to retry_count times.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1bf29570791fdbe8651fa70c4c8685bb740fb86b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9944
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When resetting ctrlr, adminq is disconnected first. If adminq is disconnected,
admin passthrough request is rejected with -ENXIO.
But resetting ctrlr may succeed. If resetting ctrlr succeeds, adminq is
connected again, and admin passthrough request will be
submitted successfully.
On the other hand, if ctrlr is failed, admin passthrough request is
rejected with -ENXIO. But when resetting ctrlr, ctrlr is set to unfailed.
Hence bdev_nvme_admin_passthru() skips any ctrlr which is resetting
or failed, and calls bdev_nvme_admin_passthru_complete() with -ENXIO
if no available ctrlr is found.
bdev_nvme_admin_passthru_complete() queues admin passthrough request
and retry it one second later if ctrlr is resetting.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic748dc4faf29ebf717ae5c29dcf7c55fe2ea9243
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9942
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Change-Id: Ia1431a9aad103ebc80e9071b984ee152c7a27a53
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9891
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I58794b7b946eeb8ff82512905af0a296e3b534aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9817
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For DSM command, the NVMe drive may take a long time to finish it,
if we set a small timeout value for DSM command, the bdev/nvme module
will try to reset the IO queue pair when timeout happens,
in `spdk_nvme_ctrlr_free_io_qpair`, we will abort the outstanding
IO requests first, then in the `nvme_pcie_ctrlr_delete_io_qpair`,
we will poll the CQ for any requests that have been completed by
the NVMe controller, if there are NVMe completions in the CQ,
we will finish them again, thus double completions happened.
Here we rename `nvme_qpair_abort_reqs` to `nvme_qpair_abort_all_queued_reqs`,
so the common layer will just abort queued request, and let each
transport to abort outstanding requests case by case.
Fix#2233.
Change-Id: Icae6214239160c615418cb514fc51cfe77b59211
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For any processed events, the function actually returns the number of them, not 0.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: I37bb456925e0b02c51276af169107e609d2bf301
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10229
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This packages is not available anymore. In addition, centos8, by
default, is not shipped anymore with a kernel that supports btrfs.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I185218c65f06b0e2fceab169139dcdc7b63657bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Versions of centos we support - 7 and 8 - don't ship with ruby which
can handle installation of the mdl gem due to unmet dependencies -
it's simply too old.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id0a3843bcab12b8de332d1d3f64956f043c347e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9483
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I723526e80b5b491945b90f0baccda2a3fcc4fb03
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10309
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Get shfmt package according to arch.
Change-Id: Ib51feb64368e1ef559c886d9899dd7a1f28cff95
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a parameter which determines the owner of the
map - target or initiator. It allows to set different
access flags when creating Memory Regions
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0016847fe116e193d0954db1c8e65066b4ff82bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10283
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
current test only include intel acpi-cpufreq and pstate. Add test
of cppc_cpufreq which works on most arm platforms.
Change-Id: I5b34c15be7992e5a521d6acf7b5c30a0c4baaf9a
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9404
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow to specify optimal IO boundary for
malloc bdev, it can be used to test split
of IO requests on generic bdev layer
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ic3529dc00cf852ea5cf40d0553d846a698fff6c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10068
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This test application can now be run on several cores,
queue depth, io size, mode and time can be specified.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I6aa6b9c0319fc22ed68aafa076ab6ee81e301474
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9809
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added a new cpu column to the thread and core tabs to display cpu
usage as a percentage.
Signed-off-by: Michael Piszczek <mpiszczek@ddn.com>
Change-Id: I0ab9d6bef9caaa60d26a86a99bc0aa436b899c7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5867
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ic9f19145d8e1f0caa7880dfc70cba9796273bb4a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10261
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In case of linux systems, which don't provide /etc/os-release, the
ID would become plain "linux" (due to a fallback to uname). This
would result in a confusing message stating that we don't support
a "linux" platform. Instead, be specific as to what we are looking
for and what distros we support.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If6a71ea08b315f54c906206165e3dbcd4c21379c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10260
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is already provided by the autotest_common.sh.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id5c51701240c11c058a7e46662263f510a4fef0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10256
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie7be39fb224fffbf36c02ceb1d9fe97491aba6e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10238
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It provides LLVMgold plugin libraries needed by the ld.gold for the
LTO build.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7686244278d19c6137661ef93eb70737dc8b6006
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10258
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This function is part of test/nvmf/common.sh which is not included
in the test/common/autotest_common.sh. This makes autotest_cleanup
unusable unless parent script sources test/nvmf/common.sh directly.
To make its scope more obvious, put the revert_soft_roce() inside
autotest.sh.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id8a8cf448d73abb6fe924b452f984f6e5381266f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10206
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This makes it compatible with the FreeBSD version.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I99707f07f8a74e5ca90074bfc69bdaa524ed2ad4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10207
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It's more forgiving in case of small changes that force some fuzzing
like formatting changes. For instance, this change is currently breaking
our vs-dpdk builds:
f88b0b8922
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I8816ad59f930fa61ec081ac13e35129060f6cb86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10135
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
The unit test test_nvme_cuse_stop() manually creates 2 cuse devices
and executes nvme_cuse_stop(). Problem is that the Fuse session is
never initialized for those 2 cuse devices, causing cuse_nvme_ns_stop()
to access 'ns_device->session', which is a NULL pointer.
This bug is detected by ASAN as follows:
==77298==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000180 (pc 0x7fdac6d7d40e bp 0x000000000000 sp 0x7fff74768320 T0)
==77298==The signal is caused by a READ memory access.
==77298==Hint: address points to the zero page.
0 0x7fdac6d7d40e in fuse_session_destroy (/usr/lib64/libfuse3.so.3+0x1640e)
1 0x40dc7a in cuse_nvme_ns_stop /home/vagrant/spdk_repo/spdk/lib/nvme/nvme_cuse.c:851
2 0x40df59 in cuse_nvme_ctrlr_stop /home/vagrant/spdk_repo/spdk/lib/nvme/nvme_cuse.c:923
3 0x40f103 in nvme_cuse_stop /home/vagrant/spdk_repo/spdk/lib/nvme/nvme_cuse.c:1094
4 0x415803 in test_nvme_cuse_stop /home/vagrant/spdk_repo/spdk/test/unit/lib/nvme/nvme_cuse.c/nvme_cuse_ut.c:393
5 0x7fdac724c1a6 (/usr/lib64/libcunit.so.1+0x41a6)
6 0x7fdac724c528 (/usr/lib64/libcunit.so.1+0x4528)
7 0x7fdac724d456 in CU_run_all_tests (/usr/lib64/libcunit.so.1+0x5456)
8 0x415a4e in main /home/vagrant/spdk_repo/spdk/test/unit/lib/nvme/nvme_cuse.c/nvme_cuse_ut.c:415
9 0x7fdac62351e1 in __libc_start_main (/usr/lib64/libc.so.6+0x281e1)
10 0x403ddd in _start (/home/vagrant/spdk_repo/spdk/test/unit/lib/nvme/nvme_cuse.c/nvme_cuse_ut+0x403ddd)
The fix is to call fuse_session_destroy() only if the fuse session is != NULL.
Signed-off-by: Sylvain Didelot <sdidelot@ddn.com>
Change-Id: I41881243227d83e8d1e6b90e72c1b6d62ccd98d3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10225
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Its tools are needed for the LTO builds under clang.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I221069b2e74d71cfa811b226fb6a4c20598bef12
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10240
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We allocate from the head, so it's better to free to
the head too for better cache utilization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c32244f446bd7a1df12eefc81245b3ef7e24070
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We allocate tasks from the head, so it's better to
free them to the head too for better cache utilization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67c23e3d89cda16f94b1770eada5465015ddb6ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10192
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The NOTICELOGs really clutter the output during
application start - it's better to make these DEBUGLOGs
instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ae37d5d057d7b972017befbc0834de414b9710b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This limitation doesn't really take effect currently,
since the typical number of slots per channel isn't
bigger than MAX_COMPLETIONS_PER_POLL. But there's
no reason for this limit anymore - we should always
poll as many completions as we find.
It's better to remove this now, in case we have
configs in the future with higher number of slots
per channel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5d90d41e5142622b79d9765fbc62da1516e2b8be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10189
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3f1589880a00a0788fe5fbb2104789b3f81e1497
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10188
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Separate the admin passthrough case from bdev_nvme_io_complete_nvme_status()
into bdev_nvme_admin_passthru_complete_nvme_status() and from
bdev_nvme_io_complete() into bdev_nvme_admin_passthru_complete(),
respectively.
Then make the return type of bdev_nvme_admin_passthru() to void
by using bdev_nvme_admin_passthru_complete().
Besides, refactor bdev_nvme_admin_passthru() slightly.
These clean up make the following patches simpler.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I79b89ee1b6360aa6ac6fc3c03f0469be99b0c1f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9899
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
