Commit Graph

68 Commits

Author SHA1 Message Date
Li-Wen Hsu
8ff21c23a5 Add RISC-V support for truss(1)
While here, extract NARGREG as a definition.

Reviewed by:	br
Differential Revision:	https://reviews.freebsd.org/D9249
2017-01-24 09:41:44 +00:00
Ruslan Bukin
250b1bf3c5 Disable superpages reservations as we don't have implemented them yet.
Requested by:	Alan Cox <alc@rice.edu>
Sponsored by:	DARPA, AFRL
2016-11-21 12:00:31 +00:00
Ruslan Bukin
7804dd5212 Add full softfloat and hardfloat support for RISC-V.
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).

Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D8529
2016-11-16 15:21:32 +00:00
Ruslan Bukin
71e35b7da8 Check if L2 entry exists for the given VA before loading L3 entry.
This is a fix for a panic that was easy to reproduce executing
"(/bin/ls &)" in the shell.

Sponsored by:	DARPA, AFRL
2016-11-14 18:30:03 +00:00
Ruslan Bukin
426b08bcd3 System Binary Interface (SBI) page was moved in latest version of
Berkeley Boot Loader (BBL) due to code size increase.

We will need to dehardcode this somehow.

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-11-04 13:07:54 +00:00
Ruslan Bukin
2ad1d09f16 o Add support for long double.
o Add support for latest RISC-V GNU toolchain.

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-11-03 13:06:17 +00:00
Andriy Voskoboinyk
7453645f2a rtwn(4), urtwn(4): merge common code, add support for 11ac devices.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
 * for RTL8821AU: 2 VAPs at the same time;
 * other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
 * bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
 * common (if_rtwn*)
 * chip-specific (rtl*/*)
- various other bugfixes.

Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn  rtwnfw  -> rtwn rtwn_pci rtwnfw

Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.

Tested by:	kevlo, garga,
		Peter Garshtja <peter.garshtja@ambient-md.com>,
		Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
		Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
		<otacilio.neto@bsd.com.br>
Relnotes:	yes
2016-10-17 20:38:24 +00:00
Warner Losh
b2a7ac4802 Fix building on i386 and arm. But 'public domain' headers on the files
with no creative content. Include "lost" changes from git:
o Use /dev/efi instead of /dev/efidev
o Remove redundant NULL checks.

Submitted by: kib@, dim@, zbb@, emaste@
2016-10-13 06:56:23 +00:00
Jonathan T. Looney
bd79708dbf In the TCP stack, the hhook(9) framework provides hooks for kernel modules
to add actions that run when a TCP frame is sent or received on a TCP
session in the ESTABLISHED state. In the base tree, this functionality is
only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,
and cc_vegas congestion control modules.

Presently, we incur overhead to check for hooks each time a TCP frame is
sent or received on an ESTABLISHED TCP session.

This change adds a new compile-time option (TCP_HHOOK) to determine whether
to include the hhook(9) framework for TCP. To retain backwards
compatibility, I added the TCP_HHOOK option to every configuration file that
already defined "options INET". (Therefore, this patch introduces no
functional change. In order to see a functional difference, you need to
compile a custom kernel without the TCP_HHOOK option.) This change will
allow users to easily exclude this functionality from their kernel, should
they wish to do so.

Note that any users who use a custom kernel configuration and use one of the
congestion control modules listed above will need to add the TCP_HHOOK
option to their kernel configuration.

Reviewed by:	rrs, lstewart, hiren (previous version), sjg (makefiles only)
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D8185
2016-10-12 02:16:42 +00:00
Warner Losh
943ac2b07e Include stubs even on the platforms we don't support so libsysdecode
continues to build.
2016-10-11 22:54:29 +00:00
Alan Cox
8cb0c1029d Various changes to pmap_ts_referenced()
Move PMAP_TS_REFERENCED_MAX out of the various pmap implementations and
into vm/pmap.h, and describe what its purpose is.  Eliminate the archaic
"XXX" comment about its value.  I don't believe that its exact value, e.g.,
5 versus 6, matters.

Update the arm64 and riscv pmap implementations of pmap_ts_referenced()
to opportunistically update the page's dirty field.

On amd64, use the PDE value already cached in a local variable rather than
dereferencing a pointer again and again.

Reviewed by:	kib, markj
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D7836
2016-09-10 16:49:25 +00:00
Mark Johnston
dbbaf04f1e Remove support for idle page zeroing.
Idle page zeroing has been disabled by default on all architectures since
r170816 and has some bugs that make it seemingly unusable. Specifically,
the idle-priority pagezero thread exacerbates contention for the free page
lock, and yields the CPU without releasing it in non-preemptive kernels. The
pagezero thread also does not behave correctly when superpage reservations
are enabled: its target is a function of v_free_count, which includes
reserved-but-free pages, but it is only able to zero pages belonging to the
physical memory allocator.

Reviewed by:	alc, imp, kib
Differential Revision:	https://reviews.freebsd.org/D7714
2016-09-03 20:38:13 +00:00
Ruslan Bukin
9862cef040 o Separate rtc and timecmp registers: they are different across
RISC-V cpu implementations.
o Update RocketChip device tree source (DTS).

We now support latest verison of RocketChip synthesized on
Xilinx FPGA (Zedboard).

RocketChip is an implementation of RISC-V processor written on
Chisel hardware construction language.

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-09-01 14:58:11 +00:00
Ruslan Bukin
5f8228b2f3 o Remove operation in machine mode.
Machine privilege level was specially designed to use in vendor's
  firmware or bootloader. We have implemented operation in machine
  mode in FreeBSD as part of understanding RISC-V ISA, but it is time
  to remove it.
  We now use BBL (Berkeley Boot Loader) -- standard RISC-V firmware,
  which provides operation in machine mode for us.
  We now use standard SBI calls to machine mode, instead of handmade
  'syscalls'.
o Remove HTIF bus.
  HTIF bus is now legacy and no longer exists in RISC-V specification.
  HTIF code still exists in Spike simulator, but BBL do not provide
  raw interface to it.
  Memory disk is only choice for now to have multiuser booted in Spike,
  until Spike has implemented more devices (e.g. Virtio, etc).

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-08-10 12:41:36 +00:00
Ruslan Bukin
98f50c44e3 Update RISC-V port to Privileged Architecture Version 1.9.
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-08-02 14:50:14 +00:00
Konstantin Belousov
5c2cf81845 Update comments for the MD functions managing contexts for new
threads, to make it less confusing and using modern kernel terms.

Rename the functions to reflect current use of the functions, instead
of the historic KSE conventions:
  cpu_set_fork_handler -> cpu_fork_kthread_handler (for kthreads)
  cpu_set_upcall -> cpu_copy_thread (for forks)
  cpu_set_upcall_kse -> cpu_set_upcall (for new threads creation)

Reviewed by:	jhb (previous version)
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
Approved by:	re (hrs)
Differential revision:	https://reviews.freebsd.org/D6731
2016-06-16 12:05:44 +00:00
Ruslan Bukin
e933649fb9 Remove duplicate define. 2016-06-08 13:57:18 +00:00
Ruslan Bukin
03e4a374c4 Fix typos. 2016-06-02 15:14:40 +00:00
Ruslan Bukin
99ea4d4733 Add support for loadable kernel modules.
Submitted by:	Yukishige Shibata <y-shibat@mtd.biglobe.ne.jp>
2016-06-01 14:12:31 +00:00
Ruslan Bukin
22d5f3540a * Enable KDTRACE options as we support DTrace now.
* Add bpf device to kernel config.
2016-06-01 12:19:00 +00:00
Ruslan Bukin
6f397ac71b Increase the size and alignment of the setjmp buffer.
This is required for future CPU extentions.

Reviewed by:	brooks
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-05-26 10:03:30 +00:00
Ruslan Bukin
fed1ca4b71 Add initial DTrace support for RISC-V.
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-05-24 16:41:37 +00:00
Ruslan Bukin
892933d079 Store the original value of stack pointer to the exception frame
(the value we had before supervisor exception occurred).
This helps consumers (e.g. DTrace) to not proceed additional calculations.

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-05-24 13:59:13 +00:00
Alan Cox
d3ffaee8e6 Eliminate an unused #include. For a brief period of time, _unrhdr.h was
used to implement PCID support on amd64.

Reviewed by:	kib
2016-05-13 20:14:41 +00:00
Ruslan Bukin
9af9422682 Rework the list of all pmaps: embed the list link into pmap. 2016-04-26 14:38:18 +00:00
Ruslan Bukin
3f8f5599a3 o Add device tree files and kernel configuration files
for RISC-V cpus synthesized on FPGA hardware.
o Include new files to the build.
2016-04-26 13:22:08 +00:00
Ruslan Bukin
00106e52c2 Add the non-standard "IO interrupt" vector used by lowRISC.
For now they provide UART irq only.

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-04-26 12:56:44 +00:00
Ruslan Bukin
6c0d33bcb3 Add the implementation of basic bus_space_read/write functions.
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-04-26 12:45:01 +00:00
Ruslan Bukin
63270b0b65 Add the implementation of OF_decode_addr(). 2016-04-26 12:33:25 +00:00
Ruslan Bukin
30b72b6871 Move arm's devmap to some generic place, so it can be used
by other architectures.

Reviewed by:	imp
Differential Revision:	https://reviews.freebsd.org/D6091
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-04-26 11:53:37 +00:00
Ruslan Bukin
02a371289a o Implement shared pagetables and switch from 4 to 3 levels page
memory system.

RISC-V ISA has only single page table base register for both kernel
and user addresses translation. Before this commit we were using an
extra (4th) level of pagetables for switching between kernel and user
pagetables, but then realized FPGA hardware has 3-level page system
hardcoded. It is also become clear that the bitfile synthesized for
4-level system is untested/broken, so we can't use extra level for
switching.

We are now share level 1 of pagetables between kernel and user VA.
This requires to keep track of all the user pmaps created and once we
adding L1 page to kernel pmap we have to add it to all the user pmaps.

o Change the VM layout as we must have topmost bit to be 1 in the
  selected page system for kernel addresses and 0 for user addresses.
o Implement pmap_kenter_device().
o Create the l3 tables for the early devmap.

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-04-25 14:47:51 +00:00
Ruslan Bukin
21e2c118b8 Do not setup machine exception vector.
Sounds strange, but both RocketCore and lowRISC do not operate
if we set it.

All the known implementations (Spike, QEMU, RocketCore, lowRISC) uses
default machine trap vector address and operates fine with this.

Original Berkeley Boot Loader (bbl) does not set this as well.

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-04-25 13:30:37 +00:00
Ruslan Bukin
f8f69c9385 Revert r298477 ("Clear the DDR memory").
There is no need to clear all the DDR memory (we only need to clear
BSS section).
I was playing with non-default version of hardware (the bitfile
synthesized for 4-level page memory system) and clearing was helpful,
but then realized support for 4-level page system is untested/broken
in both RocketCore and lowRISC.
2016-04-25 13:20:57 +00:00
Ruslan Bukin
ce2b4fcfb9 Clear the DDR memory. This should be done by bootloaders,
but they have no such feature yet.

This fixes operation on Rocket Core and lowRISC.
2016-04-22 16:15:58 +00:00
Ruslan Bukin
fd3dc9f439 Add memory barriers (fence instructions) so the data wrotten by hardware
to physical address now can be read by VA.

This fixes operation on Rocket Core (FPGA).

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-04-22 15:12:05 +00:00
Ruslan Bukin
6c1838e37e Correct the event queue initialization.
This fixes operation on Rocket Core.

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-04-22 15:04:46 +00:00
Pedro F. Giffuni
b93c97c14a risc-v: for pointers replace 0 with NULL.
These are mostly cosmetical, no functional change.

Found with devel/coccinelle.
2016-04-14 17:25:50 +00:00
Ruslan Bukin
d52d6d7ca7 Add support for ddb(4).
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-03-10 15:51:43 +00:00
Andrew Turner
a43760692b Make the fdt_get_mem_regions memsize argument optional. It's only used in
by a few callers.

Sponsored by:	ABT Systems Ltd
2016-03-01 09:45:27 +00:00
Justin Hibbits
e665eafb25 Correct the memory rman ranges to be to BUS_SPACE_MAXADDR
Summary:
As part of the migration of rman_res_t to be typed to uintmax_t, memory ranges
must be clamped appropriately for the bus, to prevent completely bogus addresses
from being used.

This is extracted from D4544.

Reviewed By: cem
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5134
2016-03-01 02:59:06 +00:00
Wojciech Macek
e571e15cb0 Fix fdt_get_mem_regions() to work with 64-bit addresses
Use u_long instead of uint32_t variables to avoid overflow
    in case of PA space bigger than 32-bit.

Obtained from:         Semihalf
Submitted by:          Michal Stanek <mst@semihalf.com>
Sponsored by:          Annapurna Labs
Approved by:           cognet (mentor)
Reviewed by:           andrew, br, wma
Differential revision: https://reviews.freebsd.org/D5393
2016-02-29 09:22:39 +00:00
Ruslan Bukin
14232d424d o Use uint64_t for page number as it doesn't fit uint32_t.
o Implement growkernel bits for L1 level of pagetables.

This allows us to boot with 128GB of physical memory.

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-02-26 14:04:00 +00:00
Ruslan Bukin
17696c12f5 Add support for symmetric multiprocessing (SMP).
Tested on Spike simulator with 2 and 16 cores (tlb enabled),
so set MAXCPU to 16 at this time.

This uses FDT data to get information about CPUs
(code based on arm64 mp_machdep).

Invalidate entire TLB cache as it is the only way yet.

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-02-24 16:50:34 +00:00
Ruslan Bukin
cea32c0742 o Grab physical memory regions information from the device tree.
o Increase memory size.
2016-02-23 14:21:46 +00:00
Ruslan Bukin
e1b6d4a9f4 Add basic trap handlers for illegal instruction and breakpoint
exceptions.
2016-02-22 14:54:50 +00:00
Ruslan Bukin
041c26e7ff Fix comment. 2016-02-22 14:19:45 +00:00
Ruslan Bukin
c7977d4cee Remove duplicates. 2016-02-22 14:13:05 +00:00
Ruslan Bukin
0b7bfc0beb Provide stack(9) MD stubs for RISC-V so ktr(9) can be compiled in. 2016-02-22 14:01:46 +00:00
Ruslan Bukin
dfb5ca561e Fix ktrace call. 2016-02-22 13:52:08 +00:00
Svatopluk Kraus
35a0bc1260 As <machine/vmparam.h> is included from <vm/vm_param.h>, there is no
need to include it explicitly when <vm/vm_param.h> is already included.

Suggested by:	alc
Reviewed by:	alc
Differential Revision:	https://reviews.freebsd.org/D5379
2016-02-22 09:08:04 +00:00