Commit Graph

58 Commits

Author SHA1 Message Date
Gavin Atkinson
3f4760c8e1 Add IDs for several missing Intel SMBus controllers.
Obtained from:	Data sheets, Linux defines, local hardware
MFH:		2 weeks
2017-04-02 11:36:25 +00:00
Gavin Atkinson
255bba06cf ichsmb: switch device_probe() from a large case statement to a lookup table.
The case statement was getting unmanageably large, and I'm about to add
several more devices to it.

MFC after:	2 weeks
2017-03-29 23:13:04 +00:00
Gavin Atkinson
44f3702036 Remove #define PCIS_SERIALBUS_SMBUS_PROGIF, unused since r200091 2017-03-28 21:54:36 +00:00
Alexander Motin
2b064d4653 Add some device IDs found in my new laptop. 2016-11-09 08:57:59 +00:00
Justin Hibbits
c47476d7e6 Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere().
Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count.  Migrate these to use the new bus_alloc_resource_anywhere() API.

Reviewed by:	jhb
Differential Revision:	https://reviews.freebsd.org/D5370
2016-02-27 03:38:01 +00:00
Eric van Gyzen
bb51c27943 ichsmb: add PCI device ID for Intel Sunrise Point-H SMBus controller
MFC after:	3 days
Sponsored by:	Dell Inc.
2016-02-16 02:23:39 +00:00
Rui Paulo
d2f56f2e3d ichsmb: add Intel Wellsburg device ID.
Submitted by:	Michael Allen <mallen pi-coral.com>
MFC after:	1 week
Sponsored by:	Pi-Coral, Inc.
2015-06-10 22:39:10 +00:00
Rui Paulo
e505494683 ichsmb: remove whitespace. 2015-06-10 22:37:09 +00:00
Takanori Watanabe
7a4864d1bb Add Lynx-Point LP smbus controller ID. 2015-04-24 07:24:31 +00:00
Rui Paulo
63f9a9fa26 ichsmb: add a device id for the Wildcat Point-LP.
MFC after:	1 week
2015-04-06 06:02:58 +00:00
Alexander Motin
e67f3bec39 Add bunch of PCI IDs of Intel Wildcat Point (9 Series) chipsets.
MFC after:	1 week
2014-11-26 04:23:21 +00:00
Alexander Motin
f00fac180f Add ID for Intel Avoton SMBus controller. 2013-11-15 13:19:15 +00:00
Jack F Vogel
428e286da3 Add new Coleto Creek device support: SATA, SMBus, and Watchdog devices.
MFC after: 1 week
2013-07-19 21:37:40 +00:00
Jack F Vogel
cf40e447b9 Add Intel Lynx Point PCH SMBus Device IDs 2013-01-02 22:01:26 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Attilio Rao
2d49ef5934 Revert r224736 as the introduced value was already present.
Reported by:	tinderbox, pluknet
Approved by:	re (kib)
2011-08-09 20:55:54 +00:00
Attilio Rao
b1f0f5b76e Add the PCI ID for the PCH DH89xxCC on ichsmb as got from Linux counterpart.
Sponsored by:	Sandvine Incorporated
Reviewed by:	emaste, rstone
Approved by:	re (bz)
MFC after:	3 days
2011-08-09 16:42:31 +00:00
Jack F Vogel
73e3bb6563 Chipset support for the new Intel Panther Point PCH, thanks
to Seth Heasley for preparing the changes.
2011-05-11 20:31:27 +00:00
Jack F Vogel
bf0477b215 Support for the new Patsburg PCH chipset:
- SMBus Controller
     - SATA Controller
     - HD Audio Controller
     - Watchdog Controller

Thanks to Seth Heasley (seth.heasley@intel.com) for providing us code.

MFC after 3 days
2011-02-01 01:05:11 +00:00
Jack F Vogel
d5267ede37 Support for the new DH89xxCC PCH chipset including:
- SATA controller
      - Watchdog timer
      - SMBus controller
2011-01-31 18:41:52 +00:00
Jack F Vogel
dce8a362df Add support for Intel Cougar Point SMBus controller.
MFC afer 1 week
2010-08-27 23:24:08 +00:00
Andriy Gapon
ac2703ea39 ichsmb: add another pci id
This is SMBus controller found in Intel Platform Controller Hub (PCH),
which is a general name that refers to Intel 5 Series chipsets and
3400 Series chipsets.

Submitted by:	Dmitry S. Luhtionov <mitya@cabletv.dp.ua>
MFC after:	3 days
2009-12-16 12:25:27 +00:00
Andriy Gapon
5e6d0a234e ichsmb: drop default attachment to generic smbus hardware
Attach only to devices known to be supported.
This change overrided and undoes r200053.

Suggested by:	jhb
MFC after:	2 weeks (only to stable/8)
2009-12-04 05:45:46 +00:00
Andriy Gapon
86439baac2 ichsmb: try attaching only to intel hardware in the default case
Ideally we should attempt attaching only to known supported devices.
But I am not sure that we have all supported PCI IDs already listed,
and I am too young to die, err, I don't want to take the heat from
causing a trouble to someone.

MFC after:	1 week
X-ToDo:		drop the default case
2009-12-03 08:11:20 +00:00
Andriy Gapon
d93b49b38c ichsmb: add pci ids for some newer supported hardware
Submitted by:	Dmitry S. Luhtionov <mitya@cabletv.dp.ua>
MFC after:	5 days
2009-12-03 08:01:29 +00:00
John Baldwin
bb6bb7fe1b - Change ichsmb(4) to follow the format of all the other smbus controllers
for slave addressing by using left-adjusted slave addresses (i.e.
  xxxxxxx0b).
- Require the low bit of the slave address to always be zero in smb(4) to
  help catch broken applications.
- Adjust some code in the IPMI driver to not convert the slave address for
  SSIF to a right-adjusted address.  I (or possibly ambrisko@) added this in
  the past to (unknowingly) work around the bug in ichsmb(4).

Submitted by:	 Andriy Gapon <avg of icyb.net.ua> (1,2)
MFC after:	1 month
2009-02-03 16:14:37 +00:00
John Baldwin
32d8ea8423 - Use bus_foo() rather than bus_space_foo() and remove bus space tag/handle
from softc.
- Mark interrupt handlers MPSAFE as these drivers have been locked for a
  while.
2008-06-06 18:29:56 +00:00
Remko Lodder
1b72425ab3 Add the Intel 82801FB (ICH6) SMBus controller and the
Intel 82801GB (ICH7) SMBus controller.

PR:		85106 [1]
PR:		99663 [2]
Approved by:	imp (mentor), jhb
Submitted by:	Oliver Fromme <olli at lurza.secnetix dot de>, [1]
		Arthur Hartwig <arthur dot hartwig at nokia dot com>, [1]
		Lowell Gilbert <lgfbsd at be-well dot ilk dot org> [2]@
MFC After:	3 days
2007-11-26 19:54:54 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
John Baldwin
234093730d Add a device ID for the 631xESB/6321ESB SMBus controller.
Submitted by:	Reed A. Cartwright <reed scit.us>
2007-01-11 21:13:27 +00:00
John Baldwin
85064e683c Various updates to most of the smbus(4) drivers:
- Use printf() and device_printf() instead of log() in ichsmb(4).
- Create the mutex sooner during ichsmb(4) attach.
- Attach the interrupt handler later during ichsmb(4) attach to avoid
  races.
- Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus
  driver does this already.
- Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and
  viapm(4).
- Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values
  into BARs, and the PCI bus layer will allocate resources now if needed.
- Merge intpm(4) and intsmb(4) into just intsmb(4).  Previously, intpm(4)
  attached to the PCI device and created an intsmb(4) child.  Now,
  intsmb(4) just attaches to PCI directly.
- Change several intsmb functions to take a softc instead of a device_t
  to make things simpler.
2007-01-11 19:56:24 +00:00
John Baldwin
7048a99c30 Minor overhaul of SMBus support:
- Change smbus_callback() to pass a void * rather than caddr_t.
- Change smbus_bread() to pass a pointer to the count and have it be an
  in/out parameter.  The input is the size of the buffer (same as before),
  but on return it will contain the actual amount of data read back from
  the bus.  Note that this value may be larger than the input value.  It
  is up to the caller to treat this as an error if desired.
- Change the SMB_BREAD ioctl to write out the updated struct smbcmd which
  will contain the actual number of bytes read in the 'count' field.  To
  preserve the previous ABI, the old ioctl value is mapped to SMB_OLD_BREAD
  which doesn't copy the updated smbcmd back out to userland.  I doubt anyone
  actually used the old BREAD anyway as it was rediculous to do a bulk-read
  but not tell the using program how much data was actually read.
- Make the smbus driver and devclass public in the smbus module and
  push all the DRIVER_MODULE()'s for attaching the smbus driver to
  various foosmb drivers out into the foosmb modules.  This makes all
  the foosmb logic centralized and allows new foosmb modules to be
  self-contained w/o having to hack smbus.c everytime a new smbus driver
  is added.
- Add a new SMB_EINVAL error bit and use it in place of EINVAL to return
  an error for bad arguments (such as invalid counts for bread and bwrite).
- Map SMB bus error bits to EIO in smbus_error().
- Make the smbus driver call bus_generic_probe() and require child drivers
  such as smb(4) to create device_t's via identify routines.  Previously,
  smbus just created one anonymous device during attach, and if you had
  multiple drivers that could attach it was just random chance as to which
  driver got to probe for the sole device_t first.
- Add a mutex to the smbus(4) softc and use it in place of dummy splhigh()
  to protect the 'owner' field and perform necessary synchronization for
  smbus_request_bus() and smbus_release_bus().
- Change the bread() and bwrite() methods of alpm(4), amdpm(4), and
  viapm(4) to only perform a single transaction and not try to use a
  loop of multiple transactions for a large request.  The framing and
  commands to use for a large transaction depend on the upper-layer
  protocol (such as SSIF for IPMI over SMBus) from what I can tell, and the
  smb(4) driver never allowed bulk read/writes of more than 32-bytes
  anyway.  The other smb drivers only performed single transactions.
- Fix buffer overflows in the bread() methods of ichsmb(4), alpm(4),
  amdpm(4), amdsmb(4), intpm(4), and nfsmb(4).
- Use SMB_xxx errors in viapm(4).
- Destroy ichsmb(4)'s mutex after bus_generic_detach() to avoid problems
  from child devices making smb upcalls that would use the mutex during
  their detach methods.

MFC after:	1 week
Reviewed by:	jmg (mostly)
2006-09-11 20:52:41 +00:00
Brian Somers
0d10741255 This signal handling code is worse than a no-op. If a
signal is received during the msleep, the msleep is retried
indefinitely as it just keeps returning ERESTART because of
the pending signal.

Instead, just don't PCATCH - the signal can wait.

Sponsored by:	Sophos/ActiveState
2006-01-03 17:01:43 +00:00
Brian Somers
fa6e2680c0 Make ichsmb unloadable.
It seems that the unload problems were due to a dodgy sc->smb usage and a
missing mtx_destroy().

Sponsored by:	ActiveState/Sophos
MFC after:	3 weeks
2005-07-29 00:20:50 +00:00
Takanori Watanabe
2e6e32da7b Make ichsmb(4) child device handling properly. 2005-06-10 16:12:43 +00:00
Takanori Watanabe
6193c1880d Make ichsmb loadable.
PR:	kern/81912
Submitted by:	 nork
2005-06-05 11:55:29 +00:00
Warner Losh
b77e575e1d Use BUS_PROBE_DEFAULT for pci probe return value 2005-03-05 18:17:35 +00:00
Joerg Wunsch
a5f50ef9e4 netchild's mega-patch to isolate compiler dependencies into a central
place.

This moves the dependency on GCC's and other compiler's features into
the central sys/cdefs.h file, while the individual source files can
then refer to #ifdef __COMPILER_FEATURE_FOO where they by now used to
refer to #if __GNUC__ > 3.1415 && __BARC__ <= 42.

By now, GCC and ICC (the Intel compiler) have been actively tested on
IA32 platforms by netchild.  Extension to other compilers is supposed
to be possible, of course.

Submitted by:	netchild
Reviewed by:	various developers on arch@, some time ago
2005-03-02 21:33:29 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Doug Ambrisko
c3c409c498 Add PCI Device ID for 6300ESB ICH. If allocating 16 bytes fails then try 32.
This is also require for 6300ESB.
2004-06-24 18:21:28 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Tom Rhodes
a122cca953 These are changes to allow to use the Intel C/C++ compiler (lang/icc)
to build the kernel. It doesn't affect the operation if gcc.

Most of the changes are just adding __INTEL_COMPILER to #ifdef's, as
icc v8 may define __GNUC__ some parts may look strange but are
necessary.

Additional changes:
 - in_cksum.[ch]:
   * use a generic C version instead of the assembly version in the !gcc
     case (ASM code breaks with the optimizations icc does)
     -> no bad checksums with an icc compiled kernel
     Help from:		andre, grehan, das
     Stolen from: 	alpha version via ppc version
     The entire checksum code should IMHO be replaced with the DragonFly
     version (because it isn't guaranteed future revisions of gcc will
     include similar optimizations) as in:
        ---snip---
          Revision  Changes    Path
          1.12      +1 -0      src/sys/conf/files.i386
          1.4       +142 -558  src/sys/i386/i386/in_cksum.c
          1.5       +33 -69    src/sys/i386/include/in_cksum.h
          1.5       +2 -0      src/sys/netinet/igmp.c
          1.6       +0 -1      src/sys/netinet/in.h
          1.6       +2 -0      src/sys/netinet/ip_icmp.c

          1.4       +3 -4      src/contrib/ipfilter/ip_compat.h
          1.3       +1 -2      src/sbin/natd/icmp.c
          1.4       +0 -1      src/sbin/natd/natd.c
          1.48      +1 -0      src/sys/conf/files
          1.2       +0 -1      src/sys/conf/files.amd64
          1.13      +0 -1      src/sys/conf/files.i386
          1.5       +0 -1      src/sys/conf/files.pc98
          1.7       +1 -1      src/sys/contrib/ipfilter/netinet/fil.c
          1.10      +2 -3      src/sys/contrib/ipfilter/netinet/ip_compat.h
          1.10      +1 -1      src/sys/contrib/ipfilter/netinet/ip_fil.c
          1.7       +1 -1      src/sys/dev/netif/txp/if_txp.c
          1.7       +1 -1      src/sys/net/ip_mroute/ip_mroute.c
          1.7       +1 -2      src/sys/net/ipfw/ip_fw2.c
          1.6       +1 -2      src/sys/netinet/igmp.c
          1.4       +158 -116  src/sys/netinet/in_cksum.c
          1.6       +1 -1      src/sys/netinet/ip_gre.c
          1.7       +1 -2      src/sys/netinet/ip_icmp.c
          1.10      +1 -1      src/sys/netinet/ip_input.c
          1.10      +1 -2      src/sys/netinet/ip_output.c
          1.13      +1 -2      src/sys/netinet/tcp_input.c
          1.9       +1 -2      src/sys/netinet/tcp_output.c
          1.10      +1 -1      src/sys/netinet/tcp_subr.c
          1.10      +1 -1      src/sys/netinet/tcp_syncache.c
          1.9       +1 -2      src/sys/netinet/udp_usrreq.c

          1.5       +1 -2      src/sys/netinet6/ipsec.c
          1.5       +1 -2      src/sys/netproto/ipsec/ipsec.c
          1.5       +1 -1      src/sys/netproto/ipsec/ipsec_input.c
          1.4       +1 -2      src/sys/netproto/ipsec/ipsec_output.c

          and finally remove
            sys/i386/i386        in_cksum.c
            sys/i386/include     in_cksum.h
        ---snip---
 - endian.h:
   * DTRT in C++ mode
 - quad.h:
   * we don't use gcc v1 anymore, remove support for it
   Suggested by:	bde (long ago)
 - assym.h:
   * avoid zero-length arrays (remove dependency on a gcc specific
     feature)
     This change changes the contents of the object file, but as it's
     only used to generate some values for a header, and the generator
     knows how to handle this, there's no impact in the gcc case.
   Explained by:	bde
   Submitted by:	Marius Strobl <marius@alchemy.franken.de>
 - aicasm.c:
   * minor change to teach it about the way icc spells "-nostdinc"
   Not approved by:	gibbs (no reply to my mail)
 - bump __FreeBSD_version (lang/icc needs to know about the changes)

Incarnations of this patch survive gcc compiles since a loooong time,
I use it on my desktop. An icc compiled kernel works since Nov. 2003
(exceptions: snd_* if used as modules), it survives a build of the
entire ports collection with icc.

Parts of this commit contains suggestions or submissions from
Marius Strobl <marius@alchemy.franken.de>.

Reviewed by:	-arch
Submitted by:	netchild
2004-03-12 21:45:33 +00:00
Nate Lawson
5fd86f39d0 Update the comment to indicate ICH5 support 2003-08-31 19:23:00 +00:00
Nate Lawson
58f946c5f5 Add support for the 82801EB (ICH5) SMBus controller.
PR:		kern/55485
Submitted by:	Shin-ichi Yoshimoto <yosimoto@waishi.jp>
MFC after:	1 day
2003-08-31 01:28:02 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Warner Losh
77e6a3b2dd Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 06:00:27 +00:00
Yoshihiro Takahashi
0399c2578e typo.
Submitted by:	SAWADA Hodaka <hoda@tail.gr.jp>
MFC after:	1 day
2002-10-18 12:06:01 +00:00
Mark Peek
99c027ed09 Add PCI ID for ICH4 SMBus controller. 2002-08-12 16:22:12 +00:00
John Baldwin
492da65ed7 Detect and attach to the ICH3 SMBus controller.
PR:		i386/36972
Submitted by:	Colin Perkins <csp@isi.edu>
Requested by:	Larry Rosenman <ler@lerctr.org>
MFC After:	7 days
2002-05-08 00:51:54 +00:00