Move static variable definition (cdevsw) to a more conventional location
(the C file it is used in), rather than a header.
This fixes the GCC warning, -Wunused-variable ("defined but not used") when
the tpm20.h header is included in files other than tpm20.c (e.g.,
tpm_tis.c).
X-MFC-with: r342084
Sponsored by: Dell EMC Isilon
On amd64 the RSP address can be read in single 8-byte transaction,
which is obviously not possible on 32-bit platforms. Fix that
by performing 2 4-byte read on them.
Obtained from: Semihalf
Sponsored by: Stormshield
This fixes a warning seen when compiling amd64 GENERIC with clang 7.
Also remove the workaround added in r337324. clang 7 and gcc 4.2
generate the same code with or without the code change.
Reviewed by: imp (previous version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18603
- Fix PR 227760 by getting the TOE to respond to the SYN after the call
to toe_syncache_add, not during it. The kernel syncache code calls
syncache_respond just before syncache_insert. If the ACK to the
syncache_respond is processed in another thread it may run before the
syncache_insert and won't find the entry. Note that this affects only
t4_tom because it's the only driver trying to insert and expand
syncache entries from different threads.
- Do not leak resources if an embryonic connection terminates at
SYN_RCVD because of L2 lookup failures.
- Retire lctx->synq and associated code because there is never a need to
walk the list of embryonic connections associated with a listener.
The per-tid state is still called a synq entry in the driver even
though the synq itself is now gone.
PR: 227760
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Those should ensure correctness of ichwd_find_ich_lpc_bridge() and
ichwd_find_ich_lpc_bridge() as well as make it easier for both humans
and static analyzers to see the relation between tco_version and ich and
smb variables in ichwd_identify().
Reported by: Coverity
CID: 1396314, 1396317
MFC after: 10 days
The code is unreachable since the entries of radeon_ioctls[] are not
associated with any device: we provide only the KMS entry points.
Moreover, r600_cp_dispatch_texture() contains an integer overflow bug
that can be triggered from userspace.[1]
Reported by: Anonymous of the Shellphish Grill Team[1]
Reviewed by: dumbbell
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18516
This includes removing stray whitespace, adding a line after the
variable declaration block and removing a redundant check.
MFC after: 1 week
X-MFC with: r339754
In testing on a Dell Latitude 7480, having ig4.ko loaded during a
suspend caused the system to hang. It turns out that ig4iic_intr() was
being called after the device entered D3, and entered an infinite loop
because a read of the I2C status register returned all ones, causing us
to attempt to read a byte from the data buffer until one of the status
bits clears. This occured because ig4iic_pci0 shares an interrupt with
the VGA device on this laptop, so ig4iic_intr() gets called even when
there is no work to do. This is exactly the problem fixed by r342170,
which resolves the hang for me and allows suspend/resume to work with
ig4.ko loaded. So, re-enable autoloading of ig4.ko in the hope that
r342170 resolves the problem universally.
Reviewed by: gonzo
MFC after: 1 month (pending an MFC of r342170)
Differential Revision: https://reviews.freebsd.org/D18587
The goal of this change is to fix a problem with PCI shared interrupts
during suspend and resume.
I have observed a couple of variations of the following scenario.
Devices A and B are on the same PCI bus and share the same interrupt.
Device A's driver is suspended first and the device is powered down.
Device B generates an interrupt. Interrupt handlers of both drivers are
called. Device A's interrupt handler accesses registers of the powered
down device and gets back bogus values (I assume all 0xff). That data is
interpreted as interrupt status bits, etc. So, the interrupt handler
gets confused and may produce some noise or enter an infinite loop, etc.
This change affects only PCI devices. The pci(4) bus driver marks a
child's interrupt handler as suspended after the child's suspend method
is called and before the device is powered down. This is done only for
traditional PCI interrupts, because only they can be shared.
At the moment the change is only for x86.
Notable changes in core subsystems / interfaces:
- BUS_SUSPEND_INTR and BUS_RESUME_INTR methods are added to bus
interface along with convenience functions bus_suspend_intr and
bus_resume_intr;
- rman_set_irq_cookie and rman_get_irq_cookie functions are added to
provide a way to associate an interrupt resource with an interrupt
cookie;
- intr_event_suspend_handler and intr_event_resume_handler functions
are added to the MI interrupt handler interface.
I added two new interrupt handler flags, IH_SUSP and IH_CHANGED, to
implement the new intr_event functions. IH_SUSP marks a suspended
interrupt handler. IH_CHANGED is used to implement a barrier that
ensures that a change to the interrupt handler's state is visible
to future interrupts.
While there, I fixed some whitespace issues in comments and changed a
couple of logically boolean variables to be bool.
MFC after: 1 month (maybe)
Differential Revision: https://reviews.freebsd.org/D15755
PR: maybe related to 233998 (inconclusive at this time)
Submitted by: byuu <byuu AT tutanota.com> (previous version)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D18506
It was written basing on:
TCG PC Client Platform TPM Profile (PTP) Specification Version 22, Revision 1.03.
It only supports Locality 0. Interrupts are only supported in FIFO mode.
The driver in FIFO mode was tested on x86 with Infineon SLB9665 discrete TPM chip.
Driver in both modes was also tested on qemu with swtpm running on host.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D18048
This is based on a patch developed by
Tetsuya Uemura <t_uemura@macome.co.jp>.
Many thanks!
Submitted by: Tetsuya Uemura <t_uemura@macome.co.jp> (earlier version)
Tested by: Tetsuya Uemura <t_uemura@macome.co.jp>
MFC after: 2 weeks
very minimal prints and even few important messages will not get logged.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
capable IOs. NVME specification supports specific type of scatter gather list
called as PRP (Physical Region Page) for IO data buffers. Since NVME drive is
connected behind SAS3.5 tri-mode adapter, MegaRAID driver/firmware has to convert
OS SGLs in native NVMe PRP format. For IOs sent to firmware, MegaRAID firmware
does this job of OS SGLs to PRP translation and send PRPs to backend NVME device.
For fastpath IOs, driver will do this OS SGLs to PRP translation.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
required Write IOs as Fast Path IOs (after the appropriate checks
allowing Fast Path to be used) to the appropriate physical drives
(translated from the OS logical IO) and wait for all Write IOs to complete.
Design: A write IO on RAID volume will be examined if it can be sent in
Fast Path based on IO size and starting LBA and ending LBA falling on to
a Physical Drive boundary. If the underlying RAID volume is a RAID 1/10,
driver issues two fast path write IOs one for each corresponding physical
drive after computing the corresponding start LBA for each physical drive.
Both write IOs will have the same payload and are posted to HW such that
replies land in the same reply queue.
If there are no resources available for sending two IOs, driver will send
the original IO from upper layer to RAID volume through the Firmware.
When both IOs are completed by HW, the resources will be released
and SCSI IO completion handler will be called.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
stream to help HBA Firmware do the Full Stripe Writes. For read IOs on
certain RAID volumes like Read Ahead volumes,this will help driver to
send it to Firmware even if the IOs can potentially be sent to
hardware directly (called fast path) bypassing firmware.
Design: 8 streams are maintained per RAID volume as per the combined
firmware/driver design. When there is no stream detected the LRU stream
is used for next potential stream and LRU/MRU map is updated to make this
as MRU stream. Every time a stream is detected the MRU map
is updated to make the current stream as MRU stream.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
for different number of supported VDs for SAS3.5 MegaRAID adapters.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
In the nda(4) driver, only set DISKFLAG_CANDELETE (a.k.a. can support
BIO_DELETE) if the drive supports Dataset Management. There are reports
that without this check, VMWare Workstation does not work reliably.
Fix is to check the ONCS field in the NVMe Controller Data structure for
support. This check previously existed but did not survive the
big-endian changes.
Reported by: yuripv@yuripv.net
Reviewed by: imp, mav, jimharris
Approved by: imp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18493
The pwm subsystem consist of API for PWM controllers, pwmbus to register them
and a pwm(8) utility to talk to them from userland.
Reviewed by: oshgobo (capsicum), bcr (manpage), 0mp (manpage)
Differential Revision: https://reviews.freebsd.org/D17938
If bus_dmamap_load_mbuf() fails following a defrag, the caller of
bwn_dma_tx_start() would free the original mbuf after m_defrag() had
already done so. Fix this by returning the defragged mbuf to the
caller instead. Update bwn_pio_tx_start() similarly for consistency.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed by: landonf
Tested by: landonf
MFC after: 3 days
admbug: 820
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18342
PR: 217505
Submitted by: John O. Brickley <obryan.brickley@gmail.com>, updated by Maciej Pasternacki <maciej@pasternacki.net>
Reported by: John O. Brickley <obryan.brickley@gmail.com>
MFC after: 1 week
initialize the controller.
According to the datasheet, the old code checks if port 2 (P2E, 0x4) was
the only enabled port (except port 0, which was ignored by mask 0xfe),
and issue a write to the PCS register to disable all but port 0, right
before ahci_ctlr_reset.
Some other operating systems would issue a port enable to all ports, but
since the current code only does the special initialization for ICH8M,
it entirely and rely on BIOS to do the right thing (the alternative
would be https://reviews.freebsd.org/D18300?id=50922 , should we see
reports that we really need to do it).
Reviewed by: mav
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D18300
On EF10 HW we can avoid sending packets without checksum offload
or with IP-only checksum offload to dedicated queues. Instead, we
can use option descriptors to change offload policy on any queue
during runtime. Thus, we don't need to create two dedicated queues.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18390
The number of Tx queues on event queue 0 can depend on the NIC family type,
and this property will be leveraged by future patches.
This patch prepares the code for this change.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18389
FreeBSD driver needs a patch to provide a means for packets
which do not need checksum offload but have flow ID set
to avoid hitting only the first Tx queue (which has been used
for packets not needing checksum offload).
This should be possible on Huntington, Medford or Medford2 chips
since these support toggling checksum offload on any given queue
dynamically by means of pushing option descriptors.
The patch for FreeBSD driver will then need a means to figure out
whether the feature can be used, and testing adapter family might
not be a good solution.
This patch adds a feature bit specifically to indicate support
for checksum option descriptors. The new feature bits may have
more users in future, apart from the mentioned FreeBSD patch.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18388
In order to find out why the first event queue and corresponding
interrupt is triggered more frequent, it is useful to know which
events go to each event queue.
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18418
devstat_end_transaction() was called before the i/o was actually ended
(by delivering it to GEOM), so at least the i/o length was messed up.
It was always recorded as 0, so the average transaction size and the
average transfer rate was always displayed as 0.
devstat_end_transaction() was not called at all for the error case, so
there were sometimes multiple starts per end. I didn't observe this in
practice and don't know if it did much damage. I think it extended the
length of the i/o to the next transaction.
Reviewed by: kib
ACPI SRAT table on arm64 uses GICC entries to provide CPU locality
information. These entries use an AcpiProcessorUid to identify the
CPU (unlike on x86 where the entries have an APIC ID).
Update acpi_pxm.c to extend the cpu_add/cpu_find/cpu_get_info
functions to handle AcpiProcessorUid. Use the updated functions
while parsing ACPI_SRAT_GICC_AFFINITY entry for arm64.
Also update sys/conf/files.arm64 to build acpi_pxm.c when ACPI is
enabled.
Reviewed by: markj (previous version)
Differential Revision: https://reviews.freebsd.org/D17942
This moves the architecture independent parts of sys/x86/acpica/srat.c
to sys/dev/acpica/acpi_pxm.c, to be used later on arm64. The function
declarations are moved to sys/dev/acpica/acpivar.h
We also need to update sys/conf/files.{i386,amd64} to use the new file.
No functional changes.
Reviewed by: markj, imp
Differential Revision: https://reviews.freebsd.org/D17941
Because of that typo the driver would try to attach to every device
on acpi bus. That disrupted acpi attachment of uart driver, at least.
MFC after: 4 days
X-MFC with: r339754
The iflib subsystem implements netmap support in a driver-independent
way (sys/net/iflib.c). We can therefore remove the headers that
used to implement netmap support for all the drivers now supported
by iflib (em, igb, ixl, ixgbe, lem).
MFC after: 1 week
through.
cxgb4vf doesn't own the buffer size list but still expects the first two
entries to be 4K and some power of 2 respectively. The BSD cxgbe
doesn't care where its preferred buffer sizes are as long as they're in
the list somewhere, so just move its entries towards the end as a
workaround.
MFC after: 1 month
Sponsored by: Chelsio Communicatons
Specifically, assume that the device is present if evaluation of _STA
method fails.
Before r330957 we ignored any _STA evaluation failure (which was
performed by AcpiGetObjectInfo in ACPICA contrib code) for the purpose
of acpi_DeviceIsPresent and acpi_BatteryIsPresent. ACPICA 20180313
removed evaluation of _STA from AcpiGetObjectInfo. So, we added
evaluation of _STA to acpi_DeviceIsPresent and acpi_BatteryIsPresent.
One important difference is that the new code ignored a failure only if
_STA did not exist (AE_NOT_FOUND). Any other kind of failure was
treated as a fatal failure. Apparently, on some systems we can get
AE_NOT_EXIST when evaluating _STA. And that error is not an evil twin
of AE_NOT_FOUND, despite a very similar name, but a distinct error
related to a missing handler for an ACPI operation region.
It's possible that for some people the problem was already fixed by
changes in ACPICA and/or in acpi_ec driver (or even in BIOS) that fixed
the AE_NOT_EXIST failure related to EC operation region.
This work is based on a great analysis by cem and an earlier patch by
Ali Abdallah <aliovx@gmail.com>.
PR: 227191
Reported by: 0mp
MFC after: 2 weeks
This allows tcpdump to capture outbound kernel packets while
in netmap mode
Submitted by: Marc de la Gueronniere <mdelagueronniere@verisign.com>
Reviewed by: vmaffione
MFC after: 1 week
Sponsored by: Verisign, Inc.
Differential Revision: https://reviews.freebsd.org/D17896
card initialization. This is an expanded version of r333682.
Break up prep_firmware into simpler routines while here. Load the
firmware/config KLD only if needed.
MFC after: 1 month
Sponsored by: Chelsio Communications
The backpressure indication is implemented using an unlimited rate type of
mbuf send tag. When the upper layers typically the socket layer has obtained such
a tag, it can then query the destination driver queue for the current
amount of space available in the send queue.
A single mbuf send tag may be referenced multiple times and a refcount has been added
to the mlx5e_priv structure to track its usage. Because the send tag resides
in the mlx5e_channel structure, there is no need to wait for refcounts to reach
zero until the mlx4en(4) driver is detached. The channels structure is persistant
during the lifetime of the mlx5en(4) driver it belongs to and can so be accessed
without any need of synchronization.
The mlx5e_snd_tag structure was extended to contain a type field, because there are now
two different tag types which end up in the driver which need to be distinguished.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
In order to enable HW LRO, both the "hw_lro" sysctl in the mlx5en(4) config
space must be set, and the ifconfig(8) LRO capability must be set. Any other
settings will disable HW LRO.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Add counter for all transmitted and received bytes. Currently only all
transmitted and received packets were counted. Fix description of RX LRO
counters while at it.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
By allocating the worst case size channel structure array
at attach time we can eliminate various NULL checks in the
fast path. And also reduce the chance for use-after-free
issues in the transmit fast path.
This change is also a requirement for implementing
backpressure support.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Writing to the debug stats variable must be locked,
else serialization will be lost which might cause
various kernel panics due to creating and destroying
sysctls out of order.
Make sure the sysctl context is initialized after freeing
the sysctl nodes, else they can be freed twice.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Inspect the ethernet compliance code to figure out actual cable type by reading
the PDDR module info register.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
This can happen when connections are short lived and leads to
a firmware error printout in dmesg, syndrome 0x51cfb0, because
the SQ is in the wrong state.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
1) Don't exceed the drivers own hardcoded TX inline limit.
The blueflame register size can be much greater than the hardcoded limit
for inlining. Make sure we don't exceed the drivers own limit, because this
also means that the maximum number of TX fragments becomes invalid and
then memory size assumptions in the TX path no longer hold up.
2) Make sure the mlx5_query_min_inline() function returns an error code.
3) Header inlining is required when using TSO.
4) Catch failure to compute inline header size for TSO.
5) Add support for UDP when computing inline header size.
6) Fix for inlining issues with regards to DSCP.
Make sure we inline 4 bytes beyond the ethernet and/or
VLAN header to workaround a hardware bug extracting
the DSCP field from the IPv4/v6 header.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The hardware queues are deep enough currently and using the DRBR and associated
callbacks only leads to more task switching in the TX path. The is also a race
setting the queue_state which can lead to hung TX rings.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Add support for setting the bandwidth limit as a ratio rather than in bits per
second. The ratio must be an integer number between 1 and 100 inclusivly.
Implement the needed firmware commands and SYSCTLs through mlx5en(4).
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Make sure the active width and speed is set in case the
translate_eth_proto_oper() function doesn't recognize the
current port operation mask.
Linux commit:
7672ed33c4c15dbe9d56880683baaba4227cf940
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
If the mlx5_ib_read_cong_stats() function was running when mlx5ib was unloaded,
because this function unconditionally restarts the timer, the timer can still
be pending after the delayed work has been cancelled. To fix this simply loop
on the delayed work cancel procedure as long as it returns non-zero.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Although "create_srq_user" does overwrite "in.pas" on some paths, it
also contains at least one feasible path which does not overwrite it.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
"fw_rev_min(dev->mdev)" with type "unsigned short" (16 bits, unsigned) is
promoted in "fw_rev_min(dev->mdev) << 16" to type "int" (32 bits, signed), then
sign-extended to type "unsigned long" (64 bits, unsigned). If
"fw_rev_min(dev->mdev) << 16" is greater than 0x7FFFFFFF, the upper bits of the
result will all be 1.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Driver description should be set by core and not by the Ethernet driver.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
A command is either polling or event driven and the mode cannot change
during execution of a command. Make sure the event handler only handle
commands which are not polled. This is done by checking the command mode
in the command handler before completing commands.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
This counter will represent transmitted packets which has more than
1518 octets.
The NIC has multiple hardware counters for counting transmitted
packets larger than 1518 octets. Each counter counts the packets
in specific range.
We accumulate those counters to have a single counter.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
When the mlx5 health mechanism detects a problem while the driver
is in the middle of init_one or remove_one, the driver needs to prevent
the health mechanism from scheduling future work; if future work
is scheduled, there is a problem with use-after-free: the system WQ
tries to run the work item (which has been freed) at the scheduled
future time.
Prevent this by disabling work item scheduling in the health mechanism
when the driver is in the middle of init_one() or remove_one().
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
All other mlx5_events report the port number as 1 based, which is how FW
reports it in the port event EQE. Reporting 0 for this event causes
mlx5_ib to not raise a fatal event notification to registered clients
due to a seemingly invalid port.
All switch cases in mlx5_ib_event that go through the port check are
supposed to set the port now, so just do it once at variable
declaration.
Linux commit:
aba462134634b502d720e15b23154f21cfa277e5
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The user can provide very large cqe_size which will cause to integer
overflow.
Linux commit:
28e9091e3119933c38933cb8fc48d5618eb784c8
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Copy small packets like TCP ACKs into a new mbuf
reusing the existing mbuf to receive a new ethernet
frame. This avoids wasting buffer space for
small sized packets.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Adding an interface might be done outside the device_attach() routine
and will then cause a panic, due to the VNET not being defined.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The "priv->pkstats.rx_dropped" is written twice in a row.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Also when the MTU is greater than MCLBYTES.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The hardware queues are deep enough currently and using the DRBR and associated
callbacks only leads to more task switching in the TX path. The is also a race
setting the queue_state which can lead to hung TX rings.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
In last mlx4 update (r325841) we lost the sysctl to show the
firmware version for mlx4 devices.
Add both board identifier and firmware version under:
sys.device.mlx4_core0.hw sysctl node.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Changelist:
- Replace netmap passthrough host support with a more general
mechanism to call TXSYNC/RXSYNC from an in-kernel event-loop.
No kernel threads are used to use this feature: the application
is required to spawn a thread (or a process) and issue a
SYNC_KLOOP_START (NIOCCTRL) command in the thread body. The
kernel loop is executed by the ioctl implementation, which returns
to userspace only when a different thread calls SYNC_KLOOP_STOP
or the netmap file descriptor is closed.
- Update the if_ptnet driver to cope with the new data structures,
and prune all the obsolete ptnetmap code.
- Add support for "null" netmap ports, useful to allocate netmap_if,
netmap_ring and netmap buffers to be used by specialized applications
(e.g. hypervisors). TXSYNC/RXSYNC on these ports have no effect.
- Various fixes and code refactoring.
Sponsored by: Sunny Valley Networks
Differential Revision: https://reviews.freebsd.org/D18015
Mark some buses as BUS_PASS_BUS, and some resources as BUS_PASS_RESOURCE.
This also decouples some resource attachment orderings from being races by
device tree ordering, instead relying on the bus pass to provide the
ordering.
This was originally intended to support multipass suspend/resume, but it's
also needed on PowerMacs when using fdt, as the device tree seems to get
created in reverse of the OFW tree.
Reviewed by: nwhitehorn (long ago)
Differential Revision: https://reviews.freebsd.org/D918
The object size is set in the dsp_mmap_single() which provides the
range limit by vm_fault().
Reported by: C Turt <ecturt@gmail.com>
Reviewed by: alc, markj
admbug: 781
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
The type represents byte offset in the vm_object_t data space, which
does not span negative offsets in FreeBSD VM. The change matches byte
offset signess with the unsignedness of the vm_pindex_t which
represents the type of the page indexes in the objects.
This allows to remove the UOFF_TO_IDX() macro which was used when we
have to forcibly interpret the type as unsigned anyway. Also it fixes
a lot of implicit bugs in the device drivers d_mmap methods.
Reviewed by: alc, markj (previous version)
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Early processing of a packet on transmit may change last seen
VLAN TCI in the queue context. If such a packet is eventually
dropped, last seen VLAN TCI must be set to its previous value.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18288
If an event handler requested an abort, only the inner loop was
guarenteed to be broken out of - the outer loop could continue
if total == batch.
Fix this by poisoning batch to ensure it is different to total.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18287
Revise the external port calculation to support all
X2 port modes. The previous algorithm could not
handle different port numbering schemes on each cage.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18285
Correct annotations where NULL input can be permitted
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18284
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18283
In efx_mcdi_phy_module_get_info() probe the
transceiver identification byte rather than assume
the module matches the fixed port type. This
supports scenarios such as a SFP mounted in a QSFP
port via a QSA module.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18282
Add a function which makes an MCDI GET_LINK request and
packages up the results. Currently, the get-link function
is triggered from several entry points which then pass
on or store selected parts of the data. When the driver
needs to obtain the current link state, it is more
efficient to do this in a single call.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18281
Previously only some of the code was guarded by this which caused
a build error when EFSYS_OPT_RX_SCALE is 0 (e.g. in manftest).
Submitted by: Tom Millington <tmillington at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18280
Limit the port mode bandwidth calculations by the maximum
reported link speed. This system detects 25G vs 10G cards,
and 100G port modes vs 40G.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18279
Change the interface to ef10_nic_get_port_mode_bandwidth()
so more NIC information can be used to infer bandwidth
requirements. Huntington calculations separated out
completely.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18278
Add cases for the new port modes supported by X2 NICs.
Lane bandwidth is calculated for pre-X2 cards so is an
underestimate for X2 in 25G/100G modes.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18277
>From Medford onwards, the newer constants enumerating
port modes should be used.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18276
Adjust data types in interface to permit the complete
module information buffer to be obtained in a single
call.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18275
Rearrange so the valid addresses are visible to the caller.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18274
Adjust bounds so the interface supports reading
the last available byte of data.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18273
This statistic should include 64byte and smaller frames.
Fix EF10 calculation to match Siena code.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18271
The capability bits to request FEC modes are implicitly valid
when the corresponding FEC mode is a supported capability.
Drivers expect that it is only valid to advertise those
capabilities explicitly marked as supported. The capabilities
reported by firmware is modified with the implicit capabilities
to present the explicit model to drivers.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18270
Client drivers may use either legacy flags, for example,
EFX_RX_HASH_TCPIPV4, or generalised flags, for example,
EFX_RX_HASH(IPV4_TCP, 4TUPLE), to configure RSS hash.
The libefx is able to recognise what scheme is used.
Legacy flags may be consumed directly by a chip-specific handler to
configure the NIC, that is, on EF10, these flags can be used to fill
in legacy RSS mode field in MCDI request. Generalised flags can also
be directly used in EF10-specific handler as they are fully compatible
with additional fields of the same MCDI request.
Legacy flags undergo conversion to generalised flags before they
are consumed by a chip-specific handler. This conversion is used to
make sure that chip-specific handlers expect only generalised flags
in the input for the sake of clarity of the code.
Depending on firmware capabilities, a chip-specififc handler either
supplies the input to the NIC directly, for example,
EFX_RX_HASH(IPV4_TCP, 4TUPLE) flag will enable 4 bits in
RSS_CONTEXT_SET_FLAGS_IN_TCP_IPV4_RSS_MODE field on EF10, or takes
the opportunity to translate the input to enable bits which don't map
to the generic flag, like setting
RSS_CONTEXT_SET_FLAGS_IN_TOEPLITZ_TCPV4_EN on EF10 when the firmware
claims no support for additional modes.
However, this approach has introduced a severe problem which can be
reproduced with ultra-low-latency firmware variant. In order to enable
IP hash, EF10-specific handler requires the user to request 2-tuple
hash for IP-other, TCP and UDP traffic classes, unconditionally.
In example, IPv4 hash can be enabled using the following input:
EFX_RX_HASH(IPV4_TCP, 2TUPLE) | EFX_RX_HASH(IPV4_UDP, 2TUPLE) |
EFX_RX_HASH(IPV4, 2TUPLE).
At the same time, on ultra-low-latency firmware, the common code will
never report support for any UDP tuple to the client driver. That is,
in the same example, the driver will use EFX_RX_HASH(IPV4_TCP, 2TUPLE) |
EFX_RX_HASH(IPV4, 2TUPLE). This input will not be recognised by
EF10-specific handler, and RSS_CONTEXT_SET_FLAGS_IN_TOEPLITZ_IPV4_EN
bit will not be set in the MCDI request.
In order to solve the problem, the patch removes conversion code
from chip-specific handlers and adds appropriate code to convert
EFX_RX_HASH() flags to their legacy counterparts to the common scale
mode set function. If the firmware does not support additional modes,
the function will convert generalised flags to legacy flags correctly
without any demand for UDP flags and pass the result to a chip-specific
handler.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18269
RSS mode bits can be accessed a lot easier in the hash
type value provided that the variable type is uint32_t.
The macro helper can be removed to enhance readability.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18268
The efx_rx_scale_hash_flags_get interface is unsafe, as it does not
have an argument for the size of the output buffer used to return
the flags. While the only caller currently supplies a sufficiently
large buffer, this should be checked at runtime to avoid writing
past the end of the buffer.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18267
The API which is used to list supported hash flags verifies
hash algorithm choice before writing the output. This check
is based on a switch() statement which has only two options
and no distinctive actions to be conducted for each of them.
Use simpler code instead of switch() to improve readability.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18266
NIC config is initialized during NIC probe.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18263
The efx_nic_hw_unavailable() checks ensure that if the NIC hardware
has failed or has been physically removed then libefx will stop
further attempts to access the hardware.
Add an interface for libefx clients to force unavailability, so the
hardware is treated as dead or removed even if still physically present.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18261
Add efx_nic_hw_unavailable() routine to check for hardware presence
before continuing with NIC operations.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18260
Introduce and use macro to make sure that MCDI buffers allocated
on stack are rounded up properly.
Submitted by: Gautam Dawar <gdawar at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18259
In SF bug 61297 it's been confirmed that the hardware does not always
calculate the TCP checksum correctly with TSO sends.
The value of the Total Length field (IPv4) or Payload Length field
(IPv6) is the critical factor. We're sufficiently confident that if
these fields are zero then the checksum will be calculated correctly.
The information may be used by the drivers to check if the workaround is
required when FATSOv2 is implemented.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18258
Found by PreFAST static analysis.
Submitted by: Martin Harvey <mharvey at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18257
The SFN driver's PartitionControl WMI object requires an API to parse
and filter partition data in TLV format, particularly for the Dynamic
Config partition. The ef10_nvram_buffer functions provide this
functionality but are tied to use with license partition only.
Modify functions so they are applicable to all TLV partitions and add
functions to support in-place tag modification.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18256
Extend efx_mcdi_get_port_modes() to optionally pass on the default
port mode field. This provides a more direct way of handling the case
where the dynamic config does not specify the port mode than the
alternative of a lookup table indexed by MCFW subtype.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18255
Functions to process the DHCP option list format used by the expansion
ROM config buffers, to support extracting and updating of individual
options.
The initial use case is the driver presenting the global and per-PF
options as separate items, with the driver implementing the
synchronization of global options across the configuration buffers
for all PFs.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18254
Submitted by: Martin Harvey <mharvey at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18253
Size of provided memory should be consistent with specified size.
Submitted by: Martin Harvey <mharvey at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18252
Description of sensors is generated from firmware sources.
Submitted by: Martin Harvey <mharvey at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18251
No need for probe messages when a TxQ is too full for a post to be done.
Existing drivers check if there is room in the queue before posting
descriptors, even though efx_tx_qdesc_post() does the check itself.
The new SFN Windows driver doesn't perform the check before calling
efx_tx_qdesc_post(), but that means these probes can get frequently
printed out. It's normal driver behaviour so there's no need to print
an error.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18250
Remove obsolete monitor types since Falcon SFN4000 series adapters
no longer supported by libefx.
Rename MCDI monitors to be consistent with YML.
The code may be simplified and generalized since only MCDI monitors
remain.
Submitted by: Martin Harvey <mharvey at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18249
Move empty definitions for platform-specific annotations from efsys.h
to EFX headers.
Submitted by: Martin Harvey <mharvey at solarflare.com>
Submitted by: Andrew Lee <alee at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18248
This fixes builds of kernels without INET6 such as LINT-NOINET6.
Reported by: arybchik
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D18384
ofw_bus_parse_xref_list_get_length doesn't returns the number of elements, fix this.
While here when setting the clock to the assigned freqeuncy, allow the clock
driver to round down or up the frequency as sometimes the exact frequency cannot
be obtain.
Add definitions of dynamic config and expansion ROM backup
partitions.
Submitted by: Paul Fox <pfox at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18247
Functions declared in mcdi_mon.h are implemented in mcdi_mon.c.
The build fails if compiler options require declaration before definition.
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18246
These stats are availble on Medford2 DPDK firmware variant
which support equal stride super-buffer Rx mode. RXDP_HLB_IDLE
capability bit is set when the stats are available.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18243
The mark value for MATCH_ACTION_MARK has a maximum value.
Requesting a value larger than the maximum will cause the
filter insertion to fail with EINVAL. This patch allows the
driver to check the value at the filter validation.
Submitted by: Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18240
This patch adds support for DPDK rte_flow "MARK" and "FLAG" filter
actions to filters on EF10 family NICs.
Submitted by: Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18239
Filter actions MARK and FLAG are supported on Medford2 by DPDK
firmware variant.
Submitted by: Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18238
Equal stride super-buffer Rx mode is supported by DPDK firmware
variant. One Rx descriptor provides many Rx buffers to firmware.
Rx buffers follow each other with specified stride.
Also it supports head of line blocking with timeout to address
drops when no Rx descriptors are available. So it gives extra time
to the driver to provide Rx descriptors before drop.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18236
The type is an internal interface. Single integer is insufficient
to carry RxQ type-specific information in the case of equal stride
super-buffer Rx mode (packet buffers per bucket, maximum DMA length,
packet stride, head of line block timeout).
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18234
Equal stride super-buffer is a new name instead of deprecated equal
stride packed stream to avoid confusion with previous packed stream.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18233
Packed stream firmware variant on EF10 adapters has a
number of properties which must be taken into account:
- Only one exclusive RSS context is available per port.
- Only IP addresses can contribute to the hash value.
Huntington and Medford have one more limitation which
is important for the drivers capable of packed stream:
- Hash algorithm is non-standard (i.e. non-Toeplitz).
This implies XORing together source + destination
IP addresses (or last four bytes in the case of IPv6)
and using the result as the input to a Toeplitz hash.
This patch provides a number of improvements in order
to treat the mentioned limitations in the common code.
If the firmware variant is packed stream, the list of
supported hash tuples will include less variants, and
the maximum number of RSS contexts will be set to one.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18232
Modern firmwares on EF10 adapters have support for
more traffic classes eligible for hash computation.
Also, it has become possible to adjust hashing per
individual class and select distinct packet fields
which will be able to contribute to the hash value.
This patch adds support for the mentioned features.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18231
Currently, libefx has no support for additional RSS modes
available with later controllers. In order to support this,
libefx should be able to list available hash configurations.
This patch provides basic infrastructure for the new interface.
The client drivers will be able to query the list of supported
hash configurations for a particular hash algorithm. Also, it
will be possible to configure hashing by means of new definitions.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18230
clang 4.0.1-6 on Ubuntu generates false positive warning that shift
is negative. It is done regardless of the fact that the branch is
not taken because of previous check.
The warning is generate in EFX_INSERT_NATIVE32 used by
EFX_INSERT_FIELD_NATIVE32. All similar cases are fixed as well.
It is undesirable to suppress the warning completely.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18229
Loopback type used as bit index has efx_loopback_type_t type
which is enum. clang complains that it is always true when it
is compared with qword (64 bit) bits number boundary.
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18228
If DPDK application or OS does not need checksumming on transmit,
it may be disabled in firmware to achieve higher packet rates.
Choice must be done before VIS allocation and is allowed if
no other non-preboot and firmware subvariant-unaware drivers are
attached.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18227
FW subvariants allow to tweak NIC global features. For example,
if no drivers require checksumming on transmit, it may be disabled
in FW to increase packet rate.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18225
Submitted by: Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18223
Add support for filters which drop packets when forming MCDI request
for a filter.
Submitted by: Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18221
Add filter match flag to distinguish filters applied only to
encapsulated packets.
Match flags set should allow to determine whether a filter
is supported or not. The problem is that if specification
has supported set outer match flags and specified
encapsulation without any inner flags, check says that it
is supported, and filter insertion is performed. However,
there is no filtering of the encapsulated traffic. A new
flag is added to solve this problem and separate the
filters for the encapsulated packets.
Submitted by: Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18220
This supports VNI/VSID and inner frame local MAC fields to
match in VXLAN, GENEVE, or NVGRE packets.
Submitted by: Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18218
This adds filters for encapsulated packets to the list
returned by ef10_filter_supported_filters().
Submitted by: Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18217
Regenerate MCDI and TLV layout headers from firmwaresrc to
pick up DPDK firmware variant and related Rx queue and filtering
extensions.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18216
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18215
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18214
- Store the clip table in 'struct adapter' instead of in the TOM softc.
- Init the clip table during attach and teardown during detach.
- While here, add a dev.<nexus>.<unit>.misc.clip sysctl to dump the
CLIP table.
This does mean that we update the clip table even if TOE is not enabled,
but non-TOE things need the CLIP table anyway.
Reviewed by: np, Krishnamraju Eraparaju @ Chelsio
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D18010
The first packet after the ring is initialized was never
completed as isc_txd_credits_update() would not include it in the
count of completed packets. This caused netmap to never complete
a batch. See PR 233022 for more details.
This is the same fix as the r340310 for e1000
PR: 233607
Reported by: lev
Reviewed by: lev
MFC after: 3 days
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D18368
After the fix contained in r341144, cxgbe does not need anymore
to set the IFCAP_NETMAP flag manually.
Reviewed by: np
Approved by: gnn (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17987
Revision r307394 removed (by mistake) the code that sets IFCAP_NETMAP
in if_capabilities on netmap_attach. This patch reverts this change.
Reviewed by: np
Approved by: gnn (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17987
Set outer_ip_id in the TX option descriptor for encapsulated packets.
Submitted by: Vijay Srivastava <vijays at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18213
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18211
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18210
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18207
Document the TX_EV_TYPE used for TX completion events corresponding
to CTPIO sends.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18206
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18205
Either cut-through or store-and-forward mode.
Submitted by: Guido Barzini <gbarzini at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18204
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18203
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18202
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18201
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18200
New port mode names are defined for Medford2 and later, and
the existing names are aliased to them. Add comments with the
numeric port mode to clarify the external port modes table.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18199
The event timer interface has changed for Medford2 - for
details see bug66418 comment 9. Update the common code to
use the new timer semantics for Medford2.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18198
Medford2 controllers support control and reporting of
FEC modes for 25G and higher links. See SF-109306-TC
for suggested usage in client code.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18197
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18196
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18195
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18194
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18193
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18192
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18191
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18190
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18189
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18188
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18187
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18186
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18185
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18184
The warning says that it may be usage of possibly uninitialized value.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18183
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18182
The RX_ECC_ERR flag in RX events was misnamed, as it
reported frame truncation. Use the new RX_TRUNC_ERR
name for this flag.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18181
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18180
Decode Medford2 FEC stats if available in MAC stats DMA buffer.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18178
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18177
On Medford2 and later the MAC stats buffer has been enlarged.
Use the MAC stats DMA buffer size to ensure that the stats END
generation count is read from the correct location, and that
over-reading of the DMA buffer is prevented.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18176
For Medford2 the DMA buffer used for one-shot or periodic MAC stats
has been extended. Ensure the MAC stats DMA buffer size is large
enough to hold the number of stats counters supported by firmware.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18175
Previously the code relied on the callers of efx_mcdi_mac_stats
to provide a DMA buffer or NULL depending on the action. Fix
this so that the DMA buffer is only passed in the request when
needed, and that an error is reported for a missing DMA buffer.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18174
