(Note: this patch was previously applied as b32cfc46 and then reverted
as 63642bef.)
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7739
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit b32cfc467b.
This commit fails the ABI checks and only got through because the checks
were disabled until 21.04 hit.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id26b8f8ba551193d99b1ccbd31b35378b4095a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7731
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When zcero copy send is enabled and used by initiator,
it could significantly increase latency in some payloads.
To enable more fine graing configuration of zero copy
send feature, add new parameters enable_zerocopy_send_server
and enable_zerocopy_send_client to spdk_sock_impl_opts to
enable/disable zcopy for specific type of sockets.
Exisiting enable_zerocopy_send parameter affects all types
of sockets.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I111c75608f8826980a56e210c076ab8ff16ddbdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7457
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Each fio thread can have multiple files that it writes to.
Which is why the per thread spdk_fio_setup() fio callback does
for_each_file() {...}.
One of these files can be e.g. a zoned namespace with append support,
another file could be a zoned namespace on another controller without
append support, and a third file could be a conventional namespace
(which never supports the zone append command).
Right now, we will return a fatal error if a thread has e.g. a zoned
namespace (with append support) together with a conventional namespace.
Instead of returning a fatal error, enable zone append only on the
namespaces that support zone append, and allow namespaces that do
not support zone append to continue as usual (using regular writes).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ic6456d408cbe91563acd337a4b70c6e871fe34c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7611
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Commit f69367c788 ("fio_nvme: defer qpair allocation to file_open
callback") moved the qpair allocation from spdk_fio_setup() to
spdk_fio_open(). This broke spdk_fio_report_zones(), which needs a
qpair in order to get the initial state of the zones.
setup_files() in FIO calls td->io_ops->setup() (spdk_fio_setup()),
followed by zbd_init_files(), which calls zbd_init_zone_info(),
which calls zbd_create_zone_info(), which calls parse_zone_info(),
which calls zbd_report_zones(), which calls td->io_ops->report_zones()
(spdk_fio_report_zones()).
i.e. spdk_fio_report_zones() will always be called directly after
spdk_fio_setup(). .report_zones() is even called before the per
thread ioengine .init() callback.
Therefore, spdk_fio_report_zones() is called before the ioengine
.open_file() callback.
This is done in order to ensure that all threads will share the same
zbd_info struct, which contains the per zone locks.
Since SPDK nvme ioengine no longer initializes the qpairs in .setup(),
create a temporary qpair in .report_zones().
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ic376ac7844e40fceff092900ae7e4714bccf38e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7590
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Commit f69367c788 ("fio_nvme: defer qpair allocation to file_open
callback") moved the qpair allocation from spdk_fio_setup() to
spdk_fio_open(). This broke --initial_zone_reset, which needs a qpair
in order to perform the initial zone reset.
While at it, move the initial zone reset from spdk_fio_setup() to
attach_cb(), as this is where all the other fio options are verified.
By placing it in attach_cb(), after the duplicated file check, we
avoid the need to loop through the whole fio_thread->fio_qpair list.
Since SPDK nvme ioengine no longer initializes the qpairs in .setup(),
create a temporary qpair, if the --initial_zone_reset option was used.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I7950304c58aef3ec783f7cd99cfb1e7d7817a197
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7589
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The RPC is for testing purposes, as such does not need to provide
documentation in SPDK proper.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia153ad326e4c2ac43b511f9c2fba4aa95f1e3295
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7607
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Plugin RPC method 'reactor_set_interrupt_mode' is added
to set specific reactor run in interrupt mode or back
to poll mode.
Based on this RPC, scenarios later can be implemented
to verify interrupt mode functionality.
Change-Id: I9785e6942299bab7c949780faf18216e293f0b1d
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
DPDK recently clarified some semantics on the rte_devargs 'data'
and 'args' fields. This actually breaks our use of the 'data'
field to store the 2 second timeout timestamp for delaying
attach to newly inserted devices. Investigating this further,
it does not seem our use of the 'data' field was valid - it just
happened to work until now.
We could use the 'args' field now. But knowing whether to use
'args' or 'data' would then be dependent on the DPDK version.
We cannot use RTE_VERSION_NUM to decide, because this is a
compile time decision, and it is possible in shared library
use cases that we could actually link and execute against a
different version of DPDK than we built against.
So instead we will create our own env_devargs structure that
will store these allowed_at timestamps. Currently it's just
a linked list (which is exactly how DPDK does it) - we could
make it more optimal with a hash table down the road, but this
code only executes when we are doing PCI enumeration so it is
not performance critical.
Fixes#1904.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ee5d65ba90635b5a96b97dd0f4ab72a093fe8f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7506
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
status code and type is inspected and reported
Fix issue #1893
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: I6f181d8c9464182b23c658f4c268b900398fd751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7567
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
All jobs are created at boot, meaning the setup callback
is invoked for all jobs before any are executed.
But it may be useful to put 'stonewall' parameters in
the job file to execute a bunch of workloads in succession,
starting one workload when the previous one completes.
But since qpairs are created currently during setup, the
total number of workloads that can be expressed is limited
since qpairs for all workloads are allocated up front.
So instead defer allocation of the io qpairs until the
file_open callback. These don't get called until the
job associated with the 'file' (in this case, the
nvme namespace) is ready to execute.
Note that we cannot free the qpairs in the file_close
callback, since fio may 'close' the file before all
I/O have been completed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3c60cf27c3660a3c94042c0de719f5bebdb9b417
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7481
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Perf tool allows to specify g_max_completions
parameter but it is not used.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ib46aaa949ddda1b0ba25c28849a402986a7a3d8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7373
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK app framework supports a CLI parameter to
specify IOVA mode, add support for this to perf
Change-Id: Id72755d02c63c443ae3bced1823fc547d9e4b050
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7372
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When perf tool parses CLI arguments, it saves
each argument to a global value. Later these
values are checked for non-zero and copied to
spdk_env_opts structure. It can be simplified
by saving parsed arguments directly to env_opts
structure. It is applicable to env options only,
options specific for perf are still copied to
global variables.
Change-Id: I298392348df959d8165ea72333764c6505373fc2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Some earlier NVMe drives don't implement Deallocate
Logical Block Feature(dlfeat) read value field, but
it can return zeroes in deallocated ranges, that's
the quirk NVME_QUIRK_READ_ZERO_AFTER_DEALLOCATE, so
here we use the API to cover earlier NVMe drives.
Change-Id: I6867618c60dd5488a5d4820d663da7f074af229c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7525
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Not only in accel_perf, but also in test event_perf.
Remove them.
Fixes#1895
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I2af1d9f6f077f3ae775af994567804633fc8f050
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7370
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When submit_io cb returns bad status, current
task is dropped and allocated memory is not cleaned.
Change-Id: Ibc33e76e6800644c29eaeb826a3401ad5d5fd582
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Function cleanup_ns_worker_ctx is only called for
ns_ctx which have outstanding IO, so when draining
phase is started and some context doesn't have
outstanding IO, it won't be cleaned properly.
To fix this problem, call cleanup_ns_worker_ctx for
every context when drining is finished.
Fixes issue #1880
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I3ce4716ed6ac1369b6f72b03cbcfd7d407f7de55
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7282
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Check if qpair has a poll group during the connect process,
use poll group's statistics or allocate own structure per
qpair. That is done due to not all applications use poll
groups and we want to avoid "if (qpair->group)"
conditions in data path.
Admin qpair always allocates its own statistics
structure but the statistics are not reported
since this qpair is not attached to a poll group.
Statistics are reported by spdk_nvme_perf tool
if --transport-stats and in bdev_nvme_transport_statistics
RPC method.
Change-Id: I58765be161491fe394968ea65ea22db1478b219a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6304
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Statistics are dumped in the end of perf tool work,
enabled using long option --transport-stats
Change-Id: Ice3755ba82ebcdacfa72ceb9b3d5a1caee911811
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6302
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
I was trying to find a free character to add
statistics reporting and didn't fine a suitable
one. Since perf provides a lot of short options,
let's change it to also use long options.
Change-Id: I2a7fd5619e996a40b2d432017992d5f888abb656
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6301
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
This option may have been valid at one point, but is
not any longer. So remove it from the usage text.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I83747968085a77fb52d735026294bf5f82517ffc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Optargs are missed about -G and -T
which are used to trace and debug.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I3624b80f52c1b603acf1bc96126b73d1042f1b34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7109
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
spdk_nvme_zns_report_zones() is implemented using
nvme_allocate_request_user_copy(), which under the hood will do
a spdk_zmalloc() with the SPDK_MALLOC_DMA flag set, and will copy
over the result to our buffer.
Therefore, it is redundant for us to use spdk_dma_zmalloc(),
because it will cause us to allocate twice the amount of memory
from the precious DMA pool than needed.
Changing this zone report buffer allocation to a calloc also
has the benefit of making the code uniform with all other
spdk_nvme_zns_report_zones() call sites in the SPDK codebase.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia354fa51c66ae07a38a9a57b07c15d145dd609f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7005
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When support for printing the zone report was added,
the zone report buffer was allocated using calloc().
This was intentionally changed to a malloc in commit
5ef79a17ec ("examples/nvme/identify: add an option to dump
the full zns zone report").
While we shouldn't need to zero the buffer, since the drive
should write the "Number of Zones" field in zone report header,
and we should never read zone descriptors beyond this value,
the ZNS spec also states that reading beyond the last zone
descriptor has undefined results.
Considering that "Number of Zones" field in the zone report
header will only represent the number of zone descriptors
in the buffer when the partial bit was set to true,
always use calloc(), to avoid the chance that someone might
copy this code and call spdk_nvme_zns_report_zones() with the
partial bit set to false.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia39c5235aa5c62a4ec42285f53f4bc80f7ec370f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7004
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the bdev is a zoned bdev, reset zone 0 (containing offset 0),
before doing the "Hello world!" write to offset 0.
This is done to ensure that the write pointer for the first zone
is at offset 0.
If we don't do a zone reset before doing the write, the write
would fail if there already were data written to the first zone.
(E.g. if the user ran the hello_bdev example twice.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I52b6fc9cf6e86fef9aeb19482eafd1f857ba1478
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6943
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If PRACT is enabled, and metadata size is 8 bytes, for extended
LBA format, the controller will insert/strip the metadata, so
we don't need to pass the metadata buffer, so we should exclude
this metadata buffer from host buffer.
So here add a function to calculate host buffer size.
Change-Id: I42d8d9cbfbf7ba2bc4bf64d65260c6cfe9bd4cb1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6789
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: To setup an accelerated function callback
for created spdk_nvme_poll_group. In this patch,
we just create the interface. The real usage of this
call back will be provided in the other patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I0d936aa4eba4dbfcc0137942156b9f2919eb5b78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6758
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For each active namespace, print the command set identifier.
This will work on namespaces that do not support or report a namespace
type, as spdk_nvme_ns_get_csi() will return SPDK_NVME_CSI_NVM for such
cases.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I05fa7fd6bb3d9ea32dac236c98baef90347094ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6905
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_module.h should only be included when implementing a bdev module.
hello_bdev.c is not a bdev module implementation and therefore should
not include the bdev_module.h header.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I6a8b9989b21311ae8526b13d7a58603b68a433cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6904
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is an internal API used in several places. The call can fail, so
make sure it can report that correctly.
Change-Id: Iac0ed2c8299c9dd3d2556070278a2224c3807b7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the test run is aborted early (i.e. Ctrl-C), we
should use the elapsed time as the divisor instead
of the originally specified time.
Fixes issue #1800.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3312cc83f3422ec46ad584e3ee2b40f3ad9ec6f5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6474
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
This patch added the chained crc32 support API for both batched
and non batched mode usage. And also update the accel_perf
program in order to use the revised accelerated crc32 function.
For example, you can use the following command:
./build/examples/accel_perf -C 4 -q 128 -o 4096 -t 5 -w crc32c -y
In this command, "-C 4" means that caculate the chained
crc32 for an iov array.
(even if you do not have the accelerated DSA hardware)
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ifede26f9040980b5791da8e5afef41177eede9f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch provides two new accelerated crc32c function interface.
And the next patch will be used to add the real support of chained crc32c feature.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3f8dd55c3da636e29e5fb02fc229b51f05653cd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6456
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Case 'h' or 'H' should return 0, this is a normal return.
Change-Id: I33888fdd8f293b5a297a629a80cf925917b32df8
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6062
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a workaround for issue #1799 that would require
a fix from Google Cloud Platform. GCP NVMe SSDs do
not support overlapped GET_FEATURE commands - the
cdw0 value on completions get mixed up.
On GCP the result is that identify app reports only
1 SQ/CQ supported when in fact it supports 16.
We can easily workaround this in the identify app by
submitting one GET_FEATURE and then polling for its
completion before submitting the next one.
We may consider reverting this in the future should GCP
provide a fix, but there is really no harm in keeping
this patch long term since this isn't an I/O path issue.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I536033677a8364c955d562226e3feba4dbad0e07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
print_qid_mappings=1 will now add logging messages
showing the {filename,qid} tuples associated with
each job.
Note that for the nvme plugin, the filename is
essentially the transport ID. We just print that
filename for simplicity rather than reconstructing
a transport ID string from the ctrlr object.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9b714ac009fd16b96ed87c2c056be251009815b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6396
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For use by test scripts to know when there was a non-fatal error.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I1c5e37edb13570aec1e186fe534ed6780a6de0c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Useful for DSA, for example, where we might need more than one
thread hitting a single DSA device at a time. Previously you'd
have to do this by using multiple cores.
Note: the -n option was removed and replaced with -T, it was
a carry over from the ioat perf tool that this was modeled after.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I44840655dc297cdc3116ca7b67718444b0800ab3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6333
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Now when we have support for spdk_nvme_zns_zone_append() and
spdk_nvme_zns_zone_appendv(), hook them up in the nvme fio plugin.
Note that fio itself does not have support for zone append,
since unlike SPDK, there is no user facing zone append API in
Linux. Therefore, this new option simply replaces writes with
zone appends in the SPDK fio backend.
This is however still useful for the following reasons:
-Provides a way to test zone append in SPDK.
-By using zone append, we can test with iodepth > 1.
With regular writes, the user can only specify iodepth=1.
This is because for zone namespaces, writes have to target
the write pointer. Having more than one write in flight, per
zone, will lead to I/O errors.
In Linux, it is possible to use fio with iodepth > 1
on zoned namespaces, simply because of the mq-deadline
scheduler, which throttles writes such that there is only
one write in flight, per zone, even if user space has
queued up more.
Since a user might not want to use zone append unconditionally,
even on a namespace that supports it, make this an option
rather than enabling it unconditionally.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I028b79f6445bc63b68c97d1370c6f8139779666d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6330
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use the new function spdk_nvme_zns_ns_get_zone_size_sectors() where
it is appropriate (in comparison to the existing
spdk_nvme_zns_ns_get_zone_size() variant).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ic929ffbc5a1f4a16ba6719a985c05ae625caed46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6417
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add an optional limit, -z N, to the zone report dump option -z.
The variable g_zone_report_limit replaces the MAX_ZONE_DESC_ENTRIES such
that the maximum-number of zone-descriptors is overwritable. It also
replaces g_zone_report_full as it is represented by the limit-value 0,
e.g. "no limit" dump the full report.
The print of the section-header now includes the total amount of zones
and the limit. With this information, the header's width varies. A
helper-function, print_uline(), for printing an "underline" using a
given marker, is also added.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: Ic8abead693ed83bb8612eef1f35605098ccade84
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6036
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Despite spdk_nvme_transport_id_parse() checking optarg for NULL, then
the Jenkins CI doing code-analysis fails with the error message:
"Null pointer passed as an argument to a 'nonnull' parameter"
This adds an assertion to satisfy the code-analysis.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I35f7ee659624c1d5a2abda91bccac9fb58393063
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6068
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Identify application prints the PMR details if it is supported
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: Iaba4c15e18e1402035b11a34b2defe8078855751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6209
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As reactors no longer have a thread created with them.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie9e9411c52c215b8cffd894fef6394448ae8167d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6312
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
