* rk_cru is a cru driver that needs to be subclassed by
the real CRU driver
* rk_clk_pll handle the pll type clock on RockChip SoC, it's only read
only for now.
* rk_clk_composite handle the different composite clock types (with gate,
with mux etc ...)
* rk_clk_gate handle the RockChip gates
* rk_clk_mux handle the RockChip muxes (unused for now)
* Only clocks for supported devices are supported for now, the rest will be
added when driver support comes
* The assigned-clock* property are not handled for now so we rely a lot on the
bootloader to setup some initial values for some clocks.
[RFC7413]. It also includes a pre-shared key mode of operation in
which the server requires the client to be in possession of a shared
secret in order to successfully open TFO connections with that server.
The names of some existing fastopen sysctls have changed (e.g.,
net.inet.tcp.fastopen.enabled -> net.inet.tcp.fastopen.server_enable).
Reviewed by: tuexen
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14047
use it to regulate page daemon output.
This provides much smoother and more responsive page daemon output, anticipating
demand and avoiding pageout stalls by increasing the number of pages to match
the workload. This is a reimplementation of work done by myself and mlaier at
Isilon.
Reviewed by: bsdimp
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14402
A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset
information (Part Number, Serial Number) encoded in the "Serial Presence
Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and
reports the memory capacity of the DIMM, in megabytes. If the DIMM includes
a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported.
Reviewed by: cem
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14392
Discussed with: avg, cem
Tested by: avg, cem (previous version, no semantic changes)
Add chvgpio(4) driver for Intel Z8xxx SoC family. This product
was formerly known as Cherry Trail but Linux and OpenBSD drivers
refer to it as Cherry View. This driver is derived from OpenBSD
one so the name is kept for alignment with another BSD system.
Submitted by: Tom Jones <tj@enoti.me>
Reviewed by: gonzo, wblock(man page)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13086
Remove bitfields from defined structures as they are not portable.
Instead use shift and mask macros in the driver and nvmecontrol application.
NVMe is now working on powerpc64 host.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Reviewed by: imp, wma
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D13916
9079 race condition in starting and ending condesing thread for indirect vdevs
illumos/illumos-gate@667ec66f1b
The timeline of the race condition is the following:
[1] Thread A is about to finish condesing the first vdev in spa_condense_indirect_thread(),
so it calls the spa_condense_indirect_complete_sync() sync task which sets the
spa_condensing_indirect field to NULL. Waiting for the sync task to finish, thread A
sleeps until the txg is done. When this happens, thread A will acquire spa_async_lock
and set spa_condense_thread to NULL.
[2] While thread A waits for the txg to finish, thread B which is running spa_sync() checks
whether it should condense the second vdev in vdev_indirect_should_condense() by checking
the spa_condensing_indirect field which was set to NULL by spa_condense_indirect_thread()
from thread A. So it goes on and tries to spawn a new condensing thread in
spa_condense_indirect_start_sync() and the aforementioned assertions fails because thread A
has not set spa_condense_thread to NULL (which is basically the last thing it does before
returning).
The main issue here is that we rely on both spa_condensing_indirect and spa_condense_thread to
signify whether a condensing thread is running. Ideally we would only use one throughout the
codebase. In addition, for managing spa_condense_thread we currently use spa_async_lock which
basically tights condensing to scrubing when it comes to pausing and resuming those actions
during spa export.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
illumos/illumos-gate@5cabbc6b49https://www.illumos.org/issues/7614:
This project allows top-level vdevs to be removed from the storage pool with
“zpool remove”, reducing the total amount of storage in the pool. This
operation copies all allocated regions of the device to be removed onto other
devices, recording the mapping from old to new location. After the removal is
complete, read and free operations to the removed (now “indirect”) vdev must
be remapped and performed at the new location on disk. The indirect mapping
table is kept in memory whenever the pool is loaded, so there is minimal
performance overhead when doing operations on the indirect vdev.
The size of the in-memory mapping table will be reduced when its entries
become “obsolete” because they are no longer used by any block pointers in
the pool. An entry becomes obsolete when all the blocks that use it are
freed. An entry can also become obsolete when all the snapshots that
reference it are deleted, and the block pointers that reference it have been
“remapped” in all filesystems/zvols (and clones). Whenever an indirect block
is written, all the block pointers in it will be “remapped” to their new
(concrete) locations if possible. This process can be accelerated by using
the “zfs remap” command to proactively rewrite all indirect blocks that
reference indirect (removed) vdevs.
Note that when a device is removed, we do not verify the checksum of the data
that is copied. This makes the process much faster, but if it were used on
redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy
the wrong data, when we have the correct data on e.g. the other side of the
mirror. Therefore, mirror and raidz devices can not be removed.
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Prashanth Sreenivasa <pks@delphix.com>
When processor enters power-save state it releases resources shared with other
cpu threads which makes other cores working much faster.
This patch also implements saving and restoring registers that might get
corrupted in power-save state.
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Reviewed by: jhibbits, nwhitehorn, wma
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D14330
EXPORT_SYMS can be set to YES, NO, a list of symbols to export from a
module, or to a filename containing such a list. For the case that it
is set to a symbol list, replace spaces in the list with newlines, so
the created file is in the format expected by kmod_syms.awk.
Reviewed by: imp, jhb
MFC after: 1 month
Sponsored by: Turing Robotic Industries Inc.
Differential Revision: https://reviews.freebsd.org/D14284
This works similarly to the existing gzip compression support, but
zstd is typically faster and gives better compression ratios.
Support for this functionality must be configured by adding ZSTDIO to
one's kernel configuration file. dumpon(8)'s new -Z option is used to
configure zstd compression for kernel dumps. savecore(8) now recognizes
and saves zstd-compressed kernel dumps with a .zst extension.
Submitted by: cem (original version)
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13101,
https://reviews.freebsd.org/D13633
This came about when r328489 made ports modules builds no longer use the
in-tree share/mk files, but didn't cleanup MAKEOBJDIR from the
environment.
This fixes "Variable OBJTOP is recursive".
Sponsored by: Dell EMC
compilation under FreeBSD. The mthca driver was temporarily removed as
part of the Linux 4.9 RoCE/infinband upgrade.
Top commit in Linux source tree:
69973b830859bc6529a7a0468ba0d80ee5117826
Sponsored by: Mellanox Technologies
o added struct ipfw_dyn_info that keeps all needed for ipfw_chk and
for dynamic states implementation information;
o added DYN_LOOKUP_NEEDED() macro that can be used to determine the
need of new lookup of dynamic states;
o ipfw_dyn_rule now becomes obsolete. Currently it used to pass
information from kernel to userland only.
o IPv4 and IPv6 states now described by different structures
dyn_ipv4_state and dyn_ipv6_state;
o IPv6 scope zones support is added;
o ipfw(4) now depends from Concurrency Kit;
o states are linked with "entry" field using CK_SLIST. This allows
lockless lookup and protected by mutex modifications.
o the "expired" SLIST field is used for states expiring.
o struct dyn_data is used to keep generic information for both IPv4
and IPv6;
o struct dyn_parent is used to keep O_LIMIT_PARENT information;
o IPv4 and IPv6 states are stored in different hash tables;
o O_LIMIT_PARENT states now are kept separately from O_LIMIT and
O_KEEP_STATE states;
o per-cpu dyn_hp pointers are used to implement hazard pointers and they
prevent freeing states that are locklessly used by lookup threads;
o mutexes to protect modification of lists in hash tables now kept in
separate arrays. 65535 limit to maximum number of hash buckets now
removed.
o Separate lookup and install functions added for IPv4 and IPv6 states
and for parent states.
o By default now is used Jenkinks hash function.
Obtained from: Yandex LLC
MFC after: 42 days
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D12685
- Remove the shim interface that allowed bwn(4) to use either siba_bwn or
bhnd(4), replacing all siba_bwn calls with their bhnd(4) bus equivalents.
- Drop the legay, now-unused siba_bwn bus driver.
- Clean up bhnd(4) board flag defines referenced by bwn(4).
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13518
superblock, and the kernel will fail to link when UFS is not built
in. This commit makes it depend on a small portion of FFS bits and
thereby fixes build for this situation.
This is intended as an interim bandaid, and the actual superblock
reading code should probably be made independent of UFS, so we do
not need to depend on it (see kib@'s comment in the review for
details), and we will revisit this once the superblock check hashes
are all in place.
Differential Revision: https://reviews.freebsd.org/D14092
net80211/ieee80211_ageq.c was present twice in sys/conf/files so leave the
correctly sorted one. dev/wpi/if_wpi.c was present in sys/conf/files as well
as sys/conf/files.amd64 and sys/conf/files.i386 so prefer the sys/conf/files
entry.
Reviewed by: allanjude, rstone
gone_in(majar, msg); If we're running in FreeBSD major, tell
the user this code may be deleted soon.
If we're running in FreeBSD major - 1,
the the user is deprecated and will
be gone in major.
Otherwise say nothing.
gone_in_dev(dev, major, msg) Just like gone_in, except use device_printf.
New tunable / sysctl debug.oboslete_panic: 0 - don't panic,
1 - panic in major or newer , 2 - panic in major - 1 or newer
default: 0
if NO_OBSOLETE_CODE is defined, then both of these turn into compile
time errors when building for major. Add options NO_OBSOLETE_CODE to
kernel build system.
This lets us tag code that's going away so users know it will be gone,
as well as automatically manage things.
Differential Review: https://reviews.freebsd.org/D13818
Previously, MAKESYSPATH as well as '-m' directives in MAKEFLAGS would cause
any port rebuilt during the PORTS_MODULES stage to consume system makefiles
from $(SRCROOT)/share/mk instead of those installed under /usr/share/mk.
For kernel modules that need to build against an updated src tree this
makes sense; less so for <bsd.port.mk> or any userspace library or utility
the port may also happen to install.
Before 11.0, this probably didn't matter much in practice. But the addition
of src.libnames.mk under $(SRCROOT)/share/mk in 11.0 breaks any consumer of
bsd.prog.mk and DPADD/LDADD during PORTS_MODULES.
Address the build breakage by removing MAKESYSPATH and any occurrence of
'-m' from MAKEFLAGS in the environment created for the port build.
Instead set SYSDIR so that any kmod built by the port will still consume
conf/kmod.mk from the updated src tree, assuming it uses <bsd.kmod.mk>
Reviewed by: bdrewery
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13053
leaks. We assume each source can be taken / dropped only once and
don't recurse. These are only enabled via DA_TRACK_REFS or
INVARIANTS. There appreas to be a reference leak under extreme load,
and these should help us colaberatively work it out. It also documents
better the reference / holding protocol better.
Reviewed by: ken@, scottl@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14040
Similarly as other extres pseudo-drivers, implement phy by using kobj model.
This detaches it from provider device, so single device driver can export
multiple different phys. Additionally, this allows phy to be subclassed to
more specialized drivers, like is USB OTG phy, or PCIe phy with hot-plug
capability.
Tested by: manu (previous version, on Allwinner board)
MFC after: 1 month
Both flags do the same thing but -n is more widely supported.
Reviewed By: jhb, emaste
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D13936
Make XICS to be OPAL-aware.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@semihalf.com>
Sponsored by: FreeBSD Foundation
Some PowerQUICC and QorIQ platforms have a L2 cache managed via the
memory-mapped configuration registers, and appear as a node in the device
tree. This adds basic support to enable the cache.
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
Provide initial support for PCIe host controller as
well as for IOMMU mapping. This commit allows proper
bus enumeration, but does not guarantee DMA operations
are working.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@semihalf.com>
Sponsored by: FreeBSD Foundation
For each we need to walk the MADT to find which we have, then add the
driver as needed. As each may have a child they will each walk the same
table to find these details.
Reviewed by: mmel
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8720
This adds a new acpi_bus interface with a map_intr method. This is similar
to the Open Firmware map_intr method and allows us to create the needed
mapping from ACPI space to INTRNG space.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8617
OPAL is a dedicated firmware acting as a hypervisor.
Add generic functions to provide all access.
Created by: Nathan Whitehorn <nw@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Iwasaki-san's copyright over. Remove FIXME code that couldn't possibly
work. Call tc_settime() with our estimate of the delta we've been
alseep (the one we print) to adjust the time. Not sure what to do
about callouts, so keep the small #ifdef in place there.
Differential Revision: https://reviews.freebsd.org/D13823
Add an implementation of the intrinsics invoked by __builtin_ctz{,ll} and
__builtin_clz{,ll}, and include this compilation unit on platforms that lack
assembly intrinsics for those builtins (MIPS and RISC-V).
Future cleanup work might involve bringing these into a mini libcompiler-rt
for the standalone kernel environment. Or cleaning up the approach upstream
takes for builtins in standalone environments (or just FreeBSD). For now,
at least this builds, and doesn't require modifying the vendor code.
Reported by: jeff, markj, mizhka
Reviewed by: jhb (earlier version), rpokala (comment text earlier version)
Sponsored by: Dell EMC Isilon
Disable Zstd experimental support for __BMI__ intrinsics, when built with
-march=foo supporting such intrinsics, to avoid attempting to include
immintrin.h. If a later Zstd marks the support non-experimental, we may want
to revisit this approach.
Submitted by: jkim
Reported by: jkim, "Oliver Hartmann" <ohartmann AT walstatt.org>
a mask and value to compare with the Main ID Register. If these match then a
function is called to handle the installation of the erratum workaround.
No errata are currently handled, however this will change soon in a future
commit.
MFC after: 1 week
Sponsored by: DARPA, AFRL
By disabling the -Winline warning. Fixes the powerpc and sparc64 build
after r327706.
Note: MIPS and RISCV builds still broken due to absense of __ctzdi2 (aka
__builtin_ctzll) in their libgcc or libcompiler-rt libraries.
Reported by: markj
Sponsored by: Dell EMC Isilon
We currently use a set of subroutines in kern_gzio.c to perform
compression of user and kernel core dumps. In the interest of adding
support for other compression algorithms (zstd) in this role without
complicating the API consumers, add a simple compressor API which can be
used to select an algorithm.
Also change the (non-default) GZIO kernel option to not enable
compressed user cores by default. It's not clear that such a default
would be desirable with support for multiple algorithms implemented,
and it's inconsistent in that it isn't applied to kernel dumps.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D13632
Mock userspace headers and include mocked headers first in compilation
command to inject kernel headers and override e.g., malloc(3) with
malloc(9).
Submitted by: allanjude
Reviewed by: imp (earlier version), bapt (earlier version)
Differential Revision: https://reviews.freebsd.org/D10407
The emac bindings that are landing in Linux 4.15 specify a syscon property
on the emac node that point to /soc/syscon. Use this property if it's
specified, but maintain backwards compatibility with the old method.
The older method is still used for boards that we get .dtb from u-boot, such
as pine64, that did not yet have stable emac bindings.
Tested on: Banana Pi-M3 (a83t)
Tested on: Pine64 (a64)
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13296
Enable the hardclock-based watchdog previously conditional on the
SW_WATCHDOG option whenever hardware watchdogs are not found, and
watchdogd attempts to enable the watchdog. The SW_WATCHDOG option
still causes the sofware watchdog to be enabled even if there is a
hardware watchdog. This does not change the other software-based
watchdog enabled by the --softtimeout option to watchdogd.
Note that the code to reprime the watchdog during kernel core dumps is
no longer conditional on SW_WATCHDOG. I think this was previously a bug.
Reviewed by: imp alfred bjk
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D13713
These are intended for debugging purposes and should not be added to
"generic" kernel configurations since they result in a nontrivial amount
of memory being set aside for this purpose, can break if kernel modules are
unloaded, and can potentially leak a dangerous amount of information about
timestamps used as a source of kernel entropy.
The ep(4) driver is the only consumer of the two functions from
elink.c. I removed the standalone module as well, and most likely,
the module metadata is not needed anywhere, but this is for later
cleanup.
Discussed with: imp, jhb
Sponsored by: The FreeBSD Foundation
The i386 FPU (AKA npx) code does not depend on ISA devices at all,
after the support for IRQ13 FPU exceptions was removed. Put the file
into the expected place in the kernel source tree.
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
