Many of the internal controller initialization functions did not check
for allocation failure; add return codes and check them where
applicable.
Change-Id: Id1b33bb06fca84035369d8b7ecd4c36b8ba7134c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Prepare for qpair to be exposed as part of the public API.
Change-Id: Ia63e863e95554adceeade20c829f12fe346375d5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When multiple NVMe controllers are being initialized during
spdk_nvme_probe(), we can overlap the hardware resets of all controllers
to improve startup time.
Rewrite the initialization sequence as a polling function,
nvme_ctrlr_process_init(), that maintains a per-controller state machine
to determine which initialization step is underway. Each step also has
a timeout to ensure the process will terminate if the hardware is hung.
Currently, only the hardware reset (toggling of CC.EN and waiting for
CSTS.RDY) is done in parallel; the rest of initialization is done
sequentially in nvme_ctrlr_start() as before. These steps could also be
parallelized in a similar framework if measurements indicate that they
take a significant amount of time.
Change-Id: I02ce5863f1b5c13ad65ccd8be571085528d98bd5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This check was dead code, since both places that called
nvme_ctrlr_wait_for_ready() could only ever have cc.en = 1.
Remove the original nvme_ctrlr_wait_for_ready() wrapper and rename
_nvme_ctrlr_wait_for_ready() without the underscore to replace it.
Change-Id: I6c9aa6a5b93606fb89d168c23f6735fcf3a84eaa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
In nvme_ctrlr_hw_reset(), if we encounter a controller whose CC.EN bit
is already 0 (controller is disabled), the previous code would enable
the controller just so that it could be disabled to get a full reset
(transition from CC.EN = 1 to CC.EN = 0). However, it is a safe
assumption that if CC.EN is already 0, the controller has just been
reset, so we don't need to reset it again.
This saves a significant amount of time (2+ seconds per controller with
Intel SSD DC P3700) during initialization for devices that were disabled
on startup.
Change-Id: I552b1f0f185a84a8a0ce57a93b012d9d5fe096f3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
PCI_VENDOR_ID_INTEL -> SPDK_PCI_VID_INTEL
Also change the inclusion guard macro to be consistent with the other
SPDK headers.
Change-Id: I29346267172cb8c07cc4289eed4eca2d55e942d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename all functions with a spdk_ prefix, and provide enough of an API
to avoid apps needing to #include <pciaccess.h>.
The opaque type used in the public API for a PCI device is now
struct spdk_pci_device *.
Change-Id: I1e7a09bbc5328c624bec8cf5c8a69ab0ea8e8254
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds Intel NVMe device list and overrides the
supported log pages according to the quirk list.
In particular, the READ_CMD_LATENCY and WRITE_CMD_LATENCY pages are
supported on Intel DC P3x00 devices despite not being listed in the
Intel vendor-specific log page directory.
Change-Id: I3a2b6a5fa142c6e9c93567df65e85980bd3c7cc0
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Also add a space between Copyright and (c).
The copyright year can be determined using git metadata.
Also remove the duplicated "All rights reserved." - every instance of
this line already has a corresponding "All rights reserved" immediately
below it, except for examples/ioat/kperf/kmod/dma_perf.c, where I have
added it manually.
Performed using this command:
git ls-files | xargs sed -i -e 's/Copyright(c) \(.*\) Intel Corporation. All rights reserved./Copyright (c) Intel Corporation./'
Change-Id: I3779f404966800709024eb1eb66a50068af2716c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Add new API nvme_ctrlr_is_feature_supported().
2 Add unit test for new API.
Change-Id: Ia6d8710755c3b13984fca9d56700efe043be1402
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This cleans up the I/O splitting code somewhat.
It also moves the SGL payload function pointers up into the hot cache
section of struct nvme_request without pushing the other important
members past the cacheline boundary (because payload is now a union).
Change-Id: I14a5c24f579d57bb84d845147d03aa53bb4bb209
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change nvme_ctrlr_is_log_page_supported() to match
nvme_ctrlr_cmd_get_log_page().
Change-Id: I4c8a1f11044b083f8f8990ef40a4f789fa3c24e3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Add supported log pages data structure.
2 Bulid up supported log pages when NVME start.
3 Provide unified API for getting log pages.
3 Unit test suit optimization base on above modification.
Change-Id: I03cdb93f5c94e6897510d7f19bc7d9f4e70f9222
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
nvme_ctrlr_process_io_completions() and
nvme_ctrlr_process_admin_completions() now return the number of
completions processed.
This also adds the possibility of returning an error from the
process_*_completions functions (currently unused, but this at least
gets the API ready in case error conditions are added later).
Change-Id: I1b32ee4f2f3c1c474d646fa2d6b8b7bbb769785f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, if nvme_allocate_request() failed in
nvme_ctrlr_construct_and_submit_aer(), there was no error checking, so a
NULL pointer would be dereferenced.
Add a return value to nvme_ctrlr_construct_and_submit_aer() so we can
signal failure to the caller. This can only really be reasonably
handled during initialization; when resubmitting a completed AER later,
there is nowhere to report failure, so the AER will just remain
unsubmitted.
Change-Id: I413eb6c21be01cd9a61e67f62f2d0b7170eabaa3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_qpair_submit_tracker() and nvme_qpair_manual_complete_request() are
only used from within nvme_qpair.c, so they can be static.
nvme_qpair_submit_tracker() is moved up to avoid needing a declaration
(no other code change).
nvme_ctrlr_hw_reset() is only used from within nvme_ctrlr.c, so it can
be static.
Change-Id: I9a7953d7baaec76e875dd535daf557ea24bef801
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These delays are left over from early development. They are completely
unnecessary and not based on anything in the NVMe spec.
Startup time should be slightly improved (on the order of 100 ms in
normal cases).
Change-Id: I9068b1a0f42feabcfe656d68be91e05a56cc53a3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_process_io_completions() now takes a second parameter,
max_completions, to let the user limit the number of I/Os completed on
each poll.
If there are many I/Os waiting to be completed, the
nvme_ctrlr_process_io_completions() function could run for a long time
before returning control to the user, so the max_completions parameter
lets the user have more control of latency.
Change-Id: I3173059d94ec1cc5dbb636fc0ffd3dc09f3bfe4b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It was previously uint32_t because it was accessed with special
uint32_t-only atomic read/write helper functions, but that was replaced
with normal variable accesses protected by a mutex.
Change-Id: I304a7ef8c723cb33fd08110b697f848823a163e7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the only place that was using printf directly in the NVMe
library. Replace it with the official nvme_printf logging mechanism.
Change-Id: I689a7c0854b5e47eb357150f814e347cd44be79c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is calculated elsewhere now, so remove the comments around
nvme_qpair_construct calls.
Change-Id: I2dc4956a9e250b88e62038bc55cdd315940ad391
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
rc is reinitialized before it is ever read.
Change-Id: I9abbc256fb06022f3024b0aa3827be02a273f20a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
