Here "return rc == -EINPROGRESS ? 0 : rc;"
They are the same meaning in these two functions.
Keep the comments here. This makes more clear to readers.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I8590de3f0fe27337163ee8b02ea63e166f1bbe7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5689
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As log shows
00:06:32.300 [2020-12-18 21:13:35.511014] nvme_ctrlr.c:1414:spdk_nvme_ctrlr_reset: *ERROR*: Controller reinitialization failed.
00:06:32.300 [2020-12-18 21:13:35.511104] nvme_ctrlr.c: 925:nvme_ctrlr_fail: *ERROR*: ctrlr 192.168.100.8 in failed state.
00:06:32.300 [2020-12-18 21:13:35.511132] bdev_nvme.c: 392:_bdev_nvme_reset_complete: *ERROR*: Resetting controller failed.
00:06:32.300 [2020-12-18 21:13:35.511240] nvme_ctrlr.c: 925:nvme_ctrlr_fail: *ERROR*: ctrlr 192.168.100.8 in failed state.
00:06:32.300 [2020-12-18 21:13:35.511511] bdev_nvme.c: 556:bdev_nvme_failover: *NOTICE*: Unable to perform reset, already in progress.
if spdk_nvme_ctrlr_reset() failed, nvme_ctrlr_fail() is called, and
then if spdk_nvme_ctrlr_process_admin_completions() failed,
nvme_ctrlr_fail() is called.
We don't know which one comes first but nvme_ctrlr_fail() should do
nothing if the ctrlr is already failed.
Hence we should avoid setting ctrlr->is_failed and calling
nvme_transport_ctrlr_disconnect_qpair() twice.
However we should set ctrlr->is_removed if the parameter hot_remove is true.
We do these changes in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac37c892e054fb59d78e69346ca7f0575d596235
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5694
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In some extreme use cases, an SPDK process could get
swapped out for a long period of time just after
we checked the state but before we called spdk_get_ticks().
So now we will only timeout if the timer expired before
we checked the state *and* the state did not advance.
It's possible we could just move the timeout check
to before the ctrlr->state switch, but I was
hesitant to change the flow for this case.
Fixes issue #1720.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I95b1db3365b5d2d8a65e528f53c302a724d44460
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5596
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When a device is removed, we should use the remove_cb
that was specified when the device was originally probed
and attached, if one was set.
Also add a new spdk_nvme_ctrlr_set_remove_cb API. This
can be used for cases where a different remove_ctx is
desired than was specified for the probe call. This
also enables setting a remove_cb when using connect APIs
which do not have a way currently to provide a remove_cb.
This also requires fixing the bdev nvme module, which
was depending on the previously errant behavior.
Fixes issue #1715.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id848b39040099ff7a21fe57ea6b194a8c25ae015
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5510
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_vtophys() already checks that, so we don't need
to check it in the NVMe driver again.
Change-Id: I74288ae8cab80e1be34583475fa02a3ae13e090c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5166
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a few references to %ld to remove the assumption
about the size of a long. Similarly, use %z with size_t arguments.
Where the value being printed is an unsigned 64-bit value, use PRIu64
instead of %ld.
Explicitly test for not __linux__ where that is the intent, rather
than testing for __FreeBSD__.
Cast pointer to uintptr_t before aligning it, rather than using
a specific integer size which may not be large enough to store a
pointer.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Icfe219e1bbb2d06b3ef05710fac5b7091d340251
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5142
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The zone append command, which is part of the Zoned Namespace Command Set,
has a maximum data transfer size that can be less than or equal to mdts.
Since zone append commands will not be allowed to be split, the user has
to be able to get the maximum zone append data transfer size. Add a
function that returns this limit.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9da2672ea8a307ff62251c069a42f7540765e08b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5140
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Zone append is an optional command in the Zoned Namespace Command Set.
Add a convenience function to check if the controller supports the zone
append command.
The ratified NVMe TP 4056 added a CSI field (in cdw14) to the Get Log Page
command. However, since there already exist two public functions to get a
log page (spdk_nvme_ctrlr_cmd_get_log_page() and
spdk_nvme_ctrlr_cmd_get_log_page_ext()), avoid creating a third one for
now, since nvme_ctrlr_get_zns_cmd_and_effects_log() itself can leverage
one of the existing public functions.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I99516dbac8db6714488b4d6cabe64c27f46d6153
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5078
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Remove superfluous parentheses around ctrlr->cdata.mdts.
They provide no value while making the code harder to read.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I4342d87f0e33fd92fe76357eb0379fb1e9c8f98f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5138
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
While I assume that the initial thought of having the
NVME_CTRLR_STATE_WAIT_FOR_* state directly after the state which it is
waiting for, was to make it clear for the reader in which order the
states will be executed.
However, it feels silly to have the same code copy pasted everywhere.
Someone who needs to add a new state will still need to edit
nvme_ctrlr_state_string() and enum nvme_ctrlr_state, which still defines
the NVME_CTRLR_STATE_WAIT_FOR_* state directly after the state which it
is waiting for.
In one way, moving the NVME_CTRLR_STATE_WAIT_FOR_* states to the end of
nvme_ctrlr_process_init(), when reading nvme_ctrlr_process_init(), it is
actually easier to see the ordering of the states which actually do
something of significance.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia95ea5ac3c44a53179edbdc65cba45bec94e469f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5115
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Move the lock files from '/tmp' to '/var/tmp' cause user maybe delete files in /tmp
or remount /tmp by mistake, And the JSON-RPC domain socket located in '/var/tmp' also.
Signed-off-by: Weifeng Su <suweifeng1@huawei.com>
Signed-off-by: Shihao Sun <sunshihao@huawei.com>
Change-Id: I18d52f42462e8477fb35aeea9e38efc51610d17c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5096
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add handler for 'strstr, strrchr' function in 'NULL' return
that maybe cause memory access issue.
Signed-off-by: Weifeng Su <suweifeng1@huawei.com>
Signed-off-by: Shihao Sun <sunshihao@huawei.com>
Change-Id: I2525fbcd9f8ce0a78383305c735b2d27575f4bfe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5071
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Section 7.9 of the NVMe spec says that all nqns must
start with "nqn.".
Fixes issue #1669.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7fd0e6a0a397e831c4fa2377126b6b1e1b127d88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5017
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is a problem with TCP zcopy enabled:
1. TCP initiator sends icreq and start polling a qpair. Polling of qpair
actively calls nvme_tcp_read_pdu function
2. nvme_tcp_read_pdu: qpair is in NVME_TCP_PDU_RECV_STATE_AWAIT_PDU_CH state,
it reads 8 bytes of common PDU header. It determines the type of the PDU
and finds the size of PDU_PSH header.
3. nvme_tcp_read_pdu: qpair is in NVME_TCP_PDU_RECV_STATE_AWAIT_PDU_PSH state.
It should read 120 bytes of icresp PDU. The number of bytes which needs to be
read is pdu->psh_len - pdu->psh_valid_bytes. qpair receives 120 bytes
(the full PDU) and calls nvme_tcp_pdu_psh_handle -> nvme_tcp_icresp_handle.
Here we check that we haven't yet received buffer reclaim notification and
simply return from this function. At the same time we continue to poll the qpair.
4. nvme_tcp_read_pdu: qpair is in NVME_TCP_PDU_RECV_STATE_AWAIT_PDU_PSH state
and tries to read data from a socket again. The number of bytes is
pdu->psh_len - pdu->psh_valid_bytes. But now pdu->psh_len == pdu->psh_valid_bytes,
so we call nvme_tcp_read_data with zero length.
readv with zero length is commonly used to check errors on the socket,
but in our case there is no errors and readv returns 0.
5. nvme_tcp_read_data treats zero as error and return NVME_TCP_CONNECTION_FATAL.
Fix is to handle icresp, but leave qpair in INITIALIZING state until
we receive acknowledgement for icreqsend_ack. We also move qpair to
NVME_TCP_PDU_RECV_STATE_AWAIT_PDU_READY recv_state so recv_pdu
will be zerofied and qpair will try to read a common PDU header.
But since it is not initialized yet, it won't receive anything
from the target.
Fixes issue #1633
Change-Id: I22cedefe530a8ac3b51495988ed6265d8fad15bb
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4969
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This fixes#1423 where the completion loop never
breaks when the NVMe ctrlr is no longer present.
This condition can happen during a hot remove.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: Ia238c8aeae720832068de28ce4d34a9d233344fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4831
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is possible that a single probe_ctx could be used
to probe multiple newly attached nvme controllers. If
one of those controllers is removed during this process,
the rest of the controllers do not get probed and can
even get stuck in a zombie state.
It is better to just continue with probing the rest of
the controllers.
Fixes issue #1611.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4156ee8b50e8d52cfeee7224f210a58bb773e939
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4945
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
According to the SPEC we should support up to 8192 bytes
of ICD for admin and fabric commands. Transport configuration
parameter in_capsule_data_size is applied to all qpair types -
admin and IO. Also we allocate resources when we get a connection
request, so we don't know qpair type at this moment.
Create a list of buffer in TCP poll group to support ICD up
to 8192 bytes when configuration ICD is less than this value.
The number of elements in this pool is hardcoded, it is planned
to add a new configuration parameter later.
Fixes issue #1569
Change-Id: I8589e3e2ea95d515f5503c6de7c1ee40aaf7b6da
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4754
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In TCP NVME initiator with zero copy enabled requests might be
completed asynchronously - out of qpair_process_completions
context. At the same time we calculate requests completed
asynchronously so that generic NVME layer can resubmit
queued requests after calling qpair_process_requests (or
poll_group_process_requests).
But there is a time gap between async request complete and
qpair_process_completions and the user can submit new IO
thereby decrease the number of free TCP requests. That means
that there might be less free requests than we excpected when
we try to resubmit queued requests.
The solution is change ERRLOG to DEBUG log since it is not a
fatal case.
Change-Id: If045ecd331cc6693e8ef450d8e15432dfa5d8812
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4859
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The current approach checks "rc == 0". It worked before adding
polling of poll group since a single qpair should return 1
completion for its own icreq while poll group can return
several completions for all qpairs attached to this poll
group (but .e.g not for those qpair who is waiting for the
completion).
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I60d05d8d6640e4e2bbaf3cd533d2f5a3637adea1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add support for the ZNS zone management receive command.
An internal nvme_zns_zone_mgmt_recv() function is created
that matches the parameters of the zone management receive
function in the ZNS specification.
Convenience functions are provided for the following
Zone Receive Action: Report Zones.
Zone Receive Actions not implemented: Extended Report
Zones.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I23589a602336da5dffccec7230d07026a868e81b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4793
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a function to get the number of zones for a zoned namespace.
Since the ZNS specification does not allow zone size == 0,
divide by zero should not be possible on a spec compliant drive.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I15e0ac8a72e244e248b7fb44f7156b182ecd98b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4792
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Add a function to get the zone size of a zoned namespace.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I89429fa2fd36307a8b34bdf91e3251c68596a48c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Add two new public APIs, spdk_nvme_detach_async() and
spdk_nvme_detach_poll_async() to detach multiple controllers in parallel
as a simple manner to users.
Hold the target controller to nvme_ctrlr_detach_ctx because users
will free any object which held it after returning spdk_nvme_detach_async().
spdk_nvme_detach_ctx holds all nvme_ctrlr_detach_ctx in a sequence
by linked list.
spdk_nvme_detach_ctx has a boolean variable polling_started to prevent
the user from calling spdk_nvme_detach_async() while
spdk_nvme_detach_poll_async() is called repeatedly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>i
Change-Id: Ib049c19f7ef24410b963fd5c777a21184f3012d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add two new helper functions, nvme_ctrlr_detach_async() and
nvme_ctrlr_detach_poll_async() to make the internal of
spdk_nvme_detach() asynchronous.
Use callback function to remove controller from the attached list after
completing shutdown and before freeing to avoid conflict between
attach and detach.
Update MOCKs in the corresponding unit test cases.
The next patch will add two public APIs spdk_nvme_detach_async()
and spdk_nvme_detach_poll_async() based on this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifbdfec2a1facde9354007c6248f280e245a36eed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the last patch, separate nvme_ctrlr_destruct()
into nvme_ctrlr_destruct_async() and nvme_ctrlr_destruct_poll_async(),
but keep nvme_ctrlr_destruct() by replacing the internal by
nvme_ctrlr_destruct_async() and nvme_ctrlr_destruct_poll_async().
Add shutdown_complete to nvme_ctrlr_detach_ctx. If shutdown_complete is true,
we can destruct the controller. The case that nvme_ctrlr_shutdown_async()
failed sets shutdown_complete to true. The case that nvme_ctrlr_disable()
is called sets shutdown_complete to true unconditionally.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3994e259f9d3ccf8fede3ac03aadef911eefb9dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is the first of the patch series to make spdk_nvme_detach()
asynchronous.
We have lengthy shutdown notification, i.e., we have to wait a long time
until shutdown processing is completed, in some SSDs. If the running system
has many such SSDs, we see large intolerable delay.
SPDK provides a controller option, no_shn_notification as a workaround.
We can use the workaround if the use case of the detach is to switch to
the next application without system reboot. However, we cannot use the
workaround if we want to do system reboot after detach.
To mitigate such lengthy shutdown notification, we need to parallelize
detachment among SSDs.
Hence the patch series will introduce an asynchronous detach API and
will use the API to parallelize detachment.
This patch adds the following changes.
Introduce a context structure and separate nvme_ctrlr_shutdown()
itno nvme_ctrlr_shutdown_async() and nvme_ctrlr_shutdown_poll_async()
using the context structure.
Name the context structure as nvme_ctrlr_detach_ctx because it will be
used only in internal APIs. The upcoming public APIs will support
multiple detachment and will have the contest structure named as
spdk_nvme_detach_ctx.
Use TSC instead of counter because polling interval will be controlled
by the caller.
Use the convenient macro, SPDK_CEIL_DIV(), to round off the time
value in milliseconds.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e2355fd24b6d6a4d6c1813577d53822304d4f33
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4414
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for the ZNS zone management send command.
An internal nvme_zns_zone_mgmt_send() function is created
that matches the parameters of the zone management send
function in the ZNS specification.
Convenience functions are provided for the following
Zone Send Actions: Close Zone, Finish Zone, Open Zone,
Reset Zone, and Offline Zone.
Zone Send Actions not implemented: Set Zone Descriptor
Extension.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9cc04776c249d2b9c515438b81a0f06aea4198fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Move ZNS specific functions to their own header file:
include/spdk/nvme_zns.h.
This is similar to how it's done for e.g. NVMe-oF with
include/spdk/nvmf.h.
This avoids cluttering the nvme.h header with ZNS specific functions.
A SPDK program that wants to use the spdk_nvme_zns_* functions will
need to include include/spdk/nvme_zns.h, however, this is similar
to how e.g. spdk_nvmf namespaced functions work.
This change is safe to do now, since there is no SPDK release with
ZNS so far.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: If39fab4e7a6924cc3bd67aa0c03e9c6de5f8a324
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since namespace types were introduced in NVMe, the CC.CSS register
has a new value (SPDK_NVME_CC_CSS_IOCS) which indicates that all
supported command sets should be selected/enabled. This possibly
includes command sets other than NVM and ADMIN only.
Therefore, if a SPDK application wants enable all the command sets
that the controller supports, it has to explicitly set
opts->command_set to SPDK_NVME_CC_CSS_IOCS.
To avoid possibly a lot of SPDK applications having to set this
parameter, check if the user requested a command set explicitly,
if not, make SPDK automatically use the most reasonable default,
based on the supported bits set by the controller.
The most common case is that you want to enable (all) the command
sets that the controller supports.
A user will still be able to restrict the controller to only use
the NVM command set (or ADMIN only), by setting opts->command_set
to a specific value.
Since the current default command set value specified by
spdk_nvme_ctrlr_get_default_ctrlr_opts() is SPDK_NVME_CC_CSS_NVM,
which is defined as 0, we cannot know if the user specified a
command set explicitly or not.
To solve this, change the default command set value specified by
spdk_nvme_ctrlr_get_default_ctrlr_opts() to CHAR_BIT (0x8), which
is larger than the largest value that can be set in CS.CSS (which
is only 3 bits wide, thus 0x7).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I45ec148d3667ab87c41fbfb6d6612a1e0e5c9d9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
cuse defines the ioctl handler to take an int for
the command, but the kernel uses unsigned int. So
cast the int parameter to unsigned int when doing
the switch.
Fixes issue #1613.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7ef13afc755ee79d8a79b3c7a09dccee7bb7aa1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is an error when do following sequences:
1. Allocate an I/O queue pair
2. Do controller reset via spdk_nvme_ctrlr_reset
3. Allocate an I/O queue pair
becaues the free_io_qids was reset and didn't
restore.
Fix issue #1621.
Change-Id: Icd533f171079c12fe03be07e659e8eed9b082384
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In file included from nvme_rdma_ut.c:36:
/home/clear/spdk/lib/nvme/nvme_rdma.c:651:22: note: ‘bad_send_wr’ was declared here
651 | struct ibv_send_wr *bad_send_wr;
| ^~~~~~~~~~~
In file included from /home/clear/spdk/lib/nvme/nvme_rdma.c:41,
from nvme_rdma_ut.c:36:
/home/clear/spdk/lib/nvme/nvme_rdma.c: In function ‘nvme_rdma_poll_group_process_completions’:
/home/clear/spdk/include/spdk/log.h:132:2: error: ‘bad_send_wr’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
132 | spdk_log(SPDK_LOG_ERROR, __FILE__, __LINE__, __func__, __VA_ARGS__)
| ^~~~~~~~
cc1: all warnings being treated as errors.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I38ae36756b4bacef7e89f0f1737684c8b8981b12
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4696
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
We can receive buffer reclaim notifications only when a qpair is
attached to a poll group (so qpair's socket is connected to a socket
poll group).
The previous assumption that we enable zcopy only for IO qpairs was
wrong since IO qpair might not use poll groups too (e.g. abort
application).
Fixes issue #1607
Change-Id: I67329d755d81da6606e65eddfeceb20839346d87
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When we support spdk_nvme_detach_async(), any controller may be
destructed asynchronously. We will be able to know the case by
ctrlr->is_destructed is true and ctrlr is queued in the attached list.
nvme_ctrlr_probe() should fail if the found ctrlr satisfies these
conditions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I299c2e5ea3c16cc1239899c163bb9e0eb921ade5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add getters to the ZNS specific data structures, so that an
SPDK application, e.g. examples/nvme/identify/identify.c,
has the ability to get and utilize the information in them.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I26056161093cc811acb6840ff7e2068e5f6058f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a new state in the SPDK NVMe state machine in order to fetch
I/O Command Set Specific Namespace data structures.
Right now there is only support for the Zoned Namespace Command Set
Specific Identify Namespace data structure.
The NVM Command Set Specific Identify Namespace data structure is
all zeroes right now, reserved for future use.
The Key Value Command Set Identify Namespace data structure is not
all zeroes, however, adding support for Key Value is outside the
scope of this patch.
The new NVME_CTRLR_STATE_IDENTIFY_NS_IOCS_SPECIFIC state is added
after the NVME_CTRLR_STATE_IDENTIFY_ID_DESCS state. This is because
we need to have fetched the identifiers in the desc list in order
to know which command set a namespace belongs to.
A slightly nicer design might have been to refactor the NVMe state
machine to first fetch the id desc list, then the identify namespace
struct, and finally the identify IOCS specific namespace struct.
However, since this would have required a lot of changes, it didn't
really seem justified.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I62cbc533c2c3eec1ccf0ba9b1c414d5a70919cff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a new state in the SPDK NVMe state machine in order to fetch
I/O Command Set Specific Controller data structures.
Right now there is only support for the Zoned Namespace Command Set
Specific Identify Controller data structure.
The NVM Command Set Specific Identify Controller data structure is
all zeroes right now, reserved for future use.
The Key Value Command Set Identify Controller data structure is also
all zeroes right now, reserved for future use.
The new NVME_CTRLR_STATE_IDENTIFY_IOCS_SPECIFIC state is added
after the NVME_CTRLR_STATE_IDENTIFY state. That way, if support for
the Zoned Namespace Command Set is enabled during probing, we will
fetch the Zoned Namespace Command Set Specific Identify Controller data
structure, regardless if any Zoned Namespaces are attached or not, and
no additional steps will be needed once a Zoned Namespace is attached.
Since we only have one command set to fetch, avoid creating
NVME_CTRLR_STATE_IDENTIFY_IOCS_SPECIFIC substates, although that will
probably be needed when support for another command set is added.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I95535b09b03b7ef2ee9a11eebdbd28aad66d65ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When adding an additional state to enum nvme_ctrlr_state, abidiff (1.6.0)
will report that almost every public interface in the nvme library has
been impacted, causing test/make/check_so_deps.sh to fail.
While it is possible that by adding another state, the compiler decides
to use a larger data type for representing enum nvme_ctrlr_state, abidiff
shouldn't complain in the first place, since spdk_nvme_ctrlr is only
ever exposed as an opaque handle. It can never be accessed directly.
Jim Harris suggested to workaround this abidiff bug by changing the type
of spdk_nvme_ctrlr::state from enum to int.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I8b85446580043e95cf791249d643907587e2f982
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4427
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This seems to be causing some CI test failures. So
disable zero copy in all cases for now for client
sockets.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iceea09fe65fb90c7df15f500878a473f1ad4152c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4473
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
LOCAL_SYS_LIBS is meant to define *direct* system
library dependencies for a given library. libuuid
is directly used by the SPDK util library and then
other SPDK libraries use uuid indirectly through
util.
So only the util library should include uuid in
LOCAL_SYS_LIBS.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia0d2d63f48e6f89891164cf2f9dc4c7a6476d4e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In NVME TCP initiator zero copy is enabled for IO qpairs
and disabled for admin qpairs
Change-Id: Ibdf521dccde9b95ec5dd15a5eb2baed8fcf8b88e
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
With zero copy enabled, some requests might be completed out
of "process_completions" call and we should take them into
account to return the correct number of completions.
Change-Id: Iba7973f6da815645bbfad0334619d46b66379226
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
We should wait for both events to occur before continue qpair
initialization.
Add a new bit to nvme_tcp_qpair::flags to track receiving of icreq ack
since icreq is sent without tcp_req and there is no way to apply
existing synchronization mechanisms.
Move tcp qpair to initializing state if we receive icresp before icreq ack,
this state will be checked during handling of icreq ack to continue
qpair initialization
Change-Id: I7f1ec710d49fb1322eb0a7f133190220b9f585ab
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
Since nvme_tcp_qpair_process_completions doesn't process poll
group, we can't get asycn notification from kernel.
1. Add a qpair to poll group before we send icreq in order to be able
to process buffer reclaim notification.
2. Check if qpair is connected to a poll group and call
nvme_tcp_poll_group_process_completions instead of
nvme_tcp_qpair_process_completions when waiting for icresp
3. Add processing of poll group to nvme_wait_for_completion_timeout
and nvme_wait_for_completion_robust_lock since they are used to
process FABRIC_CONNECT command
Change-Id: I38d2d9496bca8d0cd72e44883df2df802e31a87d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently host/data digest are bool members of nvme_tcp_qpair
structure. Change the type of this members to bitfield, reserved
bits will be used in the next patches to support zero copy.
Change-Id: If0659bf2445901e45fe0816af5f4fca5f494b154
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4206
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
Make sure that we complete a request (call user's callback)
when all acknowledgements are received. For write operation -
when we received send cmd ack, h2c ack and response from target.
For read operation - when we received send cmd ack and c2h
completed
Since we can receive send ack after resp command, store
nvme completion received in resp command in a new field
added to tcp_req structure
Change-Id: Id10d506a346738c7a641a979e1c8f86bc07465a4
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
Some NVMEoF TCP targets can send several R2T requests. We should
check that we finished the previous H2C (received buffer reclaim
notification from kernel) before sending the next H2C.
This patch adds a new ordering bit indicating the described case
and 2 fields to nvme_tcp_req to store the values from the last R2T
request which will be applied when send ack is received.
Change-Id: Iaa5ad846712ca18a8382680baa02413c18c4eb37
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4203
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Meanwhile, to verify an issue about git push unittest failure.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Idac60e5832390eb8bdce68aee639be2e9ac6cff6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4373
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add spdk_nvme_ns_get_ana_group_id() and spdk_nvme_ns_get_ana_state()
to getthe ANA group ID and the ANA state of the given namespace,
respectively.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5f1f7ee488a1eb2a7a77f9986a3bb89146628e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4354
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add ana_state and ana_group_id to struct spdk_nvme_ns and keep
them up-to-date by updating when spdk_nvme_ctrlr is created or
ANA change notice is received asynchronously. For both cases,
struct spdk_nvme_ctrlr holds the latest ANA state.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I311fe1c8015c8b8ac9659c38661244706c04b3e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an internal API nvme_ctrlr_parse_ana_log_page() to parse an ANA
log page and execute the specified callback function for each
ANA group descriptor in the ANA log page.
We will be able to copy the ANA group descriptor to the caller instead.
To do that, we will need to inform the size of the descriptor first,
but the size will not be constant.
Passing parser to the API will be more convenient.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifd8fda30a83965948017fb8ad992c0d889197cde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When creating a controller, allocate a buffer to the controller
and read ANA log page into the buffer.
When receiving ANA change notice, read ANA log page into the buffer
to keep the contents up to date.
The next patch will provide a public API to get the contents of
ANA log page the controller holds.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If5c653f4e80d157e5120bb754e6660250b2b8fa1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add an internal API nvme_wait_for_completion_robust_mutex_lock_timeout()
and related internal APIs just call it with adjusting parameters.
nvme_wait_for_completion_robust_lock_timeout() will be usable for
the current use cases of nvme_wait_for_completion_robust_lock() and
future use cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2b499643930256a39ebe279f56a399f20a7a2fde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4217
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Fix some spelling and make the message clearer
Change-Id: Ib291542a9735d6409db84f16c530e78567123f67
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4249
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
With the introduction of namespace types, the identify command has
gained an additional parameter: Command Set Identifier (CSI).
This parameter is similar to the existing parameters NSID and CNTID,
and is not used by all CNS values.
Most notably, the CSI parameter is not used for the existing CNS
values 00h (ID NS) and 01h (ID CTRL).
There are new CNS values, e.g. 05h (ID IOCS specific NS), and
06h (ID IOCS specific CTRL), which do take the new CSI parameter.
The new CNS values instead return Command Set Specific data structures,
which is basically an additional data structure. Therefore, the CNS
values 00h and 01h are very much still in use.
(Even the NVM Command Set has a Command Set Specific data structure,
even though all fields in that data structure are currently reserved.)
Since the CSI parameter is unused by all the existing calls to
nvme_ctrlr_cmd_identify() (since none of the calls send in a CNS value
that uses CSI), simply send in 0 for all existing calls.
No functional change intended.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia2b2324393a0707152b2f8511f0a22ad4a12bd46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4309
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There are two different is_active() functions.
spdk_nvme_ctrlr_is_active_ns() which iterates through the active_ns_list,
and spdk_nvme_ns_is_active(), which simply checks the nsdata.
There is an event callback that refreshes active_ns_list when a relevant
events has occured.
In nvme_ns_construct(), nvme_ctrlr_identify_ns() has just been called,
so we know that nsdata is as fresh as possible.
Hence, there is no reason to iterate through a less fresh active_ns_list.
Since we know that the nvme_ctrlr_identify_ns() call was done through the
same controller, we also know that the active/inactive is from the
perspective of the correct controller, so that is not a reason to use the
less efficient is_active() function.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I185f59b53e16e70163e33a3909f4b55ebf631cc4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4293
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since the command set identifier might be accessed at several
different states in the nvme state machine, cache it so that
we don't need to loop through the ns id desc list every time.
This is similar to how other identify fields are cached using
nvme_ns_set_identify_data().
None of the identifiers in the desc list (including the new CSI)
can change over the life time of a namespace, so caching them
should be safe.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ie06180a4b3750dfa1a42f47afe0f7f9e3ec04ba9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4266
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the nvme completion was an error, the function will return,
so there is no reason for an else statement.
In fact, the else statement in nvme_ctrlr_identify_ns_async_done()
differs from the coding style used in other nvme_ctrlr_identify_*
functions, and arguably makes the code harder to read.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: If76b823b7ca04ab98abb2912927c344ee9f12314
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4265
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Clear the ns id desc list in nvme_ns_destruct().
Without this, someone can get stale data by calling e.g.
spdk_nvme_ns_get_uuid() on a destructed namespace.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I965dd4cd6101d3a77eddbd582b9618b3436d39c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4263
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we disconnect a qpair, part of the code path is
calling _nvme_qpair_abort_queued_reqs. This takes
care of aborting any requests that were queued waiting
for slots to open on the submission queue.
It walks the STAILQ one by one and manually completes
them with ABORT status back to the caller.
But if the callback path submits another request, this
request may also get queued to the end of the queued_req
TAILQ. This can result in an infinite loop.
The solution is to use an STAILQ_SWAP to a local, empty
STAILQ. Then we ensure we only abort the requests that
were queued when _nvme_qpair_abort_queued_reqs() started
executing.
Fixes issue #1588.
I used the multipath.sh test to reproduce this on my local
system. If it ever dropped into the STAILQ loop in this
function, we would hit the infinite loop. With this patch,
I confirmed locally that now we safely avoid the infinite
loop and the test passes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I657db23efe5983bd8613c870ad62695a7fc7f689
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4284
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rename ordering bit r2t_recv to h2c_send_waiting_ack, that is more
descriptive name.
Change-Id: I6d6143ff4c1cccc74e11226b7974706808092f9a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4202
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This makes it easier to zerofy ordering bits.
Change-Id: If5696bfedfff1bf75e41c1449eac7fccb469e98b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The issue happens when SPDK RDMA initiator is connected to a remote
target and this target reports rather small (or zero) ICD and we try
to send several SGL descriptors.
Since SGL descriptors are located in ICD, we should check that their
total length fits into ICD. In other case sending such a command
will cause RDMA errors (local length error)
Change-Id: I8c0e8375dae799bc442ed2fab249cad2c4ccce51
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4131
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In cases where the SPDK nvme driver is being used as a validation/test
vehicle, users may need to allocate a currently unused qid that can be
used for creating queues using the raw interfaces. One example would be
testing N:1 SQ:CQ mappings which are supported by PCIe controllers but
not through the standard SPDK nvme driver APIs.
These new functions fulfill this purpose, and ensure that the allocated
qid will not be used by the SPDK driver for any future queues allocated
through the spdk_nvme_ctrlr_alloc_io_qpair API.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I21c33596ec415c2816728a600972b242da9d971b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3896
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This may happen when resetting a controller, if the ADMIN queue failed
to reconnect, the controller is set to failed state, so for this case
we don't need to loop until timeout, just exit.
Change-Id: I2b37af5453086cd64f3609c41eb8f6475da55fd4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4143
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
If ctrlr->cdata.cmic.ana_reporting is 1, set the corresponding
field to true.
Then use its API in the identify application.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4e74bc4c114883e4aecdbee7a6f1a02027db23a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4156
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for getting the Command Set Identifier for a given namespace.
The SPDK_NVME_CAP_CSS_IOCS feature can be implemented on top of an old NVMe
specification. If the feature is set, retrieve the NS ID Descriptor List
regardless of the NVMe specification version. The quirk is still respected.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I7b257115ecb0d813ba75201c0f48960c7070dcc9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4085
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Warn if found UUID descriptor length differs from NIDL for NIDT_UUID.
This will help identify non-compliant NVMe controllers.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Idf0daff9996147f38413318d1cd7fc3f929c5ce4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4138
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In production environments, there could be large numbers
of uevents other than nvme hotplug events. We want to
ensure we never lose an nvme uevent due to ENOBUFS
(i.e. overflow). So allocate a bigger receive buffer
for the netlink socket to ensure we never lose any events.
We only allocate one netlink socket per SPDK application,
so the extra memory consumption is not really a concern.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I663fbb093516a01a8980a1517245f92d8c76f7aa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4070
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are two bugs:
1, When the target response 0, it means target does't
support keep alive.
2, Change the interval time to us so when the keep alive
timeout is 1ms then the interval is 500us.
Fix github issue: #1565
Change-Id: I75707ab0e4e639209a9c50ef326492fae213044d
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4077
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After a submission queue is deleted, the device is supposed
to post completions for every command to the completion queue.
Previously, we never looked and completed all commands with
an ABORTED status. Instead, complete any commands in the
completion queue with the status the drive gave them.
Change-Id: If851a365d4f305cf4390454b6b26dd0f7c5b82ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3875
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
nblocks is zero based, so read path was missing the increment.
NVMe device that cuse represents can be of any block_size,
so rather than hardcoding 512 - actually verify it.
Both paths didn't request enough of a buffer from cuse.
Reported-by: Niklas Cassel
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I228dc2572bc94ecbcb913e950d912a7ab5be9434
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4037
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch does not alter functionality, just moves
around where cuse_device and block_size is determined.
Next patch will fix both paths.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5a827b5b4ab080b2aa0f76f5cdcbcb177b38b474
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4036
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Registration macro now generates function based on driver's name.
It allows to have multiple registration within single source file.
Similar pattern is used e.g. by SPDK_NVMF_TRANSPORT_REGISTER.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ied0887e8dae7fe9ca1517313be5eff8f218b7e98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3895
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow applications to understand why
they were unable to connect.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic04c7e72098c6ec1823de7d6a07d90150ef5ac20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3836
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently when the uevent processing code finds a non-uio/vfio
uevent, it just stops its loops and returns. This means that if
there are a lot of non-uio/vfio uevents, the netlink socket buffer
can build up until its full because only one non-uio/vfio event
gets drained per spdk_nvme_probe() call (which may be very
infrequently).
So modify parse_event so that it does not indicate error when
a non-uio/vfio event is found.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8a40f71ee89d597ce46129eac889fe5b7ef5171
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3876
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We should make nvme_tcp_ctrlr_connect_qpair always return
negative value if this function fails.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I457e704e39d7a3acd298fd48e89e8ea51e2ed4ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3809
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The specification says it will return INVALID FIELD if the NS
is in inactive state.
Fix issue #1551.
Change-Id: I1b32f023ed665d410f4705e439068699e2b2f8de
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3860
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is an oversight that can cause issues with looping
through the list if we end up allocating the same qpair
twice.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I513ea35398f4b724366c21be144531fbfbdb4347
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3835
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
pctrlr->cmb.mem_register_addr and pctrlr->cmb.mem_register_size
are assigned after spdk_mem_register.
if spdk_mem_register is failed , ctrlr_map_cmb hasn't been executed.
they are not be used.
So remove them.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I3d1996eee8b5260b79c4c3e0a2e1d376da2343b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3856
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
According to page35 in recent NVMe-oF spec (
NVMe-over-Fabrics-1.1-2019.10.22-Ratified), ioccsz is used
to restrict the incapsule size of I/O command, so do not
restrict the NVMe-oF OPC command and also the admin command.
We accidently trigger an bug in kernel since we do not send
the fabrics command with the incapsule and make the kernel
coredump, though the kernel has bugs.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I869a2c8ab7b9c2ac1e5cc5b603920662591c2c64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3837
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If the transport is broken, we should set errno code in
spdk_nvme_ctrlr_process_admin_completions instead of keeping silence.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie73763e1329e12a8c82a0223d360991f86c39be3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3773
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows for much more granular control over the timeout.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib23de21e60eec4207c55320579699edf284f4e16
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3794
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: To make the pdu management consistent with other PDUs, then
we can easily adapt our code into some hardware offloading solution.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic4a2847fd1b6cacda4cbaa52ff12c338f0394805
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3588
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This becomes a problem when the qpair is reconnected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6677b396cf766684a4891ffbee93aa3e4e83374d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a process cleans up IO qpairs from another crashed
process in a multi-process environment, we must not try to
abort reqs for that IO qpair. Any reqs will contain callbacks
for the crashed process which we must not try to execute in
a different process.
Fixes issue #1509.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e58cce7bdb86e3feb4084733815c086901f867e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3536
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now that drivers can be registered from upper layers there's
no need to keep them centralized inside env.
(check_format.sh complains that spdk_pci_nvme_get_driver() shouldn't
start with the spdk_ prefix - to workaround that we move the function
declaration from one place in env.h to another - that's enough to
convince check_format it really is a public function)
Change-Id: If86aebd6c997349569c71430ec815b413eb44ef8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3187
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function hasn't kept up properly with the states that
we use for tracking the qpair lifecycle.
Add checks for NVME_QPAIR_DISCONNECTING and NVME_QPAIR_DESTROYING.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I51607d4f00e94937b08fca28e766163580d46461
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3359
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This follows struct rte_pci_id which had class_id as well.
We'll need it to make some additional DPDK APIs public through
the env abstraction.
Change-Id: I794a6cd6b17e48daf53b48fa5abe3d3dcfeaa403
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3182
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is an attempt to workaround a kernel data race spotted in #1275.
We have to delay our VFIO interraction until after the kernel handles
the PCIe hotremoval. Otherwise we risk having a deadlock inside the
kernel. We could put a dummy delay in SPDK hotremove routine, but we
don't know exactly how long we have to wait, so wait for the VFIO
hotremove notification to arrive instead. From what I understand it
is always sent after the kerner already releases the critical locks.
This patch breaks hotremove for VFIO devices when running with
DPDK version < 18.05, but those reached EOL already and their support
is removed from SPDK later within this series.
It would be nice to wait for this VFIO notification inside lib/env_dpdk
e.g. inside the detach function, but we don't know there why the
detach is happening. It could be triggered by a user RPC, not physical
device hotremoval.
Change-Id: I2727de923bb2e3e05a83202465330a32a77d7cfc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1732
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1 Change the default factor from 4 to 8, which can be used
to improve the performance.
2 Change the base buffer size in nvme_tcp.c,
we should not use sizeof(struct spdk_nvme_tcp_cmd),
it is 72 bytes. Normally, the initiator will receive
C2h pdus and R2T Pdus by most, so set the size of using
sizeof(struct spdk_nvme_tcp_c2h_data_hdr) is enough.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I384f4cb026cb8d83e75b639f7256ee8cb8ed1df1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3283
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A new API spdk_nvme_ctrlr_cmd_abort_ext() gets cmd_cb_arg as a
parameter, and use it to abort requests whose cb_arg matches cmd_cb_arg.
The caller can set the parameter qpair to NULL if it wants to abort
requests on admin qpair.
Hold ctrlr->ctrlr_lock throughout because abort request is submitted
to admin qpair.
The API is not critical for performance, and so initialize parent
data first.
The API is for a specific qpair, and so hold SQID in the parent,
and it is copied to the children. On the other hand, CID is set
to child when request to abort is found.
Use an new helper function nvme_transport_qpair_iterate_requests()
to add abort request for each outstanding request which has
cmd_cb_arg as its callback context.
The case is possible such that the request to abort is not outstanding
yet but queued. Hence abort queued requests which has cmd_cb_arg
as its callback context too, but it is done only if there is no error
so far.
If only queued requests are aborted and there is no outstanding
request to abort, complete with success synchronously.
If there is no outstanding or queued request to abort, return -ENOENT.
When any abort request is submitted, the difference between success
and failure is only bit 0 of CDW0 according to the NVMe specification.
We cannot the existing helper functions nvme_request_add_child() and
nvme_cb_complete_child() but can use nvme_request_remove_child().
nvme_qpair_submit_request() may use only nvme_request_remove_child()
from these three helper functions. Hence we use req->parent as other
types of request do.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3a271c6542f8e2e6b425b3bf6151f41e924bc200
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use another list dedicated to hold queued requests being aborted
to avoid potential infinite recursive calls.
Add a helper function nvme_qpair_abort_queued_req() to move requests
whose cb_arg matches from qpair->queued_req to qpair->aborted_queued_req.
Then nvme_qpair_resubmit_requests() aborts all requests in
qpair->aborted_queued_req.
The first idea was that nvme_qpair_abort_queued_req() aborts queued
requests directly. However, this caused infinite recursive calls.
Hence separate requesting abort to queued requests and actually
aborting queued requests.
The detail of the infinite recursive calls is as follows:
Some SPDK tool submits the next request from the callback to the completion
of a request in the completion polling loop. For such tool, if the callback
submits a request and then aborts the request immediately, and the request
could not be submitted but queued, it will create infinite recursive calls
by request submit and abort, and it will not be able to get out of
completion polling loop.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8196182b981bc52dee2074d7642498a5d6ef97d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having functions without qpair on the interface allows for wider usage
e.g. by nvmf layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I3a51ad53f00eb29e2ba2681ef4ff0cc2a197b65d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Previous we fix the same issue in this commit:
cb98b2ab3e
But we forget to fix it here. And we also need to update here,
otherwise we will still face the same issue described in
commit: cb98b2ab3e
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3660dbb6e97c92ea4cb347cfce4bf23c6dfe97ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3242
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is a preparation to the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I15356c69e676dc41d3af69caa6d12c1fcb282152
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3071
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
To abort requests whose cb_arg matches, add child abort request greedily.
Iterating all outstanding requests is unique for each transport but
adding child abort is common among transports, and adding child abort
is replaceable by other operations.
Hence add qpair_iterate_requests() function to the function pointer table
of transport, and pass the operation done in the iteration by a
parameter of it.
In each transport, the implementation of qpair_iterate_requests() uses
TAILQ_FOREACH_SAFE() for potential future use cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic70d1bf2613fce2566eade26335ceed731f66a89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2038
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Recently two patches were merged but we should have get more reviews.
The fix done in TCP transport will be better because we can keep
the existing functions and make the code change minimum.
Restore nvme_rdma_req_put() and move removing rdma_req from
rqpair->outstanding_reqs to nvme_rdma_req_complete(). One exception
is the case that only nvme_rdma_req_put() is called. For the case
remove rdma_req from rqpair->outstanding_reqs before calling
nvme_rdma_req_put().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3f68dbc88c60af6b8f4ecc3209fde9b763ac3189
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3073
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Each request has a callback context as cb_arg, and the callback to
nvme_complete_request() for the completed request may reuse the context
to the new request.
On the other hand, TCP transport dequeues tcp_req from
tqpair->outstanding_reqs after calling nvme_complete_request() for
the request pointe by tcp_req.
Hence while nvme_complete_request() is executed, tqpair->outstanding_reqs
may have two requests which has the same callback context, the
completed request and the new submitted request.
The upcoming patch will search all requests whose cb_arg matches to
abort them. In the above case, the search may find two requests by
mistake.
To avoid such error, move dequeueing tcp_req from tqpair->outstanding_reqs
before calling nvme_request_complete(). One exception is the case that
only nvme_tcp_req_put() is called. For the case remove tcp_req from
tqpair->outstanding_reqs before calling nvme_tcp_req_put().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f2ac292c60431ac1e27b8657db92b220860a0a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2865
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As is well known, we may also handle the r2t data pdu receving earlier
before calling the cb function of send_cmd due to the outof order execution
of the lower layer uring socket interface.So we need to fix
this issue, otherwise the data of the sending_pdu will be placed with the
wrong data.
And it will cause the issue shown in
https://github.com/spdk/spdk/issues/1473Fixes#1473
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Idac1ad65761695f3a655b85003861c1d1f4f3875
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3215
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_rdma_qpair_submit_recvs is not judged in
nvme_rdma_poll_group_process_completions path.
If we do not clean the recvs_to_post.first we
may get the wrong current_num_recvs when the rc
is non-zero and call it again.
Change-Id: If0046e711525dcfcb419132a01fed7a09db13ba0
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3163
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Put the destroying state after the disconnected state.
Because nvme_transport_ctrlr_disconnect_qpair will modify the state
of qpair to disconnected, and in the path of rdma, it will postpone
the deletion of qpair until the release of pg by judging the
destroying state. So qpair is not deleted.
Change-Id: Ica606905cddf67d0ffda14bd48cc5f4e424f01ee
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3136
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When the user requests a non-default command set configuration, via the
probe_cb() supplied to spdk_nvme_probe(), which is not supported, then
the controller initialization will not proceed.
This patch changes that behavior into falling back to the NVM command
set and continue with the controller initialization. It is done by
assigning the NVM command set to opts.command_set such that the user
knows in attach_cb() with which command_set the controller is
configured/enabled.
The fallback is needed since the user does not have access to the
controller capabilities register. The strategy left for the user is thus
to try. However, this is an issue, as the user only has one attempt, as
subsequent calls to spdk_nvme_probe() will not trigger probe_cb() for
the controllers whose initialization did not proceed.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: Ia414628fcd7d56956649647775462e62d98c0a90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2931
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These SSDs set the oacs.security bit but do not actually
support OPAL. So do not set the controller flag indicating
SECURITY_SEND_RECV support in this case.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7fcfeafcc8d9439a1c53c60a1aea1801923a2ce5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3156
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
QEMU won't emulate wide (>8 byte) instructions on an MMIO
region. We tried to fix this previously but it wasn't sufficient.
So this version adds an explicit copy function that will only
copy 8 bytes at a time from the source cmd pointer into the
SQ cmd point in the virtualized CMB.
Fixes issue #1458.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I804005a2e8cf3f7365c1608674f82a3f843e59ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3135
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The length of a keyed SGL data block is limited by 3 bytes.
Add a check to fail requests which length exceeds 3 bytes.
In other case we can send an incorrectly formed SGL request with
an invalid or zero length.
Fixes issue #1450
Change-Id: I77cdaff5fbf4be5754a3ac6008b8ccd532ac5905
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3056
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Without this patch, we will face the following warning code
when compiled with (--with-uring --enable-debug) while testing
big I/O size: 256KB, e.g.,
"nvme_qpair.c: 474:nvme_qpair_resubmit_requests: *ERROR*:
Unable to resubmit as many requests as we completed"
The reason is because the nvme_tcp_request structure is not freed yet
if send_ack is not set, so there will be no entries when there
are other requests submit again.
And this patch can mitigate such issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I4c7616fbd3c82a883b4e9facd257a1a4f66e876d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will allow applications to discern specific connect
behavior and make choices relative to it.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I46182c285367ceb8a72511defe4508b3592b4572
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
rdma_qp may not be initialized when qpair is not fully
created. When such a qpair is being destroyed we may pass
a NULL pointer to spdk_rdma_qp_disconnect or spdk_rdma_qp_destroy
and hit an assert. This patch fixes this problem for NVMEoF
target and initiator.
Change-Id: I84787dc1b1211293c2a19f59d47727eaecd9d5a1
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3050
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When a NVMe device is hot removed, subsequent calls to
nvme_qpair_submit_request can fail with ENXIO.
The failure path handling for ENXIO did not free the request which
exhausts the qpair's free_req list eventually and all IOs are stuck
going forward.
This fix adds the same cleanup handling to nvme_qpair_submit_request
for this error case as it is done in _nvme_qpair_submit_request.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I5677d53965bdbd6d339c013483cdf42ce782099a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When using uring socket, we see following assert
nvme_tcp.c:1018: nvme_tcp_capsule_resp_hdr_handle:
Assertion `tcp_req->state == NVME_TCP_REQ_ACTIVE' failed.
Detailed info is in
https://ci.spdk.io/results/autotest-per-patch/builds/19205/archive/nvmf-tcp-vg-autotest/build.log
We face this issue, because there is also code execution ordering
between "sending callback function" and "pdu receving function".
We did not find it in physical machine testing, but finding it
in vagrant machine in CI.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I5eb241d564c0fc42ce0601b7c85999a2550f0de3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: It will be used to leverage the uring acceleration
later when we use io_uring_prep_write_fixed.
Because for using the Registered buffers feature in I/O uring,
we currently can register all the huge memories. And if we
allocate send_pdus in DMA memory, we can leverage such feature.
Change-Id: Id0ba5f7fe43202027c0378e9cbe74d861aad21e5
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3002
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvme_rdma_req_complete() and nvme_rdma_req_put() are called in a
row except a single case. Move clearing completion_flags and req
of rdma_req from nvme_rdma_req_put() to nvme_rdma_req_complete(),
and then inline nvme_rdma_req_put() because nvme_rdma_req_put()
does only insert now. To do this, change the type of the second
parameter of nvme_rdma_req_complete() from struct nvme_request
to struct spdk_nvme_rdma_req.
For the exceptional case that only nvme_rdma_req_put() is called,
change nvme_rdma_req_init() to clear rdma_req->req if returned with
error.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibf7e6d245f3a48fb895cd9e6d92596ef833f26d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Each request has a callback context as cb_arg, and the callback to
nvme_complete_request() for the completed request may reuse the context
to the new request.
On the other hand, RDMA transport dequeues rdma_req from
rqpair->outstanding_reqs after calling nvme_complete_request() for
the request pointed by rdma_req.
Hence while nvme_complete_request() is executed, rqpair->outstanding_reqs
may have two requests which has the same callback context, the
completed request and the new submitted request.
The upcoming patch will search all requests whose cb_arg matches to
abort them. In the above case, the search may find two requests by
mistake.
To avoid such error, move dequeueing rdma_req from rqpair->outstanding_reqs
before calling nvme_request_complete().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia183733f4a4cd4f85de17514ef3a884693910a05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Each request has a callback context as cb_arg, and the callback to
nvme_complete_request() for the completed request may reuse the context
to the new request.
On the other hand, nvme_pcie_qpair_complete_tracker() dequeues tr from
pqpair->outstanding_tr after calling nvme_complete_request() for the
request pointed by tr.
Hence while nvme_complete_request() is executed, pqpair->outstanding_tr
may have two requests which has the same callback context, the
completed request and the new submitted request.
The upcoming patch will search all requests whose cb_arg matches to
abort them. In the above case, the search may find two requests by
mistake.
To avoid such error, change nvme_pcie_qpair_complete_tracker() to
dequeue tr from pqpair->outstanding_tr before calling nvme_complete_request().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie9efc200d06d02d8ee2be3cb8e9fd64591bc210d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2861
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
req->qpair and qpair->ctrlr are set at their initialization, and
hence we don't have to store ctrlr to req->user_buffer but we can
get ctrlr simply from req->qpair->ctrlr.
Besides, save a local variable by overwriting qpair when it is NULL.
This is also a small clean up.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1cca763fbaae55079b38f7f16fcf779360232797
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2890
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
To reuse the code for the upcoming new function
spdk_nvme_ctrlr_cmd_abort_ext(), factor out the operation to submit
an abort request into an new helper function
_nvme_ctrlr_submit_abort_request().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id00bed8fb8dc15b77e3c7f19105c1623588faa53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2494
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
ctrlr->outstanding_aborts is counted only for submitted abort requests.
However ctrlr->outstanding_aborts had been decremented for queued
abort requests by mistake.
Subsequent patches will use parent-children for abort requests but
nvme_free_request() is not aware of such relationship.
Queued abort requests had not been canceled or aborted when controller
was destructed. Retry submitting queued abort requests had been
repeated recursively and had caused stack overflow.
This patch fixes all.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8ce0ae51ddd5ed3e1e8ac86329c8bdb7a9236b2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To reuse the code for the upcoming new function
spdk_nvme_ctrlr_cmd_abort_ext(), factor out the operation to retry
queued abort into an new helper function nvme_ctrlr_retry_queued_abort().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56bdfefe2c54990c9fd0463303b3d65ccf6e8942
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK NVMe driver had processed ACL as 1's based value by mistake,
and SPDK NVMe-oF target sets ACL to 0. Hence If NVMe driver connects
to SPDK NVMe-oF transport, spdk_nvme_ctrlr_cmd_abort() always queued
abort request.
Fix this bug to process ACL as 0's based value in
spdk_nvme_ctrlr_cmd_abort(). Besides, initialize ACL explicitly to
0 in spdk_nvmf_ctrlr_identify_ctrlr() for clarification.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id4f3a469776cdab88bcc6f41e7893885a7b78d8c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2513
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
When one of the children is failed to submit, if any children is
already submitted, the function can return success to wait for those children
to complete, but the parent should be set to failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2ea53856ee58da991bceca0058d1e1f55d42af37
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
next->cpl should have been set if nvme_ctrlr_submit_admin_request()
failed in spdk_nvme_ctrlr_cmd_abort_cpl().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4114294e398b18148d8a9ad798a656a7686c5a85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2491
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This patch tries to solve the out of order
call back handling for cmd sending and the incoming pdu handling.
Normally, the cmd call back will be called before
receving the next PDU from the target if the application
uses the sync manner.
With the uring implementation, after sending the
cmd to the target, we may have the following scenerio:
(1) Firstly receive the incoming pdu(e.g., CapsuleResp pdu, C2hdata pdu)
due to the group polling read event.
(2) Secondly execute the callback function related with NVMe command sending.
This means that the data from the initiator is really sent out to the target,
and the target receives, then sending back the data to the initiator. But the
uring io_uring_cqe event is not handled, thus if we execute
(1) first, it will clean the data structures related with nvme_tcp_req, and the
nvme_tcp_req will be used for other purpose. Then causes wrong behaviour like
the following:
"Rand Write test failed at QD=128 because fio hangs with the following error:
nvme_tcp.c: 971:nvme_tcp_capsule_resp_hdr_handle: *ERROR*:
no tcp_req is found with cid=66 for tqpair=0x7f23d8001710".
And this patch can address this issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I5043aaa8adf5033d93dedac15f633f0850e0b9f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2818
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This API is a wrapper for rdma_accept which allows
to remove spdk_rdma_qp_init_attr::initiator_side.
Change-Id: Iba2be5e74e537c498fb11c939c922b2bbda95309
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These dependencies were removed in patches that added
RDMA provider. It was incorrect change since it causes
SEGFAULT when SPDK is built with shared libraries
Change-Id: I15f4ff86a75b3d080e1c7c89d75af4959c4ed989
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2900
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is used to make spdk_nvme_connect can support
the old library for compatibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49d92fb473c3cbabd8e1240785b920480202eee9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: Make the initilaization in order.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I66962073a02b6a4c2fc79ac343cdf5310075dd63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_nvme_cuse_update_namespaces() API allows application
to repopulate namespaces on NVMe CUSE devices.
Change-Id: I5375b13bcc91b17cd26b4dc6f02d83dc33826542
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/658
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is an important aspect of ABI versioning.
There was a change to the spdk_bdev_opts struct
which is accessible from the public API that results
in an ABI change.
There was also a change in the spdk_accel_module_if struct that
will affect new modules so its major version needs to be revved.
There was also a change in the publically accessible rmda_hooks
structure which forced an ABI change in the NVMe library.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5cc6886fe01b4adc2836b6e15995471f0361dc29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2663
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is needed for shared completion queues which can still give us
successful completions on aborted requests if the qpair hasn't been
disconnected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I85cf1a81ef563d8c02d684b09d2f7ad5008e38cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1961
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When a request has been aborted, it's possible to get a completion
for an rdma request but the rdma_req->req object has already been
cleared to NULL.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5f7b1b96ff4be8c436aae9a7e2a7c9927d04e627
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1960
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds a posibility to update cuse devices after cuse
device registration.
During NVMe controller life cycle there's a posibility to create
and delete namespaces with Namespace Manage feature from NVMe
spec 1.4.
To guarantee consistency, after changing the number of namespaces
NVMe CUSE devices must be repopulated after Namespace Manage
operation.
This patch introduces cuse_nvme_ctrl_update() entry point to allow
repopulate NVMe CUSE devices.
Change-Id: I478faae040027965321af585abfc34eaf35c908c
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/650
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For now only controller to host transmition is implemented
for CUSE.
This patch separates cuse_nvme_admin_cmd_send() entry point
to be used to implement another transmition directions.
Change-Id: Ic9013a30c16cf71957c8b411ee00a43c7aa8bbb6
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1674
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Remove inclusion of spdk/event.h and spdk_internal/event.h from
SPDK NVMe library. Their dependency had been removed before.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ide3a0902b1cebb9c9033ade45d7488622e38696c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2688
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This helps ensure thread safety on creation of the
netlink socket, when probe is called from multiple
threads at once. It is also a lot more clean - we just
create it once, rather than checking every time probe
is called to see if it has to be created.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I528cedc3ff44de6ea8ecaf6d2389226502ba408e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2681
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow spdk_nvme_probe and variants to be
called from multiple threads in parallel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I534db605c9e192b943afe973981b7b503d8b7e34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will need to be done separately for poll groups.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0e432493bdb02e13fe5c73a8a09911cef573307b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1664
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This helps create a separation between processing a qpair and processing
a completion queue which can be shared across multiple qpairs.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I111dd16ec4327854f232988a96891a65813f00e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1166
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the case, there are several ctrlr used, it's better to
have the traddr to indicate which ctrlr has the issue to
shutdown.
Change-Id: Ie564bb70566ba5822938efc99125d063f7b4ae4a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2588
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add wrappers around the request and response values and track
those using the wr_id value.
This will come in handy when we start doing poll group based
completion processing.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iaff75b03e41d49f53e55e0ce65d384567988fc9d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1165
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
remove only the spdk_ prefix from static functions in
the above libraries.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I59ce032c3312fa73f30c133fd62e603c1eee2859
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2365
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When starting the QEMU NVMe SSD with "cmb_size_mb=XX"
parameter, the controller memory buffer feature is
enabled in the Guest, the SPDK NVMe driver running
in the Guest will allocate the submission queue in
the controller memory buffer by default, it will use
memset and SSE instruction when copying NVMe command
to the submission queue entry or zero the whole
submission queue, inside the memset implementation
the AVX2 instuction will be used if the CPU can support
such feature. However, due to the limitation in the
QEMU, the maximum access width to the PCI BAR space is
set to 8 Bytes, SPDK will report illegal instruction
in Guest.
Here we add a quirk for the QEMU emulated NVMe.
Fix issue #1362.
Change-Id: Ib5e2e4198d39ce7f8455175f7db283db0b01eebf
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2196
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: Ieadf271a0c8530f2440cded05ad139483a8c5937
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2383
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Do not make attempt to resubmit failed send/recv WR, instead
report and error to the upper layer (in case of new request) or
fail a qpair (in case of active polling).
In the case of failed ibv_post_send and disabled `delay_cmd_submit`
nvme_rdma_qpair_submit_request returns an error to the caller.
The caller completes failed request but RDMA layer still keeps
it in a send queue. Later RDMA layer can send the corresponding
WR and notify the upper layer about the completion of the request
for the second time.
Change-Id: I1260f215b8523d39157a5cc3fda39cd4bd87c8ec
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1662
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new RDMA provider can be enabled by passing
--with-rdma=mlx5_dv parameter to configure script
This provider uses "externally created qpair"
functionality of rdma cm - it must move a qpair
to RTS state manually
Change-Id: I72484f6edd1f4dad15430e2c8d36b65d1975e8a2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1658
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is a wrapper over RDMA CM rdma_disconnect function
The wrapper is needed since in Mellanox Direct Verbs
(aka DV) we must move qpair to error state manually
before calling rdma_disconnect
Change-Id: Ia8623c6989e7679591f2da56bafa7f4262eeebf9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
This patch adds use of RDMA provider API to NVMEoF initiator.
Makefiles have been updated with new RDMA lib dependency
Change-Id: Ieaefeb12ee9681d3db2b618c5cf0c54dc52230af
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Following patch made sure that CQ/SQ are allocated in
physically contiguous manner:
(64db67) nvme/pcie: make sure sq and cq are physically contiguous
Using MAX_IO_QUEUE_ENTRIES is enough to make sure that either
queue does not span multiple hugepages.
Yet the patch made sure that whole page is occupied only
by the queue. Which unnecessarily increases memory consumption
up to two hugepages per each qpair.
This patch changes it so that each queue alignment is limited
up to its size.
Changes in hugepages consumed when allocating io_qpair in hello_world
application:
io_queue_size Without patch With patch
256 8MiB 0MiB
1024 12MiB 4MiB
4096 24MiB 16MiB
Note: 0MiB means no new hugepages were required and qpair fits into
previously allocated hugepages (see all steps before io_qpair
allocation in hello_world).
Intersting result of this patch is that since we required alignment
up to the hugepage size this resulted in reserving even two 2MiB
hugepages to account for DPDK internal malloc trailing element.
See alloc_sz in try_expand_heap_primary() within malloc_heap.c
This patch not only reduces overall memory reserved for the
queues, but decreases increase in heap consumption on DPDK side.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I75bf86e93674b4822d8204df3fb99458dec61e9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2244
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently the new transport is dynamically allocated and looks like
not freed when the application exits. Trying to use the
__attribute__((destructor)) function to free the allocated memory,
it will not work in the case of user created thread as this function
is called right after the "main" function while other operations
may be still ongoing.
In this case, add a global array of transports.
Change-Id: I610b1e8114ba2e68abbd09ea5e02a9abce055e70
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2415
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: I2a8b70aa92828cf60d168dcf2985759e0eb9a6e3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2217
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
One of these warnings, such as:
/home/wanghailiang/spdk20200428/lib/nvme/nvme_rdma.c: In function ‘nvme_rdma_qpair_submit_request’:
/home/wanghailiang/spdk20200428/lib/nvme/nvme_rdma.c:1512:29: warning: ‘lkey’ may be used uninitialized in this function [-Wmaybe-uninitialized]
rdma_req->send_sgl[1].lkey = lkey;
^
/home/wanghailiang/spdk20200428/lib/nvme/nvme_rdma.c:1480:11: note: ‘lkey’ was declared here
uint32_t lkey;
^
Change-Id: I67b25cb62c7a0d5b298ebfe7d2673b73261040ef
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2197
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK_ERRLOG() uses spdk_log() procedure which is
customizable and redirectable, so it is preffered over fprintf.
It also prints source location which is useful.
Change-Id: I27574be4a774169f356ebd8dcdfd2a33a057f051
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1943
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVMe spec defines "Keep Alive Timer" feature ID as optional and there
are targets that do not support this. SPDK fails to connect to such
targets.
This patch allows Get Feature "Keep Alive" target to fail with
INVALID_FIELD status. In this case we just continue with keep alive
timer value stored in controller opts structure. This value is already
communicated to target in CONNECT command.
Fixes#1328
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I52e7ea3cb66073ce6cc168a169989bd179041618
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While in practice the qpair->ctrlr variable will not change within
the disconnect function, when the code is built without debug enabled,
gcc thinks that rctrlr may be uninitialized.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I355cd62f3a2baaba65d806e3746f615a0dc37f58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2056
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This needs to be done for all qpairs in the poll group.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic3a84713a3f9941f90613152328d06ac8c1f586b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1954
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We were referencing the response before checking if it was NULL.
fix kw warning #10387
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I333d13a8f16874a35d7de8e6659125f3bee83c13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1980
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Multiple nmvme_io_msg producers on the ctrlr share the same ring.
After freeing it, it should be set to NULL. In order to prevent
either nvme_io_msg_ctrlr_detach() or spdk_nvme_io_msg_process()
from interacting on freed memory.
Above happened when resolving issues in later patches.
After their respective fixes, there is no scenario that
solely reproduces this failure so no tests were added in this
patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I72b695d995b63bd002cc03e60cd4bdc82cfbe8ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1917
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This buffer was not released after failure to enqueue.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If84317c67626a3193851c90be056b8550a5fccee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1916
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previous to this change it was possible to register
same nvme_io_msg_producer twice. This kind of functionality does
not make sense in current scope of it, as each message to/from
io_msg_producer does not have identifier other than this pointer.
In case of nvme_cuse this allowed creation of multiple /dev/spdk/nvme*
devices and caused an infinite loop when detaching an nvme controller.
This patch disallows that and adds test for nvme_cuse.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5f56548d1bce878417323c12909d6970416d2020
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1938
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adjusts several return codes to provide
more than just -1.
Along with fix to json rpc error print,
where negative error code was passed to spdk_strerror().
Resulting in unkown error being reported.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I254f6d716d0ce587f88cc658163ba049378f3b2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1915
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is no indication right now that this function couldn't be called
by multiple threads on different controllers. However, internally it is
using two globals that can become corrupted if the user were to do this.
Put a lock around them so it is safe.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I59361f510eb1659c2346f1fd33c375add1dc9c81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1903
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was changed to better facilitate thread safety.
In next patch a lock will be held when going over the
cuse devices list.
Now user is expected to pass a buffer of a sufficient size
that will be filled with ctrlr or ns cuse device name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3202ef285e427111e3595389619463fda58dbef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1978
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregistering nvme_cuse when the device did not exist
resulted in SEGFAULT within nvme_io_msg_ctrlr_unregister().
To prevent that, when no nvme_cuse is registered for the
ctrlr do not unregister nvme_io_msg_producer.
RPC and spdk_nvme_cuse_unregister() now return an error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id77cebe23ff91023a24cfe091f5f62a76a9175fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1921
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds nvme_cuse_get_cuse_ctrlr_device() and
nvme_cuse_get_cuse_ns_device that returns
struct cuse_device of a given nvme controller or namespace.
Similar iteration was used in two places so they were
replaced accordingly.
Next patch will add third.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I25ada843a59c632fe330263a65456d25c5ccf4cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1918
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes more sense within the context of the nvme driver and
helps us avoid the awkward situation of getting a failed_qp callback
on a qpair that simply hasn't been connected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibac83c87c514ddcf7bd360af10fab462ae011112
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1734
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is really useful when the intent of failing the qpair is to
do something like fail over to a different controller structure
and we want back completions for everything outstanding from the
admin queue.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Icbfdf855ddb1a380da7b9036ab5da6faab862e00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1815
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By aborting all requests from every qpair when it is disconnected,
we can completely avoid having to abort requests when we enable the
qpair since nothing will be left enabled.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iba3bd866405dd182b72285def0843c9809f6500e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1788
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the onlyreasonable thing to do. Plus we need to
be in the destroying or disconnecting state to avoid
an infinite loop when aborting requests.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I38462a01f0455c3d6496434626f6f2f4663bf508
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1857
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we destroy a qpair, we need to flush all of the I/O.
But some applications will try to resubmit that I/O. We need
to not re-queue those I/O while in the context of the destroy
call so as to avoid an infinite loop.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3e4863a563d461092f6e6b4a893f965f41bf34e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1856
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This can cause infinite loops if the callback tries to
queue an additional I/O.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4b80b97d334082465d9228b799ef901645fa968e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1854
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The state should be changed and checked by the transport
layer. All transports should follow the same list of steps
when disconnecting/reconnecting.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If2647624345f2c70f78a20bba4e2206d2762f120
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1853
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The qpair states should be maintained at the generic level.
Always going through the transport disconnect function is
one step in that direction.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I019b2b4a14fe192eff5293f918d633dde2c5400a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1851
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This variable really indicates when a qpair is
no longer connected. So NVME_QPAIR_DISCONNECTED is
actually much more accurate.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ia480d94f795bb0d8f5b4eff9f2857d6fe8ea1b34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1850
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Commit 9ad044c4 remove the offset parameter in nvme_pcie_ctrlr_alloc_cmb()
and uses spdk_vtophys() to get the physical address of the submission
queue, however, the memory isn't registered to SPDK yet, so use the
offset to get the physical address again.
Change-Id: Ida0f4a8bf1e72d6446fba442a1b71f0ddaab4bb8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1933
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When iterating SGL segment, we can use existing virt_addr parameter
to return UINT64_MAX as a special value to indicate this segment need
to be described as Bit Bucket SGL.
Currently only READ command is supported, we can enable the WRITE
and COMPARE support when necessary.
Change-Id: I50aa2b226ec3449c13ed1d97b3224ee8e7de95a8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1467
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the request contains separate metadata buffer, we should set
PSDT 10b when hardware SGL is supported and dword alignment is
required. SPDK driver doesn't provide SGL metadata data buffer
APIs for now, the separate metadata buffer is alway contiguous,
so we can put the metadata buffer into a data block SGL entry.
Change-Id: I9ccfce755a3169cd2c9b908e4da76081155d9613
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1466
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The rdma_disconnect call triggers an RDMA_CM_EVENT_DISCONNECTED
message on the target side. The hope is that the target side will
reply with the same message in a reasonable amount of time. If the
target doesn't have that mechanism implemented, print an error message
and continue with the process.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I164a3538714fa3adfc306ea0c88220ea710e7c39
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1879
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
alloc functions
Make the signature look more like spdk_dma_malloc and family.
Change-Id: I6a31acf3b9edd136924b6e53b9a23c699429b9dc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/788
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Separate these two operations into different functions. It is
possible that a CMB may not be visible from the CPU, but still
be present and have data transferred to it by some other DMA
engine. Generalize the API to handle that case.
Change-Id: Ifcd282af0db734fe4a6ef2283ae8e8933d017809
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We only need to register the memory for the CMB if the user
plans to map it for use with data. Delay the operation until then.
This also gives us a way to support unmapping the CMB.
Change-Id: I6121ae2cc3f6f44efae8b52b6582ff9f68432bc8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/786
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Instead of creating an allocator where the driver manages the space,
now, since using the CMB for queues and data has already been
disallowed, just create functions to map and unmap the entire CMB.
The user can manage the space.
Change-Id: I023994deda3b517e14d2ba464c7375bf22b58456
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/785
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
We can remove the device lock from now because all the APIs are executed
base on session, the controller can return error if there are multiple
sessions, actually most drives can only support one active session.
Change-Id: I9d5f4dc01a50ec95ef97b38c9e079ef95f37e4de
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
opal_send_recv() is a wrapper implementation to use the asynchronous
security send/receive APIs, it can be used in a session context, but
from the view of one session, the opal_send_recv() is still executed
synchronously, but if the drive can support more than one session,
opal_send_recv() can be called from different sessions or threads.
Change-Id: I3a4b2ec14cb7706c39565a6b4fb8a3a4862f3d4c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1670
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
opal_cmd_finalize() is part of OPAL command construction, so move it
to the common password construction function.
Change-Id: I65ecf1c9181e622f344f7e9284058e2472accd31
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1669
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also rename it with *build* which is more meaningful.
Change-Id: I6e81e1b641ffdd04a7420e93e67448dc430f5168
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We should be giving completions for all requests when we destroy a qpair.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I802f5120f2e8289aa825872f8085ac21b5fce0f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
That is done to make sure that scenario described in github
issue #1292 won't happen
Change-Id: Ie2ad001da701e25ef984ae57da850fb84d51b734
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1771
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In some situations we may get a completion of RDMA_RECV before
completion of RDMA_SEND and this can lead to a bug described in #1292
To avoid such situations we must complete nvme_request only when
we received both RMDA_RECV and RDMA_SEND completions.
Add a new field to spdk_nvme_rdma_req to store response idx -
it is used to complete nvme request when RDMA_RECV was completed
before RDMA_SEND
Repost RDMA_RECV when both RDMA_SEND and RDMA_RECV are completed
Side changes: change type of spdk_nvme_rdma_req::id to uint16_t,
repack struct nvme_rdma_qpair
Fixes#1292
Change-Id: Ie51fbbba425acf37c306c5af031479bc9de08955
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1770
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe ctrlr init state machine shall be async whenever possible so it
is not blocking other code from processing. It can result in deadlock
when cmd producer and consumer are sharing the same thread.
This patch is making identify active ns async by introducing new
state to wait for completions.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I346d35bab4733d3941e023602854fdd5b1ef23b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1463
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
It is a prework for changes related to ctrlr init state machine.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If289580f65ae27468b659a7ea07a4e4298876e77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
The timeout is designed for REVERT action, the REVERT needs
even several minutes based on different drives. Due to the
REVERT is low level API, it does need a response from the drive,
even we returned the timeout to the user, the drive is still in
the REVERT state, and it can't be used anymore, so the timeout
here doesn't help anything, just remove it.
Change-Id: I8f5119630d52f40e5bacea8ef8f3c771ee001aeb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1665
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also rename them to security send/recv to reflect the fact.
Change-Id: Icdeb7f15849a9d1aacf5936c5954bb39875f4cd9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1651
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Function opal_cmd_finalize() is OPAL command related, it's
part of the OPAL command construction, and opal_send_recv()
is low level security send/receive channel, so it's better
to use them separately.
Change-Id: I0648585726d5caa7b37a4bc6783bcb870c028bd2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1650
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously the OPAL library uses the global session which
is OK, because the drive can only support 1 session, for
now, we can change the code to use allocated session, this
can make the library to be used in asynchronous way.
Change-Id: Ie033f905bd41c1171b8222d59925dc25729df84e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1649
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function inside opal_finalize_and_send() will be executed
synchronously, so remove the callback will make the code more
clear. Also rename the completion function with "_done" suffix.
No code logic change from this patch.
Change-Id: I03c5875457e52009768410ad29a89730a7df1c8b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1648
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently nvme_completion_poll_status object is allocated using
malloc, so it may cotnain some garbage. In some scenarious
nvme_completion_poll_cb can be triggered before we enter
spdk_nvme_wait_for_completion_*. In that case status object
will be freed by nvme_completion_poll_cb if it contains a
garbage in `timed_out` field. Later spdk_nvme_wait_for_completion
will work with already freed memory.
Fix - allocate nvme_completion_poll_status object using
calloc and explicitly zerofy it before usage
Fixes#1292
Change-Id: Iac39653a6cd102471de16e65814f0760bbeda7d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This API will allow us to simplify the polling mechanism for qpairs on a single
thread. It also will pave the way for doing transport specific aggregation of
qpair polling to increase performance.
The generic implementation is included. The transport specific calls
have yet to be implemented.
Change-Id: If07b4170b2be61e4690847c993ec3bde9560b0f0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/579
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also modify some api documentation to indicate how the
new API should be used.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Icdbfb09aceda28635fdd191c520b36c692c2c100
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1340
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
connect_io_qpair essentially allows us to split the qpair allocation process
in half which will make it possible for us to do more sophisticated things
with RDMA qpairs in poll groups. as a companion to this new API, a connect_only
option has been added to the io_qpair_opts struct which instructs alloc_io_qpair
to only allocate the qpair and not connect it.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I9ba9502dd39436006a9ac71436dd1871d648ed1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add function nvme_rdma_get_key to get either lkey
or rkey, use it in request building functions
Change-Id: Ic9e3429e07a10b2dddc133b553e437359532401d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1462
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Cache payload type and in-capsule data transfer support
Change-Id: Id40a6e86d1f29235ca3e0189d7fbcf19baa30ffe
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Here destruct contrllers are in one function, and we can
remove the duplicated codes using goto.
It can save several lines of codes.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ibf3cb9fe2ea4bfc65d42603a7b13aaf575854580
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1638
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously the SPDK NVMe driver always set PSDT to 01b for hardware SGLs
which is aligned to the Linux NVMe driver, for this case the metadata length
is not required when filling the NVMe command fields. There is no alignment
nor granularity requirement for Data Blocks for PSDT 01b case. And if the
drive reported that it needs dword alignment with SGL, for this case, when
using spearate metadata, it needs a length parameter to fill the SGL descriptor.
Change-Id: I56ffaada775fe66de7637dae15b509ee9556e80a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1351
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When the drives report that SGL dword alignment is required in
Identify Controller data structure, when using separate metadata,
PSDT should only be set with 10b. The specification says: If PSDT
01b was used, Metadata Pointer (MPTR) contains an address of a
single contiguous physical buffer that is byte aligned.
For supporting this case, SPDK driver needs a metadata SGL entry,
so we can reserve one entry in the tracker data structure.
Change-Id: I2d86a58b0395c3000626f922e56d7f2212c8a752
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Make opal_init_key() only do the key initialization.
Change-Id: Ie2eb76a1008ba66a0706b3f035c52dbd548fdfc8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use unpacked user and key parameters instead of packed
structure as the input parameter.
Change-Id: I1e7db5c9dd3f4055165d790105ec5d05961f8f92
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use the unpacked parameters instead of the packed
structure, this is more clear according to the function
definition.
Change-Id: I2de6cb456c2d40aea4408bbb1c7c6453b69cf290
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The input locking range and locking state parameters are enough,
so we don't need to pack them into a structure.
Change-Id: I6dc7074d2611c3974b1f0a80202cf5b7d73862aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unpack the opal_common_session structure in function opal_start_auth_session(),
this can help us to use only one active session structure in following patches.
Change-Id: Ic9c5f993303a923b46c79a479c2de9b143277d47
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The locking range variable has fixed 8 bytes of length, so we don't
need to check the length again in the build function.
Change-Id: Id8c667367c93de1aee829f2e190af516456ad8c9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1571
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No need to check the length parameter, inline it is more clear.
Change-Id: I2fa66ed731b20898311b6ade14b837191d366af7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1570
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Althrough the controller can only support 1 session, but we can refactor
the OPAL internal APIs running based on session, then we can allocate
a session from public APIs, currently we just use the session that
embedded in the global device structure.
No actual logic change from this patch.
Change-Id: Ifbc801970f3df6f0753a5796715667f2eaf664aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1520
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Althrough the drive reports that only one session and one comID are
supported, and it can only support synchronous method, but it should
allow users to send multiple security send/receive commands at the
same time. Looking back the implementation of existing library, it
works but not so good, here as the first step, we will not use the
global data buffer for security receive command when doing level 0
discovery.
Change-Id: Ib735129b7cb6b1fd98be5fc208fbe149f3971773
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also remove the unused ctx and a function declaration.
Change-Id: I2f76d5c4795a0bfa3c075a5be83a7be434df6a64
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The quirk can only be applied when not exceeding mqes. Given codition
is not enough as DEFAULT_IO_QUEUE_SIZE can be equal mqes + 1. In such
case driver is unable to create io queues.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I72de37ee413788ffd3483e814eded21ea05997c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
PSDT 00b also need to check the metadta alignment.
Change-Id: I117f524c61bc4c712b46c91e4d51549825d06f6c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We only set the flag to false when the controller reports SGL supported
and can use byte contiguous buffer. Also check the data block's alignment
for hardware SGL.
Change-Id: Id936c49823963000d0543fc95fbb6edba3118feb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1352
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Dword alignment and granularity are required for the data blocks when
the controller reports this capability.
Change-Id: I6b6300515a528acb34a032050ceedf673a4b326c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1315
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Actually we can just use one API to finish the requirement.
Change-Id: Ia0d3d589755e8c92f636d3d090ec642299511401
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The revert asynchronous API doesn't run as the *real* asynchronous
way, because the drive can only support synchronous module and only
1 session is supported. The reason why we added this API is that
RPC call has the default timeout value here, while the revert may
take over several minutes, the API itself doesn't short the revert
action, so just remove it and use the synchronous API instead.
The revert action will erase all the users data and bring the drive
back to the factory state, it should run in the synchronous mode,
so just remove the asynchronous API and we can increase the timeout
value when using RPC to call this API.
Change-Id: I08a082edea6385e378399423bbb229d05f8bc262
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The APIs even don't have a chance to be called if the drive can't
support OPAL feature, so just remove the NULL check, and we will
store level 0 discovery descriptors after initialization, so
spdk_opal_cmd_scan() isn't necessary here, remove it as well.
Change-Id: I24f12f2c352996d9ebe76dc015cd0b7502798359
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The previous erase locking range API didn't take the real
erase action, it's kind of secure erase, so rename it with
another name and add the real erase support.
This method is used to cryptographically erase user data within
a specific LBA Range and to reset the access control Locking
of that LBA Range.
The TPer SHALL reset the ReadLockEnabled, WriteLockEnabled,
ReadLocked, and WriteLocked column values to False for the
Locking object on which the method is invoked.
Change-Id: I0c83df589382b0a2f189642d8119e389aa4bc559
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1210
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are maximum 8 locking ranges per TPer, so we don't need to use
calloc() for each range.
Change-Id: Ie9d96ba28736dd7a91cb615ece99ebcefa695fc8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Both spdk_opal_key and opal_common_session are used in the same context,
so we don't need to save spdk_opal_key pointer in opal_common_session,
juse use the stack value.
Change-Id: I24b64711b45f09a60f9aca1175319e32de4c7e10
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For active key we don't need to store in the calloc() data
structure, because we'd better not to store any password
related structure, and it's only used in specific context,
so just use stack variable instead.
Change-Id: I4711e279ffe9a97d471f0db0b625b95a36b55d38
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If nvme_rdma_qpair_submit_sends() returns -ENOMEM,
nvme_rdma_qpair_process_completions() returns immediately.
In this case, nvme_rdma_qpair_process_completions() does not
poll CQ.
However, nvme_rdma_qpair_process_completions() can poll CQ even
when there is no free slot in SQ.
Hence move nvme_rdma_qpair_submit_sends() and
nvme_rdma_qpair_submit_recvs() after the loop to poll CQ.
nvme_rdma_qpair_submit_sends() and nvme_rdma_qpair_submit_recvs()
output error log and so checking return code of them is not
necessary and is removed in this patch.
This fixes part of the github issue #1271.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icf22879c69c3f84e6b1d91dc061b6f44237eedd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The shutdown flag is only used when resubmitting the AER, and it will not
be updated when hot remove happened, so rename it to is_destructed.
Change-Id: Iafc27bd6cb23a851ed6c96470a2a45546a399c88
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1254
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There's no reason not to publish those. Especially if
they're needed in other public headers.
Change-Id: I7dfc6922fcc0dfc46822ad8a16a375f997b98e84
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMe specification in ch.7.6 "Controller Initialization" suggests to
use only Set Features "Number of queues" command and says nothing
about Get Features. All required information is available after Set
Num Queues step.
Fixes#1270
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ide38ba9c7f063f1d6b13bfce4232c588cc906784
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
the nvme, nvmf, and thread libraries have all had public APIs
removed or changed since the API was changed to 2.0 and
backported to 20.01.1 we should rev these so versions to make
that distinction obvious.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Id48454b8d0451794abad4db452b5c4e337b23c0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow us to keep track of compatibility issues on a
per-library basis.
Change-Id: Ib0c796adb1efe1570212a503ed660bef6f142b6e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Not doing thsi was causing me to hit an assert in this funciton that was
caused by us erroneously calling into it from the error path of
_nvme_qpair_submit_request.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I46a4d9ec543281d756cc4447d3e880a98f341092
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1121
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This gives us a more standard path in the create_io_qpair path. Eventually
this will allow us to bring the connection commands out to the generic layer
in alloc_io_qpair. Then we can split the calls to create and connect at the
generic level making it possible to add rdma qpairs to a poll group in a meaningful
way.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib1b125f834c3c39a2b5050ff4a9bc4a053b95c99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This allows it to fit on three cachelines instead of four.
Change-Id: I2510b50ffcefb77fa570e738b2c6588749f30a00
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1143
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This reverts commit ea5ad0b286.
This code is moving from the nvmf target to the posix sock
layer in this series.
Change-Id: I333bdf325848e726ab82a9e6916e1bbdcd34009c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Align rdma and tcp to respect opts. Reduce default number of entries
for admin queue so it becomes memory optimization.
Linux driver by default creates admin queue with 32 depth, there is no
good reason to enlarge that queue by default within SPDK NVMe driver.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I97ceea8f350c52313021a63190fb0980f604c48e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1110
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It's more straight forward to call opal_start_generic_session() directly in
different scenarios. It will help us to use stack variable "prev_data" to
store temporary key during the session, which is more safe.
Change-Id: I70b9190ed3606cd5e26c23319aca82d4a38596cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It's not an error to send a security receive command before each
real OPAL related commands, but we don't need to do it.
Change-Id: I7628988df6ac097264db2137440f63db9e6e3660
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1127
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Althrough the spec defines the Method Status Error Code, but here the return
value is just from function uses the normal errno, such as ERANGE, so just
remove them.
Change-Id: I43be95f62a4e465090462743b91246b1d63e2acd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the TCG Storage Core Architecture V2.0, the level 0 discovery
response should use level 0 discovery header and feature descriptors to
retrieve the response data buffer. ComPacket header should be used in upper
layer.
Change-Id: I61e3e206801994b276608f9afbda800eccb2cffa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1124
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the OPAL here is just for NVMe device, so we don't need to use dev_handler as common
handler, just rename it to spdk_nvme_ctrlr. And we don't exit the initialization if
OPAL construnction had a failure. Also move the timeout initialization to construct().
Change-Id: I11f0aea961eaa3da0c6253eb03d0227f7e7e5f11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1101
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
No actual logic change except re-define some data structures.
Change-Id: Id0a483071591beee675cbc3ef368ac1fb723cfe0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also uses ComPacket header to check the received data, no actual
function changes.
Change-Id: I905fc6b8bb4656d48d43ff4ff8d1f705b9b595b9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1074
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add the error print if there is still remaining_size in
order to provide more meaningful debug info.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7b15c9c9a630ea7ecb2d3191b73c9c99f7febf31
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1189
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be re-used in the muser transport of nvmf.
Change-Id: If00e6ea79ffdc0c3bda0402f39c5f9f4f411788b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/425
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
