Commit Graph

1181 Commits

Author SHA1 Message Date
Peter Wemm
684fb19e34 Extract a list of extra isa pnp modem ID's from NetBSD and OpenBSD. Some
of these are bound to have a PNP05xx compatid, but there's no easy way to
tell.  Since it's just an ID list and uses the pnp header's description
strings rather than encoding strings here, it doesn't seem to be too
expensive to err on the safe side.
1999-12-21 09:16:03 +00:00
Joerg Wunsch
e34c71ea40 Add a flag to disable FIFO probing. The code seems to have a chance of
misdetecting FIFO capabilities, at least on my girlfriend's Thinkpad 755,
the driver doesn't work using the FIFO.

While i was at it, i (partially) fixed option FCC_YE since it would no
longer have compiled at all under -current.  I've also made an attempt
to document the device driver flags value (ab-)used internally by this
option.

RELENG_3 candidate, but with a slightly different patch there (will go
to jkh in email).
1999-12-21 08:33:03 +00:00
Peter Wemm
99c215c08b Add SUP2070 (Diamond SupraExpress 56i)
Submitted by:  Kenneth Wayne Culver <culverk@wam.umd.edu>

Add MOT4560
Obtained from: wollman
1999-12-20 20:31:23 +00:00
Peter Wemm
ec6e462d78 Remove references to register_intr() etc in comments. 1999-12-20 15:11:31 +00:00
Yoshihiro Takahashi
5e9136bbe2 Removed unnecessary include files. 1999-12-20 12:08:20 +00:00
Kazutaka YOKOTA
273157da59 - Add the device resume method. It supercedes the existing resume
routine which hooks the apm driver.
- Rename the PSM_HOOKAPM option to PSM_HOOKRESUME.
- Delete unnecessary #include.
1999-12-15 10:04:05 +00:00
Peter Wemm
d00177ef7e Make this kld'able (#include "joy.h" no longer required as there are no
references to NJOY any more after newbusification)
1999-12-12 20:39:35 +00:00
Warner Losh
0712c356a3 o Make pccard work at all by including card.h
o fix return type of sio_pccard_detach
o don't free softc in deatch, since that is done by newbus
o disconnect interrupt we used to have.  Add cookie to com so that we can
  tear down the interrupt on unload
o Set gone earlier, but likely doesn't matter

This makes sio pccards work again.  Cards that are active when ejects may
not work (but they might, softc goes away quickly).

These changes are unreviewed by bde.  I'll make any style changes he wants.
1999-12-10 08:19:19 +00:00
Peter Wemm
4246912f31 Fix a pair of silly warnings that I introduced (that would have been
nasty on an Alpha or some other sizeof(int) != sizeof(long) machine).
1999-12-06 17:52:20 +00:00
Peter Wemm
a2639a184d Add a truely evil workaround (hack!) for some unfortunate BIOS
programming practices.  It seems that newer fdc chips have an
alternative way of setting the transfer speed (including high speed
modes for floppy tape) that doesn't use the control register (which
we don't support - we use the old way only).  So, they (the BIOS
programmers) sometimes leave out the 0x3f6 control register from
the PnP ports descriptor(!!).  "Hey, it works with windows, so
what's the problem?" :-(  Anyway, this hack tries to compensate
for that.  This was discussed with dfr (who did the pnp attachment).
1999-12-06 06:59:09 +00:00
Peter Wemm
d0029cf5f3 Use bus_get_resource() instead of bus_get_resource_start() as the latter
returns "0" on failure, which is indistinguishable from (say) irq 0.  This
should stop a couple of stray messages that turn up.

Also, if a BUS_SETUP_INTR() fails with INTR_TYPE_FAST, try falling back to
a normal interrupt.  This might help pccard folks with a shared slot
interrupt.  This whole thing needs to be revisited.
1999-12-06 06:47:02 +00:00
Peter Wemm
2533e89e3b newbusify and port the joy driver to the Alpha. It now attaches to the
joystick port on PnP sound cards that have a suitable device ID on them.

Doug Rabson added timer code so it didn't have to beat on the isa timer.

Submitted by:   Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp>
1999-12-05 19:51:40 +00:00
Matthew N. Dodd
fe0d408987 Remove the 'ivars' arguement to device_add_child() and
device_add_child_ordered().  'ivars' may now be set using the
device_set_ivars() function.

This makes it easier for us to change how arbitrary data structures are
associated with a device_t.  Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.

Despite my best efforts I've probably forgotten something so let me know
if this breaks anything.  I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.

Reviewed by:	peter, dfr
1999-12-03 08:41:24 +00:00
Warner Losh
e09f49b6fa Fix the hang on card eject problem and maybe the hang on suspend
problem.

o Create new timeout routine so we don't detach the card inside a ISR
  but instead drop back to spl0 via a timeout of 0.
o Actually delete the child of the pccard device rather than just faking
  it badly.
o Fix sio, ed and ep to have pccard detach routines that are int rather
  than void.
o Fix ep and ed pccard detach routines to use if_detach rather than just
  if_down.  if_detach destroys the device, while if_down just marks it
  down.  In this incarnation of the pccard things, we map the disable
  the slot action to detach the driver, which removes the driver from the
  device tree.  When that is done, a panic would soon follow as the
  ifconfig tried to down the device.

Didn't fix:
o Should cache the pccard dev child's pointer in struct slot
o remove now unused parts of struct slot
o Any driver using softc after detach has been called.  sio's softc used
  to be statically allocated, so you could check sc->gone, but that is
  now gone.
o Didn't remove gone from softc of drivers that use the old pccard method.

Didn't test:
o ed driver changes
o sio driver changes on pccards
o suspend (no laptop or apm support on my desktop)
1999-12-01 07:38:54 +00:00
Andrew Gallatin
0e7e521cf3 Allow a DMA channel of 0. This gets the on-board mss audio device working
on Digital AlphaStations 200 and 500 machines (and probably others as well).

Submitted by: dfr
1999-11-22 14:30:41 +00:00
Peter Wemm
5ab0514321 Allow NULL for startp and/or countp in bus_get_resource() so that you can
get one of the two without having to use a dummy variable.
1999-11-20 14:56:55 +00:00
Peter Wemm
592b1c00b5 Argh, don't turn the IIR test on unless it's a pccard. These tests mess
up the subsequent probes.
1999-11-18 10:29:06 +00:00
Peter Wemm
1447114333 Merge some typo fixes from dev/sio/sio.c (siostop -> comstop)
Remove EXTRA_SIO/NSIOTOT and make it fully dynamic (from dev/sio/sio.c)
Make sio work for pccard here - pccardd doesn't activate interrupts
until after prove has succeeded.
Mark the initial reset of likely sio ports as broken as it depended on
config supplying a list of locations to probe, devices are now proved
standalone.
Optimize a bit of COM_NOAST4() logic.
Use bus_get_resource_start() etc rather than using isa-centric calls.
Reactivate the IIR_TXRDYBUG test, I've got a card here with it.
Try to be a bit smarter about activating interrupts (ie: don't panic
if polled)
Fix some style bugs that have crept in over time (there are still more).
1999-11-18 07:22:41 +00:00
Peter Wemm
8de0675c61 Tidy up a few loose ends in the fifo setup code.
Don't use NFDC as an arbitary limit, it is not required and goes against
using PnP fdc devices (eg: when PNPBIOS is turned on, the motherboard
devices (sio, fdc, etc etc) are detected via PnP, not config(8).)
1999-11-18 05:15:09 +00:00
Doug Rabson
ec22663bed Reorganise the code so that I can add custom identify drivers dynamically
during autoconfig to support strange hardware (such as the Yamaha DS-1)
which implements 'legacy' ISA devices as well as a PCI device. This will
allow the PCI driver for the YMF724 to add the legacy devices to the ISA
bus and will allow the PnP system to automatically allocate the resources
for those devices.
1999-11-11 16:48:00 +00:00
Doug Rabson
427ccf0071 Add code to support ISA PnP. 1999-11-11 08:48:40 +00:00
Peter Wemm
475ad603bb Use cdevsw_add() (temporarily) to avoid DEV_DRIVER_MODULE(), since the
make_dev()'s that are there are not enough.
1999-11-08 07:32:06 +00:00
Peter Wemm
1faa5a84a8 Use DEVICE_MODULE() directly instead of DEV_DRIVER_MODULE. psm.c uses
make_dev() already.
1999-11-08 07:29:23 +00:00
Mitsuru IWASAKI
29803c2003 i8254_restore is called from apm_default_resume() to reload
the countdown register.
this should not be necessary but there are broken laptops that
do not restore the countdown register on resume.
when it happnes, it messes up the hardclock interval and system clock,
which leads to the infamous "calcru: negative time" problem.

Submitted by:	kjc, iwasaki
Reviewed by:	Steve O'Hara-Smith <steveo@eircom.net> and committers.
Obtained from:	PAO3
1999-10-30 14:56:01 +00:00
Warner Losh
806338b15d Last change to pccard_nbk now obviates the need to check the name of
the device in question.
Also fix warnings on if_ep_pccard.c
1999-10-28 05:06:14 +00:00
Warner Losh
a57cd933dc Add newbus pccard attachment for sio. Some of this code was written
by Peter Wemm, but I've not merged all the changes he sent to me yet.
This has not been reviewed by bde, so I'm committing to resolve any
issues he has with this when he returns from FreeBSD CON 99.

I've had four reports of this working for them.  I've been able to
communicate to both my built in modem and a pccard modem with these
patches.
1999-10-25 02:46:52 +00:00
Doug Rabson
bb2b9030e8 * Add some verbose logging to the PnP parser and fix a couple of bugs.
* Move pnp_eisaformat() to pnp.c, declared in <isa/pnpvar.h>.
* Turn the pnpbios code into an enumerator for the isa bus. This allows
  all devices known to the bios to be probed automatically.

Currently the pnpbios code is dependant on the PNPBIOS option. As the code
is tested more and when more drivers are converted this will be made the
default. I have PnP changes in the wings for fdc, atkbd, psm, pcaudio, and
joy. Sio already works with pnpbios.
1999-10-14 21:03:03 +00:00
Doug Rabson
25afb89b1c * Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
  layout of ivars.

* Move set_resource, get_resource and delete_resource from
  isa_if.m to bus_if.m.

* Simplify driver code by providing wrappers to those methods:

     bus_set_resource(dev, type, rid, start, count);
     bus_get_resource(dev, type, rid, startp, countp);
     bus_get_resource_start(dev, type, rid);
     bus_get_resource_count(dev, type, rid);
     bus_delete_resource(dev, type, rid);

* Delete isa_get_rsrc and use bus_get_resource_start instead.

* Fix a stupid typo in isa_alloc_resource reported by Takahashi
  Yoshihiro <nyan@FreeBSD.org>.

* Print a diagnostic message if we can't assign resources to a PnP
  device.

* Change device_print_prettyname() so that it doesn't print
  "(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
Peter Wemm
e6daa4d087 Oh foo. I got carried away. :-( "joy.h" is used to size an array.
(Incidently, there is no bounds checking...)
1999-10-11 16:09:00 +00:00
Steve Price
004348c300 Add support for the USRobotics Courier V.Everything (USR0101) modem.
Submitted by:	Robert Blayzor <robert@superior.net>
1999-10-11 15:06:14 +00:00
Peter Wemm
90c7f2d6a2 Zap unneeded #include (found by phk)
Remove useless #include "joy.h"; #if NJOY > 0 - this is always true
if it's being compiled. config arranges this.
1999-10-11 14:53:46 +00:00
Doug Rabson
5b45337d82 Factor out the PnP resource parser so that it can be re-used by pnpbios
and acpi.

Reviewed by: msmith
1999-10-09 13:11:46 +00:00
Matthew N. Dodd
8cd350e08c Remove old copies. These files now live in src/sys/dev/buslogic 1999-10-09 06:28:18 +00:00
Daniel Eischen
3c6967023c Change pnp ID for the SupraExpress 56i Sp V.90 modem (logical ID
0x8024b04e) so that the cards description is used instead of overriding
it.  While I'm here, add an ID for the SUP2080 and the SUP2030.

PR:		kern/13983
Submitted by:	Kurt D. Zeilenga <Kurt@OpenLDAP.Org> (SUP2030)
		dfr  (rest of change)
Reviewed by:	dfr
1999-10-03 22:25:19 +00:00
Daniel Eischen
c0d3a0d572 Add logical device ID for the Diamond SupraExpress 56K PnP modem:
Vendor ID SUP2480 (0x8024b04e), Serial Number 0x00001334
  PnP Version 1.0, Vendor Version 0
  Device Description: SupraExpress 56i Sp V.90

Reviewed by:	dfr
1999-10-03 17:50:09 +00:00
Doug Rabson
a2e6dbb39d Disable pnp devices before running heuristic probes. This allows us to
'hide' those devices from those probes so that they don't get probed and
then re-probed later when the pnp probe is run.
1999-10-03 12:13:06 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Poul-Henning Kamp
ae8e1d08d7 This patch clears the way for removing a number of tty related
fields in struct cdevsw:

        d_stop          moved to struct tty.
        d_reset         already unused.
        d_devtotty      linkage now provided by dev_t->si_tty.

These fields will be removed from struct cdevsw together with
d_params and d_maxio Real Soon Now.

The changes in this patch consist of:

        initialize dev->si_tty in *_open()
        initialize tty->t_stop
        remove devtotty functions
        rename ttpoll to ttypoll
        a few adjustments to these changes in the generic code
        a bump of __FreeBSD_version
        add a couple of FreeBSD tags
1999-09-25 16:21:39 +00:00
Poul-Henning Kamp
11a0be87e3 Two more devstat_end_transaction() -> devstat_end_transaction_buf(). 1999-09-19 12:43:34 +00:00
Poul-Henning Kamp
2186cd9e8d Use devstat_end_transaction_buf() rather than Use devstat_end_transaction() 1999-09-18 21:30:27 +00:00
Doug Rabson
336dd1864d Parse resource descriptions which don't have START_DEPENDANT tags
correctly.  This fixes resource allocation for various PnP ed cards but
there are other problems which prevent that driver from working right.
1999-09-17 08:18:34 +00:00
Bruce Evans
887ba12fc5 Removed diskerr()'s unused d_name arg and updated callers. This fixes
warnings caused by the arg having the wrong type (not const enough).
The arg was also wrong (a full name instead of a short one) for calls
from from subr_diskmbr.c and pc98/diskslice_machdep.c.
1999-09-13 12:59:41 +00:00
Julian Elischer
85a219d201 Changes to centralise the default blocksize behaviour.
More likely to follow.

Submitted by: phk@freebsd.org
1999-09-09 19:08:44 +00:00
Peter Wemm
213fcefef2 Make it build, copy from dev/sio/sio.c:
isa_set_flags -> device_set_flags
isa_get_flags -> device_get_flags
1999-09-08 13:46:54 +00:00
Peter Wemm
f97d942bd0 Restore the old sio* - bruce can fix it himself. 1999-09-08 10:59:03 +00:00
Doug Rabson
062acdb7e7 Change isa_get/set_flags() to device_get/set_flags(). 1999-09-07 08:42:49 +00:00
Peter Wemm
e5174d14c5 Repo copy isa/sio* to dev/sio/sio* in preperation for extra bus methods
including pci.
Also, eliminate NSIOTOT and do it dynamically where it matters.
1999-09-06 14:06:23 +00:00
Peter Wemm
945f740363 Move the #if 0 to catch the card.h include and make sure it's zero. 1999-09-06 13:30:36 +00:00
Warner Losh
13264f28fb Start to disentangle the isa attachments from other buses. Partially
rewrite the pccard attachment case.  This is a work in progress, but
doesn't break the isa case.

I left the #if 0...#endif around the pccard stuff, at Peter's request,
so that normal users don't shoot themselves in the foot.

While I was here:
	o Indent a comment to the right location
	o Spell Unknown with a final 'n'.

Reviewed by: peter
1999-09-06 06:45:20 +00:00
Doug Rabson
2aadbbb680 Only set the description if there is one in the matching isa_pnp_id. 1999-09-04 14:43:35 +00:00
Doug Rabson
bd64ce72a8 Add USR3031 pnp id.
Submitted by: Steve Price <sprice@hiwaay.net>
1999-09-04 14:31:56 +00:00
Doug Rabson
1c3111dc06 Remove the last vestiges of the old pnp code in favour of the new one. 1999-09-03 20:01:08 +00:00
Peter Wemm
16e68fc605 Cosmetic tweak. Collect the fdc methods together and apart from the fd
methods so it's a little easier to seperate the two when reading the code.
1999-09-03 11:32:21 +00:00
Julian Elischer
7012bab988 Revert a bunch of contraversial changes by PHK. After
a quick think and discussion among various people some form of some of
these changes will probably be recommitted.

The reversion requested was requested by dg while discussions proceed.
PHK has indicated that he can live with this, and it has been agreed
that some form of some of these changes may return shortly after further
discussion.
1999-09-03 05:16:59 +00:00
Matthew N. Dodd
7612e4c122 This adds the i386 specific support for systems with a MicroChannel
Architecture bus.

Reviewed by: msmith
1999-09-03 02:04:28 +00:00
Peter Wemm
48ab255e6b s/LOGIGAL/LOGICAL/ 1999-09-02 05:13:01 +00:00
Doug Rabson
4249382df0 This represents essentially a complete rewrite of the ISA PnP code. The
new system is integrated with the ISA bus code more cleanly and allows
the future addition of more enumerators such as PnPBIOS and ACPI.

This commit also enables the new pcm driver since it is somewhat tied to
the new PnP code.
1999-09-01 20:53:43 +00:00
Peter Wemm
523df07b14 Sigh. Serves me right for testing against a modified tree (dfr's pnp
changes).  Doug changed these variables.  This should fix the isa_compat.c
breakage that phk reported.  (Sorry!)
1999-09-01 14:53:16 +00:00
Poul-Henning Kamp
c5b72c3d85 s/si_tty_tty/si_tty/g 1999-08-30 10:35:37 +00:00
Poul-Henning Kamp
02e1576966 Make bdev userland access work like cdev userland access unless
the highly non-recommended option ALLOW_BDEV_ACCESS is used.

(bdev access is evil because you don't get write errors reported.)

Kill si_bsize_best before it kills Matt :-)

Use the specfs routines rather having cloned copies in devfs.
1999-08-30 07:56:23 +00:00
Poul-Henning Kamp
9465bf4495 Initialize dev->si_bsize*, the floppy driver doesn't use dsopen(). 1999-08-28 08:10:13 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Julian Elischer
ada9bd8cb8 Add PHK's make_dev() into more places where DEVFS used to be
hooked in directly.

Alpha change checked by: Matthew Jacob <mjacob@feral.com>
i4b ISDN changes checked by: Udo Schweigert <ust@cert.siemens.de>
    and Hellmuth Michaelis <hm@hcs.de>
PC98 changes checked by: Takahashi Yoshihiro <nyan@FreeBSD.org>
1999-08-27 07:26:26 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Kazutaka YOKOTA
800da3b22a - Remove cdevsw entry points in individual keyboard drivers;
instead, use generic entry points for all drivers.
- Eliminate bogus makedev().
- Eliminate softc in the lower drivers, as it is no longer necessary.

Submitted (95%) by: phk
1999-08-22 09:52:33 +00:00
Kazutaka YOKOTA
7d27f93ac4 Improve the detection code for GlidePoint. This is still a kludge,
but better than before...

PR: kern/13215
1999-08-22 06:11:52 +00:00
Kazutaka YOKOTA
e6d37e188f Recognize Interlink VersaPad. `Tap' action will be recognized
as the button 4.

Submitted by: Masachika ISHIZUKA <ishizuka@ish.org>
1999-08-17 12:14:13 +00:00
Justin T. Gibbs
086646f7c6 Properly set the alignment argument to bus_dma_tag_create(). If we
don't care about the alignment, set it to 1, meaning single byte alignment.
1999-08-16 01:52:21 +00:00
Poul-Henning Kamp
49ff4debd3 Spring cleaning around strategy and disklabels/slices:
Introduce BUF_STRATEGY(struct buf *, int flag) macro, and use it throughout.
please see comment in sys/conf.h about the flag argument.

Remove strategy argument from all the diskslice/label/bad144
implementations, it should be found from the dev_t.

Remove bogus and unused strategy1 routines.

Remove open/close arguments from dssize().  Pick them up from dev_t.

Remove unused and unfinished setgeom support from diskslice/label/bad144 code.
1999-08-14 11:40:51 +00:00
Poul-Henning Kamp
f1fe3bf115 make alpha compile again. 1999-08-09 11:02:45 +00:00
Poul-Henning Kamp
ce9edcf5b5 Merge the cons.c and cons.h to the best of my ability. alpha may or
may not compile, I can't test it.
1999-08-09 10:35:05 +00:00
Poul-Henning Kamp
4cb4c215e5 Allocate and register struct tty on the fly. 1999-08-08 20:25:14 +00:00
Joerg Wunsch
25d01e9527 Revert rev 1.149. Bruce convinced me that the problem already disappeared
by the fix in rev 1.120, which i wasn't immediately aware of.
1999-07-29 11:27:33 +00:00
Matthew N. Dodd
f4e3b1e7dd Fix a typo.
Back out a few lines that I haven't dealt with properly yet.

Snickered at by: Mike Smith
1999-07-29 01:51:49 +00:00
Brian Feldman
8799702cbc Remove XXX from the headers (broke the build, I'm betting.) 1999-07-29 01:20:47 +00:00
Matthew N. Dodd
15317dd875 Alter the behavior of sys/kern/subr_bus.c:device_print_child()
- device_print_child() either lets the BUS_PRINT_CHILD
	  method produce the entire device announcement message or
	  it prints "foo0: not found\n"

Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)

Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())

The BUS_PRINT_CHILD method now returns int instead of void.

Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.

	- Devices are 'on' a bus, not 'at' it.
	- If a custom BUS_PRINT_CHILD method does the same thing
	  as bus_generic_print_child(), use bus_generic_print_child()
	- Use device_get_nameunit() instead of both
	  device_get_name() and device_get_unit()
	- All BUS_PRINT_CHILD methods return the number of
	  characters output.

Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
Mike Smith
e33bfde398 We're called too early to have any idea whether APM is going to be
active or not.  The only sane thing we can do here is assume that if
APM is supported it might be active at some point, and bail.

In reality, even this isn't good enough; regardless of whether we support
APM or not, the system may well futz with the CPU's clock speed and throw
the TSC off.  We need to stop using it for timekeeping except under
controlled circumstances.  Curse the lack of a dependable high-resolution
timer.
1999-07-28 20:22:30 +00:00
Kazutaka YOKOTA
828cb0403d Do not print resource values which are not set.
Reviewed by: dfr
1999-07-24 09:35:21 +00:00
Joerg Wunsch
409aadb1c9 Hack to work around a NULL pointer dereferencation that can be triggered
by removing a floppy that as being operated on.

The spagghetti is hardly understandable at all anymore, so i can't
100 % ascertain this is really the Right Thing to do, maybe our new
floppy driver maintainer, Jesus Monroy Jr can do this. :-))
1999-07-21 12:19:44 +00:00
Bruce Evans
e9ecccf8cb Updated acquire_timer2()'s state machine to work when the i8254 is
being used for timecounting.  Fixed a race or two in it.  Undisabled
it.

PR:		10455
1999-07-18 18:32:42 +00:00
Bruce Evans
ab64b6dc3c Don't let the machdep.tsc_freq sysctl proceed if the TSC is present
but broken, since tsc_timecounter is not initialised in that case,
and updating an uninitialised timecounter is fatal.

Fixed style bugs in the machdep.i8254_freq and machdep.tsc_freq
sysctls.

Reviewed by:	phk
1999-07-18 15:19:29 +00:00
Kazutaka YOKOTA
01533d852e Improve Logitech MouseMan+ protocol support. 1999-07-12 15:16:14 +00:00
Kazutaka YOKOTA
551e01b126 Implement a kludge for some wheeled mice for which infamous "psmintr:
out of sync..." messages is generated and the wheel movement is not
recognized.

The trick is found by Takashi Nishida.
1999-07-12 13:40:21 +00:00
Poul-Henning Kamp
03016f421b Remove cmaj and bmaj args from DEV_DRIVER_MODULE. 1999-07-04 14:58:56 +00:00
Kazutaka YOKOTA
a6c5d058bc Allocate the port resource when attaching the keyboard controller,
rather than when the individual child device is attached.
1999-06-29 17:35:09 +00:00
Kazutaka YOKOTA
f94ae09657 Skip the device if it is disabled, when searching for a serial port
to be used for the kernel console in sccnprobe().
1999-06-29 17:34:16 +00:00
Peter Wemm
eb7fc512af Don't #include i386/isa/isa_dma.h - it's in isa/isavar.h now. This
driver is probably not far from being MI now anyway.
1999-06-28 09:19:58 +00:00
Peter Wemm
e66b7bac41 Shut up gcc. 1999-06-27 09:08:48 +00:00
Kirk McKusick
67812eacd7 Convert buffer locking from using the B_BUSY and B_WANTED flags to using
lockmgr locks. This commit should be functionally equivalent to the old
semantics. That is, all buffer locking is done with LK_EXCLUSIVE
requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will
be done in future commits.
1999-06-26 02:47:16 +00:00
Kazutaka YOKOTA
ffc1d9bd45 Declare the correct size of softc and fix sc_get_softc(). 1999-06-24 09:06:48 +00:00
Brian Feldman
9840e7cb5a This commit gives support for the Rise mP6 CPU. It has two changes:
1. Rise is recognized in identdcpu.c.
	2. The TSC is not written to. A workaround for the CPU bug is being
	   applied to clock.c (the bug being that the mP6 has TSC enabled
	   in its CPUID-capabilities, but it only supports reading it. If we
	   try to write to it (MSR 16), a GPF occurs.) The new behavior is that
	   FreeBSD will _not_ zero the TSC. Instead, we do a bit of 64-bit
	   arithmetic.

Reviewed by:	msmith
Obtained from:	unfurl & msmith
1999-06-24 03:48:25 +00:00
Kazutaka YOKOTA
6e8394b8ba The second phase of syscons reorganization.
- Split syscons source code into manageable chunks and reorganize
  some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV.  When this key is pressed, the vty
  immediately before the current vty will become foreground.  Analogue
  to PREV, which is usually assigned to the PrntScrn key.
  PR: kern/10113
  Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
  handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized.  It now should be slightly more
  robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
  APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
  SC_NO_HISTORY and SC_NO_SYSMOUSE.
  Various parts of syscons can be omitted so that the kernel size is
  reduced.

  SC_PIXEL_MODE
  Made the VESA 800x600 mode an option, rather than a standard part of
  syscons.

  SC_DISABLE_DDBKEY
  Disables the `debug' key combination.

  SC_ALT_MOUSE_IMAGE
  Inverse the character cell at the mouse cursor position in the text
  console, rather than drawing an arrow on the screen.
  Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

  SC_DFLT_FONT
  makeoptions "SC_DFLT_FONT=_font_name_"
  Include the named font as the default font of syscons.  16-line,
  14-line and 8-line font data will be compiled in.  This option replaces
  the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
  frame buffer.

- New kernel configuration option: VGA_WIDTH90
  Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60.  These
  modes are mot always supported by the video card.
  PR: i386/7510
  Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
  split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
  (another new file).  machine/console.h is still maintained for
  compatibility reasons.

- Kernel console selection/installation routines are fixed and
  slightly rebumped so that it should now be possible to switch between
  the interanl kernel console (sc or vt) and a remote kernel console
  (sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
  Because of the header file reorganization described above, screen
  savers and splash screen decoders are slightly modified.  After this
  update, /sys/modules/syscons/saver.h is no longer necessary and is
  removed.
1999-06-22 14:14:06 +00:00
Peter Wemm
20510b2017 Use the proper interfaces to find if a device is enabled, don't dig into
the bus mechanism's private internals!
1999-06-20 13:10:09 +00:00
Greg Lehey
89bf63adaa sioprobe: Don't try to initialize disabled ports. In particular,
attempting to initialize sio3 caused problems with ATI video boards,
which cleverly share the I/O space.

PR: kern/12295
1999-06-19 08:14:56 +00:00
Kirk McKusick
5e1a20fd26 COM_LLCONSOLE should over-ride COM_DEBUGGER request. 1999-06-15 22:15:10 +00:00
Peter Wemm
4961913d45 Quieten the bt_isa_probe() messages since they get a bit much when
the isa probe has gone hunting for a card on it's own.
1999-06-03 20:56:09 +00:00
Kazutaka YOKOTA
2b9e6c7549 Fix PS/2 MouseMan+ protocol. We have been looking at a wrong place
for the sign bit for roller movement!
1999-06-03 12:42:10 +00:00
Doug Rabson
a97c75b7ea * Change include file locations.
* Fix some misunderstandings about the return value of resource_int_value().
* Make it build on alpha (doesn't work yet...)
1999-05-31 18:39:17 +00:00
Doug Rabson
3bfc7e5928 Remove fd driver from its old home and change files which include rtc.h
to account for its new location.
1999-05-31 18:36:14 +00:00
Poul-Henning Kamp
2447bec829 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
Poul-Henning Kamp
3faff79c9e The PPSAPI group defines the polarity in draft 3, we guessed it wrong. 1999-05-31 06:57:31 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Doug Rabson
46e1f231cd Simplistic pnp support. Needs more ids to be added. 1999-05-30 11:14:39 +00:00
Doug Rabson
f7f2df54bb No support for pnp yet. 1999-05-30 11:12:30 +00:00
Doug Rabson
d384956496 No support for pnp devices yet. 1999-05-30 11:10:10 +00:00
Doug Rabson
cfa84f4631 * Add ivars for ISA pnp.
* Move isa_dma* declarations to isavar.h.
* Add a method ISA_DELETE_RESOURCE() to the ISA interface.
* Tidy up include protection defines.
1999-05-30 11:02:17 +00:00
Poul-Henning Kamp
6deb5a62cc Stop the TSC from being used as timecounter on K5/step0 machines. 1999-05-29 06:57:55 +00:00
Bruce Evans
b50641ef9c Fixed glitches (jumps) of about 1/HZ seconds for the i8254 timecounter.
The old version only worked right when the time was read strictly
more often than every 1/HZ seconds, but we only guarantee reading
it every (1/HZ + epsilon) seconds.  Part of rev.1.126-1.127 attempted
to fix this but didn't succeed.  Detect counter rollover using the
heuristic from the old version of microtime() with additional
complications for supporting calls from fast interrupt handlers.
This works provided i8254 interrupts are not delayed by more than
1/(2*HZ) seconds.

This needs more comments, and cleanups for the SMP case, and more
testing of the SMP case before it is merged into RELENG_3.

Tested by:		jhay
1999-05-28 14:08:59 +00:00
Doug Rabson
0476a4d4ff Allow a sio port with its flags set to DEBUGGER+LLCONSOLE to be used for
gdb. This allows the sio probe for that port to be disabled which stops
it from confusing the debugger.
1999-05-28 09:37:11 +00:00
Doug Rabson
bea6af4d31 * Change device_add_child_after() to device_add_child_ordered() which is
easier to use and more flexible.
* Change BUS_ADD_CHILD to take an order argument instead of a place.
* Define a partial ordering for isa devices so that sensitive devices are
  probed before non-sensitive ones.
1999-05-28 09:25:16 +00:00
Doug Rabson
6f50cfb43a Use the resource apis to manipulate resources. 1999-05-22 15:47:34 +00:00
Doug Rabson
f78030e22d Don't use BUS_WRITE_IVAR to manipulate resources. 1999-05-22 15:45:47 +00:00
Doug Rabson
a3be63b3ce * Factor out the common code between the isa bus drivers for i386 and alpha.
* Re-work the resource allocation code to use helper functions in subr_bus.c.
* Add simple isa interface for manipulating the resource ranges which can be
  allocated and remove the code from isa_write_ivar() which was previously
  used for this purpose.
1999-05-22 15:18:28 +00:00
Kazutaka YOKOTA
ec6948ccea Slight reorganization of internal interface in the keyboard controller
driver.
1999-05-18 11:33:14 +00:00
Doug Rabson
6c2e3dde8c * Define a new static method DEVICE_IDENTIFY which is called to add device
instances to a parent bus.
* Define a new method BUS_ADD_CHILD which can be called from DEVICE_IDENTIFY
  to add new instances.
* Add a generic implementation of DEVICE_PROBE which calls DEVICE_IDENTIFY
  for each driver attached to the parent's devclass.
* Move the hint-based isa probe from the isa driver to a new isahint driver
  which can be shared between i386 and alpha.
1999-05-14 11:22:47 +00:00
Bruce Evans
f86e40770a Fixed reset handling for motor off resets. I first fixed this together
with other reset handling in rev.1.83 but broke it in rev.1.120.  The
breakage didn't seem to cause any problems even on the system which had
problems ("extra" interrupts and botched handling thereof) before rev.1.83.
It only affects multi-floppy systems anyway.
1999-05-11 04:58:30 +00:00
Doug Rabson
1d3710bdf3 Adjust console stuff now that makedev is no longer a macro. 1999-05-10 14:01:35 +00:00
Peter Wemm
3bab4ac5a1 For what it's worth, idelayed is declared as a volatile in the headers,
and even though it's not used in this file make it a volatile here too.
1999-05-09 23:32:29 +00:00
Peter Wemm
e2eb6a14cd Remove hackish foot protection.. If you ask for an atkbd on an isa bus
rather than on the keyboard controller, you will get it.. (and shoot your
feet)
1999-05-09 20:45:53 +00:00
Peter Wemm
d1935ba94c Make COM_ESP and COM_MULTIPORT compile for LINT. It might even work.. 1999-05-09 20:35:02 +00:00
Peter Wemm
1d361692a7 Optimize out a couple of places where com_addr() is used twice in a row,
although this is pretty trivial.  devclass_get_softc() is a tad more
expensive than the old com_addr() implementation.  If Bruce is really
worried about the cost of this, it could always be changed so that the
softc pointer is stored in a local array again.
1999-05-09 16:56:38 +00:00
Peter Wemm
b6dc33dbf2 Delete the #if'ed out old isa bus probe/attach routines 1999-05-09 16:39:24 +00:00
Peter Wemm
6f42b336a5 Move opt_sio.h options to conf/options and activate in isa/sio.c 1999-05-09 13:10:49 +00:00
Poul-Henning Kamp
52400704e9 Unconfuse DEV_MODULE() and DEV_DRIVER_MODULE() about the difference between
a major number for a dev_t.
1999-05-09 13:00:50 +00:00
Poul-Henning Kamp
3000820ae0 add some amount of sanity to the way the gdb stuff finds its device.
I'm not too happy about the result either, but at least it has less
chance of backfiring.

This particular feature could be called "a mess" without offending
anybody.
1999-05-09 10:51:13 +00:00
Poul-Henning Kamp
1a4dd80a43 siocngetc & putc can be staticized. 1999-05-09 10:28:50 +00:00
Kazutaka YOKOTA
d1a67a9435 Revive APM hooking code for i386 arch now that the same source file is
used for both i386 and alpha (the code was in sys/i386/isa/psm.c, but
was disabled when ported to alpha.)
1999-05-09 04:58:35 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Peter Wemm
6d9ecc2ba7 Print the child IRQ on it's identification line. 1999-05-08 20:25:38 +00:00
Peter Wemm
05170bddd7 Brace initializers to avoid a warning. 1999-05-08 20:20:18 +00:00
Peter Wemm
4fdff1649a GC unused #define id_physid id_scsiid 1999-05-08 18:13:15 +00:00
Peter Wemm
929f6b0a11 Slightly increase the visibility of the isa_wrap_old_drivers() stuff. It
would be a shame to pollute the new isa.c with the isa_device.h defs.
1999-05-08 18:11:04 +00:00
Kirk McKusick
5c92a5b353 Get rid of extern declarations on gdb stuff so systems compiled without
DDB will compile. Warn users that try to use GDB without specifying a GDB
port in their configuration file.
1999-05-07 23:08:23 +00:00
Matt Jacob
49c36ff4f3 fix it so it compiles on alpha again 1999-05-07 17:52:01 +00:00
Poul-Henning Kamp
46eede0058 Continue where Julian left off in July 1998:
Virtualize bdevsw[] from cdevsw.  bdevsw() is now an (inline)
        function.

        Join CDEV_MODULE and BDEV_MODULE to DEV_MODULE (please pay attention
        to the order of the cmaj/bmaj arguments!)

        Join CDEV_DRIVER_MODULE and BDEV_DRIVER_MODULE to DEV_DRIVER_MODULE
        (ditto!)

(Next step will be to convert all bdev dev_t's to cdev dev_t's
before they get to do any damage^H^H^H^H^H^Hwork in the kernel.)
1999-05-07 10:11:40 +00:00
Poul-Henning Kamp
c48d17750f Introduce two functions: physread() and physwrite() and use these directly
in *devsw[] rather than the 46 local copies of the same functions.

(grog will do the same for vinum when he has time)
1999-05-07 07:03:47 +00:00
Kirk McKusick
e244fe31d6 Generalize to allow any serial port to be used as the GDB port.
Mark the GDB port in the config file with flags 0x80. Currently
only the sio driver checks these flags and sets up a GDB port,
but adding similar code to other serial drivers would be easy.
For backward compatibility, if an sio port is marked as the console
and no port is marked as the gdb port, the GDB port will be mapped
to the console port. This hack should go away at some point.
1999-05-07 06:50:41 +00:00
Poul-Henning Kamp
b0eeea2042 remove b_proc from struct buf, it's (now) unused.
Reviewed by:	dillon, bde
1999-05-06 20:00:34 +00:00
Peter Wemm
d5558c001a Fix up a few easy 'assignment used as truth value' and 'suggest parens
around && within ||' type warnings.  I'm pretty sure I have not masked
any problems here, I've committed real problem fixes seperately.
1999-05-06 18:44:42 +00:00
Peter Wemm
522c197d02 The joypart() macro had a precedence bug. Add seatbelts for UNIT() too. 1999-05-06 18:39:32 +00:00
Peter Wemm
edfdec1910 Disable FDC_YE - it's broken at present (breaking LINT) and awaiting some
pccard fixups.
Make DEVFS compile, it breaks LINT.
1999-05-02 20:38:08 +00:00
Dmitrij Tejblum
604359cf9b s/static foo_devsw_installed = 0;/static int foo_devsw_installed;/.
(Edited automatically)
1999-04-28 10:54:24 +00:00
Poul-Henning Kamp
f711d546d2 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
Poul-Henning Kamp
0bb2226a4d Make the machdep.i8254_freq and machdep.tsc_freq sysctls modify the
timecounter as well

Asked for by:	bde, jhay
1999-04-25 09:00:00 +00:00
Dmitrij Tejblum
b079102dc5 Modify the non-i386 version of disable_intr() and enable_intr() so that they
don't produce a warning on every use.
1999-04-24 10:41:21 +00:00
Peter Wemm
8e51a153aa Revert part of 1.9; we don't need to reset the port after release now that
the isa bus doesn't clear the hints at that point.
1999-04-24 06:48:27 +00:00
Peter Wemm
9d0e5f96b0 Return the port size from the probe.
"ppc0 at port 0x378 irq 7 drq 3 on isa0" becomes
"ppc0 at port 0x378-0x37f irq 7 drq 3 on isa0"
1999-04-22 13:10:43 +00:00
Peter Wemm
8528f91719 oops, SMP was missing includes for a typedef. 1999-04-21 07:41:40 +00:00
Peter Wemm
54a8c69347 Stage 1 of a cleanup of the i386 interrupt registration mechanism.
Interrupts under the new scheme are managed by the i386 nexus with the
awareness of the resource manager.  There is further room for optimizing
the interfaces still.  All the users of register_intr()/intr_create()
should be gone, with the exception of pcic and i386/isa/clock.c.
1999-04-21 07:26:30 +00:00
Peter Wemm
0f6bc47029 Make the bt isa driver work..
- fix cut/paste problem. :-)
- don't forget to call isa_dmacascade()
- reset the port after we release resources.

That last one is a trap to watch out for..  The isa bus driver uses the
same port/irq/mem/etc variables for the initial probe hints as it does
for allocation/deallocation tracking.  Releasing a resource clears the
variable and then you loose the hint during attach.. (ouch!)
1999-04-18 19:08:28 +00:00
Peter Wemm
a49a3d4433 Implement an EISA new-bus framework. The old driver probe mechanism
had a quirk that made a shim rather hard to implement properly and it was
just easier to convert the drivers in one go.  The changes to the
buslogic driver go beyond just this - the whole driver was new-bus'ed
including pci and isa.  I have only tested the EISA part of this so far.

Submitted by:	 Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
Peter Wemm
25f4337454 Merge revs 1.57 and 1.60 of i386/isa/psm.c 1999-04-18 15:12:11 +00:00
Peter Wemm
f3a865fb76 Merge missing changes from i386/isa/sioreg.h (PC98 related) 1999-04-18 14:37:47 +00:00
Peter Wemm
0dd2ac5462 Tidy up a few things left over from the conversion from i386/isa/sio.c.
Leave two #if 0'd notes about the way things used to be done for reference.
1999-04-18 14:35:28 +00:00
Doug Rabson
e2117e478b Register sio interrupts as fast (fixing some silo overflow messages). 1999-04-18 14:11:01 +00:00
Peter Wemm
007e69315a Merge up to rev 1.234 (nice revision number!) of i386/isa/sio.c. 1999-04-17 01:02:27 +00:00
Peter Wemm
c976cd3849 Merge up to rev 1.226 of i386/isa/sio.c 1999-04-17 00:37:01 +00:00
Peter Wemm
6e694ebb8d Copy across some apparently missing cleanups from i386/isa/vga_isa.c 1999-04-16 23:54:24 +00:00
Peter Wemm
c2c75d780e As a temporary anti-foot-shooting measure, don't let the user attach
the atkbd device to isa, as was in the old (and 3.x) GENERIC config.
1999-04-16 23:39:15 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Poul-Henning Kamp
bbca5c9c2c failled spell-check 1999-04-06 21:15:18 +00:00
Peter Wemm
2ada239c12 Use reference counted PHOLD/PRELE rather than the P_PHYSIO flag. 1999-04-06 03:06:51 +00:00
Kazutaka YOKOTA
e9deda23ae Keyboard driver update in preparation for the USB keyboard driver.
- Refined internal interface in keyboard drivers so that:
  1. the side effect of device probe is kept minimal,
  2. polling mode function is added,
  3. and new ioctl and configuration options are added (see below).

- Added new ioctl: KDSETREPEAT
  Set keyboard typematic rate.  There has existed an ioctl command,
  KDSETRAD, for the same purpose.  However, KDSETRAD is dependent on
  the AT keyboard.  KDSETREPEAT provides more generic interface.
  KDSETRAD will still be supported in the atkbd driver.

- Added new configuration options:
  ATKBD_DFLT_KEYMAP
  Specify a keymap to be used as the default, built-in keymap.
  (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP,
  SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap.
  These options are now gone for good.  The new option is more general.)

  KBD_DISABLE_KEYMAP_LOADING
  Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
Justin T. Gibbs
4297664797 Pull 'ISA style' probe where interrupt information is determined through
commands sent to card, into the base driver module.  It is now used for
EISA board probes too.
1999-03-08 21:32:59 +00:00
Nicolas Souchu
5174ad8b76 More appropriate fix to the id_irq read during probe 1999-02-14 22:02:47 +00:00
Nicolas Souchu
a1142115dd The way the interrupt id was calculated was wrong and the lpt
driver was thinking irq was enabled although it wasn't.
This case was particular to a no-interrupt static configuration.

Reported by: "Norman C. Rice" <nrice@emu.sourcee.com>
1999-02-14 17:09:59 +00:00
Nicolas Souchu
3ab971c14f Fix interrupt handling with DMA. Bit nFault was tested in the control reg.
instead of the status reg. and check ECP mode before considering nFault.
1999-02-14 12:03:35 +00:00
Kenneth D. Merry
2a888f938e Add a prioritization field to the devstat_add_entry() call so that
peripheral drivers can determine where in the devstat(9) list they are
inserted.

This requires recompilation of libdevstat, systat, vmstat, rpc.rstatd, and
any ports that depend on the devstat code, since the size of the devstat
structure has changed.  The devstat version number has been incremented as
well to reflect the change.

This sorts devices in the devstat list in "more interesting" to "less
interesting" order.  So, for instance, da devices are now more important
than floppy drives, and so will appear before floppy drives in the default
output from systat, iostat, vmstat, etc.

The order of devices is, for now, kept in a central table in devicestat.h.
If individual drivers were able to make a meaningful decision on what
priority they should be at attach time, we could consider splitting the
priority information out into the various drivers.  For now, though, they
have no way of knowing that, so it's easier to put them in an easy to find
table.

Also, move the checkversion() call in vmstat(8) to a more logical place.

Thanks to Bruce and David O'Brien for suggestions, for reviewing this, and
for putting up with the long time it has taken me to commit it.  Bruce did
object somewhat to the central priority table (he would rather the
priorities be distributed in each driver), so his objection is duly noted
here.

Reviewed by:	bde, obrien
1999-02-10 00:04:13 +00:00
Kazutaka YOKOTA
3dec8614fe Oops, the last commit contained a wrong patch. This is the correct one. 1999-02-05 12:58:40 +00:00
Kazutaka YOKOTA
1c27745f73 - Don't assume the line length in the video memory is always the same as
the screen width.
- Store the current video mode information in the `video_adapter' struct.
- The size of the `v_offscreensize' field in the VESA mode information
  block is u_int16, not u_int8.
1999-02-05 11:52:13 +00:00
Nicolas Souchu
c9ab07382c Fix compile warnings about missing braces around static initialization of unions. 1999-01-31 11:52:04 +00:00
Nicolas Souchu
20240fa3ad Distinguish EPP address/data register. Add EPP address register access to ppi.
Change microseq offsets. Previously, offsets of the program counter where
added to the index of the current microinstruction. Make them rely on the
index of the next executed microinstruction.

Suggested by: Luigi Rizzo <luigi@labinfo.iet.unipi.it>
1999-01-30 15:35:39 +00:00
Poul-Henning Kamp
4e2d2aa1cd Use suser() to check for super user rather than examining cr_uid directly.
Use TTYDEF_SPEED rather than 9600 a couple of places.

Reviewed by:	bde, with a few grumbles.
1999-01-30 12:17:38 +00:00
Doug Rabson
8a99777019 Update the alpha port to use the new syscons.
Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp> (partly)
1999-01-23 16:53:30 +00:00
Matt Jacob
89297ac4d1 I guess this is now a legacy driver (for alpha only right now).
At any rate, some changes had to be made so that alpha would compile.
1999-01-20 18:27:31 +00:00
Peter Wemm
d17e4ee67d Update the pccard hooks to use a module style declaration instead. 1999-01-19 00:21:53 +00:00
Bruce Evans
e93e63cb39 Fixed corruption of the fd buffer queue. Once upon a time, the active
buffer had to be left on the head of the queue for [bufq]disksort()
to sort against.  This isn't right for devices that can support multiple
active i/o's, and only the fd driver did it.  "Fixing" this in rev.1.36
of ufs_disksubr.c broke the fd driver in much the same way as rev.1.52
of <sys/buf.h> broke it (see rev.1.119).

Bug reported and fix tested by:	dt
1999-01-15 09:15:27 +00:00
Nicolas Souchu
a7006f894f Fix broken low level ppb_rxxx() return type: char becomes u_char.
Submitted by: Bruce Evans <bde@zeta.org.au>

Some ppb bootup printfs simplified.
1999-01-10 16:41:14 +00:00
Nicolas Souchu
bc35c17446 Major ppbus commit with:
+ ECP parallel port chipset FIFO detection
	+ DMA+FIFO parallel I/O handled as chipset specific
	+ nlpt updated in order to use the above enhanced parallel I/O.
	  Use 'lptcontrol -e' to use enhanced I/O
	+ Various options documented in LINT
	+ Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for
	  an overview of the IEEE1284 standard
	+ Detection of PnP parallel devices at boot
	+ Read capability added to nlpt driver to get IEEE1284 compliant
	  printer status with a simple 'cat /dev/lpt0'
	+ IEEE1284 peripheral emulation added to BYTE mode. Two computers
	  may dialog according to IEEE1284 signaling method.
	  See PERIPH_1284 option and /sys/dev/ppbus/ppi.c

All this code is supposed to provide basic functions for IEEE1284 programming.
ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Kazutaka YOKOTA
cc7495b5c1 Move IO_PSMSIZE from kbdio.h to isareg.h.
While I am here, correct the values for IO_MDASIZE and IO_CGASIZE; they
  should be 12 rather than 16.
1999-01-06 05:49:30 +00:00
Tim Vanderhoek
dea9268b70 Silence -Wtrigraph.
Submitted by:	Bradley Dunn <bradley@dunn.org>  (pr: kern/8817)
1998-12-30 00:37:44 +00:00
Poul-Henning Kamp
fc47545ec3 Pre 3.0 branch cleanup casualty #6: ft 1998-12-27 13:40:57 +00:00
Bruce Evans
ff9607b070 Fixed LINT breakage in previous commit. Option FDC_YE enabled a
syntax error.  Options FDC_YE and DEVFS together enabled references
to a nonexistent variable and calls of a nonexistent function.
1998-12-14 16:29:58 +00:00
Stephen McKay
2619394c7c Fix tabs that should have been spaces. Some were in kernel error messages. 1998-12-14 13:30:29 +00:00
Steve Price
921543cf2f Add support for another 3COM/USR PNP modem, USR3031. 1998-12-13 23:12:54 +00:00
Warner Losh
69acd21dfd Add support for the YE-Data external PCMCIA floppy driver. This
floppy is used on the toshiba Libretto line of subnotebook computers.
It differs from a normal floppy in that you must use PIO rather than
DMA to transfer the data.

To enable this, you must add options "FDC_YE" to your kernel.  I don't
have a machine that has a floppy and a pcmcia slot to test to make
sure that this doesn't impact normal floppy units, so I've left this as
an option.

I have ported this to -current and made an attempt to ensure that the
indentation conforms to style(9), aka the bruce filter.

Reviewed by:	nate, markm
Submitted by:	David Horwitt (dhorwitt@ucsd.edu)
1998-12-12 08:16:01 +00:00
Eivind Eklund
2ae353f9a7 Rename one of the two devfs_link's to devfs_makelink. 1998-12-10 19:57:01 +00:00
Archie Cobbs
f1d19042b0 The "easy" fixes for compiling the kernel -Wunused: remove unreferenced static
and local variables, goto labels, and functions declared but not defined.
1998-12-07 21:58:50 +00:00
Archie Cobbs
2127f26023 Examine all occurrences of sprintf(), strcat(), and str[n]cpy()
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.

These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.

Reviewed by:	Bruce Evans <bde@zeta.org.au>
Reviewed by:	Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by:	Mike Spengler <mks@networkcs.com>
1998-12-04 22:54:57 +00:00
Doug Rabson
08b6a4cbee * Add hooks to allow the X server to access I/O ports and memory.
* Update drivers to the latest version of the bus interface.

The ISA drivers' use of the new resource api is minimal.  Garrett has
some much cleaner drivers which should be more easily shared between
i386 and alpha.  This has only been tested on cia based machines.  It
should work on lca and apecs but I might have broken something.
1998-11-15 18:25:17 +00:00
Justin T. Gibbs
3c1cabf7a2 Fix probes when a port address is specified. 1998-11-10 06:44:54 +00:00
Doug Rabson
66d22cfe03 Port the ps/2 mouse driver to the alpha. 1998-11-08 18:43:03 +00:00
Doug Rabson
7095ee912b * Fix a couple of places in the device pager where an address was
truncated to 32 bits.
* Change the calling convention of the device mmap entry point to
  pass a vm_offset_t instead of an int for the offset allowing
  devices with a larger memory map than (1<<32) to be supported
  on the alpha (/dev/mem is one such).

These changes are required to allow the X server to mmap the various
I/O regions used for device port and memory access on the alpha.
1998-11-08 12:39:07 +00:00
Nicolas Souchu
af5487872e pcf.c: timeout management added
ppc.c: nsc code improved. Actually, a complete rewrite.
1998-10-31 11:37:09 +00:00
Doug Rabson
57250ffb42 * Fix vga_probe() so that it doesn't report a non-vga display adapter as
a vga.
* Fix broken logic in syscons for a failed probe.
* Fix AlphaStation 500/600 so that non-serial consoles are supported.

Submitted by: Thomas Valentino Crimi <tcrimi+@andrew.cmu.edu> (vga bits),
	      Andrew Gallatin <gallatin@cs.duke.edu> (AS500/AS600)
1998-10-31 10:35:24 +00:00
Poul-Henning Kamp
d259be02bc Update timecounters to new interface. 1998-10-23 10:46:20 +00:00
Bruce Evans
fe310de802 Initialize isa_devtab entries for interrupt handlers in individual
device drivers, not in ioconf.c.  Use a different hack in isa_device.h
so that a new config(8) is not required yet.

pc98 parts approved by: kato
1998-10-22 05:58:45 +00:00
Warner Losh
bb415a7e88 Fix breakage introduced by last patch. bde has added CC_QUIET flag to
hasseen_isadev so this will be less noisy when conflicts do exist.
Also eliminate redundant warnings about conflicts.

Requested by: bde
Reviewed by: gibbs
1998-10-12 18:53:33 +00:00
Warner Losh
19bed41a5d Fix conficts in probe:
o For bt and aha only probe the one I/O range if a specific I/O is specified
  in the config file.
o Don't even try to probe I/O ranges that have been seen already.
o If we conflict with an IRQ or DRQ, then fail the probe.

Requested by: bde, gibbs
Approved by: jkh
1998-10-10 00:44:12 +00:00
Doug Rabson
6f19d636a6 Merge changes from i386/isa/sio.c up to revision 1.215. 1998-09-26 14:47:16 +00:00
Peter Wemm
d4a2828cde Underlying ,v files were copied and detagged. Re-commit old versions
onto the head revision.  (mainly using sys/bus.h etc for alpha)
1998-09-26 14:00:29 +00:00
Bruce Evans
f28d6834e1 Removed unused include of "ioconf.h" again. The CAM changes made ioconf.h
empty but regressed to including it here.
1998-09-24 10:43:42 +00:00
Bruce Evans
6ed49410a5 Attempt to work around a bug in the previous commit related to
non-reentrancy of SMP clock locking.  Depend on the giant lock
protecting clkintr().
1998-09-20 19:56:28 +00:00
Nicolas Souchu
0a40e22a5d - program counter was previously an index in the microsequence, now pc
is struct ppb_microseq* pointing directly into the microsequence
1998-09-20 14:47:01 +00:00
Bruce Evans
a6796db6ce Ensure that the i8254 timecounter doesn't go backards. It sometimes
went backwards when interrupts were masked for more than one i8254
interrupt period.  It sometimes went backwards when the i8254 counter
was reprogrammed.  Neither of these should happen in normal operation.

Update the i8254 timecounter support variables atomically.  Calling
timecounter functions from fast interrupt handlers may actually work
in all cases now.
1998-09-20 03:47:54 +00:00
Doug Rabson
9604f809cd Merge with the latest i386 syscons. 1998-09-17 09:38:36 +00:00
Justin T. Gibbs
9f02ad6073 Nuke uninitialized varible fd from retrier(). Change the devstat code
to reference fdc->fd instead.
1998-09-15 22:07:24 +00:00
Justin T. Gibbs
b2dfb1f906 Update system to new device statistics code.
Submitted by:	"Kenneth D. Merry" <ken@plutotech.com>
		mike@smith.net.au (Mike Smith)
1998-09-15 08:15:30 +00:00
Justin T. Gibbs
532abf3b7a Mylex/Buslogic MultiMaster SCSI-Host Adapter Driver for CAM. 1998-09-15 07:32:57 +00:00
Søren Schmidt
d024c95599 Remove the SLICE code.
This clearly needs alot more thought, and we dont need this to hunt
us down in 3.0-RELEASE.
1998-09-14 19:56:42 +00:00
Eivind Eklund
dfef928b1c Support PnP compatibility IDs. This allow e.g. the ed driver to pick
up any PnP NE2000 compatible card, instead of forcing us to always
update ID lists.

Submitted by:	Ugo Paternostro <paterno@dsi.unifi.it>
1998-09-13 22:15:44 +00:00
Nicolas Souchu
41990851b8 invalid printf call fixed -> compile time warning removed 1998-09-13 20:57:06 +00:00
Nicolas Souchu
54ad6085b1 ppbus enhanced to support ZIP+ : microseq improved 1998-09-13 18:26:44 +00:00
Tor Egge
572d053e17 Maintain a mapping from irq number to (ioapic number, int pin) tuple,
and use this when masking/unmasking interrupts.

Maintain a mapping from (iopaic number, int pin) tuple to irq number,
and use this when configuring devices and programming the ioapics.

Previous code assumed that irq number was equal to int pin number, and
that the ioapic number was 0.

Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
Nicolas Souchu
edcfcf270b printing with compatible mode fixed if ECP available + more verbose if bootverbose set 1998-09-02 20:34:34 +00:00
Bruce Evans
00671271c3 Fixed printf format errors. Only one left in LINT on i386's. 1998-08-24 02:28:16 +00:00
Bruce Evans
1fcee46997 Fixed printf format errors. 1998-08-23 10:16:26 +00:00
Bruce Evans
cf8c7b0963 Added D_TTY to the cdevswitch flags for all tty drivers. This is required
for the Lite2 fix for always returning EIO in dead_read().

Cleaned up the cdevswitch initializers for all tty drivers.

Removed explicit calls to ttsetwater() from all (tty) drivers.  ttsetwater()
is now called centrally for opens, not just for parameter changes.
1998-08-23 08:26:42 +00:00
Bruce Evans
9a02ad618f Fixed devfs initialization which I broke in the previous commit. 1998-08-20 05:12:48 +00:00
Bruce Evans
3fd2d29816 Enabled dynamically sized tty input buffers (with enough buffering
for 1 second's worth of input) and larger tty output buffers.  The
interrupt-level buffers are still too small for speeds above 115200
bps (only a little too small for 230400 bps if RTS flow control is
enabled).

Don't call ttsetwater() explicitly in open().  It is now called for
the TTYDISC l_open() and should be static.

Don't attempt to register the cdevsw more than once.
1998-08-19 04:17:38 +00:00
Bruce Evans
92971f1fd7 Register tty software interrupt handlers at run time using register_swi()
instead of at compile time using ifdefs.

Use _swi_null instead of dummycamisr.  CAM and dpt should call
register_swi() instead of hacking on ihandlers[] directly.
1998-08-11 17:01:32 +00:00
Doug Rabson
08b66b4483 Port syscons to the alpha. The driver itself has moved to sys/isa as it will
hopefully become a portable driver usable by all architectures.  The api
support files have had to be copied to sys/alpha/include since userland
programs expect to find them in <machine/*.h>.

All the revision history of the i386 syscons has been retained by a
repository copy.
1998-08-06 09:15:54 +00:00
Doug Rabson
1a4290e7f0 Support files for ISA bus. 1998-08-06 08:49:09 +00:00
Mike Smith
46f3ff7986 Major ppbus updates from the author.
- ppbus now supports PLIP via the if_plip driver
 - ieee1284 infrastructure added, including parallel-port PnP
 - port microsequencer added, for scripting the sort of port I/O
   that is common with parallel devices without endless calls up and down
   through the driver structure.
 - improved bus ownership behaviour among the ppbus-using drivers.
 - improved I/O chipset feature detection

The vpo driver is now implemented using the microsequencer, leading to
some performance improvements as well as providing an extensive example
of its use.

Reviewed by:	msmith
Submitted by:	Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1998-08-03 19:14:33 +00:00
Kazutaka YOKOTA
88a5f0cca7 1. Reorganized screen saver related code so that both the LKM screen
saver and splash screen can all work properly with syscons.  Note that
the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it
requires additional code from msmith.

- Reorganized the splash screen code to match the latest development
  in this area.
- Delay screen switch in `switch_scr()' until the screen saver is
  stopped, if one is running,
- Start the screen saver immediately, if any, when the `saver' key is
  pressed. (There will be another commit for `kbdcontrol' to support
  this keyword in the keymap file.)
- Do not always stop the screen saver when mouse-related ioctls
  are called.  Stop it only if the mouse is moved or buttons are
  clicked; don't stop it if any other mouse ioctls are called.

2. Added provision to write userland screen savers.  (Contact me if you
are interested in writing one.)

- Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to
  support userland screen savers.

3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
Kazutaka YOKOTA
855458e47b - When the system is shut down, switch to the vty0 if possible.
- Don't try to ring bell when system is going down. Beacuse the clock
  code is about to be stopped, the timeout routine won't be called
  anymore.
1998-08-03 09:18:58 +00:00
Kazutaka YOKOTA
2f803c851e Fix the bug which always reallocated the cut buffer whenever
the screen mode is changed even if another vty has larger size.
Reallocate the buffer only when the new screen size is larger than
the current cut buffer size.
1998-08-03 09:17:06 +00:00
Kazutaka YOKOTA
16d7bd5278 Don't accept the blank time value, if it is too big.
PR: bin/6188
1998-08-03 09:15:36 +00:00
Kazutaka YOKOTA
30f3a4598b - Add new bell types: "quiet.normal" and "quiet.visual".
When bell is of "quiet" types, the console won't ring (or flush)
  if the ringing process is in a background vty.
  PR: i386/2853

- Modify the escape sequence 'ESC[=%d;%dB' so that bell pitch and
  duration are set in hertz and msecs by kbdcontrol(1).
  There will be a corresponding kbdcontrol patch.
  PR: bin/6037
  Submitted by: Kouichi Hirabayashi (kh@eve.mogami-wire.co.jp)
1998-08-03 09:09:35 +00:00
Bruce Evans
5c1a1eae83 Fixed error handling:
- Call isa_dmadone() whenever necessary to stop DMA and/or free bounce
  buffers.  Undead DMA corrupted the malloc freelist fairly consistently
  in the following configuration: SLICE kernel, 2 floppy drives, no disk
  in fd0, disk in fd1.
- Don't call fdc_reset() from fd_timeout().  Doing so gave an "extra"
  interrupt which was usually misinterpreted as being for completion
  of the next FDC command; the interrupt for completion of the next
  FDC command was then usually misinterpreted...  There were further
  complications for interrupts latched by the soft-spl mechanism so
  that they were delivered after all the h/w interrupts went away.
  This caused at least wrong head settle delays and may be why the
  FreeBSD floppy driver seems to munch floppies more than most floppy
  drivers.  The reset was unnecessary anyway in cases that didn't have
  the bug described next, since is was repeated a little later for
  the IOTIMEDOUT state.  The state machine has complications to handle
  resets correctly, so just use it.
- Don't call retrier() from fd_timeout().  The IOTIMEDOUT state needs
  to be processed next, and it isn't valid to set to that state if
  retrier() has aborted the current transfer.  Doing so caused null
  pointer panics after the previous bug was fixed.

Improved error handling:
- If an i/o is aborted, arrange to reset in the state machine before
  doing the next i/o.  New fdc flag for this.  This fixes spurious
  warnings and lengthy busy-waiting for the next i/o.
- Split STARTRECAL into RESETCOMPLETE and STARTRECAL and only check
  for the results from reset if we actually reset.  This fixes spurious
  warnings for other paths to STARTRECAL.  [Oops, it may break reset
  handling for motor-off resets.]

Cleanups in fd_timeout():
- Renamed to fd_iotimeout() to make it clearer that it is only used
  for i/o.
- Don't handle the bp == 0 case.  This case can't happen for i/o.
- Don't check for controller-busy.  We know it must be.
- Don't print anything.  retrier() already prints too much for normal
  errors.
- Fudge the state differently so that the state machine advances
  fdc->retry and the status is invalid (perhaps this should fudge a
  valid state like the one for WP).
- Style fixes.
1998-07-29 13:00:42 +00:00
Bruce Evans
e5d7d24361 Fixed error handling after a seek error that can't happen. When the
controller reports a successful seek, it is very unlikely to report
seeking to a cylinder other than the one requested, but we check for
this, and botched the error handling for the requested_cylinder != 0
case.  This error happened when the bug fixed in rev.1.52 of <sys/buf.h>
caused the head of buffer queue to change to one starting on a different
cylnder - the requested cylinder was found, but it wasn't what we
thought we requested.  The fix is simply to arrange to reset the state
machine.

Corruption of the buffer queue seems to only have been a problem in the
floppy driver.  Other drivers dequeue the head of the queue before doing
physical i/o on it, so the corruption at worse broke the elevator sort
order.  Dequeueing breaks it anyway.
1998-07-18 03:15:33 +00:00
Bruce Evans
18da528d41 Changed %n to %r in devfs name format strings. %n has almost gone away. 1998-07-15 12:18:34 +00:00
Bruce Evans
29d6b96d69 The ioctl request arg is unsigned long, so don't attempt to pass it
around as signed int.
1998-07-15 09:59:31 +00:00
Bruce Evans
3cc954df66 Don't pretend to support ix86's with 16-bit ints by using longs
just to ensure 32-bit variables.  Doing so broke i386's with 64-bit
longs.
1998-07-14 11:42:05 +00:00
Julian Elischer
ad27f8d9a5 SLICE probing becomes asynchronous. It can now be triggered by
interupt level events. This needs a lot of cleanup, but has been working
here for a month or two.. originally needed for CAM integration
but that hasn't happenned yet. The probing  state machines for each
handler should be replaced by a more generic state-service. It's
still quite messy in there..
1998-07-13 08:23:05 +00:00
Poul-Henning Kamp
3bc7e56592 Improve a couple of comment.
PR:		7242
Reviewed by:	phk
Submitted by:	Peter Jeremy <peter.jeremyp@alcatel.com.au>
1998-07-11 08:01:18 +00:00
Bruce Evans
a838d83d8f Don't pretend to support ix86's with 7-bit ints by using longs just to
ensure 8-bit variables.  Doing so mainly bogotified some printf formats.
1998-07-11 06:35:39 +00:00
Warner Losh
f71f5262b1 Add the ability to suspend as well as hibernate to the system. This
is the kernel part of my commits, the userlevel stuff will be done in
a separate commit.  Add the ability to suspend as well as hibernate to
syscons.  Create a new virtual key like hibernate for suspend.  Update
apm_bios.h to define more apm bios goodies.
1998-07-06 06:29:07 +00:00
Julian Elischer
f7ea2f55d1 There is no such thing any more as "struct bdevsw".
There is only cdevsw (which should be renamed in a later edit to deventry
or something). cdevsw contains the union of what were in both bdevsw an
cdevsw entries.  The bdevsw[] table stiff exists and is a second pointer
to the cdevsw entry of the device. it's major is in d_bmaj rather than
d_maj. some cleanup still to happen (e.g. dsopen now gets two pointers
to the same cdevsw struct instead of one to a bdevsw and one to a cdevsw).

rawread()/rawwrite() went away as part of this though it's not strictly
the same  patch, just that it involves all the same lines in the drivers.

cdroms no longer have write() entries (they did have rawwrite (?)).
tapes no longer have support for bdev operations.

Reviewed by: Eivind Eklund and Mike Smith
	Changes suggested by eivind.
1998-07-04 22:30:26 +00:00
Kazutaka YOKOTA
bf41934ccb Don't refer to mouse_info.u.datea.[xyz] while processing MOUSE_BUTTON_EVENT
ioctl.  These fields don't have valid values for this ioctl.
PR: kern/6928
Submitted by: Bill Fenner <fenner@parc.xerox.com>
1998-06-24 10:21:30 +00:00
Poul-Henning Kamp
e29bc9add4 Avoid some panics in sio_unload which gets called with various dirt
if the attach of a modem card failed.
1998-06-24 09:23:32 +00:00
Bruce Evans
eca52014bd Don't log "unexpected" events on never-opened devices. Events left
over from the probe are now expected for incompatible UARTs that
deliver IRQs as a strobe (low) instead of a level (high).

Discard events on going-away devices too.  Endless loops may have
been possible when an active pccard was removed.
1998-06-16 11:05:59 +00:00
Steve Price
56cef66e8c Add a symlink from /dev/vga to /dev/ttyv0 when using DEVFS
for programs like doscmd.

PR:		6920
Submitted by:	Luoqi Chen <luoqi@chen.ml.org>
1998-06-13 18:53:22 +00:00
Poul-Henning Kamp
a58f0f8e66 Add a tc_ prefix to struct timecounter members.
Urged by:	bde
1998-06-09 13:10:54 +00:00
Poul-Henning Kamp
48115288df Add a member function more to the timecounters, this one is for use
with latch based PPS implementations.  The client that uses it will
be committed after more testing.
1998-06-07 20:36:55 +00:00
Doug Rabson
498b291e26 Fix some more ioctls which I missed becausese they were hidden by options
which were not in LINT.
1998-06-07 19:40:41 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Poul-Henning Kamp
dbb3475507 Add a "this" style argument and a "void *private" so timecounters can
figure out which instance to wount with.
1998-06-07 08:40:53 +00:00
Steve Price
810e1311d2 keymap -> key_map so that the kernel will compile with
-DESKEYMAP.

PR:		6864
Submitted by:	Javier Rueda <jmrueda@diatel.upm.es>
1998-06-06 17:45:11 +00:00
Bruce Evans
12e1ed28e2 Force success of the probe (after doing it as before except in one
miscconfigured case) if the port is the console.  This fixes several
bugs:
- if all sioprobe()s failed, then the console driver followed null
  pointers in cdevsw[].
- if the sioprobe() for the console failed but another sioprobe()
  succeeded, then init hung early when the console couldn't be
  opened.
- it was silly for the console to not be there after printing boot
  messages on it.
Bugs introduced by this are hopefully no worse than old ones caused
by forcing the success of the `cn' level probe.
1998-06-03 12:30:10 +00:00
Bruce Evans
b76bb1d472 Fixed a printf() arg botch in the previous commit.
Only complain about an irq mismatch in the probe if the configured
irq doesn't become active, and then print the bitmap of irqs that
became active (including clock irqs) instead of just the first
(not including clock irqs).

Bugs reported by: msmith
1998-06-03 09:43:38 +00:00
Bruce Evans
cd55b8f46c Converted the ICU-level interrupt tests (3, 5 and 8) in sioprobe() into
a test of the irq number, and made failure of this test non-fatal.
Removed related unused complications for the APIC_IO case.  Removed the
no-test3 flag.

Deverbosified the failure messages for the other tests.  Removed the
per-port verbose flag - just use the general verbose flag.
1998-05-31 10:53:55 +00:00
Poul-Henning Kamp
e796e00de3 Some cleanups related to timecounters and weird ifdefs in <sys/time.h>.
Clean up (or if antipodic: down) some of the msgbuf stuff.

Use an inline function rather than a macro for timecounter delta.

Maintain process "on-cpu" time as 64 bits of microseconds to avoid
needless second rollover overhead.

Avoid calling microuptime the second time in mi_switch() if we do
not pass through _idle in cpu_switch()

This should reduce our context-switch overhead a bit, in particular
on pre-P5 and SMP systems.

WARNING:  Programs which muck about with struct proc in userland
will have to be fixed.

Reviewed, but found imperfect by:       bde
1998-05-28 09:30:28 +00:00
Poul-Henning Kamp
d53fd54d9f LoadSoftModem() routine at sio.c does not trap general serial I/Os.
It fauls to probe eather DSI Modem or others.

PR:		4657
Reviewed by:	phk
Submitted by:	Kenji Saito <marukun@mx2.nisiq.net>
1998-05-20 06:46:58 +00:00
Poul-Henning Kamp
4b9afc97a7 Change a data type internal to the timecounters, and remove the "delta"
function.

Reviewed, but not entirely approved by: bde
1998-05-19 18:48:30 +00:00
Poul-Henning Kamp
c21410e119 s/nanoruntime/nanouptime/g
s/microruntime/microuptime/g

Reviewed by:	bde
1998-05-17 11:53:46 +00:00
Poul-Henning Kamp
bdb8446393 The PnP code in 2.2.6 detects the Motorola ModemSurfer 56K,
but doesn't do much of anything with it.  I added it to siopnp_ids[]
and it was found and recognized as a serial port.

PR:		6605
Reviewed by:	phk
Submitted by:	Dave Marquardt <marquard@zilker.net>
1998-05-13 07:26:55 +00:00
Julian Elischer
9b7408fe46 There is no dump routine for fd so give it an explicit NULL entry
in the SLICE table.
1998-05-06 23:35:36 +00:00
Julian Elischer
7f2f1b784e Add dump support to the DEVFS/slice code.
now we can actually catch our crashes :-)

Submitted by: Luoqi Chen <luoqi@chen.ml.org> (the man who's everywhere)
1998-05-06 22:14:48 +00:00
Poul-Henning Kamp
b4362367e0 Detect USR PnP x2 modem.
PR:		6496
Reviewed by:	phk
Submitted by:	Kurt D. Zeilenga <Kurt@Boolean.NET>
1998-05-04 10:35:13 +00:00
Julian Elischer
26d3bf5f1b close() is no longer a SLICE method.
Close is simply an open with no-read and no-write once internal to SLICE
(it still exports a close to the rest of the kernel)
1998-04-22 10:25:27 +00:00
Julian Elischer
3e425b968d Add changes and code to implement a functional DEVFS.
This code will be turned on with the TWO options
DEVFS and SLICE. (see LINT)
Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes.

/dev will be automatically mounted by init (thanks phk)
on bootup. See /sys/dev/slice/slice.4 for more info.
All code should act the same without these options enabled.

Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others

This code does not support the following:
bad144 handling.
Persistance. (My head is still hurting from the last time we discussed this)
ATAPI flopies are not handled by the SLICE code yet.

When this code is running, all major numbers are arbitrary and COULD
be dynamically assigned. (this is not done, for POLA only)
Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
Dag-Erling Smørgrav
dc73342347 Seventy-odd "its" / "it's" typos in comments fixed as per kern/6108. 1998-04-17 22:37:19 +00:00
Dag-Erling Smørgrav
cc88e287a6 Stop the screensaver before switching consoles. 1998-04-17 10:03:11 +00:00
Dag-Erling Smørgrav
604d46b6e5 Swapped "should we just return" and "should we stop the screensaver"
in scrn_timer() to avoid deadlock with graphical screensavers.
1998-04-16 09:41:55 +00:00
Tor Egge
c547ef5cd4 Remove some unneeded statements that enabled interrupts. 1998-04-05 01:04:48 +00:00
Kazutaka YOKOTA
a117d26a3d More fixes to deal with fonts:
- Set the correct value scp->font_size in init_scp().
- Set scp->font_size to FONT_NONE for VGA_MODEX.

Interim fix for a font problem:
- A kludge to display the correct font on some video cards.
  We should be able to load multiple fonts to the VGA plane #2 and switch
  between fonts by setting the font select register in the VGA sequencer.
  It appears that the current code isn't functioning as expected on
  some VGA cards (I have reports on Millenium and Mach64 cards).  This is
  either a bug in syscons or a hardware compatibility problem ;-<
  This kludge will always load only one font set at a time and always use
  the font page #0 on the plane #2.  It is an interim kludge until
  we find the exact cause and solution.

Small adjustment for mouse cursor handling:
- Turn off the mouse cursor early when changing video modes.

Video mode switch fixes:
- Stop the screen saver when changing video modes.
- Enclose the critical section with a pair of spltty()/splx().
- A kludge to prevent scrn_update() from accessing video memory in less-
  critical sections in video mode change; artificially turn on the
  UNKNOWN_MODE flag.

PR: bin/5899, bin/5907
Tested by: ache and a couple of users
OKed by: sos
1998-04-04 16:26:53 +00:00
Poul-Henning Kamp
00af9731c9 Time changes mark 2:
* Figure out UTC relative to boottime.  Four new functions provide
      time relative to boottime.

    * move "runtime" into struct proc.  This helps fix the calcru()
      problem in SMP.

    * kill mono_time.

    * add timespec{add|sub|cmp} macros to time.h.  (XXX: These may change!)

    * nanosleep, select & poll takes long sleeps one day at a time

Reviewed by:    bde
Tested by:      ache and others
1998-04-04 13:26:20 +00:00
Poul-Henning Kamp
227ee8a188 Eradicate the variable "time" from the kernel, using various measures.
"time" wasn't a atomic variable, so splfoo() protection were needed
around any access to it, unless you just wanted the seconds part.

Most uses of time.tv_sec now uses the new variable time_second instead.

gettime() changed to getmicrotime(0.

Remove a couple of unneeded splfoo() protections, the new getmicrotime()
is atomic, (until Bruce sets a breakpoint in it).

A couple of places needed random data, so use read_random() instead
of mucking about with time which isn't random.

Add a new nfs_curusec() function.

Mark a couple of bogosities involving the now disappeard time variable.

Update ffs_update() to avoid the weird "== &time" checks, by fixing the
one remaining call that passwd &time as args.

Change profiling in ncr.c to use ticks instead of time.  Resolution is
the same.

Add new function "tvtohz()" to avoid the bogus "splfoo(), add time, call
hzto() which subtracts time" sequences.

Reviewed by:	bde
1998-03-30 09:56:58 +00:00
Bruce Evans
08637435f2 Moved some #includes from <sys/param.h> nearer to where they are actually
used.
1998-03-28 10:33:27 +00:00
Poul-Henning Kamp
7ab95d0bab Be less draconian about the TSC if APM is configured, use it for
timecounting if APM-BIOS isn't found.
Be just as draconian about SMP as always, but explain it better.
1998-03-16 10:06:58 +00:00
Tor Egge
c555a715f5 On SMP systems, initially follow the MP spec with regard to which pin
on the IOAPIC being connected to the 8254 timer interrupt.
Verify that timer interrupts are delivered. If they aren't, attempt
a fallback to mixed mode (i.e. routing the timer interrupt via the 8259 PIC).
1998-03-14 03:11:50 +00:00
Tor Egge
5dd528cd4e Remove special handling for resuming clock interrupt when using APIC_IO.
The `generic' vector stubs do the right thing.
1998-03-05 21:45:53 +00:00
Poul-Henning Kamp
3301c800f5 Prevent the TSC from being used on APM machines, we have no idea if
it runs at a constant frequency.  This was less of an issue before,
because the TSC only interpolated in the HZ intervals, but now where
the timecounter is used all the way, this becomes much more visible.

Nit: Fix a printf which triggered the bde-filter.
1998-02-28 21:16:13 +00:00
Mike Smith
47959c89b9 PCCARD-code related style nits, as requested.
Submitted by:	bde
1998-02-27 06:39:32 +00:00
Mike Smith
9a70f9f75f Fix some style nits and remove an unused header.
Submitted by:	bde
1998-02-27 05:38:32 +00:00
Bruce Evans
168be6199e Quick fix for the i8254 timecounter often gaining 10 msec. 1998-02-23 00:11:25 +00:00
Jordan K. Hubbard
6bf2dcfc50 Add missing CLOCK_UNLOCK() before write_eflags().
Submitted by:	dave adkins <adkin003@tc.umn.edu>
1998-02-21 20:45:27 +00:00
Poul-Henning Kamp
7ec73f6417 Replace TOD clock code with more systematic approach.
Highlights:
    * Simple model for underlying hardware.
    * Hardware basis for timekeeping can be changed on the fly.
    * Only one hardware clock responsible for TOD keeping.
    * Provides a real nanotime() function.
    * Time granularity: .232E-18 seconds.
    * Frequency granularity:  .238E-12 s/s
    * Frequency adjustment is continuous in time.
    * Less overhead for frequency adjustment.
    * Improves xntpd performance.

Reviewed by:    bde, bde, bde
1998-02-20 16:36:17 +00:00
Nate Williams
a021db1639 - If a PCCARD serial device is removed from the system, let the serial
driver 'break out' of the infinite loop waiting for a response from
  it.  This is a bad thing, but no worse than having the kernel hang.
1998-02-14 16:17:17 +00:00
Poul-Henning Kamp
aa7caaaeb8 Fix a couple of lines that dropped out in my merge yesterday.
Complained about by:	ache
1998-02-13 17:54:53 +00:00
Poul-Henning Kamp
a4daaa09f2 Implement the spirit but not the letter of Terrys hot-char patch.
The differences Terrys patch and this patch are:
 * Remove a lot of un-needed comments.
 * Don't put l_hotchar at the front of stuct linesw, there is no need to.
 * Use the #defines for the hotchar in the SLIP and PPP line disciplines
1998-02-13 12:46:28 +00:00
Poul-Henning Kamp
a744622f69 Hmm, it is generally an advantage to commit the most recent version of
ones changes:  A faster character painter procedure and fix on cursor
bug.
1998-02-13 11:31:34 +00:00
Bruce Evans
5883bcc9d2 Don't (conditionally) override the kernel's min() and max() functions
with macros.  This breaks if the functions are replaced by macros with
unsuitable semantics.   Define a MAX() macro unconditionally instead.
max() is unsuitable since we need a constant expression.  Don't define
MIN() - we never used min().
1998-02-13 07:09:38 +00:00
Bruce Evans
1d804e7925 Update timer0_prescaler_count before calling hardclock() while timer0
is "acquired".  This fixes a TSC biasing error of about 10 msec when
pcaudio is active.

Update `time' before calling hardclock() when timer0 is being released.
This is not known to be important.

Added some delays in writertc().  Efficiency is not critical here, unlike
in rtcin(), and we already use conservative delays there.

Don't touch the hardware when machdep.i8254_freq is being changed but
the maximum count wouldn't change.  This fixes jitter of up to 10 msec
for most small adjustments to machdep.i8254_freq.  When the maximum
count needs to change, the hardware should be adjusted more carefully.
1998-02-13 06:33:16 +00:00
Poul-Henning Kamp
8a69c85a7e Add support for VESA mode 0x102 (800x600x4) in syscons. You can activate
this using option "-b" to the boot blocks.  It is smartest to compile
a font into your kernel (See LINT), but not mandatory, but apart from
the cursor you will see nothing on the screen until you load a font.

This mode allows XF86_VGA16 to run in 800x600 mode on otherwise unsupported
graphics hardware.

A number of buglets in the cursor handling in syscons may become
visible this way.
1998-02-12 22:05:08 +00:00
Poul-Henning Kamp
b9483c6b9b Fix a white-space nit which I happened to notice. 1998-02-12 20:52:24 +00:00
Kazutaka YOKOTA
409bd75190 Oops, sorry, a #define line for my debugging session slipped into
the last commit ;-<
1998-02-12 16:35:11 +00:00
Kazutaka YOKOTA
1ee1681798 - Move the mouse cursor to the center of the screen after video
mode switch in ioctl.
Possibly related to PR: kern/4271

- A kludge: initialize scp->xpixel and ypixel even in the text mode.
If the console enters the `unknown' graphics mode via the ioctl KDSETMODE
(KD_GRAPHICS), these fields are not set (because syscons cannot know
the correct values), but set_mouse_pos() need to refer to these field
to adjust the mouse position.

- Turn off MOUSE_VISIBLE when switching video mode by ioctl.

- another new option: SC_MOUSE_CHAR
Define the first character code of four consecutive codes to be used for
the mouse cursor.  Default codes are 0xd0 through 0xd3.  Beware that
if you decide to use any codes outside the range of 0xc0-0xdf,
the mouse cursor may not look good, because of the way VGA displays
characters in 9-dot-wide character cells.
Requested by several people.

(This patch was tested by a person who recently reported, in the -current
ML, a page fault problem in the kernel (draw_mouse_iamge()) after
X server shutdown. The patch cured his problem.)
1998-02-11 15:02:40 +00:00
Kazutaka YOKOTA
59f5eaf466 - A new semaphore: font_loading_in_progress.
Don't touch/update the screen while manipulating font data.
Possibly related to PR: kern/4271

- Set up VGA in alphanumeric mode rather than graphics mode when
loading font into video memory. This will drastically reduce flicker.
PR: bin/2977

- Set up scp->font_size properly during video mode switch caused by
ioctl.
1998-02-11 15:00:24 +00:00
Kazutaka YOKOTA
f8a35e9cef - Break scrn_timer() into two pieces. Now screen update is done in a
separate routine: scupdate() called from scrn_timer().

- Make sure that the screen is updated for the low-level console
routines sccngetc() and sccncheckc().  A new routine, sccnupdate(),
is introduced and will call scupdate() above.
Requested by: bde and msmith

OKed by: sos
1998-02-11 14:58:15 +00:00
Kazutaka YOKOTA
4930cbfa04 - Ignore KBD_RAW_MODE and KBD_CODE_MODE in scgetc() when it's called
from the low-level console routines sccngetc() and sccncheckc().
Submitted by: bde (a long time ago)

- Don't try to ring bell and immediately return from do_bell() while
device probe is in progress at boot time; the timeout queue is not
functional yet.
PR: kern/2424

- Stop running the screen saver after panic() is called: check
if `panicstr' is non-NULL during scrn_timer().
PR: kern/5314

- A new option: SC_DISABLE_REBOOT
The reboot key (usually Ctl-Alt-Del) will be ignored if this option
is defined. You may still have the reboot key defined in the keymap and
it won't cause error when the keymap is loaded, but it will be quietly
treated as nop.

OKed by: sos
1998-02-11 14:56:02 +00:00
Eivind Eklund
303b270b0a Staticize. 1998-02-09 06:11:36 +00:00
Poul-Henning Kamp
53dd848c82 APM calls inittodr(0) which is stupid, but at least stop setting the
clock back to when Dennis had a good idea.
1998-01-28 10:41:33 +00:00
Kazutaka YOKOTA
ef65ade83a Define CTL-ALT-ESC as the debug' key, CTL-ALT-SPACE as the suspend'key
in all built-in keymaps.
1998-01-28 08:45:18 +00:00
Eivind Eklund
7b778b5e61 Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style.
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)

LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
Kazutaka YOKOTA
6c401d343f - Add binary compatibility support for obsolete console/mouse ioctls
so that existing programs which were compiled before the introduction
  of the new mouse code and use these ioctls will run unmodified.

Suggested by msmith.
1998-01-20 03:37:27 +00:00
Kazutaka YOKOTA
4d76195ef5 Fix illegal numeric expressions: 08 and 09. 1998-01-12 23:54:51 +00:00
Julian Elischer
eae4f847a7 add devfs entries for a few more syscons devices (e.g. sysmouse) 1998-01-12 03:28:36 +00:00
Kazutaka YOKOTA
363f670991 - Produce the accent letter if the user hits the accent key twice.
(accent_key + space does still print the accent letter too, as in
  the previous commit.)
  Requested by a couple of users.
- Clear the accent flag when the next_screen key is pressed.
- Added some comment lines regarding accent key processing.
1998-01-09 09:06:55 +00:00