These are similar to the mips24k performance counters - some are
available on perfcnt0/3, some are available on perfcnt1/4.
However, the events aren't all the same.
* Add the events, named the same as from Linux oprofile.
* Verify they're the same as "MIPS32(R) 74KTM Processor Core Family
Software User's Manual"; Document Number: MD00519; Revision 01.05.
* Rename INSTRUCTIONS to something else, so it doesn't clash with
the alias INSTRUCTIONS. I'll try to tidy this up later; there
are a few other aliases to add and shuffle around.
Tested:
* QCA9558 SoC (AP135 board) - MIPS74Kc core (no FPU.)
* make universe; where it didn't fail for other reasons.
TODO:
* It'd be nice to support the four performance counters
in at least this hardware, rather than just two.
Reviewed by: bsdimp ("looks good; don't break world".)
specially aml8726-m6 and aml8726-m8b SoC based devices.
aml8726-m6 SoC exist in devices such as Visson ATV-102.
Hardkernel ODROID-C1 board has aml8726-m8b SoC.
The following support is included:
Basic machdep code
SMP
Interrupt controller
Clock control driver (aka gate)
Pinctrl
Timer
Real time clock
UART
GPIO
I2C
SD controller
SDXC controller
USB
Watchdog
Random number generator
PLL / Clock frequency measurement
Frame buffer
Submitted by: John Wehle
Approved by: stas (mentor)
Handle the VIRQ_DEBUG signal and print a stack trace of each vCPU on the Xen
console. This is only used for debug purposes and is triggered by the
administrator of the Xen host.
Sponsored by: Citrix Systems R&D
MFC after: 1 week
common (autogenerated) versions. Removes extra vertical space,
and makes it easier to grep for usage throughout the tree.
Conditionally compile only for arm6 [1] (yes sounds odd but is right).
Submitted by: andrew [1]
Reviewed by: gnn, andrew (ian earlier version I think)
Differential Revision: https://reviews.freebsd.org/D2159
Obtained from: Cambridge/L41
Sponsored by: DARPA, AFRL
duplicated code in the two classes, and also allows devices in FDT-based
systems to declare simplebus as their parent and still work correctly
when the FDT data describes the device at the root of the tree rather
than as a child of a simplebus (which is common for interrupt, clock,
and power controllers).
Differential Revision: https://reviews.freebsd.org/D1990
Submitted by: Michal Meloun
are built by default. You can still override that with MODULES_EXTRA
for experimental features like ZFS and dtrace on some
architectures. Also note that kernel config files are not affected by
MK_ options listed, though some targets might be.
any defaults or user specified actions on the command line. This would
be useful for specifying features that are always broken or that
cannot make sense on a specific architecture, like ACPI on pc98 or
EISA on !i386 (!x86 usage of EISA is broken and there's no supported
hardware that could have it in any event). Any items in
__ALWAYS_NO_OPTIONS are forced to "no" regardless of other settings.
Differential Revision: https://reviews.freebsd.org/D2011
This is pretty much a complete rewrite based on the existing i386 code. The
patches have been circulating for a couple years and have been looked at by
plenty of people, but I'm not putting anybody on the hook as having reviewed
this in any formal sense except myself.
After this has gotten wider testing from the user community, ARM_NEW_PMAP
will become the default and various dregs of the old pmap code will be
removed.
Submitted by: Svatopluk Kraus <onwahe@gmail.com>,
Michal Meloun <meloun@miracle.cz>
Many thanks to ian who gently provided me the DS1307 breakout board.
Tested on: Raspberry pi
Differential Revision: https://reviews.freebsd.org/D2022
Reviewed by: rpaulo
Each plaform performs virtual memory split between kernel and user space
and assigns kernel certain amount of memory space. However, is is sometimes
reasonable to change the default values. Such situation may happen on
systems where the demand for kernel buffers is high, many devices occupying
memory etc. This of course comes with the cost of decreasing user space
memory range so shall be used with care. Most embedded systems will not
suffer from this limtation but rather take advantage of this potential
since default behavior is left unchanged.
Submitted by: Wojciech Macek <wma@semihalf.com>
Reviewed by: imp
Obtained from: Semihalf
translation. In particular, despite IO-APICs only take 8bit apic id,
IR translation structures accept 32bit APIC Id, which allows x2APIC
mode to function properly. Extend msi_cpu of struct msi_intrsrc and
io_cpu of ioapic_intsrc to full int from one byte.
KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid
bringing all dmar headers into interrupt code. The non-PCI(e) devices
which generate message interrupts on FSB require special handling. The
HPET FSB interrupts are remapped, while DMAR interrupts are not.
For each msi and ioapic interrupt source, the iommu cookie is added,
which is in fact index of the IRE (interrupt remap entry) in the IR
table. Cookie is made at the source allocation time, and then used at
the map time to fill both IRE and device registers. The MSI
address/data registers and IO-APIC redirection registers are
programmed with the special values which are recognized by IR and used
to restore the IRE index, to find proper delivery mode and target.
Map all MSI interrupts in the block when msi_map() is called.
Since an interrupt source setup and dismantle code are done in the
non-sleepable context, flushing interrupt entries cache in the IR
hardware, which is done async and ideally waits for the interrupt,
requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is
modified to take a boolean argument requesting busy-wait for the
written sequence number instead of waiting for interrupt.
Some interrupts are configured before IR is initialized, e.g. ACPI
SCI. Add intr_reprogram() function to reprogram all already
configured interrupts, and call it immediately before an IR unit is
enabled. There is still a small window after the IO-APIC redirection
entry is reprogrammed with cookie but before the unit is enabled, but
to fix this properly, IR must be started much earlier.
Add workarounds for 5500 and X58 northbridges, some revisions of which
have severe flaws in handling IR. Use the same identification methods
as employed by Linux.
Review: https://reviews.freebsd.org/D1892
Reviewed by: neel
Discussed with: jhb
Tested by: glebius, pho (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
- Split the driver into independent pf and vf loadables. This is
in preparation for SRIOV support which will be following shortly.
This also allows us to keep a seperate revision control over the
two parts, making for easier sustaining.
- Make the TX/RX code a shared/seperated file, in the old code base
the ixv code would miss fixes that went into ixgbe, this model
will eliminate that problem.
- The driver loadables will now match the device names, something that
has been requested for some time.
- Rather than a modules/ixgbe there is now modules/ix and modules/ixv
- It will also be possible to make your static kernel with only one
or the other for streamlined installs, or both.
Enjoy!
Submitted by: jfv and erj
any defaults or user specified actions on the command line. This would
be useful for specifying features that are always broken or that
cannot make sense on a specific architecture, like ACPI on pc98 or
EISA on !i386 (!x86 usage of EISA is broken and there's no supported
hardware that could have it in any event). Any items in
BROKEN_OPTIONS are forced to "no" regardless of other settings.
Clients are expected change BROKEN_OPTIONS with +=. It will not
be unset, so other parts of the build system can have visibility
into the options that are broken on this platform, though this
should be very rare.
Differential Revision: https://reviews.freebsd.org/D2009
drivers can use it. This avoids some code duplication. Add missing
default case to all switch statements while at it. Also move the
hashing of the IPv6 flow field to layer 4 because the IPv6 flow field
is constant on a per L4 connection basis and not on a per L3 network.
Differential Revision: https://reviews.freebsd.org/D1987
Sponsored by: Mellanox Technologies
MFC after: 1 month
in kern_gzio.c. The old gzio interface was somewhat inflexible and has not
worked properly since r272535: currently, the gzio functions are called with
a range lock held on the output vnode, but kern_gzio.c does not pass the
IO_RANGELOCKED flag to vn_rdwr() calls, resulting in deadlock when vn_rdwr()
attempts to reacquire the range lock. Moreover, the new gzio interface can
be used to implement kernel core compression.
This change also modifies the kernel configuration options needed to enable
userland core dump compression support: gzio is now an option rather than a
device, and the COMPRESS_USER_CORES option is removed. Core dump compression
is enabled using the kern.compress_user_cores sysctl/tunable.
Differential Revision: https://reviews.freebsd.org/D1832
Reviewed by: rpaulo
Discussed with: kib
executables. The goal here, not yet accomplished, is to let the e500 kernel
run under QEMU by setting KERNBASE to something that fits in low memory and
then having the kernel relocate itself at runtime.
Implement the interace to create SR-IOV Virtual Functions (VFs).
When a driver registers that they support SR-IOV by calling
pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov
for that device. An ioctl can be invoked on that device to
create VFs and have the driver initialize them.
At this point, allocating memory I/O windows (BARs) is not
supported.
Differential Revision: https://reviews.freebsd.org/D76
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
I2C real-time clock (RTC).
The DS3231 has an integrated temperature-compensated crystal oscillator
(TXCO) and crystal.
DS3231 has a temperature sensor, an independent 32kHz output (which can be
turned on and off by the driver) and another output that can be used as
interrupt for alarms or as a second square-wave output, which frequency and
operation mode can be set by driver sysctl(8) knobs.
Differential Revision: https://reviews.freebsd.org/D1016
Reviewed by: ian, rpaulo
Tested on: Raspberry pi model B
dtrace is able to display a stack trace similar to the one below.
# dtrace -p 603 -n 'tcp:kernel::receive { stack(); }'
0 70 :receive
kernel`ip_input+0x140
kernel`netisr_dispatch_src+0xb8
kernel`ether_demux+0x1c4
kernel`ether_nh_input+0x3a8
kernel`netisr_dispatch_src+0xb8
kernel`ether_input+0x60
kernel`cpsw_intr_rx+0xac
kernel`intr_event_execute_handlers+0x128
kernel`ithread_loop+0xb4
kernel`fork_exit+0x84
kernel`swi_exit
kernel`swi_exit
Tested by: gnn
Sponsored by: ABT Systems Ltd
KERNBUILDDIR. Come up with some sensible defaults (though listing them
in kmod.mk may be unwise -- we have no easy way to know what are the
best sensible defaults for everything so we just catch the big stuff).
Append SRCS.${opt} for each option in KERN_OPTS to SRCS to allow easy
conditional compilation. Append any notion of KERN_OPTS_EXTRA to the
list of kernel opts.
Differential Revision: https://reviews.freebsd.org/D1530
this option from all modules that enable it theirselves.
In C mode -fms-extensions option enables anonymous structs and unions,
allowing us to use this C11 feature in kernel. Of course, clang supports
it without any extra options.
Reviewed by: dim
used by other places that expect to unwind the stack, e.g. dtrace and
stack(9).
As I have written most of this code I'm changing the license to the
standard FreeBSD license. I have received approval from the other
developers who have changed any of the affected code.
Approved by: ian, imp, rpaulo, eadler (all license change)
Highlights:
- Multiple verbs API updates
- Support for RoCE, RDMA over ethernet
All hardware drivers depending on the common infiniband stack has been
updated aswell.
Discussed with: np @
Sponsored by: Mellanox Technologies
MFC after: 1 month
has been removed and the driver has been greatly simplified and
optimised for FreeBSD. The driver is currently not built by default.
Requested by: Bruce Simpson <bms@fastmail.net>
This port failed to gain traction and probably only a couple Wii consoles
ran FreeBSD all the way to single user mode with an md(4). IPC
support was never implemented, so it was impossible to use any peripheral
Any further development, if any, will happen at https://github.com/rpaulo/wii.
Discussed with: nathanw (a long time ago), jhibbits
root with BSD.root.mtree, so it often times will not exist. Rather
than force the latter for an installkernel, just create the directory
with a comment about why.
Submitted by: Guy Yur
I discovered this while working on llvm/lld and realized export-dynamic
only supported --. Although upstream will eventually grow to support
both - and --, switch this in our build system, because GNU ld supports
both modes, and because there's some hope lld will become the default linker
for FreeBSD in the future.
Discussed with: emaste, rdivacky
in kernel config files..
put VERBOSE_SYSINIT in it's own option header so the one file,
init_main.c, can use it instead of requiring an entire kernel recompile
to change one file..
The C standard undefines behavior when signed integers overflow. The
compiler toolchain has become more adept at detecting this and taking
advantage of faster undefined behavior. At the current time this has the
unfortunate effect of the clock stopping after 24 days of uptime.
clang makes no distinction between -fwrapv and -fno-strict-overflow. gcc
does treat them differently but -fwrapv is mature in gcc and is the
behavior are actually expecting.
Obtained from: kib
KVM clock shares the same data structures between the guest and the host
as Xen so it makes sense to just have a single copy of this code.
Differential Revision: https://reviews.freebsd.org/D1429
Reviewed by: royger (eariler version)
MFC after: 1 month
allocations if only one element should be allocated per page
cache. Make one allocation per element compile time configurable. Fix
a comment while at it.
Suggested by: ian @
MFC after: 1 week
it processes its own ELF relocations and can be loaded and run in place at
any physical/virtual address.
NB: This requires an updated loader to boot!
Relnotes: yes
__attribute__((format(...))), and the -fformat-extensions flag was
removed, introduce a new macro in bsd.sys.mk to choose the right variant
of compile flag for the used compiler, and use it.
Also add something similar to kern.mk, since including bsd.sys.mk from
that file will anger Warner. :-)
Note that bsd.sys.mk does not support the MK_FORMAT_EXTENSIONS knob used
in kern.mk, since that knob is only available in kern.opts.mk, not in
src.opts.mk. We might want to add it later, to more easily support
external compilers for building world (in particular, sys/boot).
bits.
The motivation here is to eventually teach netisr and potentially
other networking subsystems a bit more about how RSS work queues / buckets
are configured so things have a hope of auto-configuring in the future.
* net/rss_config.[ch] takes care of the generic bits for doing
configuration, hash function selection, etc;
* topelitz.[ch] is now in net/ rather than netinet/;
* (and would be in libkern if it didn't directly include RSS_KEYSIZE;
that's a later thing to fix up.)
* netinet/in_rss.[ch] now just contains the IPv4 specific methods;
* and netinet/in6_rss.[ch] now just contains the IPv6 specific methods.
This should have no functional impact on anyone currently using
the RSS support.
Differential Revision: D1383
Reviewed by: gnn, jfv (intel driver bits)
