Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.
Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw
Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.
Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes
with no creative content. Include "lost" changes from git:
o Use /dev/efi instead of /dev/efidev
o Remove redundant NULL checks.
Submitted by: kib@, dim@, zbb@, emaste@
to add actions that run when a TCP frame is sent or received on a TCP
session in the ESTABLISHED state. In the base tree, this functionality is
only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,
and cc_vegas congestion control modules.
Presently, we incur overhead to check for hooks each time a TCP frame is
sent or received on an ESTABLISHED TCP session.
This change adds a new compile-time option (TCP_HHOOK) to determine whether
to include the hhook(9) framework for TCP. To retain backwards
compatibility, I added the TCP_HHOOK option to every configuration file that
already defined "options INET". (Therefore, this patch introduces no
functional change. In order to see a functional difference, you need to
compile a custom kernel without the TCP_HHOOK option.) This change will
allow users to easily exclude this functionality from their kernel, should
they wish to do so.
Note that any users who use a custom kernel configuration and use one of the
congestion control modules listed above will need to add the TCP_HHOOK
option to their kernel configuration.
Reviewed by: rrs, lstewart, hiren (previous version), sjg (makefiles only)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D8185
Move PMAP_TS_REFERENCED_MAX out of the various pmap implementations and
into vm/pmap.h, and describe what its purpose is. Eliminate the archaic
"XXX" comment about its value. I don't believe that its exact value, e.g.,
5 versus 6, matters.
Update the arm64 and riscv pmap implementations of pmap_ts_referenced()
to opportunistically update the page's dirty field.
On amd64, use the PDE value already cached in a local variable rather than
dereferencing a pointer again and again.
Reviewed by: kib, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D7836
Idle page zeroing has been disabled by default on all architectures since
r170816 and has some bugs that make it seemingly unusable. Specifically,
the idle-priority pagezero thread exacerbates contention for the free page
lock, and yields the CPU without releasing it in non-preemptive kernels. The
pagezero thread also does not behave correctly when superpage reservations
are enabled: its target is a function of v_free_count, which includes
reserved-but-free pages, but it is only able to zero pages belonging to the
physical memory allocator.
Reviewed by: alc, imp, kib
Differential Revision: https://reviews.freebsd.org/D7714
RISC-V cpu implementations.
o Update RocketChip device tree source (DTS).
We now support latest verison of RocketChip synthesized on
Xilinx FPGA (Zedboard).
RocketChip is an implementation of RISC-V processor written on
Chisel hardware construction language.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Machine privilege level was specially designed to use in vendor's
firmware or bootloader. We have implemented operation in machine
mode in FreeBSD as part of understanding RISC-V ISA, but it is time
to remove it.
We now use BBL (Berkeley Boot Loader) -- standard RISC-V firmware,
which provides operation in machine mode for us.
We now use standard SBI calls to machine mode, instead of handmade
'syscalls'.
o Remove HTIF bus.
HTIF bus is now legacy and no longer exists in RISC-V specification.
HTIF code still exists in Spike simulator, but BBL do not provide
raw interface to it.
Memory disk is only choice for now to have multiuser booted in Spike,
until Spike has implemented more devices (e.g. Virtio, etc).
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
threads, to make it less confusing and using modern kernel terms.
Rename the functions to reflect current use of the functions, instead
of the historic KSE conventions:
cpu_set_fork_handler -> cpu_fork_kthread_handler (for kthreads)
cpu_set_upcall -> cpu_copy_thread (for forks)
cpu_set_upcall_kse -> cpu_set_upcall (for new threads creation)
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (hrs)
Differential revision: https://reviews.freebsd.org/D6731
(the value we had before supervisor exception occurred).
This helps consumers (e.g. DTrace) to not proceed additional calculations.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
memory system.
RISC-V ISA has only single page table base register for both kernel
and user addresses translation. Before this commit we were using an
extra (4th) level of pagetables for switching between kernel and user
pagetables, but then realized FPGA hardware has 3-level page system
hardcoded. It is also become clear that the bitfile synthesized for
4-level system is untested/broken, so we can't use extra level for
switching.
We are now share level 1 of pagetables between kernel and user VA.
This requires to keep track of all the user pmaps created and once we
adding L1 page to kernel pmap we have to add it to all the user pmaps.
o Change the VM layout as we must have topmost bit to be 1 in the
selected page system for kernel addresses and 0 for user addresses.
o Implement pmap_kenter_device().
o Create the l3 tables for the early devmap.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Sounds strange, but both RocketCore and lowRISC do not operate
if we set it.
All the known implementations (Spike, QEMU, RocketCore, lowRISC) uses
default machine trap vector address and operates fine with this.
Original Berkeley Boot Loader (bbl) does not set this as well.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
There is no need to clear all the DDR memory (we only need to clear
BSS section).
I was playing with non-default version of hardware (the bitfile
synthesized for 4-level page memory system) and clearing was helpful,
but then realized support for 4-level page system is untested/broken
in both RocketCore and lowRISC.
Summary:
As part of the migration of rman_res_t to be typed to uintmax_t, memory ranges
must be clamped appropriately for the bus, to prevent completely bogus addresses
from being used.
This is extracted from D4544.
Reviewed By: cem
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5134
Use u_long instead of uint32_t variables to avoid overflow
in case of PA space bigger than 32-bit.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Approved by: cognet (mentor)
Reviewed by: andrew, br, wma
Differential revision: https://reviews.freebsd.org/D5393
o Implement growkernel bits for L1 level of pagetables.
This allows us to boot with 128GB of physical memory.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Tested on Spike simulator with 2 and 16 cores (tlb enabled),
so set MAXCPU to 16 at this time.
This uses FDT data to get information about CPUs
(code based on arm64 mp_machdep).
Invalidate entire TLB cache as it is the only way yet.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
need to include it explicitly when <vm/vm_param.h> is already included.
Suggested by: alc
Reviewed by: alc
Differential Revision: https://reviews.freebsd.org/D5379
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.
This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.
Discussed with: jhb
Suggested by: marcel
o Add kernel configuration for QEMU.
Both SPIKE and QEMU kernel configs are temporary (until
we will be able to obtain DTB from loader).
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
This fixes operation in QEMU and saves some booting time as well.
Pointed out by: Sagar Karandikar <skarandikar@berkeley.edu>
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
gp (global pointer) is used by compiler in userland only,
so re-use it for pcpup in kernel, save it on stack on switching
out to userland and load back on return to kernel.
Discussed with: jhb, andrew, kib
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D5178
This is the final step required allowing to compile and to run RISC-V
kernel and userland from HEAD.
RISC-V is a completely open ISA that is freely available to academia
and industry.
Thanks to all the people involved! Special thanks to Andrew Turner,
David Chisnall, Ed Maste, Konstantin Belousov, John Baldwin and
Arun Thomas for their help.
Thanks to Robert Watson for organizing this project.
This project sponsored by UK Higher Education Innovation Fund (HEIF5) and
DARPA CTSRD project at the University of Cambridge Computer Laboratory.
FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv
Reviewed by: andrew, emaste, kib
Relnotes: Yes
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4982
