Modify the spdk_poller_unregister() function so that it works correctly
when unregistering a poller from its own callback function.
Change-Id: I57fa5ebd8a8bad522e34f597b406a4726f1b76ad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was added after the previous SPDK_CU_ASSERT_FATAL change was
merged.
Change-Id: I9d26fcd78157b6c9b232ac1e7484d0939cc90612
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We already require the assert header from the C standard library,
so use that instead of RTE_VERIFY to further isolate DPDK
dependencies.
Change-Id: I4a718af858c88aff6080e33e6c3dd533c077b8f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Add some checks to hit paths not covered by the current tests.
Change-Id: If8e7977ab8327eacfa33657d0a167f3b935b0113
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some subsystems may wish to create unique I/O channels
which are not shared across all users of the same I/O
device on the same thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ade3675d57338cf85b6a301285e6f392bd6cd2e
Also remove libspdk_util.a from the io_channel_ut linker command, since
it already includes the tested C file directly and doesn't depend on any
other util library functions.
Change-Id: I4b3fc4d57b5af4524b53664365f6ba52686e4b80
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The test can't continue if a NULL pointer would be dereferenced.
Change-Id: If857057c69679de3be08c4605d15bc2b3892210a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If posix_memalign() fails, it may not have updated buf, so set it to
NULL explicitly.
Change-Id: I756bdc59ec1e31987ad3e6754eec4e2194b95074
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdev and copy modules no longer have check_io functions
now - all polling is done via pollers registered when
I/O channels are created.
Other default resources are also removed - for example,
a qpair is no longer allocated and assigned per bdev
exposed by the nvme driver - the qpairs are only allocated
via I/O channels. Similar principle also applies to the
aio driver.
ioat channels are no longer allocated and assigned to
lcores - they are dynamically allocated and assigned
to I/O channels when needed. If no ioat channel is
available for an I/O channel, the copy engine framework
will revert to using memcpy/memset instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99435a75fe792a2b91ab08f25962dfd407d6402f
With the I/O channel changes, this test needs to be rewritten
to be event-based. bdevio uses the spdk_bdev_do_work() function
to poll for completions, which is built on the check_io functions
that are going away when we move to using I/O channels.
Do not delete the code from the tree - just detach it from the
build and the test scripts for now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I88674988db6ccb3673faf7eb5b3e79b403059fa4
This patch adds a basic framework for creating I/O channels
for I/O devices. An spdk_io_channel represents a one-to-one
mapping between a calling thread (represented by spdk_thread)
and an I/O device that the thread will perform I/O operations
on.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I658ab7f995cc962f4e2a204e058cdd3ad3fd735d
Purpose: To make the function definition style consistent
Change-Id: I7ade943881aa5076fdd419958e386ae3c3661da6
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This matches the general order (LBA start then LBA count) for
the NVMe API.
While here, fix a copy/paste error in a debug message (write
instead of writev).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ice326af5d6025867dffed4d1f6c7b81fb9eba5eb
Rather than forcing the NVMe library user to pass a specially-allocated
block of memory (e.g. rte_malloc() in the case of the default
nvme_impl.h), just make the NVMe library allocate a suitable buffer
itself and copy to/from the user buffer as needed.
The fast path I/O functions still require special rte_malloc()
allocations, since we don't want to add an allocation and copy to the
I/O critical path.
Change-Id: I7fe88c0ba60c859a33bbe95b7713f423c6bf1ea8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Rename this function and make it more meaninful, since
we have spdk_nvmf_session_connect which is used to link a
connection to the session
2 split spdk_nvmf_session_destruct.
Change-Id: I150df7ccdf4de3428d8cecbb286d5f7944510a8c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The application is now entirely responsible for scheduling subsystem
pollers and sending events between threads.
Change-Id: I88da1f53b5e8852c7c4acd6f0a7a1e2219fbed41
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reason: In acceptor_poller_unregistered_event, we
directly call spdk_nvmf_check_pools and spdk_app_stop,
it will fail the memory check.
And function nvmf_delete_subsystem_poller_unreg will
not be called since we already call spdk_app_stop.
Change-Id: I3ffa30c87b149a66cee1d87d1bb81d4dc8cc96b9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The trace logs were useful during development, but now that the target
is working reliably, we can make the test output quieter and shorter by
turning them off.
Change-Id: I46cd2e22a3ccd69a5f94a1843b722f517223a343
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The translation code currently cheats a bit - it allocates a full 4KB
buffer for any DATA_IN command that is not a READ, and then the
different SCSI commands that fall into this category (INQUIRY,
READ_CAPACITY, MODE_SENSE, etc.) can write as much data as they
want without having to worry about a buffer overrun. Code higher
up the stack makes sure we only send the correct amount of data back
to the iSCSI initiator.
This patch fixes this behavior for standard INQUIRY (EVPD = 0).
Future patches will fix the behavior for other non-READ DATA_IN
commands, at which point we can remove the 4KB allocation and
only allocate the amount of data specified in the CDB.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If5e4a10eeba9851e2d91cab71228d2fc2d5baad0
Switch from the non-portable <sys/endian.h> functions (htobeXX/beXXtoh)
to the SPDK endian conversion functions.
Change-Id: Id49b87f2e536c68f0d5d567e78e1990c0a37ef14
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the NQN validation into the subsytem creation function, and fix the
allowed size to match the spec.
The spec is not clear about the allowed NQN size; for now, interpret it
as 223 bytes, including the null terminator (222 bytes of actual NQN
plus one terminator byte).
Change-Id: If9743ab2fe009d9d852e8b03317d9b38d8af18dc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be useful outside of the SCSI code, so put it in the common
string utility file.
Also reorder the parameters so they match the order used in strncpy().
Change-Id: I9e25a59b64e4bedf04e5a96de463b1d8aa0ddac3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Clean up the poller and only then free the associated subsystem's
memory. This prepares for future dynamic subsystem creation/deletion.
Change-Id: I9e56cbf8822814930fdbb662095c51b6ad40fbc4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Allow some time for the iscsiadm login command to finish before trying
to find the attached SCSI disk. This makes the reset test consistent
with other uses of iscsiadm.
Change-Id: I9521a41b51956643a437fcaccceefd256fb4b609
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
assert is part of the C standard library and is available
on any platform we'd consider porting to. Don't put a
wrapper around it.
Change-Id: I0acfdd6a8a269d6c37df38fb7ddf4f1227630223
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
pthreads are widely supported and are available on any
platform we currently foresee porting to. Use that API
instead of attempting to abstract it away to simplify
the code.
Change-Id: I822f9c10910020719e94cce6fca4e1600a2d9f2a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
pthreads are widely supported and are available on any
platform we currently foresee porting to. Use that API
instead of attempting to abstract it away to simplify
the code.
Change-Id: I28123d427ea8da07c6329b0233f0702f2d85c2a0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Comments are not allowed in the JSON RFC, but some JSON libraries accept
JavaScript-style comments.
Add a flag that enables non-spec-compliant comment parsing.
Change-Id: I9dfb66bb46ecff1a22d8af5a9c50620686a4707c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows live configuration of the target, much like
the iSCSI target. More function calls will be added
over time.
Also, make the tests wait until the target is listening
on the RPC port to determine that the target is ready.
Change-Id: I8f762e49511d482ef820f6b25a7d3ad9a8bb41f9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The user can now specify a maximum delay, in microseconds, that
defines the maximum amount of time a reactor will sleep for
between polling for new events. By default, the time is 0
which means the reactor will never sleep.
Change-Id: I94cddb69c832524878cad97b66673daa4bd5c721
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Add slightly better statistics to get a range of values instead of just
the average.
Change-Id: I159994dce38412755afdd8980030c407125957e9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure any partition tables or other random data on the disks is
cleaned up before running the tests, rather than trying to clean it up
on failure when the system is in a potentially bad state.
Change-Id: Ia2119485aee6a50243744328dff2314d7a72adad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This leaves more flexibility for future changes to the poller
representation without requiring API changes (after this one).
It also prevents the user from accidentally using poller fields in a
non-thread-safe way, since they can't be accessed directly anymore.
Change-Id: I7677d5b93668665d29ae39c5e0ba74333ad3f878
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Report the maximum admin queue size correctly.
Change-Id: I52cad654bf59806e0abb8d869c22973647056617
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We are already testing bdevperf in the previous 'verify' test, and the
I/O splitting is handled by the NVMe-specific tests, so shorten the bdev
tests somewhat by only doing the large I/O bdevperf test in the nightly
test run.
Change-Id: I33439be4553ea94127e2039069dd7f58162e5d0f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the long verify to nightly testing only, and make the other FIO
invocations shorter.
Change-Id: Ic09b88aa16ad2ce62113821ad0c66dbf44a5721e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a step towards enabling sharing SPDK NVMe
device access from multiple processes using DPDK's
multi-process framework.
Change-Id: I57d5eec158b42addc1036bd2583596471a467a95
Signed-off-by: GangCao <gang.cao@intel.com>
Similar to our NVMf target, this is an iSCSI target that
can interoperate with the Linux and Windows standard iSCSI
initiators.
Change-Id: I6961c5ef99f7b161c396330ed5b543ea29b0ca7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Allow pollers to be scheduled to be run periodically every N
microseconds instead of every iteration of the reactor loop.
Change-Id: Iaea3e98965d81044e6dc5ce5f406bcb7a455289e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Combine the necessary functionality with the main bdev file.
Change-Id: I96d796bc87ac2a8688cdf1fd3c16d2a7c8aef730
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We reported virtualized NVMe devices through NVMe over Fabric specification,
with 1.2.1 NVMe version. For direct mode, the NVMe device maybe has lower
version, such as 1.0, the identify namespace list can not support in those
devices, so we need to add helper function here to simulate such commands
from initiator.
Change-Id: I226f4f34bf61017f538d2dd80332f1d054a501f1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
No need to do read and writes plus verify - the verify is
a read itself.
Change-Id: I28d08717e49b1327b04490810f8e6069504173c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a much simpler approach and is only slightly
less efficient.
Change-Id: I909de376d576a74156c1be447e90e7dbc240f025
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These can be simplified and merged into the subsystem.
Remove the concept of mappings from subsystems and replace
it with a list of hosts and ports. The host is optional -
not specifying a host means any host can connect.
Change-Id: Ib3786acb40a34b7e10935af55f4b6756d40cc906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change the Port configuration file entries to a new format:
[Port1]
Listen <transport> <address>:<service>
Initially, this still only supports RDMA, but the new format will allow
specifying other transports once they are added.
Change-Id: Iadfd19b91db57b571064379368dbe77204ccecbb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMf target is being refactored to split the RDMA transport-specific
code into its own file. Once this is complete, we should be able to
plug in other transports and build the NVMf target without any RDMA
dependency if desired.
To enable this, change the CONFIG option to RDMA; it still controls
whether the whole NVMf target is built for now, but once the RDMA
dependency is actually made optional, we will be able to build the
generic NVMf target code without libibverbs installed.
Change-Id: I8cd90a9aaa85dcefcc9b0f8f2e7b6af21958b2a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This never really made sense, so replace it with a list of
subsystems.
Change-Id: Ie7a9400083c091ac7142d01c23948200f515bdf7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is just extra complication for no real benefit.
Change-Id: I528af98e799d0641e753390fe35ff561fa3d7d76
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a bit heavy handed, but really make sure all
activity has ceased.
Change-Id: Iaa1ce16fd9e059f9eaec6712226344d69075b243
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
There's no benefit of reloading the NIC drivers (unless the drivers
themselves are buggy), so save some time by skipping the rmmod of
drivers we are about to load.
Change-Id: I05c3fd06042a2e06333d0cac123d24e6cce65b23
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Only nvme-rdma should be loaded as part of the NVMf testing.
Change-Id: I232363bf0988ea9bd99a37df27c39cc8e9732ad5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
