correctly. The 256MB segment is formed by taking the top 4 bits
of the address of the instruction in the "branch delay" slot
as opposed to the 'J' or 'JAL' instruction itself.
Approved by: imp (mentor)
PAGE_SIZE to (2 * PAGE_SIZE). It depends on the memory allocated by
pmap_steal_memory() being aligned to a PAGE_SIZE boundary.
Approved by: imp (mentor)
This replaces d_mmap() with the d_mmap2() implementation and also
changes the type of offset to vm_ooffset_t.
Purge d_mmap2().
All driver modules will need to be rebuilt since D_VERSION is also
bumped.
Reviewed by: jhb@
MFC after: Not in this lifetime...
here yet, so I've not connected it to the build. I think that we'll
need to move something into the processor specific part of the mips
port by requiring mips_cpu_ptrace or platform_cpu_ptrace be provided
by the ports to get/set processor specific registers, ala SSE
registers on x86.
statement. When no caches support was added, it looks like
TARGET_OCTEON was bogusly moved inside the if. Also, include
opt_cputype.h to make TARGET_OCTEON actually active.
# now we die in pmap init somewhere... Most likely because 32MB of RAM is
# too tight given the load address we're using.
o Introduce a uart bus space so that we don't have to hack dev/uart to do 8
byte reads. This also handles the shift properly, so reset the shift we
want dev/uart doing to 0. In effect, this bus space makes the octeon
registers have an interface to dev/uart that looks just like the old ISA
bus, but does the necessary 64-bit read/write to the bus. We only support
read/write operations. We do all the widths, but likely could get away
with only 64-bit and 8-bit given the restricted nature of use of this bus.
o use bus_space_map to set the .bsh rather than a direct assignment.
o Minor cleanup of uart_cpu_getdev to make it conform more to the other
implementations.
o Add some coments for future work.
# with these changes, we now make it through cninit, but there's still some
# problem that's preventing output, as well as another problem that causes
# us to call panic just after we return from cninit() in platform_start.
cacheable window on physical memory (KSEG0). On the Sibyte processor
going through the uncacheable window (KSEG1) bypasses both L1 and L2
caches so we may end up with stale contents in the L2 cache.
This also makes it consistent with the rest of the function that
uses cacheable mappings to copy pages.
Approved by: imp (mentor)
fixed-state media with parameters set via hints
and configure MAC accordingly to these parameters.
All the underlying PHY magic is done by boot manager
on startup. At the moment there is no proper way
to make active and control all PHYs simultaneously
from one MII bus and there is no way to associate
incoming/outgoing packet with specific PHY.
original codes (I had changed one by accident)
Also do the pic_ack/pic_delayed_ack after the interrupt
so we clear it. The clock with these changes starts working.
Its off doing a short/long short/long warning but it
now runs.
My NFS mount now works but has the same problem with
sbin/init (errno 8 ENOEXEC) so it panics with no init.
Either this is a problem with my buildworld.. OR its a
yet undiscovered RMI issue.
- Move dpcpu initialization to mips_proc0_init. It's
more appropriate place for it. Besides dpcpu_init
requires pmap module to be initialized and calling it
int pmap.c hangs the system
the mi_startup (or to the last of it).. and
hit a panic after :
uart0: <16550 or compatible> on iodi0
Trap cause = 2 (TLB miss....)
I did have to take the pci bus OUT of the
build to get this far, hit a cache error with
the PCI code in. Interesting thing is the machine
reboots too ;-)
addresses and could modify areas of memory that share the same cache
line at the beginning and at the ending of the buffer. In order to
prevent a data loss we save these chunks in temporary buffer before
invalidation and restore them afer it.
Idea suggested by: cognet
while in kernel mode, and later changing signal mask to block the
signal, was fixed for sigprocmask(2) and ptread_exit(3). The same race
exists for sigreturn(2), setcontext(2) and swapcontext(2) syscalls.
Use kern_sigprocmask() instead of direct manipulation of td_sigmask to
reschedule newly blocked signals, closing the race.
Reviewed by: davidxu
Tested by: pho
MFC after: 1 month
The "_MTC0 v0, COP_0_TLB_HI" is actually incorrect because v0 has not been
initialized at that point. It worked correctly because we subsequently
did the right thing and initialized TLB_HI correctly.
The "li v0, MIPS_KSEG0_START" is redundant because we do exactly the same
thing 2 instructions down.
Approved by: imp (mentor)
SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE
Instead we now keep a copy of the memory regions enumerated by
platform-specific code and use that to determine whether an address
is cacheable or not.
Approved by: imp (mentor)
the memory or D-cache, depending on the semantics of the platform.
vm_sync_icache() is basically a wrapper around pmap_sync_icache(),
that translates the vm_map_t argumument to pmap_t.
o Introduce pmap_sync_icache() to all PMAP implementation. For powerpc
it replaces the pmap_page_executable() function, added to solve
the I-cache problem in uiomove_fromphys().
o In proc_rwmem() call vm_sync_icache() when writing to a page that
has execute permissions. This assures that when breakpoints are
written, the I-cache will be coherent and the process will actually
hit the breakpoint.
o This also fixes the Book-E PMAP implementation that was missing
necessary locking while trying to deal with the I-cache coherency
in pmap_enter() (read: mmu_booke_enter_locked).
The key property of this change is that the I-cache is made coherent
*after* writes have been done. Doing it in the PMAP layer when adding
or changing a mapping means that the I-cache is made coherent *before*
any writes happen. The difference is key when the I-cache prefetches.
in cpu_switch and use it in stack_trace function later. pcb_regs contains
state of the process stored by exception handler and therefor is not
valid for sleeping processes.
Context info could be obtained from other sources (see below) no only from
td_pcb field
- Do not show a0..a3 values unless they're obtained from the stack. These
are only confirmed values.
- Fix bt command in DDB. Previous implementation used thread's trapframe
structure as a source info for trace unwinding, but this structure
is filled only when exception occurs. Valid register values for sleeping
processes are in pcb_context array. For curthread use pc/sp/ra for current
frame
compile and many of them may disappear. For example
the xlr_boot1_console.c is old code that is ifdef'd out.
I will clean these sorts of things up as I make progress
on the port. So far the only thing I have I think straightened
out is the bits around the interupt handling... and hey that
may be broke ;-)
1) Adds future RMI directories
2) Places intr_machdep.c in specfic files.arch pointing to the generic
intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c
(which we will need for RMI) in the machine specific directory
3) removes intr_machdep.c from files.mips
4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We
may need to look at finding a better place to put this. But first I want to
get this thing compiling.
by looking at the bases used for non-relocatable executables by gnu ld(1),
and adjusting it slightly.
Discussed with: bz
Reviewed by: kan
Tested by: bz (i386, amd64), bsam (linux)
MFC after: some time
first and the native ia32 compat as middle (before other things).
o(ld)brandinfo as well as third party like linux, kfreebsd, etc.
stays on SI_ORDER_ANY coming last.
The reason for this is only to make sure that even in case we would
overflow the MAX_BRANDS sized array, the native FreeBSD brandinfo
would still be there and the system would be operational.
Reviewed by: kib
MFC after: 1 month
like we do in Malta. We may want to look at consolidating things
because *ALL* mips will *ALWAYS* be memory mapped. The only wrinkle
is that the tag may need to be a custom one (see endian issues with
the Atheros port for one example).
former works for both ILP32 and LP64 programming models, while the
latter fails LP64.
# uintpr_t is better, but iirc, we can't pollute the name space to use it
# I likely need to audit all my uintptr_t changes for that issue...
has proven to have a good effect when entering KDB by using a NMI,
but it completely violates all the good rules about interrupts
disabled while holding a spinlock in other occasions. This can be the
cause of deadlocks on events where a normal IPI_STOP is expected.
* Adds an new IPI called IPI_STOP_HARD on all the supported architectures.
This IPI is responsible for sending a stop message among CPUs using a
privileged channel when disponible. In other cases it just does match a
normal IPI_STOP.
Right now the IPI_STOP_HARD functionality uses a NMI on ia32 and amd64
architectures, while on the other has a normal IPI_STOP effect. It is
responsibility of maintainers to eventually implement an hard stop
when necessary and possible.
* Use the new IPI facility in order to implement a new userend SMP kernel
function called stop_cpus_hard(). That is specular to stop_cpu() but
it does use the privileged channel for the stopping facility.
* Let KDB use the newly introduced function stop_cpus_hard() and leave
stop_cpus() for all the other cases
* Disable interrupts on CPU0 when starting the process of APs suspension.
* Style cleanup and comments adding
This patch should fix the reboot/shutdown deadlocks many users are
constantly reporting on mailing lists.
Please don't forget to update your config file with the STOP_NMI
option removal
Reviewed by: jhb
Tested by: pho, bz, rink
Approved by: re (kib)
a device pager (OBJT_DEVICE) object in that it uses fictitious pages to
provide aliases to other memory addresses. The primary difference is that
it uses an sglist(9) to determine the physical addresses for a given offset
into the object instead of invoking the d_mmap() method in a device driver.
Reviewed by: alc
Approved by: re (kensmith)
MFC after: 2 weeks
dependent memory attributes:
Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the
fact that there are machine-dependent memory attributes that have
nothing to do with controlling the cache's behavior.
Introduce vm_object_set_memattr() for setting the default memory
attributes that will be given to an object's pages.
Introduce and use pmap_page_{get,set}_memattr() for getting and
setting a page's machine-dependent memory attributes. Add full
support for these functions on amd64 and i386 and stubs for them on
the other architectures. The function pmap_page_set_memattr() is also
responsible for any other machine-dependent aspects of changing a
page's memory attributes, such as flushing the cache or updating the
direct map. The uses include kmem_alloc_contig(), vm_page_alloc(),
and the device pager:
kmem_alloc_contig() can now be used to allocate kernel memory with
non-default memory attributes on amd64 and i386.
vm_page_alloc() and the device pager will set the memory attributes
for the real or fictitious page according to the object's default
memory attributes.
Update the various pmap functions on amd64 and i386 that map pages to
incorporate each page's memory attributes in the mapping.
Notes: (1) Inherent to this design are safety features that prevent
the specification of inconsistent memory attributes by different
mappings on amd64 and i386. In addition, the device pager provides a
warning when a device driver creates a fictitious page with memory
attributes that are inconsistent with the real page that the
fictitious page is an alias for. (2) Storing the machine-dependent
memory attributes for amd64 and i386 as a dedicated "int" in "struct
md_page" represents a compromise between space efficiency and the ease
of MFCing these changes to RELENG_7.
In collaboration with: jhb
Approved by: re (kib)
that takes into account all limitation to DMA memory (boundaries,
alignment) and implements bounce pages.
- Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf
(1) fix printf formats.
(2) Prefer FreeBSD's MIPS_PHYS_TO_KSEG0 to hand-rolled one from Cavium.
(3) Mark a few 64-bit cleanliness issues (possible).
(4) Minor formatting fixes.
o add to platforms where it was missing (arm, i386, powerpc, sparc64, sun4v)
o define as "1" on amd64 and i386 where there is no restriction
o make the type returned consistent with ALIGN
o remove _ALIGNED_POINTER
o make associated comments consistent
Reviewed by: bde, imp, marcel
Approved by: re (kensmith)
# Note: Cavium provided a port that has atomics similar to these, but
# that does a syncw; sync; atomic; sync; syncw where we just do the classic
# mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why
# the extra is needed. Since my initial target is one core, I'll defer
# investigation until I bring up multiple cores. syncw is an octeon specific
# instruction.
them to void * first. This neatly solves the "how do I print a
register_t" problem because sizeof(void *) is always the same as
sizeof(register_t), afaik.
