both telnet and telnetd aren't that useful nowadays but some
might want them.
Create a FreeBSD-telnet package so users have a choice to have
them or not.
Differential Revision: https://reviews.freebsd.org/D31791
Reviewed by: emaste
Several functions in the driver code have a weird function comment
formatting which uses two spaces instead of only one space for the main
function body.
This formatting will be mechanically fixed by sed in a future patch, but
doing so leads to some spelling warnings on that patch. Cleanup the
spelling mistakes that will be detected first. This way, it is easier to
verify the mechanical transformation done by sed in the following patch.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (fc75eee32037c1379e77e57031c1c353badd2272)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
This patch is for restarting auto negotiation on PHY.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (664ea2614eafbec8eda5c86764ff047475a1e5c6)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
The retry variable was being incremented before it was evaluated by the
subsequent conditional against the maximum retries to figure out which
message to print. So we'll move the increment op to the end.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (390445ec30b4c52a3d2887c3d2a202d9cf37ea8e)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
Remove unnecessary extra whitespace on all function comments, replacing
' * ' with ' * '.
This was done automatically via sed using the following transformation:
sed 's/^ \* / * /'
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (40023f73c76579e58a859dab87b4c30278eb2e48)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
Synced to the ixgbe shared code with DPDK shared code which has local
fixes on top of "not-released-cid-ixgbe.2020.06.09.tar.gz"
Approved by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
The question around getting rid of the assignments seems lived
long enough, if they are not needed until now, we can drop them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: imp
Obtained from: DPDK (a6395d471e14e5a7432875dad8fb3533238c5167)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
After setting up the link on x552/X557-AT 10GBASE-T NICs, sometimes the
link does not get set up properly and as a result all the subsequent
calls to ixgbe_check_link() from ixgbe_dev_link_update_share() fail.
Introduce a delay time of 1s in ixgbe_setup_mac_link_t_X550em() before
beginning to set up the external PHY link speed to ensure that the
controller can acquire the link.
Signed-off-by: Ashijeet Acharya <ashijeet.acharya@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: imp
Obtained from: DPDK (d31b95860d8e9dd7c6e242bd08baaac00a9714f0)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
While sending request using ixgbe_hic_unlocked() the data field in
buffer struct is not used. It is set when the struct is overwritten by
FW to deliver the response. To not pass random data to FW the whole
structure should be zeroed before use.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (40543be5376ca415b2a7e196315d0555725b8bdf)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
With the NVM image for x550em XFI will not report
the auto-negotiation feature correctly. The auto-negotiation
should be "No" for supports and advertised items.
At the same time update speed makes it support 1G and 10G.
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (fb03b51da940f1d56d701776fd85a0dfc1ace098)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
As the code has changed the max wait time to 1000ms, the comment should
be changed accordingly.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: imp
Obtained from: DPDK (73247f1ced303c16987bb366d38a2d8a0fc40db4)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
After setting up the link on a fiber port, the maximum wait time for
the link to come up is 500 ms in ixgbe_setup_mac_link_multispeed_fiber().
On an x550 SFP+ port, this is often not sufficiently long for the link
to come up. This can result in never being able to retrieve accurate
link status for the port using rte_eth_link_get_nowait().
Increase the maximum wait time in ixgbe_setup_mac_link_multispeed_fiber()
to 1 s.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: imp
Obtained from: DPDK (64f1c8539c8ce99214b9eb1fb728a2c6745f3300)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
For the "Apply Update" command the firmware does not
given an response. For this command, success should
be return.
Signed-off-by: Mateusz Kowalski <mateusz.kowalski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (03b09c71c0c6c516ce05cad8e8aa75e8b9e14fba)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
On ESXi OS, when user disables auto negotiation, the following log
appears: "(unsupported) Flow control autoneg is disabled".
It is true that auto negotiation is disabled but it is
not necessarily true that it is not supported.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (ab6ac48d483ef7f906b90f45182f2ddf3254d876)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
In some corner cases the functions ixgbe_clear_rar_generic and
ixgbe_clear_vmdq_generic may call one another leading to infinite
recursion.
When ixgbe_clear_vmdq_generic is called with IXGBE_CLEAR_VMDQ_ALL
flag, it's going to clear MPSAR registers, and proceed to call
ixgbe_clear_rar_generic, which in turn will clear the RAR registers,
and recursively call back ixgbe_clear_vmdq_generic. Normally, the
latter would detect that MPSAR registers have already been cleared
and terminate the recursion.
However, when PCIe link is down, and before the driver has had the
opportunity to shut itself down, all register reads return 0xFFFFFFFF,
and all register writes fail silently. In such case, because
ixgbe_clear_vmdq_generic blindly assumes that clearing MPSAR registers
succeeded, it's going to always call ixgbe_clear_rar_generic, which
in turn will always call back ixgbe_clear_vmdq_generic, creating
infinite recursion.
This patch re-reads MPSAR register values after they had been cleared.
In case of PCIe link failure, the values read will be non-zero, which
will terminate the recursion. On the other hand, under normal
circumstances the value read from MPSAR registers is going to be equal
to the value previously written, so this patch is expected not to cause
any regressions.
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (2d04b9e856125197ec8e967471426d56ab7efcf0)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
ixgbe devices support up to 8 Rx and Tx queues per virtual function.
Currently, the registers of only seven queues are set to default when
resetting a VF.
Signed-off-by: Simon Ellmann <simon.ellmann@tum.de>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Approved by: imp
Obtained from: DPDK (d2565b347915def3a0f3c68bde6824acf096a0e6)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
Otherwise return from the syscall and next syscall, which could be
kevent(2) on the kqueue that should be notified, races with the kqueue
taskqueue thread, and potentially misses the wakeup. This is reliably
visible when kevent(2) only peeks into events using zeroed timeout.
PR: 258310
Reported by: arichardson, Jan Kokemüller <jan.kokemueller@gmail.com>
Reviewed by: arichardson, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31858
With the new FIB_ALGO infrastructure, nearly all subsystems use
fib[46]_lookup() functions, which provides lockless lookups.
A number of places remains that uses old-style lookup functions, that
still requires RIB read lock to return the result. One of such places
is arp processing code.
FIB_ALGO implementation makes some tradeoffs, resulting in (relatively)
prolonged periods of holding RIB_WLOCK. If the lock is held and datapath
competes for it, the RX ring may get blocked, ending in traffic delays and losses.
As currently arp processing is performed directly in the interrupt handler,
handling ARP replies triggers the problem descibed above when the amount of
ARP replies is high.
To be more specific, prior to creating new ARP entry, routing lookup for the entry
address in interface fib is executed. The following conditions are the verified:
1. If lookup returns an empty result, or the resulting prefix is non-directly-reachable,
failure is returned. The only exception are host routes w/ gateway==address.
2. If the routing lookup returns different interface and non-host route,
we want to support the use case of having multiple interfaces with the same prefix.
In fact, the current code just checks if the returned prefix covers target address
(always true) and effectively allow allocating ARP entries for any directly-reachable prefix,
regardless of its interface.
Change the code to perform the following:
1) use fib4_lookup() to get the nexthop, instead of requesting exact prefix.
2) Rewrite first condition check using nexthop flags (1:1 match)
3) Rewrite second condition to check for interface addresses matching target address on
the input interface.
Differential Revision: https://reviews.freebsd.org/D31824
Reviewed by: ae
MFC after: 1 week
PR: 257965
As reported by Ronald, adding the out-of-line LSE atomics helpers for
aarch64 to compiler-rt was not sufficient to link programs using these,
as they also require a __aarch64_have_lse_atomics global. This is
initialized in compiler-rt's lib/builtins/cpu_model.c, roughly similar
to the x86 CPU model and feature detection in that file.
Since upstream does not yet have a FreeBSD specific implementation for
getting the required information, add a simple one that should work for
now, while I try to get it sorted with the LLVM people.
Reported by: Ronald Klop <ronald-lists@klop.ws>
Fixes: cc55ee8009
PR: 257392
MFC after: 2 weeks
Summary:
From Steve Kargl:
Paul Zimmermann has identified a bug in Openlibm's powf(),
which is identical to FreeBSD's libm. Both derived from
fdlibm. https://github.com/JuliaMath/openlibm/issues/212.
Consider
% cat h.c
int
main(void)
{
float x, y, z;
x = 0x1.ffffecp-1F;
y = -0x1.000002p+27F;
z = 0x1.557a86p115F;
printf("%e %e %e <-- should be %e\n", x, y, powf(x,y), z);
return 0;
}
% cc -o h -fno-builtin h.c -lm && ./h
9.999994e-01 -1.342177e+08 inf <-- should be 5.540807e+34
Reviewers: manu
Subscribers: imp, andrew, emaste
Differential Revision: https://reviews.freebsd.org/D31865
git-rev-list expects commits to be listed separately, allow word
splitting and disable shellcheck SC2086 when using git-rev-list
to build the commit list.
Fixes: 4fd0c6ab1a ("Fix most shellcheck warnings in git-arc.sh")
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D31838
The purpose of this command is to "refresh" the source reference
files generated with GNU libiconv, located in tools/test/iconv/ref/.
Previously it would generate copies somewhere in OBJDIR, which
we don't use.
Reviewed By: allanjude
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31820
Previously it would loop indefinitely on getopt_long(3)
due to 'char' being unsigned.
Reviewed By: allanjude
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31817
ASan will not be able to provide backtraces with symbol names with
elftoolchain's addr2line. To fix this turn MK_LLVM_BINUTILS on by
default when ASan instrumentation is requested.
Reviewed By: emaste, markj
Differential Revision: https://reviews.freebsd.org/D31061
When WITH_LLVM_BINUTILS is set, we will install the LLVM binutils as
ar/ranlib/nm/objcopy/etc. instead of the elftoolchain ones.
Having the LLVM binutils instead of the elftoolchain ones allows us to use
features such as LTO that depend on binutils that understand LLVM IR.
Another benefit will be an improved user-experience when compiling with
AddressSanitizer, since ASAN does not symbolize backtraces correctly if
addr2line is elftoolchain addr2line instead of llvm-symbolizer.
See https://lists.freebsd.org/archives/freebsd-toolchain/2021-July/000062.html
for more details.
This is currently off by default but will be turned on by default at some
point in the near future.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D31060
The tablegen binaries are only needed to build software that uses
LLVM's infrastructure for command line options,
disassembler tables, etc. They are not user-facing binaries and
should therefore not be installed by default.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D31058
When building -DWITH_LLVM_BINUTILS -DWITHOUT_CLANG, this avoids
building a few hundred C++ source files that should not be needed
by default.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D31059
The 'intr_config_hooks' SYSINIT is now taking a nontrivial amount of
time in my profiling; run_interrupt_driven_config_hooks is responsible
for most of it, so this adds useful information to the resulting
flamecharts.
None of the drivers really implement asynchronous buffer loading, so
they don't need lock there. The only question is which of them have
BUS_DMA_NOWAIT flag there already, and to which it should be added.
