with all dhcp parameters we might be interested in.
Some DHCP server like the new kea (by ISC) expect it.
This makes pxeboot functional with ISC kea.
Submitted by: Vincent Legout <vincent.legout@gandi.net>
MFC after: 1 month
Sponsored by: Gandi.net
A grant-table user-space device will allow user-space applications to map
and share grants (Xen way to share memory) among Xen domains. This grant
table user-space device has been tested with the QEMU Qdisk Xen backed.
Submitted by: jaggi
Reviewed by: royger
Differential review: https://reviews.freebsd.org/D7293
Add a reference count to xenisrc. This is required for implementation of
unmap-notifications in the grant table userspace device (gntdev). We need to
hold a reference to the event channel port, in case the user deallocates the
port before we send the notification.
Submitted by: jaggi
Reviewed by: royger
Differential review: https://reviews.freebsd.org/D7429
first EFI device if we can't find the one from which the image was loaded.
Reviewed by: allanjude,imp,jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6780
- Move the SYSINIT to DRIVER/SECOND, i.e. after the vm_guest becomes
determistic.
- Minor style changes.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8370
Mainly because the host side only set TCPCS and IPCS even for
UDP datagrams.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8369
And use large default temporary channel packer buffer; we really
don't want it to be expanded at run time.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8367
Summary:
The hardware does not expose a classic SMBus interface.
Instead it has a lower level interface that can express a far richer
I2C protocol than what smbus offers. However, the interface does not
provide a way to explicitly generate the I2C stop and start conditions.
It's only possible to request that the stop condition is generated
after transferring the next byte in either direction. So, at least
one data byte must always be transferred.
Thus, some I2C sequences are impossible to generate, e.g., an equivalent
of smbus quick command (<start>-<slave addr>-<r/w bit>-<stop>).
At the same time isl(4) and cyapa(4) are moved to iicbus and now they use
iicbus_transfer for communication. Previously they used smbus_trans()
interface that is not defined by the SMBus protocol and was implemented
only by ig4(4). In fact, that interface was impossible to implement
for the typical SMBus controllers like intpm(4) or ichsmb(4) where
a type of the SMBus command must be programmed.
The plan is to remove smbus_trans() and all its uses.
As an aside, the smbus_trans() method deviates from the standard,
but perhaps backwards, FreeBSD convention of using 8-bit slave
addresses (shifted by 1 bit to the left). The method expects
7-bit addresses.
There is a user facing consequence of this change.
A user must now provide device hints for isl and cyapa that specify an iicbus to use
and a slave address on it.
On Chromebook hardware where isl and cyapa devices are commonly found
it is also possible to use a new chromebook_platform(4) driver that
automatically configures isl and cyapa devices. There is no need to
provide the device hints in that case,
Right now smbus(4) driver tries to discover all slaves on the bus.
That is very dangerous. Fortunately, the probing code uses smbus_trans()
to do its job, so it is really enabled for ig4 only.
The plan is to remove that auto-probing code and smbus_trans().
Tested by: grembo, Matthias Apitz <guru@unixarea.de> (w/o
chromebook_platform)
Discussed with: grembo, imp
Reviewed by: wblock (docs)
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D8172
It is possible that wrmsr in amd_stop_pmc() causes an overflow in a counter
that it disables. In that case a non-maskable interrupt is generated. The
interrupt handler code was written in such a way that it would re-enable the
counter. That would lead to an unexpected interrupt later on.
This problem was easy to reproduce with
$ pmcstat -T -P instructions -t $pid
if the target process is sufficiently busy and there are context switches from
time to time. There would be a lot of interrupts to "race" with amd_stop_pmc()
called during the context switches. The problem affected only AMD processors.
While there, trace whether amd_intr() claimed an interrupt.
Reviewed by: jhb
MFC after: 2 weeks
When an exception is thrown the unwinder must unwind its own C source
(starting with _Unwind_RaiseException in UnwindLevel1.c), so it needs to
be built with unwinding data.
Convert vm_fault_hold()'s Boolean variables that are only used
internally to "bool". Add a comment describing why the one
remaining "boolean_t" was not converted.
Reviewed by: kib
MFC after: 8 days
(gpt)zfsboot will read one-time boot directives from a special ZFS pool
area. The area was previously described as "Boot Block Header", but
currently it is know as Pad2, marked as reserved and is zeroed out on
pool creation. The new code interprets data in this area, if any, using
the same format as boot.config. The area is immediately wiped out.
Failure to parse the directives results in a reboot right after the
cleanup. Otherwise the boot sequence proceeds as usual.
zfsbootcfg writes zfsboot arguments specified on its command line to the
Pad2 area of a disk identified by vfs.zfs.boot.primary_pool and
vfs.zfs.boot.primary_vdev kenv variables that are set by loader during
boot. Please see the manual page for more.
Thanks to all who reviewed, contributed and made suggestions! There are
many potential improvements to the feature, please see the review for
details.
Reviewed by: wblock (docs)
Discussed with: jhb, tsoome
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D7612
not a bitfield. For the intended usage - being passed either MNT_WAIT,
or MNT_NOWAIT - this shouldn't introduce any changes in behaviour.
Reviewed by: jhb@
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8373
The CHANSTS register is a split 64-bit register on CBDMA units before
hardware v3.3. If a torn read happens during ioat_process_events(),
software cannot know when to stop completing descriptors correctly.
So, just use the device-pushed main memory channel status instead.
Remove the ioat_get_active() seatbelt as well. It does nothing if the
completion address is valid.
Sponsored by: Dell EMC Isilon
There are 4 independent knobs in T5+ chips to include or exclude PAUSE
frames from the "total frames" and "multicast frames" counters in either
direction. This change lets the driver deal with any combination of
these settings.
but never released. Since no real hardware was released with this ID,
just drop it from the aacraid driver. This paves the path for future
drivers for hardware that actually has this ID.
Submitted by: Scott Benesh from Microsemi.
Differential Revision: https://reviews.freebsd.org/D8377
MFC After: 3 days
data structure sizes when mounting and reloading UFS/FFS
filesystems by using a u_long rather than an int for the size.
Reported by: Mariusz Zaborski <oshogbo@>
MFC after: 1 week
Specifically, use .Ta instead of tabs to separate column entries. While
here fix a few other things:
- Use .Sy for all column headers (previously only the first column header
was bold)
- Use .Dv to markup constants used for MIB names.
- Use "1234" and "4321" for the byte order descriptions without
thousands separators.
- Mark up header files in the first table with .In.
MFC after: 2 weeks
It allows to avoid extra GEOM providers flapping without significant need.
Since GEOM got resize support, we don't need to reopen provider to get new
size. If provider was orphaned and no longer valid, ZFS should already
know that, and in such case reopen should be done in full as expected.
MFC after: 2 weeks
In case of vdev detach, causing top level mirror vdev destruction, leaf
vdev changes its GUID to one of the destroyed mirror, that creates race
condition when GUID in vdev label may not match one in the pool config.
This change replicates logic nuance of vdev_validate() by adding special
exception, matching the vdev GUID against the top level vdev GUID.
Since this exception is not completely reliable (may give false positives
if we fail to erase label on detached vdev), use it only as last resort.
Quick way to reproduce this scenario now is detach vdev from a pool with
enabled autoextend. During vdev detach autoextend logic tries to reopen
remaining vdev, that always fails now since in-memory configuration is
already updated, while on-disk labels are not yet.
MFC after: 2 weeks
Previously, if the timeout was less than 10 seconds, for example, about
8 seconds, then the watchdog timer would be let to expire before patting
the watchdog.
MFC after: 2 weeks
Just using vm_paddr_t value with all bits set.
That should work as long as the type is unsigned.
While there, fix a couple of whitespace issues nearby.
MFC after: 1 week
X-MFC with: r307903
we have to refresh it ... always. This fixes problems reported in NetMap
with em(4) devices after conversion to extended descriptor format in
svn r293331.
Submitted by: luigi@
Reported by: franco@opnsense.org
MFC after: 2 days
