If ANA state is inaccessible or qpair is disconnected, I/O cannot
be submitted.
But if qpair is connected, ANA state may become accessible, or if
qpair is disconnected, it may become connected via resetting.
Hence even if find_io_path() returned NULL, queue I/O and retry it
one second later if qpair is connected or ctrlr is resetting.
Sort retried I/Os by expiration values in ticks, and activate a timed
poller per nvme_bdev_channel only if there is any retried I/O. So
the poller function bdev_nvme_retry_ios() always returns BUSY because
if the poller runs earlier than the closest retried I/O or runs when
there is no retried I/O, it is more like a bug of the framework.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id28110a0d63ebc1c5772814e2ff8a47934df1644
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9830
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- remove metadata updater
- handle 'zero' flag in mempool allocator
- adapt ocf_mngt_cache_start() to new OCF API
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: I34afd856cc1306ffe305f71a445e7474c9b0a2d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
OCF requires separate mempool for each request size from rage 4k-128k. Mempools
are meant for both IO and OCF's internal requests.
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: I3b37d287bbd6f963a24007c8485002f414fb8a7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adds context to currently existing traces inside bdev.c file.
These are going to be used later to match with traces from
nvmf layer to enable io tracing.
Change-Id: I599a60412f39144cdd306315a184b2000a61286e
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9497
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
This is to help with binding trace objects together and
for the convenience (all trace definitions are in one place
instad of being scattered accross multiple files).
Change-Id: Ib15bc9c2eeee9c4d0816bcee509ab69f3f558e19
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9574
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Add tcp events changed in previous patch to the trace.py for
enhanced event information.
Change-Id: I8f176905a8283ba1b588d95bdbc075c38677acbe
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9307
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Enable tracing of tcp qpairs in lib/nvmf/tcp.c.
Change-Id: I692e74a972dcddd0bff193f1703470926e28b4db
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9288
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
This change aims to help with tracepoint handling in the future.
Instead of printing each trace directly with given values, we
will use this function to pass status change value.
Change-Id: Icc7f2863703899f818f0a2d5f49b69aa4e26a62c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9690
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Changed the way a line is formatted to avoid unnecessary operations.
This slightly (~5-10%) decreases the runtime when the script is executed
on large trace files.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5549462d56f866bea99609f746aa53890b98d622
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
The stack trace is no longer printed if a user presses <C-c> while the
script is running or pipes its output to tools such as head or less.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0951c38d914986b5c9bf2ee98bcd046f0e957ff0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9441
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
It makes it more convinient for a user to start the script, as it's no
longer necessary to update the library path manually.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0dbeb54cad2585a50162c91f48c5ef199fa133b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Added trace provider based on the trace library. It uses ctypes to
define the trace objects and execute library calls. It significantly
(~2x) speeds up the execution time on large trace files.
The script automatically detects the type of the trace file and will use
the appropriate engine (either JSON or the trace library) using
python-magic for file detection. When piping a file through stdin, JSON
format will be assumed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icfa216edee4662714266968eeb72f0097b3779b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9439
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new name suits better to the following "data push"
operation
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ic3249f65de203f375477f8e87b0749b9502d165c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9878
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iovs are not needed in the callback
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I29718f1f2e65881628b72dea938e40c60348b85d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9877
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For GET/SET FEATURES command, some feature IDs will have data buffer
while some don't have, so here we will return the buffer length base
on the feature ID. The length is defined by the specification.
Change-Id: Ie9798585fc74544b77998aeebc2a20614c1c25f0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf7f978d7083afdc729959328d985a660111e371
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3801a339fa712b9ba41a9e9251e36a57c35239b7
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9873
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It is a bit confusing for the variable names to not match
the parameter names for spdk_bdev_io_get_nvme_fused_status().
These changes should make it a bit simpler to understand.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I833bf2a75cfec7b86da2d8a234f800de3510c2b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9867
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If NN is very large this saves a lot of memory. This lookup is
not generally used in the I/O path anyway.
Change-Id: I98e190006843ad5d0bac8483bf9feb800d4a665a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9884
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the SPDK NVMe driver, spdk_nvme_ctrlr_reset_async() sets
ctrlr->is_failed to false and spdk_nvme_ctrlr_reset_poll_async() sets
ctrlr->is_failed to true if it fails.
On the other hand, in the unit test for the NVMe bdev module,
the stub for spdk_nvme_ctrlr_reset_async() does nothing and
the stub for spdk_nvme_ctrlr_reset_poll_async() sets ctrlr->is_failed
to false if it succeeds.
This bug made us very difficult to write unit test for I/O retry.
Hence fix this bug.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic0dcf1109ce543a53fca74708fc86c8c74a17692
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9829
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_find_io_path() selects an io_path whose qpair is connected
and ANA state is optimized or non-optimized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I79c978795562b606ee27aa43020684d8bcbf50c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9405
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reset all controllers of a bdev controller sequentially. When resetting
a controller is completed, check if there is next controller, and
start resetting the controller.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I169a84b931c6b03b36bb971d73d5a05caabf8e65
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7274
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously the NVMe bdev module had completed the outstanding reset and
then canceled pending resets. This was complex.
On the other hand, the generic bdev layer cancels pending resets
and then completes the outstanding reset.
Following the generic bdev layer simplifies the code and makes us easier
to control retry reset, delay retry reset by a few seconds, or stop retry
after repeated failures and then delete ctrlr.
Update unit tests accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9a68422918ebcb052b3a281316ffba9b3450ecd4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9816
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
At least on my system, I need an extra escape for
the opening brace in the generated enums.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2f1d55f817bc10b3b1084d8280f330cdbd50edf6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9671
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
bpftrace scripts do not allow struct definitions after
the first probe definition (including BEGIN/END).
This is problematic for an upcoming patch which will
include some struct defintions.
So instead just add the generated BEGIN/END probes
with enum definitions to the end of the user-specified
script, instead of the beginning.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7bc8c18c0891ee26edc099aef96ea18ed63ccb72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9670
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Now a test thread will have one idle_poller and an optional
busy poller (when active_percent > 0).
The idle poller will just consume a very small amount of
tsc via spdk_delay_us(10).
If active_percent > 0, we will start a timed poller for
TIMESLICE_US (currently 100 * 1000). When that timer
expires, it will consume TIMESLICE_US * active_percent
microseconds.
I think this is a slightly simpler way to enforce the
thread consumption percentages specified by the tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I13dd18dacff0f6a86c045876384a8931b7273842
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9654
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Otherwise compiler complains that this variable
is used uninitialized (scsi_dev_find_free_lun does
reference it).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8fce604f22e06f7007669510f8ba0ae27c44261a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9868
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There are two resources to construct.
One is the job configuration and the other is the job.
This patch is to properly rename the related functions.
Change-Id: Ie005ed75a558b3176b183f30ef5bfdb9bef30dc2
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9854
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibcc7a77d1ebcc013b5050564fcc31b23b1202912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Additionally:
In release 1.0 intel-ipsec-mb module moved main header
(intel-ipsec-mb.h) from main directory of the project
to the /lib directory. This change aims to address that
and allow for a successful build.
Change-Id: Idd6ec90396166c94ca492ef1d2038331adbbc36c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Add the paired spdk_json_write_named_uint8|16 function
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ib7ee9ae4dbe9a4e9cfa28750f0b9a0af597d260c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9788
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As of recently, devstack requirements are broken - the suds-jurko
requirement doesn't work with a particular version of setuptools
needed by the latest devstack. Since this breaks installation on
ALL distros take a step back and use specific, stable branch
for the requirements: xena is the upcoming release hence it should
be as close as possible to master.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I1133cd64413ec4fb794fac932bd3ffe6ac81dd9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is needed for the older kernel builds which include the following
change:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7240b60c98d6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I8ac86885028d663b776ae8de6d9fb500ed997523
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9808
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
There is an build error on arm64:
nvme_compliance.c:203:42: error: comparison is always true due to
limited range of data type [-Werror=type-limits]
while ((op = getopt(argc, argv, "gr:")) != -1) {
For "op" is defined as "char" here. "char" is "unsigned char" on arm
and "signed char" on x86 by default. So change its type to "int"
to avoid this error.
Change-Id: I1f9fa8e0112538e005e8b88c1bfda9257b3f517e
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9853
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Allow user to add something like:
log_flags=nvme,nvme_vfio
to their fio config file to enable log flags. On
DEBUG builds, setting at least one flag will also
set the print_level to DEBUG.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7a409445d23c96845bc7afa9641966a964b7f44f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9871
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow user to add something like:
log_flags=app_config,nvme,bdev
to their fio config file to enable log flags. On
DEBUG builds, setting at least one log flag will
also set the print_level to DEBUG.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I383512e47ad6ea86b8b2c71a212bdc88fadf2f65
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previous patches (5363eb3c) tried to work around the
32-bit unmap and write_zeroes LBA counts by breaking
up larger operations into smaller chunks of max size
UINT32_MAX lba chunks.
But some SSDs may just ignore unmap operations that
are not aligned to full physical block boundaries -
and a UINT32_MAX lba unmap on a 512B logical /
4KiB physical SSD would not be aligned. If the SSD
decided to ignore the unmap/deallocate (which it is
allowed to do according to NVMe spec), we could end
up with not unmapping *any* blocks. Probably SSDs
should always be trying hard to unmap as many
blocks as possible, but let's not try to depend on
that in blobstore.
So one option would be to break them into chunks
close to UINT32_MAX which are still aligned to
4KiB boundaries. But the better fix is to just
change the unmap and write_zeroes APIs to take
64-bit arguments, and then we can avoid the
chunking altogether.
Fixes issue #2190.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23998e493a764d466927c3520c7a8c7f943000a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9737
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Restore the previous nice idea and unify canceling pending resets
into bdev_nvme_complete_pending_resets().
cb_arg of spdk_for_each_channel() was reserved for a different
purpose but it was gone.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c01051ae9d8eccc7fc3ec485dd344ff9f55087b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9815
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The all setters of the reset_cb_fn use boolean as the result eventually.
Using boolean as the result earlier makes the code simpler and the
following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9ec4f670ed7a000a824ab7e261bab07a3dc21f43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9814
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_admin_passthru() chooses the first ctrlr which is not failed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If41a1d1e1bde4bddfa92e5a385509daa3f0ce4de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9525
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_nvme_admin_passthrough(), bdev_nvme_reset_io(), and
bdev_nvme_abort() do not use io_path. So simply fall through even
if the optimal io_path is not found for these, and clear the
cached io_path for these.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib26fcbf99c95bbfb6e825c1b7c6455241c198d92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9675
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Even if the NVMe bdev module supports I/O retry, it will not retry reset or abort.
For clarification, bdev_nvme_reset_io() and bdev_nvme_abort() call
bdev_nvme_io_complete() themselves for error cases.
For bdev_nvme_abort(), we do not need to differentiate error processing
among return values. Simply complete the request with failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5d51cbba47c6360a6177efd7d5f2e978c48ee9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9674
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Even when I/O retry is supported, reset will not be retried. However,
bdev_nvme_io_complete() will process I/O retry. Hence inline
bdev_nvme_io_complete() into bdev_nvme_reset_io_complete() to exclude
reset from I/O retry. The result of reset is success or failure, so omit
the -ENOMEM case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I667e74cbbac4a13cefb6896f898476ba48bcd0fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9687
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Save the io_path to which the current I/O is submitted into struct
nvme_bdev_io to know which io_path caused I/O error, or to reuse it
to avoid repeated traversal.
Besides, add a simple helper function nvme_io_path_is_available() to
check if the io_path can be reused.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idadd3a3188d9b333b335ea79e20a244aa0ce0bdd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9296
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We have io_path structure now and returning io_path rather than
ns and qpair match the function name. The following patches will
cache the returned io_path into nvme_bdev_io.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5d773da18591fc324667f6b5c489a38f497bf3d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9295
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
