d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ae5a522cae
freebsd-dev/sys/powerpc/conf/NOTES

96 lines
2.4 KiB
Plaintext
Raw Normal View History

add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
# $FreeBSD$
#
# This file contains machine dependent kernel configuration notes. For
# machine independent notes, look in /sys/conf/NOTES.
Allow DTrace to be compiled-in to the kernel. This will require for AArch64 as we dont have modules yet. Sponsored by: HEIF5 Sponsored by: ARM Ltd. Differential Revision: https://reviews.freebsd.org/D1997
2015-06-10 15:53:39 +00:00
#
# Enable the kernel DTrace hooks which are required to load the DTrace
# kernel modules.
#
options KDTRACE_HOOKS
# DTrace core
# NOTE: introduces CDDL-licensed components into the kernel
#device dtrace
# DTrace modules
#device dtrace_profile
#device dtrace_sdt
#device dtrace_fbt
#device dtrace_systrace
#device dtrace_prototype
#device dtnfscl
#device dtmalloc
# Alternatively include all the DTrace modules
#device dtraceall
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
#####################################################################
# CPU OPTIONS
Unbreak the LINT kernel on powerpc64. Note that the LINT kernel configuration is TARGET_ARCH specific and must be generated with TARGET_ARCH set. Reviewed by: imp
2010-08-19 03:19:26 +00:00
# You must specify a machine directive to choose powerpc or powerpc64
#machine powerpc powerpc[64]
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
#
# You must specify at least one CPU (the one you intend to run on).
Rename OEA to AIM. The former means nothing as it applies to all processors (it's the PowerPC Operating Environment Architecture). AIM designates the processors made by the Apple-IBM-Motorola alliance and those we typically support. While here, remove the NetBSD option IPKDB. It's not an option used by us. Also, PPC_HAVE_FPU is not used by us either. Remove that too. Obtained from: Juniper, Semihalf
2007-12-16 00:45:56 +00:00
cpu AIM
Let us manage differences of Book-E PowerPC variations i.e. vendor / implementation specific vs. the common architecture definition. Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions under BOOKE_PPC4XX are not used in the code yet. This change set is not supposed to affect existing E500 support, it's just another reorg step before bringing support for E500mc, E5500 and PPC465. Obtained from: AppliedMicro, Freescale, Semihalf
2012-05-27 10:25:20 +00:00
#cpu BOOKE_E500
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
Add FPU_EMU.
2008-02-23 22:32:16 +00:00
options FPU_EMU
Also comment-out options MPC85XX. We don't define CCSRBAR_* without E500.
2008-03-04 03:05:53 +00:00
#options MPC85XX
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
options POWERMAC #NewWorld Apple PowerMacs
Unbreak the LINT build. PS3 kernels can only be built 64-bit, and LINT is built for both architectures. We need a better solution here.
2011-01-06 14:12:24 +00:00
#options PS3 #Sony Playstation 3
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
options PSIM #GDB PSIM ppc simulator
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options MAMBO #IBM Mambo Full System Simulator
[PowerPC64LE] Work around qemu TCG bug in mtmsrd emulation. The TCG implementation of mtmsrd in qemu blindly copies the entire register to the MSR, instead of the specific bit positions listed in the ISA. This means that qemu will prematurely switch endian out from under the running code instead of waiting for the rfid, causing an immediate trap as it attempts to interpret the next instruction in the wrong endianness. To work around this, ensure PSL_LE is still set before doing the mtmsrd. In the future, we may wish to just turn off translation and unconditionally use rfid to switch to the ofmsr instead of quasi-switching to the ofmsr. Add a new platform option so this can be disabled. (And so that we can conditonalize additional QEMU-specific hacks in the platform code.) Sponsored by: Tag1 Consulting, Inc.
2020-09-23 00:09:29 +00:00
options QEMU #QEMU processor emulator
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
Introduce support for cpufreq on PowerPC with the dynamic frequency switching capabilities of the MPC7447A and MPC7448.
2009-05-31 09:01:23 +00:00
# The cpufreq(4) driver provides support for CPU frequency control
device cpufreq
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
# Standard busses
Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC Macintoshes with an AGP bus.
2010-10-31 18:27:05 +00:00
device agp
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
Import support for the Sony Playstation 3 using the OtherOS feature available on firmwares 3.15 and earlier. Caveats: Support for the internal SATA controller is currently missing, as is support for framebuffer resolutions other than 720x480. These deficiencies will be remedied soon. Special thanks to Peter Grehan for providing the hardware that made this port possible, and thanks to Geoff Levand of Sony Computer Entertainment for advice on the LV1 hypervisor.
2011-01-06 04:12:29 +00:00
device glc # Sony Playstation 3 Ethernet
Driver for Apple Keywest I2C controllers found in MacIO ASICs. Used for power and thermal control, as well as GPIOs on Xserves and controlling sound codecs for Apple built-in audio. Submitted by: Marco Trillo Obtained from: NetBSD
2009-01-15 02:52:31 +00:00
device kiic # Apple Keywest I2C Controller
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
device ofwd # Open Firmware disks
Accidentally left ADB out of the PowerPC NOTES file during initial import.
2008-12-08 02:38:13 +00:00
device adb # Apple Desktop Bus
device cuda # VIA-CUDA ADB interface
Add a new driver, the ad7417, to read temperatures and voltages on some PowerMac's. Approved by: nwhitehorn (mentor)
2011-05-29 14:25:42 +00:00
device ad7417 # PowerMac7,2 temperature sensor
Add the ds1631 temperature driver.
2012-08-19 19:44:13 +00:00
device ds1631 # PowerMac11,2 temperature sensor
Add three new drivers for fan control and temperature reading on the PowerMac7,2. - The fcu driver lets us read and write the fan RPMs for all fans in the PowerMac7,2. This driver is PowerMac specific. - The ds1775 is a driver to read the temperature for the drive bay sensor. - The max6690 is another driver to read temperatures. Here it is used to read the inlet, the backside and the U3 heatsink temperature. An additional driver, the ad7417, will follow later. Thanks to nwhitehorn for guiding me through this driver development. Approved by: nwhitehorn (mentor)
2010-10-15 20:08:16 +00:00
device ds1775 # PowerMac7,2 temperature sensor
device fcu # Apple Fan Control Unit
device max6690 # PowerMac7,2 temperature sensor
Accidentally left ADB out of the PowerPC NOTES file during initial import.
2008-12-08 02:38:13 +00:00
device pmu # Apple Power Management Unit
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
device smu # Apple System Management Unit
Add support for the I2S and davbus audio controllers found in Apple PowerPC hardware. Submitted by: Marco Trillo
2009-01-25 18:20:15 +00:00
device snd_ai2s # Apple I2S Audio
device snd_davbus # Apple Davbus Audio
Move the adm1030 driver to the proper location, and rename it. For compatibility, 'device windtunnel' is still supported, but one should use 'device adm1030' instead, and this has been updated in GENERIC and NOTES.
2014-10-16 01:32:22 +00:00
device adm1030 # Apple G4 MDD fan controller
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
Fix LINT: Add backlight to NOTES
2020-10-02 20:52:09 +00:00
# Backlight subsystem
device backlight
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
#####################################################################
# Devices we don't want to deal with
Add a driver for the Chelsio T6 crypto accelerator engine. The ccr(4) driver supports use of the crypto accelerator engine on Chelsio T6 NICs in "lookaside" mode via the opencrypto framework. Currently, the driver supports AES-CBC, AES-CTR, AES-GCM, and AES-XTS cipher algorithms as well as the SHA1-HMAC, SHA2-256-HMAC, SHA2-384-HMAC, and SHA2-512-HMAC authentication algorithms. The driver also supports chaining one of AES-CBC, AES-CTR, or AES-XTS with an authentication algorithm for encrypt-then-authenticate operations. Note that this driver is still under active development and testing and may not yet be ready for production use. It does pass the tests in tests/sys/opencrypto with the exception that the AES-GCM implementation in the driver does not yet support requests with a zero byte payload. To use this driver currently, the "uwire" configuration must be used along with explicitly enabling support for lookaside crypto capabilities in the cxgbe(4) driver. These can be done by setting the following tunables before loading the cxgbe(4) driver: hw.cxgbe.config_file=uwire hw.cxgbe.cryptocaps_allowed=-1 MFC after: 1 month Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D10763
2017-05-17 22:13:07 +00:00
nodevice ccr
Plug cxgbe(4) back into !powerpc && !arm builds, instead of building it on amd64 only.
2015-01-16 01:39:24 +00:00
nodevice cxgbe # XXX: builds on powerpc64 only.
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
nodevice cxgbev
Move mpr/mps drivers from per-arch NOTES files into the MI notes file. They are in more arches they they aren't. Add appropriate nodevice directives in powerpc and arm.
2019-04-13 06:30:45 +00:00
nodevice mpr # no 64-bit atomics
nodevice mps # no 64-bit atomics
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
nodevice ppc
Redefine bus_space_tag_t on PowerPC from a 32-bit integral to a pointer to struct bus_space. The structure contains function pointers that do the actual bus space access. The reason for this change is that previously all bus space accesses were little endian (i.e. had an explicit byte-swap for multi-byte accesses), because all busses on Macs are little endian. The upcoming support for Book E, and in particular the E500 core, requires support for big-endian busses because all embedded peripherals are in the native byte-order. With this change, there's no distinction between I/O port space and memory mapped I/O. PowerPC doesn't have I/O port space. Busses assign tags based on the byte-order only. For that purpose, two global structures exist (bs_be_tag and bs_le_tag), of which the address can be taken to get a valid tag. Obtained from: Juniper, Semihalf
2007-12-19 18:00:50 +00:00
# sound
nodevice snd_cmi
add LINT build Discussed with: grehan MFC after: 1 week
2005-12-21 02:51:41 +00:00
# wants gdb_cur
nodevice dcons
nodevice dcons_crom
#####################################################################
# Options we don't want to deal with
nooption PPC_DEBUG
Fix powerpc LINT build tcpratelimit isn't supported as there's now atomic_add_64, so add it to the exclusion list Add comment for why PPC_PROBE_CHIPSET is on the list Remove UKBD_DFLT_KEYMAP now that ukbd works on all platforms.
2019-08-12 23:25:21 +00:00
nooption PPC_PROBE_CHIPSET # uses inb/outb
Reference in New Issue Copy Permalink