Nbd package will enable tests that uses them.
Python2 is outdated. Python3 should be available.
Change-Id: I244c82b8ab2b8e4217dfb814f69882b2963fac70
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
CUnit provides a helper macro CU_ADD_TEST() that
simplifies usage of CU_add_test() function.
Test name no longer needs to be provided,
as it will be inherited from function name.
This is a follow up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/931
Change-Id: I8078f02e08b14f12328ae022d7090ba13fbd64e4
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch changes the way that unittests initialize.
The new way is shorter and simpler.
It assumes that error during initialization is a fatal error,
but in our cases it always is.
This patch is a followp up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/930
lvol_ut.c is the only test that skipped because
it runs same tests multiple times which is not allowed
by new method.
Change-Id: I0baf7ad09a35d5fca2dc4a03b4453c12c14f38a7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1238
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
service is a plain Bash wrapper which either executes systemctl or
rc sysvinit scripts directly, hence its exit status should follow
standard logic - 0 for success != 0 for failure.
Reverse the check to not complain about service failure when it
was actually successfully started.
Change-Id: I29dd22c884157182549ebcc2ab4097eb098d7d3b
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1603
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Recent improvements to blobstore code, allow proper
reporting whenever error occured.
Callback for blob_create, should not refer to the blob
pointer when the operation failed.
Defer checking spdk_blob_get_id(blob), til after checking
error code.
This has been encountered in "vhost_boot" test:
15:20:54 # /var/jenkins/workspace/vhost-autotest/spdk/scripts/rpc.py -s /home/sys_sgci/vhost_test/vhost/0/rpc.sock bdev_lvol_create -u d605539d-2186-486f-bc3e-745e33d37072 lvb0 20000
vhost: blobstore.c:5101: spdk_blob_get_id: Assertion `blob != NULL' failed.
https://ci.spdk.io/results/autotest-per-patch/builds/8135/archive/vhost-autotest/build.log
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id926576e10a72e0d50fb65105be07c8ae8e40096
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds more ways to back off when parts of
blob persist fails.
Otherwise the process would proceed as if nothing happened.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7cff73e1dc3066d0c822d1e3dac4bd35e27cd54a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1263
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After opening the blob for deletion, in _spdk_bs_delete_open_cpl(),
the blob is removed from list of blobs in blobstore.
This is to prevent future _spdk_blob_lookup()s from referencing
blob while it is deleted.
In usual blob deletion path, next step is proceeding with deletion
of the blob by reducing its size to 0 and syncing the blob.
Changes from this point forward are persisted.
Meanwhile in special case of deleting snapshot which has single clone
on it, before above occurs additional steps are performed.
Each of the blobs are opened and their attributes changed.
Failures on those steps are fully recoverable on any errors,
and in such case blob should be added back to the bs list of blobs.
Original code had condition on how many references there were
to blob being deleted, which is incorrect.
Any error on that path should clean up after itself (revert attributes
and close blobs) and re-add the blob.
This change is tested with blob_delete_snapshot_power_failure() UT,
by adding error path in persist - which triggers error in aforementioned
blob delete code path.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I926e7cbf3cb86170c69f31231399535859f290dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/985
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When creating snapshot, 'original' blob will end up being a thin provisioned clone.
Before that first thin_provisioned 'newblob' is created during this process.
If the first md sync for 'newblob' fails, it means that only valid references to
clusters are still only present in 'original' blob. The 'newblob' can be safely
cleaned up.
Unfortunetly 'newblob' inherited some of 'original' blob properties before sync.
Cluster maps were already swaped in current cleanup code. But during blob close
of 'newblob' - persist blob code expects clusters to be 0 only for thin_provisioned
blobs. If original blob was thick, then it triggers an assert within persist code.
This patch makes sure to set thin_provision to 'newblob', to align with its creation.
Added asserts to verify that clusters maps are 0's, which should be the case
as I/O to origblob is frozen.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5420617792aefe8a3ef4e5989b2056504cdd1850
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously the SPDK NVMe driver always set PSDT to 01b for hardware SGLs
which is aligned to the Linux NVMe driver, for this case the metadata length
is not required when filling the NVMe command fields. There is no alignment
nor granularity requirement for Data Blocks for PSDT 01b case. And if the
drive reported that it needs dword alignment with SGL, for this case, when
using spearate metadata, it needs a length parameter to fill the SGL descriptor.
Change-Id: I56ffaada775fe66de7637dae15b509ee9556e80a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1351
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When the drives report that SGL dword alignment is required in
Identify Controller data structure, when using separate metadata,
PSDT should only be set with 10b. The specification says: If PSDT
01b was used, Metadata Pointer (MPTR) contains an address of a
single contiguous physical buffer that is byte aligned.
For supporting this case, SPDK driver needs a metadata SGL entry,
so we can reserve one entry in the tracker data structure.
Change-Id: I2d86a58b0395c3000626f922e56d7f2212c8a752
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The specification says when PRACT is 1 and metadata size is 8, the
controller generates and appends protection information to the end
of the logical block data, this looks like only valid for extended
LBA format, but from real test with different drives, for separate
metadata case, some drives require host allocated buffer while some
not, for metadata bigger than 8 bytes cases, they all need host
buffer, so we allocate this buffer in host for all cases here.
Change-Id: I1aca8eb84e089ff5819a5f2680409c193847c40b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add FC listen address to target listeners table before attaching the
same to the subsystem listener list. Without this fix, subsystem allow
any listener provision which is very important to FC-NVMe is broken.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I06436c0a73e65cb5f7bb3280658fcf200b975989
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1443
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently SPDK rejects Connect command when subsystem is not active.
This change allows to queue Connect command and execute it when
the subsystem goes back to active state. To queue the command we
should know subsystem_poll_group, in current implementation
this poll_group is known only when controller is already created.
To get the poll_group for Connect command we can retrive subsystem
subnqn, find subsystem and get poll_group by subsystem->id.
Increment subsystem_poll_group->io_outstanding even for Connect
cmd in order to prevent subsystem change state during the
connection process. Update spdk_nvmf_request_complete -
decrement io_outstanding for Connect cmd.
Fixes#1256
Change-Id: I724abb911696d7234a9c9d27458eba24739b26fd
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1273
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This unittest uses CU_add_suite_with_setup_and_teardown()
which was added in CUnit 2.1-3 released over 5 years ago.
This is the most commonly packaged version of CUnit on
not EOL'd distributions.
Unfortunetly there is incorrectly created package on CentOS7.
CUnit-devel-2.1.3-8.el7.x86_64.rpm despite its name
contains CUnit 2.1-2.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5ebf9973b1f3df9ff6cc1f0dc61dcf691096605e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make sure that we can parse domain with 32 bit address.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I83ca08d5156c58b97e96b3884b5c6d6afcd1969a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We callocated the listener, but if we to execute the listening
behaviors which got failed, and all the other resources have been released,
only left listener.
Fixes issue #1326.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I020b509caed79e9880d07b01888ed389630ff67f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1595
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make opal_init_key() only do the key initialization.
Change-Id: Ie2eb76a1008ba66a0706b3f035c52dbd548fdfc8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use unpacked user and key parameters instead of packed
structure as the input parameter.
Change-Id: I1e7db5c9dd3f4055165d790105ec5d05961f8f92
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use the unpacked parameters instead of the packed
structure, this is more clear according to the function
definition.
Change-Id: I2de6cb456c2d40aea4408bbb1c7c6453b69cf290
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The input locking range and locking state parameters are enough,
so we don't need to pack them into a structure.
Change-Id: I6dc7074d2611c3974b1f0a80202cf5b7d73862aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unpack the opal_common_session structure in function opal_start_auth_session(),
this can help us to use only one active session structure in following patches.
Change-Id: Ic9c5f993303a923b46c79a479c2de9b143277d47
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The locking range variable has fixed 8 bytes of length, so we don't
need to check the length again in the build function.
Change-Id: Id8c667367c93de1aee829f2e190af516456ad8c9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1571
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No need to check the length parameter, inline it is more clear.
Change-Id: I2fa66ed731b20898311b6ade14b837191d366af7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1570
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Althrough the controller can only support 1 session, but we can refactor
the OPAL internal APIs running based on session, then we can allocate
a session from public APIs, currently we just use the session that
embedded in the global device structure.
No actual logic change from this patch.
Change-Id: Ifbc801970f3df6f0753a5796715667f2eaf664aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1520
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Althrough the drive reports that only one session and one comID are
supported, and it can only support synchronous method, but it should
allow users to send multiple security send/receive commands at the
same time. Looking back the implementation of existing library, it
works but not so good, here as the first step, we will not use the
global data buffer for security receive command when doing level 0
discovery.
Change-Id: Ib735129b7cb6b1fd98be5fc208fbe149f3971773
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also remove the unused ctx and a function declaration.
Change-Id: I2f76d5c4795a0bfa3c075a5be83a7be434df6a64
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Commit 8c1d107 added a new erase API and renamed the original
API with "secure_" prefix according to the specification, as the
secure one will not cryptographically erase user data, due to
the limitation from the drive, only the secure API can be
supported, so changing the caller to use the original again.
Change-Id: I25cb054e728065d9ae9c6c30aa0ab374d60cf6f6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use output_dir path provided by autotest_common.sh
to store all build artifacts in one place.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ie5d3bb4dcb3fc623b6719859ce25235e1aae6bcb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1135
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Coverage and ut_coverage files would get created in
spdk dir or in directory from which the autotest.sh was
called.
Use $output_dir provided by autotest_common.sh instead
to keep all build artifacts in common place.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iaf009182441933cb5e9bd137d0c94078272dd749
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1134
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
run_fio.py was initially added (as the name suggests)
to run fio workloads on VM guests in client-server
mode during vhost tests.
Over time some of it's functionality was moved to
test/vhost/common.sh, so at the moment this script just
creates a command string and starts it. Using separate
Python script is just an overkill.
run_fio.py also contained an option to measure
VMEXITS on the guest side, which is never run in tests.
If needed we can re-add it in other commits.
Change-Id: I87a4c824dc09220bb6ce709355ee2d65e0ce3540
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1460
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Update QAT link to latest version.
Previous version does not compile on kernels 5.5+ and gcc 9.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I115f6ead9ccc40a08774a1508b19a8ac7572845e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1476
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The statement in line 1199 is may not be correct:
Actually, it should be following two cases
to pendinging_recv into false;
1 posck->recv_pipe == NULL
2 psock->recv_pipe != NULL & avalable_bytes == 0;
So this patch can fix this issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie612f781b0848e1f0ab1b48dc8c45e39862b772a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some of the values were passed as literals rather than
values of variables.
Resulting in following errors:
08:34:32 # fio --name=fio_test --filename=/dev/nbd0 --offset=0 --size=lvol_size --rw=write --direct=1 --do_verify=1 --verify=pattern --verify_pattern=0xcc --verify_state_save=0
fio: failed parsing size=lvol_size
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If0cd104d83646c1e5c23029cdc27a18340982187
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The period was being treated as a wildcard by awk so it was improperly
parsing the libspdk_sock*.so library versions.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I37d3cfaf7bf9c29c6d5efb647e68d8a8be715a2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1513
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Run iscsicleanup once before running the tests. This is
to ensure we delete any stale entries or files if they
were not removed properly in previous test runs.
Fixes#1311
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Idb415adddfaa7cbb443377a292fae357c1707e79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Test in event.sh take 5 seconds on CI at this time.
For the tests to run both SPDK_RUN_FUNCTIONAL_TEST
and SPDK_TEST_EVENT had to be enabled.
This served as very minor time saver, so removing
this flag shouldn't affter test times more that the
5 seconds.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie3eaa587daf28b2efbc3cfdff5ad648b7529e7f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Building docs is tested in autobuild_test_suite
when SPDK_TEST_AUTOBUILD is enabled.
SPDK_BUILD_DOC can be safely removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic871febdcaba708e2fbe6a55d31ec3ddb101a818
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Building "--with-shared" is tested in autobuild_test_suite
when SPDK_TEST_AUTOBUILD is enabled.
SPDK_BUILD_SHARED_OBJECT can be safely removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I05b1d04c3e28ce72c0a4a6deb89d0b6d02e2bb67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This kind of changes are now done through out the UTs in SPDK.
Patch here just adds them here as well.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I66fc06bbea038e328ba27bdea58b6e6479eee122
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
lvs_load, lvols_load and lvol_open were already added to the suite.
Commit 2f22884 mistakenly added those three when adding lvol_refcnt.
To remove those UT actually fixes earlier in the series were required,
as incorrect errnos were checked before and this specific order of
UTs set the right errno between them.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7188be49171b6254146c6d144f9a54a689151b60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1486
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Simply some of the functions can be replaced with the stub
defines, so they were.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3095855c02c605fe0d66ee720a5025cdd8933873
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are three types of callbacks in lvol library:
- void(cb_arg,lvs,errno)
- void(cb_arg,lvol,errno)
- void(cb_arg,errno)
First two are used in cases where result of operation is
either lvs or lvol.
Last one is used for any operation that does not produce
either.
There is no need to keep more than one callback function
for last one, since they all are doing the same thing.
lvol_op_complete(), lvol_store_op_complete(), close_cb() and
destroy_cb() are now replaced with op_complete().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idd8fcf327ef56ad7d27e2e31cad9ddc44c80e5c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1484
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There were two variables (g_lvserrno and g_lvolerrno) to
assign and check after operations.
This caused issues when developer mistakenly created callback
that assigns one and then checks the other.
This UT is ran to completion each time and only single operation
is done at once. There is no need to account for both.
This patch removes g_lvolerrno.
Next one will simplify callbacks.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7d16b1913c13de56e1df2f5e36db11f15430979b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
