Like other dwc3 controller, on Xilinx ZynqMP the base node is just here
to provide resets, the main dwc3 controller node is a child node.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Each channel gets its own DMA resources, cleanup and "bufferpool"
tasks, and a separate cleanup taskqueue to isolate channels operation
as much as possible to avoid various kernel panics under heavy network
load.
As a side-effect of this work, dpaa2_buf structure is simplified and
all of the functions to re-seed those buffers are gathered now in
dpaa2_buf.h and .c files; functions to work with channels are
extracted into dpaa2_channel.h and .c files as well.
Reported by: dch
Reviewed by: bz
Approved by: bz (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D41296
It is a simple RTC found in some Arm SoCs, e.g. the Arm Juno.
Reviewed by: manu
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D41267
Fix a boot-time panic in qcom_mdio_ipq4018 due to a missing bus function
and hook the file up to the build so that it will not rot away.
Test booted on an ipq807x in 2022.
X-Differential Revision: extracted from D37882
Add support for the gpio controller found in the ZynqMP SoC.
The registers are the same as the Zynq 7000, just the number of
banks/pins per banks differs.
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 2 weeks
At least one downstream (CheriBSD) overrides -march here. Instead of
hard-coding the target, simply append the crypto extension to whatever's
already there.
No functional change intended.
Reviewed by: imp, andrew
MFC after: 1 week
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D40537
Add a n attachment to the pci_host_generic driver for the Arm DEN0115
PCI Configuration Space Access Firmware Interface [1]. This can be used
when PCI controllers need to implement quirks in the PCI root bus.
To handle this the firmware implements a SMCCC interface the driver can
use to read and write the configuration register.
This has been tested on a Raspberry Pi 4 booting with EDK2.
[1] https://developer.arm.com/documentation/den0115/latest
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39228
Add DPAA2 console support for MC and AIOP (latter untested) for FDT
systems. ACPI systems are prepared but need some proper bus function
in order to get the address from MC (and likely a file splitup then).
This will come at a later stage once other ACPI/FDT bus parts are
cleared up.
The work was originally done in July 2022 and finally switched to
bus_space[1] lately to be ready for main.
Suggested by: andrew [1]
Reviewed by: dsl
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D38592
Notable upstream pull request merges:
#12194 Fix short-lived txg caused by autotrim
#13368 ZFS_IOC_COUNT_FILLED does unnecessary txg_wait_synced()
#13392 Implementation of block cloning for ZFS
#13741 SHA2 reworking and API for iterating over multiple implementations
#14282 Sync thread should avoid holding the spa config write lock
when possible
#14283 txg_sync should handle write errors in ZIL
#14359 More adaptive ARC eviction
#14469 Fix NULL pointer dereference in zio_ready()
#14479 zfs redact fails when dnodesize=auto
#14496 improve error message of zfs redact
#14500 Skip memory allocation when compressing holes
#14501 FreeBSD: don't verify recycled vnode for zfs control directory
#14502 partially revert PR 14304 (eee9362a7)
#14509 Fix per-jail zfs.mount_snapshot setting
#14514 Fix data race between zil_commit() and zil_suspend()
#14516 System-wide speculative prefetch limit
#14517 Use rw_tryupgrade() in dmu_bonus_hold_by_dnode()
#14519 Do not hold spa_config in ZIL while blocked on IO
#14523 Move dmu_buf_rele() after dsl_dataset_sync_done()
#14524 Ignore too large stack in case of dsl_deadlist_merge
#14526 Use .section .rodata instead of .rodata on FreeBSD
#14528 ICP: AES-GCM: Refactor gcm_clear_ctx()
#14529 ICP: AES-GCM: Unify gcm_init_ctx() and gmac_init_ctx()
#14532 Handle unexpected errors in zil_lwb_commit() without ASSERT()
#14544 icp: Prevent compilers from optimizing away memset()
in gcm_clear_ctx()
#14546 Revert zfeature_active() to static
#14556 Remove bad kmem_free() oversight from previous zfsdev_state_list
patch
#14563 Optimize the is_l2cacheable functions
#14565 FreeBSD: zfs_znode_alloc: lock the vnode earlier
#14566 FreeBSD: fix false assert in cache_vop_rmdir when replaying ZIL
#14567 spl: Add cmn_err_once() to log a message only on the first call
#14568 Fix incremental receive silently failing for recursive sends
#14569 Restore ASMABI and other Unify work
#14576 Fix detection of IBM Power8 machines (ISA 2.07)
#14577 Better handling for future crypto parameters
#14600 zcommon: Refactor FPU state handling in fletcher4
#14603 Fix prefetching of indirect blocks while destroying
#14633 Fixes in persistent error log
#14639 FreeBSD: Remove extra arc_reduce_target_size() call
#14641 Additional limits on hole reporting
#14649 Drop lying to the compiler in the fletcher4 code
#14652 panic loop when removing slog device
#14653 Update vdev state for spare vdev
#14655 Fix cloning into already dirty dbufs
#14678 Revert "Do not hold spa_config in ZIL while blocked on IO"
Obtained from: OpenZFS
OpenZFS commit: 431083f75b
This entails:
- Marking some obvious candidates for __nosanitizeaddress
- Similar trap frame markings as amd64, for similar reasons
- Shadow map implementation
The shadow map implementation is roughly similar to what was done on
amd64, with some exceptions. Attempting to use available space at
preinit_map_va + PMAP_PREINIT_MAPPING_SIZE (up to the end of that range,
as depicted in the physmap) results in odd failures, so we instead
search the physmap for free regions that we can carve out, fragmenting
the shadow map as necessary to try and fit as much as we need for the
initial kernel map. pmap_bootstrap_san() is thus after
pmap_bootstrap(), which still included some technically reserved areas
of the memory map that needed to be included in the DMAP.
The odd failure noted above may be a bug, but I haven't investigated it
all that much.
Initial work by mhorne with additional fixes from kevans and markj.
Reviewed by: andrew, markj
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D36701
This makes the detection of VMs common between platforms that
have SMBios.
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D38800
Notable changes include:
- DSCP QoS Support (leveraging support added in
rG9c950139051298831ce19d01ea5fb33ec6ea7f89)
- Improved PFC handling and TC queue assignments (now all remaining
queues are assigned to TC 0 when more than one TC is enabled and the
number of available queues does not evenly divide between them)
- Support for dumping the internal FW state for additional debugging by
Intel support
- Support for allowing "No FEC" to be a valid state for the LESM to
negotiate when using non-standard compliant modules
Also includes various bug fixes and smaller enhancements, too.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: erj@
Tested by: Jeff Pieper <jeffrey.pieper@intel.com>
MFC after: 3 days
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D38109
This updated DDP is intended to be used with the forthcoming ice(4)
driver update to 1.37.7-k. (But it will still work with the current
version.)
Co-authored-by: Piotr Kubaj <pkubaj@FreeBSD.org>
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
MFC after: 1 week
Sponsored by: Intel Corporation
The SCMI specification describes a set of standard interfaces for power,
performance and system management.
SCMI is extensible and provides interfaces to access functions which are
often implemented in firmwares in the System Control Processor (SCP).
This implements Shared Memory-based transfer, which is one of the ways on
how messages are exchanged between agents and the platform.
This includes a driver for ARM Message Handling Unit (MHU) Doorbell, which
is a mechanism that the caller can use to alert the callee of the presence
of a message.
The support implements clock management interface. For instance this allows
us to control HDMI pixel clock on ARM Morello Board.
Tested on ARM Morello Board.
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D37316
Reviewed by: manu
Sponsored by: UKRI
These were originally in locore.S as they are only needed so we have
a valid value to put into the vbar_el2 register. As these will soon
be used by bhyve so move them to a new file as we already have with
the EL1 exception vectors in exception.S.
Obtained from: https://github.com/FreeBSD-UPB/freebsd-src (earlier version)
Sponsored by: Innovate UK
Sponsored by: The FreeBSD Foundation
This is only ever used by a FDT specific attachment and calls into
FDT specific functions. Only build it when FDT is in the kernel config.
Sponsored by: The FreeBSD Foundation
This is the last part for ARM64 Hyper-V enablement. This includes
commone files and make file changes to enable the ARM64 FreeBSD
guest on Hyper-V. With this patch, it should be able to build
the ARM64 image and install it on Hyper-V.
Reviewed by: emaste, andrew, whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D36744
DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate DPAA2 objects), Wire Rate I/O
processor (WRIOP, packets distribution, queuing, drop decisions),
Queues and Buffers Manager (QBMan, Rx/Tx queues control, Rx buffer
pools) and the others.
The Management Complex runs NXP-supplied firmware which provides DPAA2
objects as an abstraction layer over those blocks to simplify an
access to the underlying hardware. Each DPAA2 object has its own
driver (to perform an initialization at least) and will be visible
as a separate device in the device tree.
Two new drivers (dpaa2_mc and dpaa2_rc) act like firmware buses in
order to form a hierarchy of the DPAA2 devices:
acpiX (or simplebusX)
dpaa2_mcX
dpaa2_rcX
dpaa2_mcp0
...
dpaa2_mcpN
dpaa2_bpX
dpaa2_macX
dpaa2_io0
...
dpaa2_ioM
dpaa2_niX
dpaa2_mc is suppossed to be a root of the hierarchy, comes in ACPI
and FDT flavours and implements helper interfaces to allocate and
assign bus resources, MSI and "managed" DPAA2 devices (NXP treats some
of the objects as resources for the other DPAA2 objects to let them
function properly). Almost all of the DPAA2 objects are assigned to
the resource containers (dpaa2_rc) to implement isolation.
The initial implementation focuses on the DPAA2 network interface
to be operational. It is the most complex object in terms of
dependencies which uses I/O objects to transmit/receive packets.
Approved by: bz (mentor)
Tested by: manu, bz
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D36638
coresight_cpu_debug only has an FDT attachment, so let's not build it
for kernels without FDT.
coresight.h includes sys/malloc.h via header pollution
dev/ofw/openfirm.h; include it directly in case we're building without
FDT.
Reviewed by: andrew, manu
Differential Revision: https://reviews.freebsd.org/D36789
Bring in the latest Arm Optimized Routines memcpy/memmove into the
arm64 kernel. As these functions have been merged in the current
version remove the now unneeded memmove.S.
Sponsored by: The FreeBSD Foundation
Split the current FDT-only implementation up into an FDT and an
ACPI part reusing and sharing as much code as possible (thanks mw!).
This makes the Synopsis XHCI root hubs attach correctly on SolidRun's
HoenyComb instead of just the generic XHCI root and this means we
are also doing proper chip setup and applying the quirk needed there [1].
There is one problem with ACPI attachment in that it uses the generic
XHCI PNP ID. So we need to do extra checks in order to not claim
all xhci, which means we check for a known quirk to be present
in acpi_probe. Long term this isn't scaling and this was discussed
in SolidRun's Discord Channel in 2021 with the intend that "jnettlet"
will take this to a steering committee. Since then ACPI has kind-of
become a technology non grata (due to not getting changes into Linux
timely) so it is unclear if this will ever happen. If there will be
further hardware with dwc3/ACPI we should go and make sure this problem
gets solved.
[1] 24698f90b7/Silicon/NXP/LX2160A/AcpiTables/Dsdt/Usb.asl
Reviewed by: manu, mw
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D32256
Add a driver for NXP LS1088a clockgen support which passes
configuration information to QorIQ clockgen class.
The implementaiton started off as copy of ls1028 support and was
adjusted accordingly.
Reviewed by: dgr_semihalf.com (earlier), mmel
MFC after: 1 week
Sponsored by: Traverse Technologies (providing Ten64 HW for testing)
Differential Revision: https://reviews.freebsd.org/D35617
Fix builds after 1459a22787 and
59191f3573 by using __diagused
for variables only used in KASSERT().
In addition remove two debug lines that look like a copy and paste error
from dmc620 to cmn600.
Further add the newly introduced files to sys/confg/files.arm64 as well
so that LINT compiles without missing symbols.
Remove -mgeneral-regs-only when building the arm64 blake3 code. It
uses simd instructions so will use non-general purpose registers.
Sponsored by: The FreeBSD Foundation
This allows the "irdma" driver to communicate with the ice(4)
driver to allow it access to the underlying device's hardware
resources as well as synchronize access to shared resources.
This interface already existed in the standalone out-of-tree
1.34.2 driver; this commit adds and enables it in the in-kernel
driver.
Note:
Adds hack to module Makefile to compile interface/.m files
These are required for the RDMA client interface, but they don't
build as-is like the normal .c files. The source directory doesn't
seem to be included by default, so add lines that specifically
add them as libraries so that ice_rdma.h can be found and the
interface files will compile.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D30889
As with atomic(9) use the ARMv8.1 Large System Extension atomic
instructions to implement the userspace compare and swap functions.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35234