Remove all cross references to zfsloader.8 and /boot/zfsloader.
Move ZFS specific info into loader.8.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16361
We no longer really need a separate zfsloader. It was useful when we
were first supporting ZFS and had limited ability to properly boot off
of ZFS without the special boot loader. Now that the boot loader has
matured, go the way loader.efi pioneered and just build one
binary. Change the name of the loader to load in the secondary boot
blocks to be just /boot/loader. Provide a symbolic link from zfsloader
to loader so people who have not upgraded their boot blocks are not
affected. This has the happy benefit of making coexistence easier as
well (fewer binaries in the matrix).
Discussed with: allanjude@, kevans@
RelNotes: Yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16361
Setting rootdev in the enviornment should specify things
completely. If it is set, then have it override everything else.
PR: 229770
Differential Review: https://reviews.freebsd.org/D16322
up serial output. Setting the cursor position after every character is
inefficient, and causes all lines to be over-printed in the serial
console for the boot loader. Allow the terminal to do the emulation.
This isn't completely perfect when the size of the terminal attached
to the serial port isn't the same as 80x25 to match the viedoe console
(or whatever the video console is). While imperfect still, these
changes make it much better.
This makes the serial port useful with UEFI.
Differential Revision: https://reviews.freebsd.org/D16309
o Fix the parsing of the device path. a last minute change terminated
it too soon.
o Kill setting LINES. We don't need to do it, and even if we did hard
coding it to 24 is wrong.
o Now that the console is working again for the loader, adjust the
printfs to be more in line with other platforms.
note that r336270's commit message was slightly incorrect. It changed
the default setting of the console to honor the ConOut
variable. Overrides via the command line are still possible, and we
use the devices in ConOut to set the proper console. If, for example,
serial cosnole is specified, we'll set console to "efi" if ConOut has
a serial port list and to either "efi comconsole" or "comconsole efi"
if not depending on whether -D or -D -h was specified.
RelNotes: Yes
Sponsored by: Netflix
For server machines, ComOut is set to the set of devices that the efi
console suppots. Parse it to see if we have serial, video or both.
Make that take precidence over the command line args. boot1.efi parses
them, but loader.efi doesn't. It's not clear where to read boot.conf
from, so we don't do that. The command line args can still be set via
efibootmgr, which is more inline with the UEFI boot manager to replace
that. These args are typically used only to set serial vs video and
the com speed line. We can infer that from ComOut, so do so.
Remember the com speed and hw.uart.console to match.
RelNotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15917
This moves the bulk of the geli support from lib386/biosdisk.c into a new
geli/gelidev.c which implements a devsw-type device whose dv_strategy()
function handles geli decryption. Support for all arches comes from moving
the taste-and-attach code to the devopen() function in libsa.
After opening any DEVT_DISK device, devopen() calls the new function
geli_probe_and_attach(), which will "attach" the geli code to the open_file
struct by creating a geli_devdesc instance to replace the disk_devdesc
instance in the open_file. That routes all IO for the device through the
geli code.
A new public geli_add_key() function is added, to allow arch/vendor-specific
code to add keys obtained from custom hardware or other sources.
With these changes, geli support will be compiled into all variations of
loader(8) on all arches because the default is WITH_LOADER_GELI.
Relnotes: yes
Sponsored by: Microchip Technology Inc
Differential Revision: https://reviews.freebsd.org/D15743
to it being a common name elsewhere. Rename the old kzip one
to subr_inflate.c.
This actually fixes the build issues on sparc64 that my inclusion of
.PATH ${SYSDIR}/kern created in r336244, so also revert the broken
workaround I committed in r336249.
This slipped passed me because apparently, I never did a clean build.
Eliminate 4 of the copies of the arg parsing in /boot/laoder
by using boot_parse_cmdline.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16205
boot_parse_arg to parse a single arg
boot_parse_cmdline to parse a command line string
boot_parse_args to parse all the args in a vector
boot_howto_to_env Convert howto bits to env vars
boot_env_to_howto Return howto mask mased on what's set in the environment.
All these routines return an int that's the bitmask of the args
translated to RB_* flags. As a special case, the 'S' flag sets the
comconsole_speed env var. Any arg that looks like a=b will set the env
key 'a' to value 'b'. If =b is omitted, 'a' is set to '1'. This
should help us reduce the number of redundant copies of these routines
in the tree. It should also give a more uniform experience between
platforms.
Also, invent a new flag RB_PROBE that's set when 'P' is parsed. On
x86 + BIOS, this means 'probe for the keyboard, and if it's not there
set both RB_MULTIPLE and RB_SERIAL (which means show the output on
both video and serial consoles, but make serial primary). Others it
may be some similar concept of probing, but it's loader dependent
what, exactly, it means.
These routines are suitable for /boot/loader and/or the kernel,
though they may not be suitable for the tightly hand-rolled-for-space
environments like boot2.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16205
While ../zfs/libzfs.h mostly works, there are a few situations where
it does not. Eliminate the problem by using plain libzfs.h, like we do
for ufs support. This fixes the weird cases, and is easier to
understand. It also follows the general style convetion of avoiding
../ in #includes.
Move the libzfs stuff into libsa. There's no need for it to be a
separate library. The separate library adds to the issues of build
ordering that we see from time to time. Move the filesystem support
into libsa, like all the other filesystem support rather than making
zfs the odd-duck out.
Discussed with: allanjude@
U-Boot setup a few variables :
- fdt_addr which is the board static dtb (most of the time loaded before
u-boot or coming from some hardware like a ROM)
- fdt_addr_r which is a location in RAM that holds the DTB loaded by
u-boot or before u-boot
In the case of u-boot + rpi firmware the DTB is loaded in RAM but the location
still end up in the fdt_addr variable and the fdt_addr_r variable exist.
Change the behavior so we test that a DTB exists for every possible variable :
- fdt_addr_r is checked first as if u-boot needed to modify it the
correct DTB will live there.
- fdt_addr is checked second as if we run on a hardware with DTB in ROM
it means that we what/need to run that
- fdtaddr looks like a FreeBSD-ism but since I'm not sure leave it.
Reviewed by: gonzo
Differential Revision: https://reviews.freebsd.org/D16101
Previously the code cut those fields on second colon, that prevented
boot from boot environments with colon in their names. This change
moves the limitation from dev field to path, which is empty by default.
Reviewed by: allanjude, tsoome
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D16068
If a disk is of an oddball size, like the 200mb + 512b used in rootgen.sh,
when disk_open() is called on a GELI encrypted partition, attempts to read
the partition table fail, as they pass through the decryption process which
turns the already plaintext data into jibberish.
When reading the partition table, always pass a slice and partition setting
of -1, and an offset of 0. Setting the slice to -1 prevents a false
positive when checking the slice against the cache of GELI encrypted
slices.
Reviewed by: imp, ian
Sponsored by: Klara Systems
Differential Revision: https://reviews.freebsd.org/D15847
While in base we use it as a boolean (of the wrong spelling), there's
at least one out of tree user that needs it to be int since priorirty
is a small int, not a 0/1. In deference to the time it's wasted me and
my team, push this up into FreeBSD for whatever short life boot1 may
have in the tree.
SVN r280384 updated the maximum password length from 16 bytes to 255. The
manual was not updated to reflect this. Found while working on kern/207069.
MFC after: 3 days
X-MFC-to: stable/11 stable/10
Sponsored by: Smule, Inc.
This was causing issues for people booting.
I will likely bring this back as an optional feature, similar to
boot0sio, like gptboot-serial or something.
PR: 221526
Reported by: O. Hartmann <ohartmann@walstatt.org>, Thomas Laus <lausts@acm.org>
Reduce by 1 the number of crazy libraries we need in stand by moving
geli into libsa (where architecturally it belonged all along). This
just moves things around without any code changes.
Normally the serial console is not enabled until /boot.config is read and
we know how the serial console should be configured. Initialize the
consoles early in 'dual' mode (serial & keyboard) with a default serial
rate of 115200. Then serial is re-initialized once the disk is decrypted
and the /boot.config file can be read.
This allows the GELIBoot passphrase to be provided via the serial console.
PR: 221526
Requested by: many
Reviewed by: imp
Sponsored by: Klara Systems
Differential Revision: https://reviews.freebsd.org/D15862
The GELI boot code rounds reads up to 4k, since the encrypted sectors are
4k, and must be decrypted as a unit. With oddball sized disks (almost
always virtual), this can lead to reading past the end of the disk.
Reviewed by: imp, tsoome
Sponsored by: Klara Systems
Differential Revision: https://reviews.freebsd.org/D15844
`rdev` and `disk` serve the same purpose, read the partition table without
the `d_offset` or `d_slice` set, so the read is relative to the start of
the disk. Reuse the already initialized `disk` instead of making another
copy later.
Sponsored by: Klara Systems
The wrong condition is used when evaluating the return of disk_ioctl()
This results in reaching the 'We should not get here' branch in most casts
Reviewed by: imp
Sponsored by: Klara Systems
Differential Revision: https://reviews.freebsd.org/D15839
table if we're just going to ignore it on arm, so expand, slightly,
the reach of the ifdef. Move the buffer to the inner block so we
don't have a separate #ifdef far away from these lines.
The issue on arm is that smbios_detect does unaligned accesses, which
in the u-boot implementing EFI context causes a crash.
is. We tell the ZFS code now, and it checks rather than having a
callback to do the checks.
This will allow us to have a more graceful fallback code. In the
future, it's anticipated that we may fallback to a more global search
(or implement a command to do so) when reqeusted by the user, or we
detect a violation of the UEFI Boot Manager protocol severe enough to
warrant this backstop. For now, it just allows us to get rid of img as
a global.
Sponsored by: Netflix
To recap the problem: with a black-on-white xterm, the menu draws terribly.
Ideally, we would try our best for a white-on-black context for the menu
since graphics and whatnot might not be tested for other setups and there's
no reasonable way to sample the terminal at this point for the used color
scheme.
This commit attempts to address that further in two ways:
- Instead of issuing CSI bg/fg resets (CSI 39m and CSI 49m respectively for
"default"), issue CSI bg/fg escape sequences for our expected color scheme
- Reset to *our* default color scheme before we even attempt to load the
local module, so that we personally don't have any earlier text with the
console default color scheme.
Reported by: emaste (again)
dteske@, I believe, had originally pointed out that lualoader failed to
allow logo-*.lua for new logos to be added. When correcting this mistake, I
failed to do the same for brands.
Correct the sub-mistake: creating new brands is almost identical to creating
new logos, except one must use `drawer.addBrand` and 'graphic' is the only
valid key for a branddef at the moment.
While here, I've added `drawer.default_brand` to be set to name of brand to
be used (e.g. 'fbsd', project default).
Eventually this whole goolash will be documented.
Reported by: kmoore, iXsystems
We support both of the following cases of substitution:
bar="y"
foo="${bar}"
foo="$bar"
The latter substitution syntax is, of course, not recommended- all
punctuation must be considered potential variable names, and we do not go
through the effort of searching the different combinations of, for instance,
"$x.y.z" to determine if the variable is $x, $x.y, or $x.y.z.
This is not officially documented as supported, but it has worked in
forthloader for what is most likely a long time as `evaluate` is used to
process the right hand side of the assignment.
loader.conf(5) documents loader_conf_files to mean "additional configuration
files to be processed right after the present file." However, lualoader
ignored loader_conf_files after processing /boot/defaults/loader.conf.
Rewrite these bits to process loader_conf_files after each loaded file.
e.g. boot_mute, boot_single, boot_verbose, and friends; we checked for these
in multiple places, consolidate into common/ and allow a setting of "NO" for
any of these to turn them off. This allows systems with multiple
loader.conf(5) or loader.conf(5) overlay systems to easily turn off
variables in later processed files by setting it to NO.
Reported by: Nick Wolff @ iXsystems
Reviewed by: imp
- jhb implemented UFS write support a little over 16 years ago.
- Update the library name while we're here.
Reviewed by: jhb, rpokala
Differential Revision: https://reviews.freebsd.org/D14476
This will not be executed on reload, though later work could allow for that.
It's intended/expected that later work won't generally need to happen on
every config load, just once (for, e.g., menu initialization) or just when
config is reloaded but not upon the initial load.
r330809 replaced duplication of devdesc struct fields with an embedded copy
of the devdesc struct, to avoid fragility. That means all the scattered
comments indicating that structs must match are no longer valid. Likewise
asserts that attempted to mitigate some of the old fragility.
Reviewed by: imp@
This makes them compatible with the C standard signatures, avoiding
spurious mismatch errors in the places where the oddball requirements
of standalone code end up putting two declarations of the same function
in play.
* Make autoboot() a static function in stand/common/boot.c, so it does
not shadow local variables in gptboot.c and zfsboot.c.
* Remove -Winline from the Makefiles for gptboot, gptzfsboot and
zfsboot, as gcc will always fail to inline some functions, and there
is nothing we can do about it.
* For gcc <= 4.2.1, silence -Wuninitialized for isoboot, as it produces
a false positive warning.
* Remove deprecated and unnecessary -mcpu=i386 flag from stand/defs.mk,
as there is already a -march=i386 flag further in the file.
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15628
than doing weird type-punning that happened to work because the size
was right. We copied a zfs devdesc into a disk_devdesc and then after
passing through a NULL pointer reinterpreted it as a
zfs_devdesc. Instead, pass the base devdesc around and 'upcase' when
we know the types are right.
This has the happy side effect of fixing a gcc warning about bad
type punning.
Differential Revision: https://reviews.freebsd.org/D15629
If the check for a UFS partition at offset 0 on the disk fails, check
to see if there's a BSD disklabel at block 1 (standard) or at offset
512 (install images assume 512 sector size). If found, probe for UFS
on the 'a' partition.
This fixes UEFI booting images from a BSD labeled MBR slice when the
'a' partiton isn't at offset 0. This is a stop-gap fix since we plan
on removing boot1.efi in FreeBSD 12. We can't easily do that for 11.2,
however, hence the short MFC window.
Tested by: emaste@
MFC After: 3 days
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15598
r329190; sparc64 kernels are always 64-bit but with that revision
in place, the loader was treating them as 32-bit ones.
- In order to reduce the likelihood of this kind of breakage in the
future, #ifdef out md_load() on sparc64 and make md_load_dual() -
which is currently local to metadata.c anyway - static.
- Make md_getboothowto() - also local to metadata.c - static.
- Get rid of the unused DTB pointer on sparc64.
Perhaps RB_MUTE could mute user startup (rc) output as well, but right
now it mutes only kernel console output, so make the documentation match
reality.
PR: 228193
Sponsored by: The FreeBSD Foundation
Even though we don't use it, it appears something else requires it to
be != 0 to work. This breaks tftp boot in loader.efi, so revert until
that can be sorted out.
If the 'n' flag is provided the provided key number will be used to
decrypt device. This can be used combined with dryrun to verify if the key
is set correctly. This can be also used to determine which key slot we want to
change on already attached device.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D15309
Contrary to what the message says, this is not only executed in an EFI
context- it provides functions for use in an EFI environment. I don't think
there's much reason to broadcast this fact when we haven't in the past, so
just remove it.
Reported by: emaste (a while ago), cperciva
r332090 added a LINKER_TYPE test to add the --no-rosegment flag when
linking the i386 loader components with lld. Instead, introduce a
general mechanism for setting LDFLAGS for a specific linker type,
and use it for --no-rosegment.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14998
- We should be setting a known graphics mode on conout, but we aren't.
- We shouldn't be setting gop mode if we didn't find a good resolution to
set, but we were. This made efi_max_resolution=1x1 effectively worthless,
since it would always set gop mode 0 if nothing else.
Harry Schmalzbauer reports that some firmware, in his experience, trips
over the ESP we install due to the volume label. It has been theorized that
this is due to some confusion with the label and the path on the ESP to
boot1.efi.
Regardless, Harry found that renaming the label seems to fix it.
PR: 214282
MFC after: 3 days
Since we do free subtopic and desc in help_getnext(), we need to set them also
NULL, so we make sure we dont get double free().
Approved by: bapt
Differential Revision: https://reviews.freebsd.org/D15082
With r328289 we attempt to make sure we free the resources allocated in
help_getnext(), however, it is possible that we get no resources allocated
and help_getnext() will return early.
Make sure we have pointers set to NULL early in help_getnext().
Reported by: Andy Fiddaman
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
Refactor the currdev setting to find the device we booted from. Limit
searching when we don't already have a reasonable currdev from that to
the same device only. Search a little harder for ZFS volumes as that's
needed for loader.efi to live on an ESP.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D13784
There's problems with them. The order of efi stuff isn't quite right,
and there's various problems. Revert until thos problems can be fixed.
Reviewed by: kevans@
Earlier efforts to stop loading the menu broke the ability to skip the menu
with, e.g., beastie_disable in loader.conf(5) as it was decided before
configuration was read.
Defer bringing in the menu module until we've loaded configuration so that
we can make a more informed decision on whether the menu should be skipped
or not.
btxld does not correctly handle input with other than 2 PT_LOAD
segments. Passing --no-rosegment lets lld produce output eqivalent to
ld.bfd: 2 PT_LOAD segments and no PT_GNU_RELRO.
PR: 225775
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14956
When booted via isoboot(8) loader will be handed a disk that simply contains
an ISO9660 image. Currently this confuses it greatly. Teach it how to spot
that it's in this situation and that ISO9660 has one "partition" covering
the whole disk.
Reviewed by: imp
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14915
This is part of a project for adding the ability to create hybrid CD/USB boot
images. In the BIOS case when booting from something that isn't a CD we need
some extra boot code to actually find our next stage (loader) within an
ISO9660 filesystem. This code will reside in a GPT partition (similar to
gptboot(8) from which it is derived) and looks for /boot/loader in an
ISO9660 filesystem on the image.
Reviewed by: imp
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14914
Effectively disabling the mode changing bits in the loader. No matter which
way we go with it, it seems to be wrong- either the firmware doesn't change
the resolution and reports the resolution we requested, or the firmware
changes the resolution and doesn't report the resolution we requested. It
some cases, it does the right thing, but the bad cases outweight those.
Interested individuals can still set efi_max_resolution to 1080p or whatnot
in loader.conf(5) to restore the new behavior, but the new behavior does not
work out well for many cases.
Discussed with: imp
This commit splits all of the logodefs/graphics out into their own own files
and provides a method for these files to register their logodefs with the
drawer. Graphics are now loaded on demand if they don't exist in the current
set of logodefs.
The drawer module becomes a little easier to navigate through without all of
the graphics mixed in. It's also easy to do one-off graphics like the
9.2 Die Hard tribute by dteske@ without adding even more to our memory
requirements.
- No need for a 'goto' when our entire loop body is then wrapped in a
conditional.
- No need to leave commented out prints laying around
- If an expression is clearly going to be either nil or an expression that
isn't likely to be a boolean, we might as well use `or` to specify a
default value for the expression. e.g. `loader.getenv(...) or "no"`
The previous iteration of this assumed that {module}_load was set. In the
old world order of default loader.conf(5), this was probably a safe
assumption given that we had almost every module explicitly not-loaded in
it.
In the new world order, this is no longer the case, so one could delete a
_load line inadvertently while leaving a _name, _type, _flags, _before,
_after, or _error. This would have caused a confusing Lua error and borked
module loading.
If the network interface or the uefi implementation do not support the
ReceiveFilter interface do not return only and just print a message.
U-Boot doesn't support is and likely never will. Also even if this fails
it doesn't mean that network in EFI isn't supported.
hrs@ and kuriyama@ have found that on some HP BIOS, a system will fail to
boot immediately after installation with the claim that it can't work out
which disk they are booting from.
They tracked it down to a buffer overrun, and found that it could be
alleviated by doing a dummy read before-hand.
Submitted by: kuriyama
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14341
zfsloader(8) fails to probe a slice containing ZFS pool if its second sector
contains traces of BSD label (DISKMAGIC == 0x82564557).
Fix manual page to show working example erasing such traces.
PR: 226714
Approved by: avg (mentor)
MFC after: 3 days
It was previously only printed, but we do actually want to raise it as a
full blown error so that things don't look OK when they've actually gone
wrong.
The second parameter to error, level, is set to 2 here so that the error
message reflects the position of the try_include caller, rather than the
try_include itself. Example:
LUA ERROR: /boot/lua/loader.lua:46: /boot/lua/local.lua:1: attempt to call a
nil value (global 'cxcint').
This provides a way to optionally include a module without having to wrap it
in filesystem checks. try_include is a little more robust, using the lua
search path instead of forcing us to explicitly consider all of the places
we could want to include a module. Errors are still generally raised from
trying to load the module, but ENOENT will not get raised unless we're doing
a verbose load.
This will also be used to split out logo/brand graphics into their own files
so that we can safely scale up the number of graphics included without
worrying about the extra memory consumption- opting to lazily load graphics
instead.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D14658
UGA does not have the same kind of mode enumeration that GOP does. Implement
it instead as a call to text_autoresize so that firmwares with only UGA
present still get some kind of autoresizing behavior.
While here, rename a typo'd "gop" to "uga", although it will remain unused
for the time being.
This pertains exclusively to the set/restore functionality that we offer,
where any changes made by loader.conf previously will be effectively removed
upon reload of the configuration. We don't currently have a need to export
these, so don't bother.
Not all systems use efifb; pull hw.vga.textmode and choose a good console
mode instead if it's set to something non-zero. This is basically a revival
of the code that used to live in boot1, but instead rebased onto this
different way of doing mode selection in loader.efi.
Interestingly enough, the regression that was previously introduced where
GOP would not reflect the console setting does not seem to exist when
console mode selection is done here. I've not done any investigation as to
why this is the case. Nevertheless, boot1.efi is still not the best place to
do mode selection.
Default the max resolution to 1080p, we'll accept Width x Height
specifications along with the following presets:
- 480p
- 720p
- 1080p
- 2160p or 4k
- 5k
PR: 224825
Differential Revision: https://reviews.freebsd.org/D14801
I thought I tested this scenario, but clearly I failed to. =(
BIOS boots won't have efi-autoresizecons, so trying to use it as a forth
word fails during include. Use evaluate on "efi-autoresizecons" as a string
instead to move any potential errors to runtime- safely after we've already
checked that we're booting UEFI.
Pointy hat to: me
Reported by: cy
r331321 delegated autoresizing to an efi-autoresizecons command that
currently is expected to be done in forth/lua prior to drawing anything
useful.
Add the Forth version of the lua addition in r331321, hook efi.4th up to be
installed.
efiboot? was written by dteske@; anything outside of that may be blamed on
me.
boot1 is too early to be deciding a good resolution. Console modes don't map
cleanly/predictably to actual screen resolutions, and GOP does not reflect
the actual screen resolution after a console mode change. Rip it out.
Add an efi-autoresizecons command to loader to choose an optimal screen
resolution based on the current environment. We'll explicitly execute this
later, preferably before we draw anything of value but after we load config
and pick up any tunables we may need to decide where we're going.
This method also allows us to actually pass the correct framebuffer
information on to the kernel.
UGA autoresizing is not implemented because it doesn't have the kind of mode
enumeration that GOP does. If an interested person with relevant hardware
could get in contact, we can take a look at implementing UGA autoresize.
This effectively "fixes" the breakage caused by r327058, but doesn't
actually set the resolution correctly until the interpreter calls
efi-autoresizcons. The lualoader version of this has been included for
reference; the forth equivalent will follow.
Reviewed by: imp (with some hestitation), manu
Differential Revision: https://reviews.freebsd.org/D14788
In the original lualoader project, 'escapef' and 'escapeb' were chosen for
'escape fg' and 'escape bg'. We've carried on this naming convention, and as
our use of attributes grow the likeliness of 'escapeb'/'resetb' being
confused upon glance for 'escape bold'/'reset bold' increases.
Fix this by renaming these four functions to {escape,reset}{fg,bg} rather
than {escape,reset}{f,b} for clarity.
Reported by: dteske
See: comments in the hook module about intended usage, as well as the
introduced use for config.reloaded.
Use the newly introduced hook module to define a "config.reloaded" hook.
This is currently used to register core's clearKernelCache as a reload hook
to avoid a circular dependency and fix this functionality- it didn't
actually work out, and it isn't immediately obvious how it slipped into src.
Other hook types will be introduced into the core lualoader as useful hook
points are identified.
Previously, we sent a CSI 0m sequence to reset attributes, which also reset
the color scheme if the terminal defaults didn't match what we're expecting.
Go all-in and reset the color scheme, too, just in case.
Reported by: emaste
The former is fairly vague; these are FDT overlays to be applied to the
running system, so /boot/dtb is a sensible location to put it without
cluttering up /boot/dtb even further if desired.
The console may have been set for different colors before lualoader kicks
in; notably, a black-on-white color scheme is not necessarily what we're
expecting.
While here, make color.default() a composition of color.escape() instead of
rewriting the escape sequence to make it more obvious what it's achieving: a
white-on-black color scheme with no attributes set.
Reported by: emaste, whose eyes may rest easily
Followup to r313780. Also prefix ext2's and nandfs's versions with
EXT2_ and NANDFS_.
Reported by: kib
Reviewed by: kib, mckusick
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9623
lualoader in itself only uses another ~200K, but there seems to be no reason
not to bump it a little higher to give us some more wiggle room.
With this, I can boot using a menu-enabled lualoader, no problem and
reasonably fast. Some heap usage datapoints from the review:
forthloader, no menus, kernel loaded:
heap base at 0x1203d5b0, top at 0x1208e000, used 330320
lualoader, no menus, kernel loaded:
heap base at 0x42050028, top at 0x420ab000, used 372696
lualoader, menus, kernel loaded:
heap base at 0x42050028, top at 0x420d5000, used 544728
Since then, the no menu case for lualoader should have decreased slightly as
I've made some changes to make sure that it no longer loads any of th emenu
bits with beastie disabled.
While here, split heap size out into a HEAP_SIZE macro.
Reviewed by: ian, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14471
This fixes a problem encountered on the Lenovo Thinkpad X220/Yoga 11e where
runtime services would try to inexplicably jump to other parts of memory
where it shouldn't be when attempting to enumerate EFI vars, causing a
panic.
The virtual mapping is enabled by default and can be disabled by setting
efi_disable_vmap in loader.conf(5).
Reviewed by: kib (earlier version)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D14677
A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines. With consistency a
great soul has simply nothing to do. -- Ralph Waldo Emerson
The current system is fragile and requires very careful layout of all
*_devdesc structures. It also makes it hard to change the base
devdesc. Take a page from CAM and put the 'header' in all the derived
classes and adjust the code to match.
For OFW, move the iHandle h_handle out of a slot conflicting with
d_opendata. Due to quirks in the alignment rules, this worked.
However changing the code to use d_opendata storage now that it's a
pointer is hard, so just have a separate field for it.
All other cleanups were to make the *_devdesc structures match where
they'd taken some liberties that were none-the-less compatible enough
to work.
open_disk uses d_opendata for it's own purpse. We can't store blkio
there. Fortunately, blkio is stored elsewhere and we never actually
retrieve blkio from d_opendata. Eliminate it as a source of confusion.
Eliminate all stores of d_opendata in efi since this layer doesn't own
that field.
Make sure { on the same line as struct for all struct *devdesc. Move
some type definitions to next to the dv_type define, since that's what
sets the d_type.
This matches a convention that we use, at least in ubldr, to prefix
getc/putc with a loader-specific prefix to avoid collisions. This was
encountered while trying to build the beri loader with MK_LOADER_LUA=yes.
No objection from: brooks
Reported by: emaste
With autodetection turned on, hitting the filesystem everytime we need to
calculate choices for the kernel carousel is kind of slow. Cache once on the
first listing and reload it anytime the config is reloaded in case any of
the loader.conf(5) changes that affect this (kernel, kernels,
kernels_autodetect) have changed. This also picks up the case where we've
changed currdev and the autodetected kernels could change.
cli_execute was changed to return the status, cascade that to
cli_execute_unparsed.
This fixes a lot of false "Failed to execute" errors following r330620; no
failures actually occurred, but [module]_error would've then promptly
executed (and also "failed")
These tend to have less coverage in other places and they don't have
defaults as of yet, so mention them here:
- fdt_overlays
- kernels_autodetect (lualoader only)
This applies to:
- exec
- [module]_before
- [module]_error
- [module]_after
Before this commit, these used loader.perform to execute them as a pure,
unsalted loader command. This means that they were not able to take
advantage of any Lua-salted loader commands, like boot and autoboot, or pure
Lua loader commands (functions attached to the 'cli' module).
They now have access to the full arsenal, just shy of being able to execute
arbitrary Lua.
loader.interpret should not be used for executing loader commands from an
untrusted source (e.g. environment vars) as it will allow execution of
arbitrary Lua. Replace it with a call to the recently introduced
cli_execute_unparsed, which parses it out as a loader command and then
dispatches it as a loader command. This effectively filters out arbitrary
Lua.
This will be used for scenarios where the command to execute is coming in
via the environment (from, for example, loader.conf(5)) and is thus not
necessarily trusted.
cli_execute_unparsed will immediately be used for handling
module_{before,after,error} as well as menu_timeout_command. We still want
to offer these variables the ability to execute Lua-intercepted loader
commands, but we don't want them to be able to execute arbitrary Lua.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D14580
testmain is a userland application intended to be built with standard
headers and whatnot, which we broke.
Fix it by having the testmain build clobber cflags, reducing it to just the
set of defines/includes it needs to build.
Discussed with: imp
MFC after: 3 days
Back when I "fixed" the loading of kernel/modules to be deferred until
booting, I inadvertently broke the ability to manually load a set of kernels
and modules in case of something bad having happened. lualoader would
instead happily load whatever is specified in loader.conf(5) and go about
the boot, leading to a panic loop as you try to rediscover a way to stop the
panicky efirt module from loading and fail miserably.
Reported by: me, sadly
than a pointer to Open Firmware by default. This eliminates a number of
potentially unsafe calls to firmware from the kernel and provides better
performance.
This feature is meant to be expanded until it is on by default
unconditionally and, ideally, we can then garbage-collect the
nightmare pile of hacks required to call into Open Firmware from a live
kernel.
Reviewed by: jhibbits
loader.command(...) will return whatever the executed function returns, so
follow suit and return whatever loader.command() returned or whatever the
Lua function returns.
the powerpc/ subdirectory. These have never used by SPARC and we have
no other (and almost certainly will have no other) Open Firmware platforms.
This makes the directory structure simpler and lets us avoid some
cargo-cult MI patterns on code that is, and always was,
architecture-specific.
- All of our default positions were offset from forth
- Our menu frame size was smaller than in forth
- Logo/brand drawing had an off-by-one, drawing one column lower on the
screen than they should have been.
- While here, switch a print() to printc() as it's expected that logos may
contain color and other escpae sequences that we'll need to honor.
It may be set to "left" or "right" -- any other value will cause the title
to be centered.
I've chosen to position these things just inside the vertical borders,
rather than overlapping the corners. This is an arbitrary choice and easily
amendable if this looks terrible.
This allows lua to pass back a command string to be executed as if it were
typed at the loader prompt- loader tries to execute the string first as pure
lua, then parses it and gives lua a chance to intercept before it tries to
execute it itself.
This will be used to implement menu_timeout_command, among other things,
which *should* be used to execute basic loader commands independent of the
chosen interpreter.
Rather than before the menu is drawn. The drawer is going to reset the
crusor position as soon as it draws anything anyways, so doing it before
serves no purpose. Setting it after is needed so we don't clobber the menu
when we start booting.
printc does not need the features or the overhead of printf. It does not
take formatting strings, and it pipes the single string argument through an
"%s" format.
Instead, use putc directly. This pipes the string through in its entirety as
a series of 'unsigned char's, generally straight to the console emulator.
Discussed with: tsoome
r330282 registered loader.printc as printc, so use it instead. This makes
sense for a couple reasons, the major point being that it reads a little bit
easier and pairs nicely with the global 'print'.
Similar cases can not really be made for other loader.* functions as most of
them are either highly specific to our use-case or usually available in
other modules, such as `os`. printc does not have a standard implementation
in the Lua world(*), so we have a little more leeway with it, and it's kind
of a special case of the globally available 'print'.
(*) I've been in the Lua world for all of two weeks, so this could be wrong.
- Add drawer.frame_styles to map out the kinds of characters we need for the
different loader_menu_frame values
- Respect loader_menu_frame, default to double[*]
- (imp) Use loader.printc instead of print- print adds a newline to the
output, which is not the right thing we want to be doing.
- (imp) Draw horizontal frames a little more efficiently- setting the cursor
after every line segment is horribly inefficient, especially on serial
consoles. Halve the number of characters written at the expense of an
additional loop to draw the bottom frame, which is likely more efficient
in the long run for some of less ideal scenarios.
[*] menu.4th(8) claims that the default here was single, but unset
loader_menu_frame yielded double and we didn't have any overrides in the
default loader.conf(5), so double it is.
Distribution will be done after all of the lualoader manpages are created.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D14480
Distribution will be done after all of the lualoader manpages are created.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D14479
to fix the memory leak that I introduced in r328426. Instead of
trying to clear up the possible memory leak in all the clients, I
ensure that it gets cleaned up in the source (e.g., ffs_sbget ensures
that memory is always freed if it returns an error).
The original change in r328426 was a bit sparse in its description.
So I am expanding on its description here (thanks cem@ and rgrimes@
for your encouragement for my longer commit messages).
In preparation for adding check hashing to superblocks, r328426 is
a refactoring of the code to get the reading/writing of the superblock
into one place. Unlike the cylinder group reading/writing which
ends up in two places (ffs_getcg/ffs_geom_strategy in the kernel
and cgget/cgput in libufs), I have the core superblock functions
just in the kernel (ffs_sbfetch/ffs_sbput in ffs_subr.c which is
already imported into utilities like fsck_ffs as well as libufs to
implement sbget/sbput). The ffs_sbfetch and ffs_sbput functions
take a function pointer to do the actual I/O for which there are
four variants:
ffs_use_bread / ffs_use_bwrite for the in-kernel filesystem
g_use_g_read_data / g_use_g_write_data for kernel geom clients
ufs_use_sa_read for the standalone code (stand/libsa/ufs.c
but not stand/libsa/ufsread.c which is size constrained)
use_pread / use_pwrite for libufs
Uses of these interfaces are in the UFS filesystem, geoms journal &
label, libsa changes, and libufs. They also permeate out into the
filesystem utilities fsck_ffs, newfs, growfs, clri, dump, quotacheck,
fsirand, fstyp, and quot. Some of these utilities should probably be
converted to directly use libufs (like dumpfs was for example), but
there does not seem to be much win in doing so.
Tested by: Peter Holm (pho@)
