Compared to __member2struct(), this macro has the following advantages:
- It ensures that the type of the pointer is compatible with the member
field of the structure (or a void pointer).
- It works properly in combination with volatile and const, though
unfortunately it drops these qualifiers from the returned value.
mdf@ proposed to add the container_of() macro, just like Linux has.
Eventually I decided against this, as <sys/param.h> is included all over
the place. It seems container_of() on Linux is specific to the kernel,
not userspace. I'd rather not pollute userspace with this.
I also thought about adding __container_of(), but this would have two
advantages. Xorg seems to already have a __container_of(), which is not
compatible with this version. Also, the underscore in the middle
conflicts with our existing macros (__offsetof, __rangeof, etc).
I'm changing member2struct() to use its old code, as the extra
strictness of this new macro conflicts with existing code (read: cxgb).
MFC after: 1 month
No, this isn't HT/5 and HT/10 support. This is the 11a half/quarter
rate support primarily used by the 4.9GHz and GSM band regulatory
domains.
This is definitely a work in progress.
TODO:
* everything in the last commit;
* lots more interoperability testing with the AR5212 half/quarter rate
support for the relevant chips;
* Do some interop testing on half/quarter rate support between _all_
the 11n chips - AR5416, AR9160, AR9280 (and AR9285/AR9287 when 2GHz
half/quarter rate support is coded up.)
used when running the chips in half/quarter rate.
This sets up some default parameters which are then overridden by the
driver (which manually configures things like slot timing at interface
start time.)
Although this is a copy-and-modify from the AR5212 HAL, I did peek
at the reference HAL and the ath9k driver to see what they did.
Ath9k in particular doesn't hard-code this - instead, their version
of ar5416InitUserSettings() does all of the relevant math.
TODO:
* do the math, not hard code things!
* fix the mac clock calculation for the AR9287; since it runs the
MAC clock at a higher rate, requiring all the duration calculations
to change;
* Do a whole lot more validation for half/quarter rates.
Obtained from: Qualcomm Atheros, Linux ath9k
Some of the math is a little wrong thanks to clocks in 11a mode running
at 44MHz when in fast clock mode (rather than 40MHz, which the chips
before AR9280 ran 11a in). That'll have to be addressed in a future commit.
This fixes the incorrect slot (and likely ACK/RTS timeout) values
which I see when enabling half/quarter rate support on the AR9280.
The resulting math matches the expected calculated default values.
The prev-pointers point to the next-pointers of the previous element --
not the ENTRY structure. The next-pointers are stored in the ENTRY
structures first, so the code would already work correctly. Still, it is
more accurate to use the next-fields.
To prevent misuse of __member2struct() in the future, I've got a patch
that requires the pointer to be passed to this macro to be compatible
with the member of the structure. I'll commit this patch after I've
tested it properly.
MFC after: 1 month.
Idle threads are not allowed to acquire any lock but spinlocks.
Deny any attempt to do so by panicing at the locking operation
when INVARIANTS is on. Then, remove the check on blocking on a
turnstile.
The check in sleepqueues is left because they are not allowed to use
tsleep() either which could happen still.
Reviewed by: bde, jhb, kib
MFC after: 1 week
with TDP_NOSLEEPING on.
The current message has no informations on the thread and wchan
involed, which may be useful in case where dumps have mangled dwarf
informations.
Reported by: kib
Reviewed by: bde, jhb, kib
MFC after: 1 week
Regular LISTs have been implemented in such a way that the prev-pointer
does not point to the previous element, but to the next-pointer stored
in the previous element. This is done to simplify LIST_REMOVE(). This
macro can be implemented without knowing the address of the list head.
Unfortunately this makes it harder to implement LIST_PREV(), which is
why this macro was never here. Still, it is possible to implement this
macro. If the prev-pointer points to the list head, we return NULL.
Otherwise we simply subtract the offset of the prev-pointer within the
structure.
It's not as efficient as traversing forward of course, but in practice
it shouldn't be that bad. In almost all use cases, people will want to
compare the value returned by LIST_PREV() against NULL, so an optimizing
compiler will not emit code that does more branching than TAILQs.
While there, make the code a bit more readable by introducing
__member2struct(). This makes STAILQ_LAST() far more readable.
MFC after: 1 month
with no output. Add "echo" at the end these shell commands whose output is
assigned to a variable's value to ensure there is some output.
Submitted by: John Van Horne <jvanhorne@juniper.net>
of the DWC OTG is very simple in PIO mode, and we need to re-transmit
data when NAK is received among other things. We probably will need
to implement some kind of rate limitation on the NAK-ing.
bytes syncronized.
The rationale behind this is the following: for large disks the
percent synchronisation counter ticks too seldom, and monitoring
software (as well as human operator) can't tell whether
synchronisation goes on or one of disks got stuck. On an idle
server one can look into gstat and see whether synchronisation goes
on or not, but on a busy server that won't work. Also, new value
monitored can be differentiated obtaining the synchronisation speed
quite precisely.
Submitted by: Konstantin Kukushkin <dark ramtel.ru>
Reviewed by: pjd
The previous one was totally bogus as it used hash value of
_output_ variable as an index for searching...
The only reliable way to do a reverse lookup here is to iterate
over all entries.
MFC after: 15 days
- skip length_idx index for a replaced variable-sized attribute
- skip length_idx index for a removed variable-sized attribute
- also re-arranged code to make sure that length_idx is always
incremented for variable-sized attributes
- additionally add an assertion that the number of actually produced
attributes is the same as the expected number of resulting
attributes
In cooperation with: Matthew Ahrens <mahrens@delphix.com>
Tested by: Trent Nelson <trent@snakebite.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> (for upstream)
To do: get this upstreamed
MFC after: 2 weeks
libstand(3) tries to detect file system in the predefined order,
but zfsloader usually is used for the booting from ZFS, and there is
no need to try detect several file system types for each open() call.
drivers:
- Remove scsi_low_pisa.*, they were unused.
- Remove <compat/netbsd/physio_proc.h> and calls to the stubs in that
header. They were empty nops.
- Retire sl_xname and use device_get_nameunit() and device_printf() with
the underlying device_t instead.
- Remove unused {ct,ncv,nsp,stg}print() functions.
- Remove empty SOFT_INTR_REQUIRED() macro and the unused sl_irq member.
to this pmap.
Revise some comments.
The file vm/vm_param.h includes the file machine/vmparam.h, so there is no
need to directly include it.
Tested by: andrew
pmap_unmapdev()'s own direct efforts to destroy the page table entries are
redundant, so eliminate them.
Don't set PTE_W on the page table entry in pmap_kenter{,_attr}() on MIPS.
Setting PTE_W on MIPS is inconsistent with the implementation of this
function on other architectures. Moreover, PTE_W should not be set, unless
the pmap's wired mapping count is incremented, which pmap_kenter{,_attr}()
doesn't do.
MFC after: 10 days
Use it for a printf() that can be harmlessly generated for mmap()'d
files. It will be used extensively for the NFSv4.1 client.
Debugging printf()s are enabled by setting vfs.nfs.debuglevel to
a non-zero value. The higher the value, the more debugging printf()s.
Reviewed by: jhb
MFC after: 2 weeks
(1022) in HPET. But according to report they still haven't fixed problem
with level-triggered interrupts.
Make workaround used for earlier chipsets apply to this new ID also.
PR: amd64/171355
MFC after: 3 days
it. There are two problems which shall be addressed for shared
lookups use to have measurable effect on nullfs scalability:
1. When vfs_lookup() calls VOP_LOOKUP() for nullfs, which passes lookup
operation to lower fs, resulting vnode is often only shared-locked. Then
null_nodeget() cannot instantiate covering vnode for lower vnode, since
insmntque1() and null_hashins() require exclusive lock on the lower.
Change the assert that lower vnode is exclusively locked to only
require any lock. If null hash failed to find pre-existing nullfs
vnode for lower vnode and the vnode is shared-locked, the lower vnode
lock is upgraded.
2. Nullfs reclaims its vnodes on deactivation. This is due to nullfs
inability to detect reclamation of the lower vnode. Reclamation of a
nullfs vnode at deactivation time prevents a reference to the lower
vnode to become stale.
Change nullfs VOP_INACTIVE to not reclaim the vnode, instead use the
VFS_RECLAIM_LOWERVP to get notification and reclaim upper vnode
together with the reclamation of the lower vnode.
Note that nullfs reclamation procedure calls vput() on the lowervp
vnode, temporary unlocking the vnode being reclaimed. This seems to be
fine for MPSAFE filesystems, but not-MPSAFE code often put partially
initialized vnode on some globally visible list, and later can decide
that half-constructed vnode is not needed. If nullfs mount is created
above such filesystem, then other threads might catch such not
properly initialized vnode. Instead of trying to overcome this case,
e.g. by recursing the lower vnode lock in null_reclaim_lowervp(), I
decided to rely on nearby removal of the support for non-MPSAFE
filesystems.
In collaboration with: pho
MFC after: 3 weeks
about vnode reclamation. Typical use is for the bypass mounts like
nullfs to get a notification about lower vnode going away.
Now, vgone() calls new VFS op vfs_reclaim_lowervp() with an argument
lowervp which is reclaimed. It is possible to register several
reclamation event listeners, to correctly handle the case of several
nullfs mounts over the same directory.
For the filesystem not having nullfs mounts over it, the overhead
added is a single mount interlock lock/unlock in the vnode reclamation
path.
In collaboration with: pho
MFC after: 3 weeks
lookup code that dotdot lookups shall override any shared lock
requests with the exclusive one. The flag is useful for filesystems
which sometimes need to upgrade shared lock to exclusive inside the
VOP_LOOKUP or later, which cannot be done safely for dotdot, due to
dvp also locked and causing LOR.
In collaboration with: pho
MFC after: 3 weeks
The DWC OTG host mode support should still be considered
experimental. Isochronous support for DWC OTG is not
fully implemented. Some code added derives from
Aleksandr Rybalko's dotg.c driver.
ath_buf and when forming a non-aggregate frame.
The non-11n setds function is called when TXing aggregate frames (and
yes, I should fix this!) and the non-11n TX aggregation code doesn't clear
the delimiter field. I figure it's nicer to do that.
TDP_NOSLEEPING leaking from syscallret() to userret() so that also
trap handling is covered. Also, the check on td_locks is not duplicated
between the two functions.
Reported by: avg
Reviewed by: kib
MFC after: 1 week
Avoid re-walking the page table from the root for every PTE examined.
Tidy up some of pmap_remove()'s helper functions.
pmap_enter:
Set PV_TABLE_REF whenever the physical page being mapped is managed, not
just when it is writeable.
Only call pmap_update_page() when the old mapping was valid. If there was
no prior valid mapping, then pmap_update_page() serves no useful purpose.
However, it will interrupt every processor that has the pmap active.
pmap_enter_quick_locked:
Always set PTE_RO.
pmap_emulate_modified:
Don't set PV_TABLE_REF.
Eliminate a nonsensical comment.
This had the side effect of clearing HAL_TXDESC_CLRDMASK for a bunch of
frames, meaning they'd end up being potentially filtered if there were
an error. This is fine in the previous world as they'd just be
software retried but now that I'm working on filtered frames, these
descriptors would be endlessly retried until another valid frame would
come along that had CLRDMASK set.
do a BUS_DMASYNC_POSTWRITE over the DMA map. The way it currently is would
only do POSTREAD for read transactions.
Submitted by: Sascha Wildner
MFC after: 1 month
with the correct configuration.
Occasionally an aggregate TX would fail and the first frame would be
retransmitted as a non-AMPDU frame. Since bfs_aggr=1 and bfs_nframes > 1
(from the previous AMPDU attempt), the aggr completion function would be
called and be very confused about what's going on.
Noticed by: Kim <w8hdkim@gmail.com>
PR: kern/171394
allocating them on the stack of various bus_dmamap_load*() functions. The
S/G lists are stored in the DMA tags. This matches the implementation on
all other platforms.
Discussed with: scottl, gibbs
Tested by: stas (arm@)
NetBSD/pc98 was never merged into the main NetBSD tree and is no longer
developed. Adding locking to these drivers would have made the compat
shims hard to impossible to maintain, so remove the shims to ease
future changes.
These changes were verified by md5. Some additional shims can be removed
that do affect the compiled results that I will probably do in another
round.
Approved by: nyan (tentatively)
pmap_get_pv_entry(). In fact, some callers already held it around calls.
(In earlier versions, the same statements would apply to the page queues
lock.)
While I'm here tidy up the style of a few nearby statements and revise
some comments.
Tested by: Ian Lepore
have been chosen based on the bit names in the PCI Express Base
Specification 3.0, and to match the predominant style of the existing
bit definitions.
MFC after: 1 week
twe_start() to simulate the behavior on 4.x where the driver dropped
spl to allow interrupts to run to free up space in the command
queue. Be careful to only poll if we are going to make at least
one more attempt to queue the current command. Also, when polling,
be careful to not call twe_startio() to queue more commands to avoid
recursion.
- Move the buffer for formatting AEN messages into the softc instead of
using a single driver-wide static buffer.
Requested by: scottl (1)
Tested by: Mike Tancsa @ Sentex
generator, found on IvyBridge and supposedly later CPUs, accessible
with RDRAND instruction.
From the Intel whitepapers and articles about Bull Mountain, it seems
that we do not need to perform post-processing of RDRAND results, like
AES-encryption of the data with random IV and keys, which was done for
Padlock. Intel claims that sanitization is performed in hardware.
Make both Padlock and Bull Mountain random generators support code
covered by kernel config options, for the benefit of people who prefer
minimal kernels. Also add the tunables to disable hardware generator
even if detected.
Reviewed by: markm, secteam (simon)
Tested by: bapt, Michael Moll <kvedulv@kvedulv.de>
MFC after: 3 weeks
comment describing them. Both the function names and the comment had grown
stale. Quite some time has passed since these pmap implementations last
used the page's hold count to track the number of valid mapping within a
page table page. Also, returning TRUE from pmap_unwire_ptp() rather than
_pmap_unwire_ptp() eliminates a few instructions from callers like
pmap_enter_quick_locked() where pmap_unwire_ptp()'s return value is used
directly by a conditional statement.
Merge ether_ipfw_chk() and part of bridge_pfil() into
unified ipfw_check_frame() function called by PFIL.
This change was suggested by rwatson? @ DevSummit.
Remove ipfw headers from ether/bridge code since they are unneeded now.
Note this thange introduce some (temporary) performance penalty since
PFIL read lock has to be acquired for every link-level packet.
MFC after: 3 weeks
- Move mwlfw from {amd64,i386}/conf/NOTES to sys/conf/NOTES (mwl(4) is
already present in sys/conf/NOTES).
- Remove duplicate mwl(4) entries from {amd64,i386}/conf/NOTES.
- While here, add a description to the sfxge line in amd64/conf/NOTES.
- Provide missing function that can do hashing of arbitrary sized buffer.
- Refetch lookup3.c and do only minimal edits to it, so that diff between
our jenkins_hash.c and lookup3.c is minimal.
- Add declarations for jenkins_hash(), jenkins_hash32() to sys/hash.h.
- Document these functions in hash(9)
Obtained from: http://burtleburtle.net/bob/c/lookup3.c
with multicast bit set. FreeBSD refuses to install such
entries since 9.0, and this broke installations running
Microsoft NLB, which are violating standards.
Tested by: Tarasov Oleg <oleg_tarasov sg-tea.com>
0 - loader hints in environment only;
1 - static hints only
2 - fallback mode (Dynamic KENV with fallback to kernel environment)
Add kern.hintmode write handler, accept only value 2. That will switch
static KENV to dynamic. So it will be possible to change device hints.
Approved by: adrian (mentor)
C++ mangling will cause trouble with variables like __rpc_xdr
in xdr.h so rename this to XDR.
While here add proper C++ guards to RPC headers.
PR: 137443
MFC after: 2 weeks
warnings in sys/gnu/fs/xfs. The only warnings that still need to be
suppressed are those about array bound overruns of flexible array
members in xfs_dir2_{block,sf}.c, which are too expensive (in terms of
cascading code changes) to fix.
MFC after: 1 week
X-MFC-With: r239959
MSG_WAITALL is set, and it is possible to do the entire receive
operation at once if we block (resid <= hiwat). Actually it might make
the recv(2) with MSG_WAITALL flag get stuck when there is enough space
in the receiver buffer to satisfy the request but not enough to open
the window closed previously due to the buffer being full.
The issue can be reproduced using the following scenario:
On the sender side do 2 send(2) requests:
1) data of size much smaller than SOBUF_SIZE (e.g. SOBUF_SIZE / 10);
2) data of size equal to SOBUF_SIZE.
On the receiver side do 2 recv(2) requests with MSG_WAITALL flag set:
1) recv() data of SOBUF_SIZE / 10 size;
2) recv() data of SOBUF_SIZE size;
We totally fill the receiver buffer with one SOBUF_SIZE/10 size request
and partial SOBUF_SIZE request. When the first request is processed we
get SOBUF_SIZE/10 free space. It is just enough to receive the rest of
bytes for the second request, and soreceive_generic() blocks in the
part that is a subject of this change waiting for the rest. But the
window was closed when the buffer was filled and to avoid silly window
syndrome it opens only when available space is larger than sb_hiwat/4
or maxseg. So it is stuck and pending data is only sent via TCP window
probes.
Discussed with: kib (long ago)
MFC after: 2 weeks
check it for MT_CONTROL type too, otherwise the assertion
"m->m_type == MT_DATA" below may be triggered by the following scenario:
- the sender sends some data (MT_DATA) and then a file descriptor
(MT_CONTROL);
- the receiver calls recv(2) with a MSG_WAITALL asking for data larger
than the receive buffer (uio_resid > hiwat).
MFC after: 2 week
Fix the strong signal diversity capability setting - I had totally
messed up the indentation.
Set the default values to match what's in the .ini for now, rather than
what values I had previously gleaned from places. This seems to work
quite well for the early AR5212 NICs I have. Of course, later NICs
have different PHYs and the radar configuration is very card/board
dependent..
Tested:
* ath1: AR5212 mac 5.3 RF5111 phy 4.1
ath1: 2GHz radio: 0x0023; 5GHz radio: 0x0017
This detects 1, 5, 25, 50, 75, 100uS pulses reliably (with no interference.)
However, 10uS pulses don't detect reliably. That may be around the
transition between short and long pulses so some further tuning may
improve things.
1. Process A pdfork(2)s process B.
2. Process A passes process descriptor of B to unrelated process C.
3. Hit CTRL+C to terminate process A. Process B is also terminated
with SIGINT.
4. init(8) collects status of process B.
5. Process C closes process descriptor associated with process B.
When we have such order of events, init(8), by collecting status of
process B, will call procdesc_reap(). This function sets pd_proc to NULL.
Now when process C calls close on this process descriptor,
procdesc_close() is called. Unfortunately procdesc_close() assumes that
pd_proc points at a valid proc structure, but it was set to NULL earlier,
so the kernel panics.
The patch also adds setting 'p->p_procdesc' to NULL in procdesc_reap(),
which I think should be done.
MFC after: 1 week
up on (at least) the AR5413.
The 30 second summary - if a CRC error frame comes in during PHY error
processing, that CRC bit will be set for all subsequent frames until
a non-CRC error frame is processed.
So to allow for accurate PHY error processing (Radar, and ANI on the AR5212
HAL chips) just tag the frame as being both CRC and PHY - let the driver
decide what to do with it.
PR: kern/169362
We especifically ignored the glibc compatibility changes
but this should help interaction with Solaris and Linux.
____
Fixed infinite loop in svc_run()
author Steve Dickson
Tue, 10 Jun 2008 12:35:52 -0500 (13:35 -0400)
Fixed infinite loop in svc_run()
____
__rpc_taddr2uaddr_af() assumes the netbuf to always have a
non-zero data. This is a bad assumption and can lead to a
seg-fault. This patch adds a check for zero length and returns
NULL when found.
author Steve Dickson
Mon, 27 Oct 2008 11:46:54 -0500 (12:46 -0400)
____
Changed clnt_spcreateerror() to return clearer
and more concise error messages.
author Steve Dickson
Thu, 20 Nov 2008 08:55:31 -0500 (08:55 -0500)
____
Converted all uid and gid variables of the type uid_t and gid_t.
author Steve Dickson
Wed, 28 Jan 2009 12:44:46 -0500 (12:44 -0500)
____
libtirpc: set r_netid and r_owner in __rpcb_findaddr_timed
These fields in the rpcbind GETADDR call are being passed uninitialized
to CLNT_CALL. In the case of x86_64 at least, this usually leads to a
segfault. On x86, it sometimes causes segfaults and other times causes
garbage to be sent on the wire.
rpcbind generally ignores the r_owner field for calls that come in over
the wire, so it really doesn't matter what we send in that slot. We just
need to send something. The reference implementation from Sun seems to
send a blank string. Have ours follow suit.
author Jeff Layton
Fri, 13 Mar 2009 11:44:16 -0500 (12:44 -0400)
____
libtirpc: be sure to free cl_netid and cl_tp
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the same
way.
author Jeff Layton
Fri, 13 Mar 2009 11:47:36 -0500 (12:47 -0400)
Obtained from: Bull GNU/Linux NFSv4 Project
MFC after: 3 weeks
linking it statically into the kernel. With our gcc in base there are
no warnings, so also remove the WERROR= from the module makefile.
Noted by: Eir Nym <eirnym@gmail.com>
MFC after: 1 week
firmware objects by adding --no-warn-mismatch to the linker flags,
add --no-warn-mismatch when linking firmware objects (*.fwo) as
well as to the link of the main kernel file. This permits firmware
modules to be statically linked into an ia64 kernel.
uudecode, and NORMAL_FWO to use ld to build the .fwo file) and use those
instead of explicit ld/uudecode invocations in sys/conf/files. Apart from
increasing readability, this makes it possible to adjust the flags used for
firmware objects in one place.
MFC after: 2 weeks
this case, allocate a plain mbuf and copy the frame into it, then send the
copy up the stack, leaving the original mbuf+cluster in place in the
receive ring for immediate re-use. This saves a trip through 2 of the
3 zones of the compound mbuf allocator, a trip through busdma, and a trip
through the 1 of the 3 mbuf destructors. For our load at Netflix, this can
lower CPU consumption by as much as 20%. The copy algorithm is based on
investigative work from Luigi Rizzo earlier in the year.
Reviewed by: jfv
Obtained from: Netflix
handler and not more statically.
Unfortunately, it seems that this is not ideal for new platform bringup
and boot low level development (which needs ktr_cpumask to be effective
before tunables can be setup).
Because of this, add a way to statically initialize cpusets, by passing
an list of initializers, divided by commas. Also, provide a way to enforce
an all-set mask, for above mentioned initializers.
This imposes some differences on how KTR_CPUMASK is setup now as a
kernel option, and in particular this makes the words specifications
backward wrt. what is currently in -CURRENT. In order to avoid mismatches
between KTR_CPUMASK definition and other way to setup the mask
(tunable, sysctl) and to print it, change the ordering how
cpusetobj_print() and cpusetobj_scan() acquire the words belonging
to the set.
Please give a look to sys/conf/NOTES in order to understand how the
new format is supposed to work.
Also, ktr manpages will be updated shortly by gjb which volountereed
for this.
This patch won't be merged because it changes a POLA (at least
from the theoretical standpoint) and this is however a patch that
proves to be effective only in development environments.
Requested by: rpaulo
Reviewed by: jeff, rpaulo
the interface is brought up. Without this, the boot time interrupt
round-robin assignment does not think the allocated interrupt resources
are active and leaves them assigned to CPU 0.
While here, add descriptive tags to each interrupt handler when MSI-X
is used.
Reviewed by: np
MFC after: 1 week
- In the !wildcard case, return ENOSPC instead of confusing EEXIST
in case if ifc->ifc_maxunit reached.
- Fix unit leak, that I've introduced in previous revision.
Submitted by: Daan Vreeken <Daan vitsch.nl>
some HAL definitions rather than local definitions.
The original source (ath9k) pulled this stuff from the QCA driver and
removed the HAL_* prefix. I'm just restoring the correct order of things.
Obtained from: Qualcomm Atheros
This routine is intended only for commands such as INQUIRY where
the controller may fill out a smaller amount of data than allocated
by the host.
The end result of this bug was that isci(4) would report non-zero
resid for successful SCSI_UNMAP commands.
Sponsored by: Intel
MFC after: 3 days
* add cam as a module to build - but build in scbus/da for now, as
"cam" as a module includes all cam devices. Hardly space saving.
* Don't build FFS snapshot support.
Specifying no argument is undocumented in the gas manual, and clang's
integrated assembler refuses to parse it. Also, removing it causes no
change at all in the resulting object file.
MFC after: 1 week
In fact, bus_dmamem_alloc() happily NULLs the dmat pointer passed in,
before replacing it with its own.
This fixes a MIPS crash when kldload'ing if_ath/if_ath_pci -
bus_dmamap_destroy() was passed in a NULL dmat pointer and was doing
all kinds of very bad things.
Reviewed by: scottl
other CPUs doesn't require locking so get rid of it. As the latter is used
for the timecounter on certain machine models, using a spin lock in this
case can lead to a deadlock with the upcoming callout(9) rework.
- Merge r134227/r167250 from x86:
Avoid cross-IPI SMP deadlock by using the smp_ipi_mtx spin lock not only
for smp_rendezvous_cpus() but also for the MD cache invalidation and TLB
demapping IPIs.
- Mark some unused function arguments as such.
MFC after: 1 week
There are two consumers of vslock(9): sysctl code and drm driver. These
consumers are using locked memory as transient memory, it doesn't belong
to a process's memory.
Suggested by: avg
Reviewed by: alc
Approved by: kib (mentor)
MFC after: 2 weeks
o Disable multi-block operations: they sometimes fail.
o Don't use the PROOF bits yet: they hang the system hard.
o Disable the the multi-block operations for !rm9200, but it
still doesn't help.
o Fix writing < 12 bytes errata to actually work.
o Enable, for the moment, reporting extra bytes soaked up.
This is a re-implementation based on the reference carrier code
for the AR5413.
Tested:
* Pulse detection for AR5212 and AR5413, to ensure the
correct behaviour for both chips
PR: kern/170904
Obtained from: Qualcomm Atheros
This has an AR7240 SoC with an AR9285 wireless NIC on-board.
Since the kernel partition on the 4MiB flash is 960KiB, quite a bit
is disabled to try and squeeze the build into that. Even lzma'ed,
it's still quite large.
When calling a revoke(2) on a dtrace device, dtrace_close() could be
called, even if threads are still stuck in the device. Defer the actual
deallocation of datastructures to the cdevpriv destructor.
While there, remove the unneeded D_TRACKCLOSE and D_NEEDMINOR flags. For
the helper device, we never need it. For the regular dtrace devices, we
only need these flags on FreeBSD pre-8.
MFC after: 1 month