Interrupt based driver, implements SPI mode and clock configuration.
Tested on espressobin and SG-3200.
Sponsored by: Rubicon Communications, LLC (Netgate)
This controller is a bit tricky as the STOP condition must be indicated in
the last tranferred byte, some devices will not like the repeated start
behavior of this controller. A proper fix to this issue is in the works.
This driver works in polling mode, can be used early in the boot (required
in some cases).
Tested on espressobin/SG-1100 and the SG-3200.
Obtained from: pfSense
Sponsored by: Rubicon Communications, LLC (Netgate)
After discussing with mmel@, it was clear this is insufficient to address
all the needs. mmel@ will commit his original patch, from
https://reviews.freebsd.org/D13861, and the additions needed from r354714
will be made afterward.
Requested by: mmel
Sponsored by: Juniper Networks, Inc.
Update the NetBSD Kernel Concurrency Sanitizer (KCSAN) runtime to work in
the FreeBSD kernel. It is a useful tool for finding data races between
threads executing on different CPUs.
This can be enabled by enabling KCSAN in the kernel config, or by using the
GENERIC-KCSAN amd64 kernel. It works on amd64 and arm64, however the later
needs a compiler change to allow -fsanitize=thread that KCSAN uses.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22315
Summary:
Boot arm64 kernel using booti command from U-boot. booti can relocate initrd
image into higher ram addresses, therefore align the initrd load address to 1GiB
and create VA = PA map for it. Create L2 pagetable entries to copy the initrd
image into KVA.
(parts of the code in https://reviews.freebsd.org/D13861 was referred and used
as appropriate)
Submitted by: Siddharth Tuli <siddharthtuli_gmail.com>
Reviewed by: manu
Sponsored by: Juniper Networks, Inc
Differential Revision: https://reviews.freebsd.org/D22255
This is a driver for the USB3 PHY present in the RK3399.
While the phy support DP (Display Port) the driver doesn't has we have
no driver to test this with for now.
All the lane and pll configuration is just magic values from rockchip.
While the manual have some info on those registers it's really hard to
understand how to calculate those values (if there is a way).
MFC after: 1 month
As with amd64 NUMA is required for reasonable operation on big-iron
arm64 systems and is expected to have no significant impact on small
systems. Enable it now for wider testing in advance of FreeBSD 13.0.
You can use the 'vm.ndomains' sysctl to see if multiple domains are in
use - for example (from Cavium/Marvell ThunderX2):
# sysctl vm.ndomains
vm.ndomains: 2
No objection: manu
Sponsored by: The FreeBSD Foundation
in simple multifunction driver.
- follow interrupt changes in DT. Split old ICU driver to function oriented
parts and add drivers for newly defined parts (system error interrupts).
- Many drivers are children of simple multifunction driver. But after r349596
simple MF driver doesn't longer exports memory resources, and all children
must use syscon interface to access their registers. Adapt affected
drivers to this fact.
MFC after: 3 weeks
Debugnet is a simplistic and specialized panic- or debug-time reliable
datagram transport. It can drive a single connection at a time and is
currently unidirectional (debug/panic machine transmit to remote server
only).
It is mostly a verbatim code lift from netdump(4). Netdump(4) remains
the only consumer (until the rest of this patch series lands).
The INET-specific logic has been extracted somewhat more thoroughly than
previously in netdump(4), into debugnet_inet.c. UDP-layer logic and up, as
much as possible as is protocol-independent, remains in debugnet.c. The
separation is not perfect and future improvement is welcome. Supporting
INET6 is a long-term goal.
Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to
'debugnet_' or 'dn_' -- sorry. I thought keeping the netdump name on the
generic module would be more confusing than the refactoring.
The only functional change here is the mbuf allocation / tracking. Instead
of initiating solely on netdump-configured interface(s) at dumpon(8)
configuration time, we watch for any debugnet-enabled NIC for link
activation and query it for mbuf parameters at that time. If they exceed
the existing high-water mark allocation, we re-allocate and track the new
high-water mark. Otherwise, we leave the pre-panic mbuf allocation alone.
In a future patch in this series, this will allow initiating netdump from
panic ddb(4) without pre-panic configuration.
No other functional change intended.
Reviewed by: markj (earlier version)
Some discussion with: emaste, jhb
Objection from: marius
Differential Revision: https://reviews.freebsd.org/D21421
This adds support for H6 SoC.
Add a CCU driver for H6 that support all PLLs and most of the clocks
that we are intersted in for now (i2c, mmc, usb, etc ...)
MFC after: 1 month
This driver is for the usb phy present on rockchip SoC.
It only support RK3399 and host mode for now.
The driver expose the usb clock needed by the usb controller.
Intel Stratix 10 SoC includes a quad-core arm64 cluster and FPGA fabric.
This adds support for reconfiguring FPGA.
Accessing FPGA core of this SoC require the level of privilege EL3,
while kernel runs in EL1 (lower) level of privilege.
This provides an Intel service layer interface that uses SMCCC to pass
queries to the secure-monitor (EL3).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21454
Terasic DE10-Pro (an Intel Stratix 10 GX/SX FPGA Development Kit).
The Altera EMAC is an instance of Synopsys DesignWare Gigabit MAC.
This driver sets correct clock range for MDIO interface on Intel Stratix 10
platform.
This is required due to lack of support for clock manager device for
this platform that could tell us the clock frequency value for ethernet
clock domain.
Sponsored by: DARPA, AFRL
The A3700 has a different GPIO controller and thus, do not use the old (and
shared) code for Marvell.
The pinctrl driver, also part of the controller, is not supported yet (but
the implementation should be straightforward).
Sponsored by: Rubicon Communications, LLC (Netgate)
Having IPSEC compiled into the kernel imposes a non-trivial
performance penalty on multi-threaded workloads due to IPSEC
refcounting. In my benchmarks of multi-threaded UDP
transmit (connected sockets), I've seen a roughly 20% performance
penalty when the IPSEC option is included in the kernel (16.8Mpps
vs 13.8Mpps with 32 senders on a 14 core / 28 HTT Xeon
2697v3)). This is largely due to key_addref() incrementing and
decrementing an atomic reference count on the default
policy. This cause all CPUs to stall on the same cacheline, as it
bounces between different CPUs.
Given that relatively few users use ipsec, and that it can be
loaded as a module, it seems reasonable to ask those users to
load the ipsec module so as to avoid imposing this penalty on the
GENERIC kernel. Its my hope that this will make FreeBSD look
better in "out of the box" benchmark comparisons with other
operating systems.
Many thanks to ae for fixing auto-loading of ipsec.ko when
ifconfig tries to configure ipsec, and to cy for volunteering
to ensure the the racoon ports will load the ipsec.ko module
Reviewed by: cem, cy, delphij, gnn, jhb, jpaetzel
Differential Revision: https://reviews.freebsd.org/D20163
Ampere eMAG systems have XHCI just described in ACPI, not on PCI.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: andrew
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19986
tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).
This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp
[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).
ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.
(MFC commentary)
This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.
I have no plans to do this MFC as of now.
Reviewed by: bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from: melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20044
Use it wherever COMPAT_FREEBSD11 is currently specified, like r309749.
Reviewed by: imp, jhb, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20120
After latest binding update, this patch enables usage of
the switch on Armada 3720 EspressoBin, so compile it
by default with arm64 GENERIC.
A patch was extracted from https://reviews.freebsd.org/D19036
Submitted by: Bert JW Regeer <xistence@0x58.com>
Reviewed by: manu
Marvell XHCI is in fact generic-xhci, so move the driver and
add the compatible string.
While here, get and enable the phy if the dtb provide one.
The xhci bindings state that phys should be in a 'phys' property but
Marvell DTS uses 'usb-phy', only add support for 'usb-phy' for now.
Sponsored-by: Rubicon Communications, LCC ("Netgate")
Make every rockchip file depend on the multiple soc_rockchip options
While here make rk_i2c and rk_gpio depend on their device options.
Reported by: sbruno
The COVERAGE option breaks xtoolchain-gcc GENERIC kernel early boot
extremely badly and hasn't been fixed for the ~week since it was committed.
Please enable for GENERIC only when it doesn't do that.
Related fallout reported by: lwhsu, tuexen (pr 235611)
This allows userspace to trace the kernel using the coverage sanitizer
found in clang. It will also allow other coverage tools to be built as
modules and attach into the same framework.
Sponsored by: DARPA, AFRL
iflib is already a module, but it is unconditionally compiled into the
kernel. There are drivers which do not need iflib(4), and there are
situations where somebody might not want iflib in kernel because of
using the corresponding driver as module.
Reviewed by: marius
Discussed with: erj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19041
This will allow multiple consumers of the coverage data to be compiled
into the kernel together. The only requirement is only one can be
registered at a given point in time, however it is expected they will
only register when the coverage data is needed.
A new kernel conflig option COVERAGE is added. This will allow kcov to
become a module that can be loaded as needed, or compiled into the
kernel.
While here clean up the #include style a little.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18955
- Remove CS=2 entry from spigen-rpi2 since it didn't work
- Add spigen-rpi3 overlay for Raspberry Pi 3
- Enable rpi overlay modules for GENERIC kernel on aarch64
PR: 233489
Submitted by: bobf@mrp3.com
Reviewed by: db
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16088
When building with KCOV enabled the compiler will insert function calls
to probes allowing us to trace the execution of the kernel from userspace.
These probes are on function entry (trace-pc) and on comparison operations
(trace-cmp).
Userspace can enable the use of these probes on a single kernel thread with
an ioctl interface. It can allocate space for the probe with KIOSETBUFSIZE,
then mmap the allocated buffer and enable tracing with KIOENABLE, with the
trace mode being passed in as the int argument. When complete KIODISABLE
is used to disable tracing.
The first item in the buffer is the number of trace event that have
happened. Userspace can write 0 to this to reset the tracing, and is
expected to do so on first use.
The format of the buffer depends on the trace mode. When in PC tracing just
the return address of the probe is stored. Under comparison tracing the
comparison type, the two arguments, and the return address are traced. The
former method uses on entry per trace event, while the later uses 4. As
such they are incompatible so only a single mode may be enabled.
KCOV is expected to help fuzzing the kernel, and while in development has
already found a number of issues. It is required for the syzkaller system
call fuzzer [1]. Other kernel fuzzers could also make use of it, either
with the current interface, or by extending it with new modes.
A man page is currently being worked on and is expected to be committed
soon, however having the code in the kernel now is useful for other
developers to use.
[1] https://github.com/google/syzkaller
Submitted by: Mitchell Horne <mhorne063@gmail.com> (Earlier version)
Reviewed by: kib
Testing by: tuexen
Sponsored by: DARPA, AFRL
Sponsored by: The FreeBSD Foundation (Mitchell Horne)
Differential Revision: https://reviews.freebsd.org/D14599
icu is a interrupt concentrator in the CP110 block and gicp
is a gic extension to allow interrupts in the CP block to be turned
into GIC SPI interrupts
Sponsored by: Rubicon Communications, LLC ("Netgate")
