It's usefull for development (for netboot) and it also helps to boot
FreeBSD on some embeded platforms (where we must boot kernel directly,
without standard boot loader).
MFC after: 3 weeks
This should fix the lib32 build since it was not removing the generated
ioctl.c. This file is generated by a find(1) call, so cannot use normal
dependency tracking methods.
Reported by: jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
This allows 'make foo install' or 'make all install'. It is a similar
fix as r304697 did for reading dependency files.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
_SKIP_BUILD will be set when nothing is expected to be built. This can
be used to optimize some tree-walks and operations which don't need to
load dependency files or generate dependencies via beforebuild-style
hacks.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
This was a mistake in r295641, but is effectively prevented from
being a problem due to r296699 preventing 'make all' from being
usable at MAKELEVEL 0 for DIRDEPS_BUILD.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Linux has a slightly different device tree definition for DPAA than originally
done in the FreeBSD driver. This changes the driver to be mostly compatible
with the Linux device tree definitions. Currently the differences are:
bman-portals: compatible = "fsl,bman-portals" (Linux is "simple-bus")
qman-portals: compatible = "fsl,qman-portals" (Linux is "simple-bus")
fman: compatible = "fsl,fman" (Linux is "simple-bus")
The Linux device tree doesn't specify anything for rgmii in the mdio. This
change still requires the device tree to specify the phy-handle, and doesn't yet
support tbi.
These are FreeBSD-specific and were added in r178576 to provide the ability
to pretty-print instances of compound types. However, the print action has
long since been augmented to provide this functionality with a simpler
interface.
Discussed with: gnn
Differential Revision: https://reviews.freebsd.org/D8478
Calling into an ifnet implementation with the if_addr_lock already
held can cause a LOR and potentially a deadlock, as ifnet
implementations typically can take the if_addr_lock after their
own locks during configuration. Refactor a sysctl handler that
was violating this to read if_counter data in a temporary buffer
before the if_addr_lock is taken, and then copying the data
in its final location later, when the if_addr_lock is held.
PR: 194109
Reported by: Jean-Sebastien Pedron
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8498
Reviewed by: sbruno
before calling ieee80211_ifattach() so the taskqueue hasn't been
initialized. Don't try to drain it, we'll panic.
Looks like this issue was introduced in r303326.
Reviewed by: avos, sbruno, adrian
Differential Revision: https://reviews.freebsd.org/D8499
- Increase Rx buffer size from MCLBYTES to MJUMPAGESIZE.
- Provide an additional defragmentation routine for frames larger
than MCLBYTES; that is required by A-MSDU / Atheros Fast-Frames
support to work with current Tx path implementation.
Enabled features list for RTL8188CE:
- Atheros Fast-Frames;
- A-MPDU (Tx / Rx);
- A-MSDU (Tx / Rx; 4k only);
- Short Guard Interval.
Tested with:
- RTL8188CE (STA+AP) + RTL8821AU (STA).
- RTL8188CE (STA) + RTL8188CUS (AP).
Relnotes: yes
under first_page cannot be taken as this variable is connected only to
vm_page_array segment. There could be more segments in system like
the ones for various fictitious page ranges. These can be situated
under vm_page_array segment and so, they could be skipped before this
fix. However, as far as I know, there is no report associated with it.
While here, the return type of this function is changed from boolean_t
to bool type.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8502
- Attach only to WMI devices that provide supported GUIDs. HP Spectre x360
has two WMI devices, only one of which provides the GUIDs.
- Pass proper device to ACPI_WMI_REMOVE_EVENT_HANDLER() on detach.
- Improve error WMI handling separating status and data paths. This allows
to hide sysctls not supported by specific hardware/BIOS.
- Improve CMI block parser to make it work on HP Spectre x360 laptop.
- In verbose mode log all unknown events to help futher improvements.
- Send IPI wakeups once SMP is started even if cold is true.
- Permit preemptions when cold is true.
These changes are needed for EARLY_AP_STARTUP.
MFC after: 2 weeks
Sponsored by: Netflix
The other CPU might resume and see a still-empty runq and go back to
sleep before sched_add() adds the thread to the runq. This results
in a lost wakeup and a potential hang if the system is otherwise
completely idle.
The race originated due to a micro-optimization (my fault) in 4BSD in
that it avoided putting a thread on the run queue if the scheduler was
going to preempt to the new thread. To avoid complexity while fixing
this race, just drop this optimization. 4BSD now always sets the
"owepreempt" flag when a preemption is warranted and defers the actual
preemption to the thread_unlock of the caller the same as ULE.
MFC after: 2 weeks
Sponsored by: Netflix
As in the gnu/lib/libgcc Makefile:
libgcc is linked in last and thus cannot depend on ssp
symbols coming from earlier libraries. Disable stack protection
for this library.
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
In a git worktree, the gitdir is in an entirely different location.
In arcgit, use git rev-parse --git-dir to get the correct path to it
always.
When running git from outside of the work tree, as in importgit,
the path provided by git rev-parse --git-dir can be either a
relative or absolute path depending on the work tree. Rather
than trying to deal with that, just use git -C.
Differential Revision: https://reviews.freebsd.org/D8501
Reviewed by: markj
AArch64: only try to use scaled fcvt ops on legal vector types.
Before we ended up calling getSimpleVectorType on a <3 x float>, which
asserted.
This fixes an assertion when building the print/ghostscript9-agpl-base
port for AArch64.
PR: 213865
MFC after: 3 days
In the case where a hardware error is detected during
ioat_process_events, hardware may advance (by one descriptor, probably)
and a subsequent ioat_process_events may race the intended ioat_reset_hw
followup. In that case, the second process_events would observe a
completion update that does not match the software "last_seen" status,
and attempt to successfully complete already-failed descriptors.
Guard against this race with the resetting_cleanup flag.
Reviewed by: bdrewery, markj
Sponsored by: Dell EMC Isilon
Newer CPUs (SkyLakes) have updates of 100K size, which is bigger than
current limit 32K. Increase it to 4M but leave the check around to
prevent kernel memory allocator abuse. Some time ago, the memory for
update was allocated by contigmalloc(9), and it was reasonable to be
conservative as much as possible. Since all uses of contigmalloc(9)
appear to be either misunderstanding or too cautious, and were
removed, provide more slack than strictly neccessary.
Submitted by: Oliver Pinter
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D8486
/loader.rc) to specify a Forth file to read from the pkgfs tarball and
process by Ficl.
This allows for the tarball to do runtime things like load a
platform-specific FDT blob, among other things.
Reviewed by: imp
Approved by: sjg (mentor)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8494
After removal of SMB_TRANS some information in the description of
SMB_BWRITE has become stale. E.g., the maximum block size has been
restored to 32.
Also, the descriptions of SMB_BREAD and SMB_BWRITE had some
incorrect information on the SMBus protocol details.
MFC after: 1 week
X-MFC with: r308242
Differential Revision: https://reviews.freebsd.org/D8431
The constant was set to the correct value in r308242.
While there, fix iicsmb_bread() to not use a value of an out parameter
'count'.
MFC after: 3 weeks
X-MFC after: r308242
