a sub-node of nexus (ofwbus) rather than direct attach under nexus. This
fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier.
SPARC is unchanged.
Reviewed by: imp, ian
This also fixes asserts on removal of the module for the mpc74xx.
The PowerPC 970 processors have two different types of events: direct events
and indirect events. Thus far only direct events are supported. I included
some documentation in the driver on how indirect events work, but support is
for the future.
MFC after: 1 month
the actual FPU is enabled, while PCB_FPREGS indicates that the FPU state
structure in the PCB is valid. This separation reflects the situation on
FPU-less systems in which the FP state is used by the emulator but we don't
actually want to try to turn on the non-existant FPU.
Use this flag to save and restore FP regs properly on both AIM and Book-E.
As a side effect, this sets up hard-FP and Altivec on Book-E CPUs with such
abilities except for a trap handler to call enable_fpu()/enable_altivec().
a variant PCI bus instead of trying to shoehorn it into the PCI host bridge
adapter. Besides matching better the architecture on other platforms, this
also allows systems with multiple partitionable endpoints per PCI host
bridge to work correctly.
PCPU fields for curthread, by doing the same to Book-E. This closes
some potential races switching between CPUs. As a side effect, it turns out
the AIM and Book-E swtch.S implementations were the same to within a few
registers, so move that to powerpc/powerpc.
MFC after: 3 months
add actual platform probing based on PVR. Still needs a little more work:
in particular, the CCRS setup should move here.
Also turn "bare" into a truly bare platform that doesn't pretend to know how
to do anything except get the memory map. This should also be enhanced to
process the FDT reserved memory list, but that is for another day.
assumed that the MDIO bus was a direct child of the Ethernet interface. It
may not be and indeed on many device trees is not. While here, add proper
locking for MII transactions, which may be on a bus shared by several MACs.
Hardware donated by: Benjamin Perrault
- Use bus reference phandles in place of FDT offsets as IRQ domain keys
- Unify the identical macio/fdt/mambo OpenPIC drivers into one
- Be more forgiving (following ePAPR) about what we need from the device
tree to identify an OpenPIC
- Correctly map all IRQs into an interrupt domain
- Set IRQ_*_CONFORM for interrupts on an unknown PIC type instead of
failing attachment for that device.
differed only with respect to the AIM version not following style(9) and
some additional features for 64-bit systems and machines with direct maps
in the AIM implementation that are no-ops on Book-E (at least for now).
install directly into standard POWER LPARs, as found for example in
QEMU. The core of this device is the SCSI RDMA protocol as also found in
Infiniband. The SRP portions of the driver will be factored out and placed
/sys/cam in the future to allow them to be used for IB storage. Thanks to
Scott Long for a great deal of implementation help.
Reviewed by: scottl
Approved by: re (kib)
Requirements) systems from the projects/pseries branch. This in principle
includes all IBM POWER hardware released in the last 15 years with the
exception of POWER3-based systems when run in 64-bit mode. The main
development target, however, has been the PAPR logical partition support
that is the default target in KVM on POWER and QEMU -- mileage may vary
on actual hardware at present. Much of the heavy lifting here was done
by Andreas Tobler.
Approved by: re (kib)
- Reconnect with some minor modifications, in particular now selsocket()
internals are adapted to use sbintime units after recent'ish calloutng
switch.
1. Common headers for fdt.h and ofw_machdep.h under x86/include
with indirections under i386/include and amd64/include.
2. New modinfo for loader provided FDT blob.
3. Common x86_init_fdt() called from hammer_time() on amd64 and
init386() on i386.
4. Split-off FDT specific low-level console functions from FDT
bus methods for the uart(4) driver. The low-level console
logic has been moved to uart_cpu_fdt.c and is used for arm,
mips & powerpc only. The FDT bus methods are shared across
all architectures.
5. Add dev/fdt/fdt_x86.c to hold the fdt_fixup_table[] and the
fdt_pic_table[] arrays. Both are empty right now.
FDT addresses are I/O ports on x86. Since the core FDT code does
not handle different address spaces, adding support for both I/O
ports and memory addresses requires some thought and discussion.
It may be better to use a compile-time option that controls this.
Obtained from: Juniper Networks, Inc.
Add a simplebus attachment for cfi(4)'s FDT support and move
cfi_bus_fdt.c to sys/conf/files so non-ppc architectures are supported.
Sponsored by: DARPA, AFRL
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.
In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.
Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.
This is not targeted for MFC.
reach single user mode using a memory disk device as the file system.
This port includes the framebuffer driver, the PIC driver, a platform
driver and the GPIO driver. The IPC driver (to talk to IOS kernels) is
not yet written but there's a placeholder for it.
There are still some MMU problems and to get a working system you need to
patch locore32.S. Since we haven't found the best way yet to address that
problem, we're not committing those changes yet. The problem is related to
the different BAT layout on the Wii and to the fact that the Homebrew
loader doesn't clean up the special registers (including the 8 BATs)
before passing control to us.
You'll need a Wii with Homebrew loader and a TV that can do NTSC (for now).
Submitted by: Margarida Gouveia
This driver does not yet handle multiple chip selects properly.
Note that the NAND infrastructure does not perform full page
reads or writes, which means that this driver cannot make use
of the hardware ECC that is otherwise present.
usermode, using shared page. The structures and functions have vdso
prefix, to indicate the intended location of the code in some future.
The versioned per-algorithm data is exported in the format of struct
vdso_timehands, which mostly repeats the content of in-kernel struct
timehands. Usermode reading of the structure can be lockless.
Compatibility export for 32bit processes on 64bit host is also
provided. Kernel also provides usermode with indication about
currently used timecounter, so that libc can fall back to syscall if
configured timecounter is unknown to usermode code.
The shared data updates are initiated both from the tc_windup(), where
a fast task is queued to do the update, and from sysctl handlers which
change timecounter. A manual override switch
kern.timecounter.fast_gettime allows to turn off the mechanism.
Only x86 architectures export the real algorithm data, and there, only
for tsc timecounter. HPET counters page could be exported as well, but
I prefer to not further glue the kernel and libc ABI there until
proper vdso-based solution is developed.
Minimal stubs neccessary for non-x86 architectures to still compile
are provided.
Discussed with: bde
Reviewed by: jhb
Tested by: flo
MFC after: 1 month
implementation specific vs. the common architecture definition.
Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions under
BOOKE_PPC4XX are not used in the code yet.
This change set is not supposed to affect existing E500 support, it's just
another reorg step before bringing support for E500mc, E5500 and PPC465.
Obtained from: AppliedMicro, Freescale, Semihalf
The 'make depend' rules have to use custom -I paths for the special compat
includes for the opensolaris/zfs headers.
This option will pull in the couple of files that are shared with dtrace,
but they appear to correctly use the MODULE_VERSION/MODULE_DEPEND rules
so loader should do the right thing, as should kldload.
Reviewed by: pjd (glanced at)
