Commit Graph

110 Commits

Author SHA1 Message Date
Emmanuel Vadot
dbfb4063ae arm: Add kern_clocksource.c directly in files.arm
This files is needed and included in all our config so move it to a common
location.

MFC after:	2 weeks
2019-04-16 20:04:22 +00:00
Alan Cox
44d0efb215 Eliminate kmem_alloc_contig()'s unused arena parameter.
Reviewed by:	hselasky, kib, markj
Discussed with:	jeff
Differential Revision:	https://reviews.freebsd.org/D16799
2018-08-20 15:57:27 +00:00
Andrew Turner
e4c66ddabd Remove IPI_IRQ_START and IPI_IRQ_END from the arm kernel config files.
These are unneeded with INTRNG.
2018-07-28 06:46:10 +00:00
Emmanuel Vadot
7f7d3ba77c arm: Fix duplicate ehci DRIVER_MODULE
Name each ehci driver uniquely.
This remove the warning printed at each arm boot :
module_register: cannot register simplebus/ehci from kernel; already loaded from kernel
2018-04-27 21:05:58 +00:00
Oleksandr Tymoshenko
108117cc22 [ofw] fix errneous checks for OF_finddevice(9) return value
OF_finddevices returns ((phandle_t)-1) in case of failure. Some code
in existing drivers checked return value to be equal to 0 or
less/equal to 0 which is also wrong because phandle_t is unsigned
type. Most of these checks were for negative cases that were never
triggered so trhere was no impact on functionality.

Reviewed by:	nwhitehorn
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D14645
2018-03-20 00:03:49 +00:00
Emmanuel Vadot
74e0613ead dwmmc: Fully subclass driver
Fully subclass the dwmmc driver and split every driver into multiple files.

There is still a few quirks in the dwmmc driver that will need some work.

Tested On: Pine64 Rock64

Differential Revision:	https://reviews.freebsd.org/D13615
2017-12-30 22:01:17 +00:00
Ian Lepore
2d09b07279 Make kernel option KERNVIRTADDR optional, remove it from std.<platform>
files that can use the default value.

It used to be required that the low-order bits of KERNVIRTADDR matched
the low-order bits of the physical load address for all arm platforms.
That hasn't been a requirement for armv6 platforms since FreeBSD 10.
There is no longer any relationship between load addr and KERNVIRTADDR
except that both must be aligned to a 2 MiB boundary.

This change makes the default KERNVIRTADDR value 0xc0000000, and removes the
options from all the platforms that can use the default value.  The default
is now defined in vmparam.h, and that file is now included in a few new
places that reference KERNVIRTADDR, since it may not come in via the
forced-include of opt_global.h on the compile command line.
2017-12-30 00:20:49 +00:00
Emmanuel Vadot
ee070097f2 Revert r327250 as it broke the build for some armv6 kernel and all armv4/5
Reported by:	ian
2017-12-28 07:31:14 +00:00
Emmanuel Vadot
d06955f9bd arm: Add kern/kern_clocksource.c to files.arm
Instead of adding it to every files.vendor, add it to the common arch file.
2017-12-27 21:39:57 +00:00
Pedro F. Giffuni
af3dc4a7ca sys/arm: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:04:10 +00:00
Warner Losh
094fc1ed0f Tag all armv7 kernels as such in their machine config line.
Transition all boards that support arm cortex CPUs to armv7. This
leaves two armv6 kernels in the tree. RPI-B, which uses the BCM2835
which has a ARM1176 core, and VERSATILEPB, which is a qemu board setup
around the time RPI-B went in. Copy std.armv6 to std.armv7, even
though that duplicates a lot of stuff. More work needs to be done to
sort out the duplication.

Differential Revision: https://reviews.freebsd.org/D12027
2017-10-05 23:01:50 +00:00
Andrew Turner
57521c21b1 Add a delay count to the last few places. This will help make MULTIDELAY
a requirement on armv6 with PLATFORM.
2017-07-04 17:15:23 +00:00
Andrew Turner
6f5db7909a Port the Samsung ARM code to use PLATFORM and PLATFORM_SMP. This will help
move it into the GENERIC kernel config.
2017-06-03 20:02:12 +00:00
Michal Meloun
93a065e749 Remake support for SMP kernel on UP cpu:
- Use new option SMP_ON_UP instead of (mis)using specific CPU type.
   By this, any SMP kernel can be compiled with SMP_ON_UP support.
 - Enable runtime detection of CPU multiprocessor extensions only
   if SMP_ON_UP option is used. In other cases (pure SMP or UP),
   statically compile only required variant.
 - Don't leak multiprocessor instructions to UP kernel.
 - Correctly handle data cache write back to point of unification.
   DCCMVAU is supported on all armv7 cpus.
 - For SMP_ON_UP kernels, detect proper TTB flags on runtime.

Differential Revision: https://reviews.freebsd.org/D9133
2017-02-02 06:14:44 +00:00
Emmanuel Vadot
7073d12c4d ofw_spi: Parse property for the SPI mode and CS polarity.
As cs is stored in a uint32_t, use the last bit to store the
active high flag as it's unlikely that we will have that much CS.

Reviewed by:	loos
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D8614
2016-12-18 14:54:20 +00:00
Andrew Turner
df7675353e Stop including fdt_common.h from the arm code when it's unneeded.
Sponsored by:	ABT Systems Ltd
2016-11-14 11:41:22 +00:00
Andrew Turner
639e990770 Remove more unneeded users of the fdt_pic_decode_t table.
Sponsored by:	ABT Systems Ltd
2016-11-11 14:22:35 +00:00
Hans Petter Selasky
d3bf5efc1f Fix device delete child function.
When detaching device trees parent devices must be detached prior to
detaching its children. This is because parent devices can have
pointers to the child devices in their softcs which are not
invalidated by device_delete_child(). This can cause use after free
issues and panic().

Device drivers implementing trees, must ensure its detach function
detaches or deletes all its children before returning.

While at it remove now redundant device_detach() calls before
device_delete_child() and device_delete_children(), mostly in
the USB controller drivers.

Tested by:		Jan Henrik Sylvester <me@janh.de>
Reviewed by:		jhb
Differential Revision:	https://reviews.freebsd.org/D8070
MFC after:		2 weeks
2016-10-17 10:20:38 +00:00
Michal Meloun
7cc70732a3 ARM: SEV/WFE instructions are implemented starting from ARMv6K,
use it directly.

MFC after: 1 week
2016-10-06 13:18:18 +00:00
Andrew Turner
1834282de6 Split CPU_CORTEXA into CPU_CORTEXA8, for the Cortex-A8, and CPU_CORTEXA_MP,
for later Cortex-A CPUs that support the Multiprocessor Extensions. This
will be needed to support both in a single GENERIC kernel while still
being able to only build for a single SoC.

Reviewed by:	mmel
Relnotes:	yes
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D8138
2016-10-04 12:25:44 +00:00
Andrew Turner
0a4c0732a9 Restrict where we need to define fdt_fixup_table to just PowerPC and
Marvell.

Sponsored by:	ABT Systems Ltd
2016-09-23 14:11:23 +00:00
Andrew Turner
c35b5d8372 Remove bus_dma_get_range and bus_dma_get_range_nb on armv6. We only need
this on a few earlier arm SoCs.

Reviewed by:	manu (earlier version)
Sponsored by:	ABT Systems Ltd
2016-09-23 12:38:05 +00:00
Ian Lepore
392a8e4408 Correct syntax errors that only show up when compiled with INVARIANTS. 2016-07-09 18:43:15 +00:00
Pedro F. Giffuni
255eff3b0d sys/arm: Minor spelling fixes.
Only affects comments: no functional change.
2016-05-04 15:48:59 +00:00
Ruslan Bukin
30b72b6871 Move arm's devmap to some generic place, so it can be used
by other architectures.

Reviewed by:	imp
Differential Revision:	https://reviews.freebsd.org/D6091
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-04-26 11:53:37 +00:00
Andrew Turner
59c3cb81c1 Rename ARM_INTRNG and MIPS_INTRNG to INTRNG. This will help with machine
independent code that needs to know about INTRNG such as PCI drivers.

Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
2016-04-15 16:05:41 +00:00
Pedro F. Giffuni
74b8d63dcc Cleanup unnecessary semicolons from the kernel.
Found with devel/coccinelle.
2016-04-10 23:07:00 +00:00
Andrew Turner
7133fe0f33 Almost all copies of platform_mp_init_secondary just called
intr_pic_init_secondary. Replace them with a direct call. On BCM2836
and ARMADA XP we need to add this function, but it can be empty.

Reviewed by:	ian, imp
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D5460
2016-02-26 16:04:47 +00:00
Andrew Turner
3210b87554 Remove platform_mp_probe as it's almost identical on most ARM SoCs, and
slightly wrong on the others. We should just check if mp_ncpus is set to
more than one CPU as we may wish to run on a single core even when SMP is
available.

Reviewed by:	ian
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D5458
2016-02-26 15:54:34 +00:00
Andrew Turner
243b36c321 Remove platform_ipi_send, it's an unneeded as all implementations are
identical.

Sponsored by:	 ABT Systems Ltd
2016-02-25 20:48:23 +00:00
Svatopluk Kraus
7758916f44 Move ARM_L2_PIPT option to std.armv6 for all armv6 platforms.
Only L2 PIPT cache is supported for __ARM_ARCH >= 6.

In fact, this is just a pure proclamation as this option is used
only in armv4 specific files now.
2016-02-22 11:47:28 +00:00
Andrew Turner
647a3bac7e Stop defining fdt_pic_table when building for ARM_INTRNG. 2016-02-11 11:49:27 +00:00
Michal Meloun
a89156f53f ARM: Use new ARMv6 naming conventions for cache and TLB functions
in all but ARMv4 specific files.
Expand ARMv6 compatibility stubs in cpu-v4.h. Use physical address
in L2 cache functions if ARM_L2_PIPT is defined.
2016-02-05 14:57:41 +00:00
Adrian Chadd
2b3ad18853 [intrng] Migrate the intrng code from sys/arm/arm to sys/kern/subr_intr.c.
The ci20 port (by kan@) is going to reuse almost all of the intrng code
since the SoC in question looks suspiciously like someone took an ARM
SoC design and replaced the ARM core with a MIPS core.

* migrate out the code;
* rename ARM_ -> INTR_;
* rename arm_ -> intr_;
* move the interrupt flush routine from intr.c / intrng.c into
  arm/machdep_intr.c - removing the code duplication and removing
  the ARM specific bits from here.

Thanks to the Star Wars: The Force Awakens premiere line for allowing
me a couple hours of quiet time to finish the universe builds.

Tested:

* make universe

TODO:

* The structure definitions in subr_intr.c still includes machine/intr.h
  which requires one duplicates all of the intrng definitions in
  the platform code (which kan has done, and I think we don't have to.)

  Instead I should break out the generic things (function declarations,
  common intr structures, etc) into a separate header.

* Kan has requested I make the PIC based IPI stuff optional.
2015-12-18 05:43:59 +00:00
Zbigniew Bodek
6a5289b068 Add support for exynos5_ehci in loader
Create new driver which initializes Arndale PHY and calls ehci_init

Reviewed by:   hselasky
Submitted by:  Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by:  Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4192
2015-11-27 18:22:04 +00:00
Andrew Turner
ed18006cbf Create device options for the two common ARM timers.
Sponsored by:	ABT Systems Ltd
2015-11-21 16:23:56 +00:00
Andrew Turner
210d6af74d Move more bus_space_* files to be built by files.arm. This leaves the
definition in a file.* file under sys/arm/arm in the few cases we need it
for non-fdt platforms.

Sponsored by:	ABT Systems Ltd
2015-11-21 15:30:08 +00:00
Warner Losh
c192c5d300 Makeoption ARM_LITLE_ENDIAN does nothing. Remove it since it isn't
consistently used. It was a carry over from NetBSD that FreeBSD
doesn't use.
2015-11-20 21:49:46 +00:00
Andrew Turner
805471578e Remove bus_space_asm_generic.S from the per-SoC files.* files, it's already
in files.arm.

Sponsored by:	ABT Systems Ltd
2015-11-20 19:48:32 +00:00
Andrew Turner
aeef645f92 Stop setting {KERN,}PHYSADDR on armv6, it's unneeded.
Sponsored by:	ABT Systems Ltd
2015-11-20 16:12:22 +00:00
Zbigniew Bodek
166800cd36 Fix buffer overflow in exynos5_ehci
Use proper size of exynos_ehci_softc, not the generic one.

Reviewed by:   andrew
Submitted by:  Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by:  Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4189
2015-11-17 12:50:45 +00:00
Andrew Turner
4648ee9525 Remove the s3c2xx0 code, it's no longer used. As far as I know I as the
main user of this code, however I haven't used it in over two years, and
don't expect to in the future.
2015-10-28 13:14:16 +00:00
Ian Lepore
7ce00ee7b4 Rename arm_init_secondary_ic() -> arm_pic_init_secondary(). The latter is
the name the function will have when the new ARM_INTRNG code is integrated,
and doing this rename first will make it easier to toggle the new interrupt
handling code on/off with a config option for debugging.
2015-10-18 16:54:34 +00:00
Ian Lepore
d1e99670ae Use IIC_EBUSBSY and IIC_BUSERR status values consistantly across all drivers.
Make it clearer what each one means in the comments that define them.

IIC_BUSBSY was used in many places to mean two different things, either
"someone else has reserved the bus so you have to wait until they're done"
or "the signal level on the bus was not in the state I expected before/after
issuing some command".

Now IIC_BUSERR is used consistantly to refer to protocol/signaling errors,
and IIC_BUSBSY refers to ownership/reservation of the bus.
2015-10-09 22:49:50 +00:00
Konstantin Belousov
edc8222303 Make kstack_pages a tunable on arm, x86, and powepc. On i386, the
initial thread stack is not adjusted by the tunable, the stack is
allocated too early to get access to the kernel environment. See
TD0_KSTACK_PAGES for the thread0 stack sizing on i386.

The tunable was tested on x86 only.  From the visual inspection, it
seems that it might work on arm and powerpc.  The arm
USPACE_SVC_STACK_TOP and powerpc USPACE macros seems to be already
incorrect for the threads with non-default kstack size.  I only
changed the macros to use variable instead of constant, since I cannot
test.

On arm64, mips and sparc64, some static data structures are sized by
KSTACK_PAGES, so the tunable is disabled.

Sponsored by:	The FreeBSD Foundation
MFC after:	2 week
2015-08-10 17:18:21 +00:00
Zbigniew Bodek
721555e7ee Fix KSTACK_PAGES issue when the default value was changed in KERNCONF
If KSTACK_PAGES was changed to anything alse than the default,
the value from param.h was taken instead in some places and
the value from KENRCONF in some others. This resulted in
inconsistency which caused corruption in SMP envorinment.

Ensure all places where KSTACK_PAGES are used the opt_kstack_pages.h
is included.

The file opt_kstack_pages.h could not be included in param.h
because was breaking the toolchain compilation.

Reviewed by:   kib
Obtained from: Semihalf
Sponsored by:  The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3094
2015-07-16 10:46:52 +00:00
Andrew Turner
ace157c3a9 Use the new gic option on all configs that need it. 2015-05-10 12:13:27 +00:00
Andrew Turner
405ada37fb Add support for the uart classes to set their default register shift value.
This is needed with the pl011 driver. Before this change it would default
to a shift of 0, however the hardware places the registers at 4-byte
addresses meaning the value should be 2.

This patch fixes this for the pl011 when configured using the fdt. The
other drivers have a default value of 0 to keep this a no-op.

MFC after:	1 week
2015-04-11 17:16:23 +00:00
Andrew Turner
087af50ab8 Include vm/pmap.h for pmap_kextract. 2015-04-04 23:03:11 +00:00
Andrew Turner
0ebebb1260 Build the cpufunc_asm_* files based on the cpu type, not which config file
we happen to be building.
2015-03-29 22:43:39 +00:00