Commit Graph

74 Commits

Author SHA1 Message Date
Andrew Turner
e4c66ddabd Remove IPI_IRQ_START and IPI_IRQ_END from the arm kernel config files.
These are unneeded with INTRNG.
2018-07-28 06:46:10 +00:00
Emmanuel Vadot
74e0613ead dwmmc: Fully subclass driver
Fully subclass the dwmmc driver and split every driver into multiple files.

There is still a few quirks in the dwmmc driver that will need some work.

Tested On: Pine64 Rock64

Differential Revision:	https://reviews.freebsd.org/D13615
2017-12-30 22:01:17 +00:00
Ian Lepore
2d09b07279 Make kernel option KERNVIRTADDR optional, remove it from std.<platform>
files that can use the default value.

It used to be required that the low-order bits of KERNVIRTADDR matched
the low-order bits of the physical load address for all arm platforms.
That hasn't been a requirement for armv6 platforms since FreeBSD 10.
There is no longer any relationship between load addr and KERNVIRTADDR
except that both must be aligned to a 2 MiB boundary.

This change makes the default KERNVIRTADDR value 0xc0000000, and removes the
options from all the platforms that can use the default value.  The default
is now defined in vmparam.h, and that file is now included in a few new
places that reference KERNVIRTADDR, since it may not come in via the
forced-include of opt_global.h on the compile command line.
2017-12-30 00:20:49 +00:00
Emmanuel Vadot
ee070097f2 Revert r327250 as it broke the build for some armv6 kernel and all armv4/5
Reported by:	ian
2017-12-28 07:31:14 +00:00
Emmanuel Vadot
d06955f9bd arm: Add kern/kern_clocksource.c to files.arm
Instead of adding it to every files.vendor, add it to the common arch file.
2017-12-27 21:39:57 +00:00
Pedro F. Giffuni
af3dc4a7ca sys/arm: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:04:10 +00:00
Warner Losh
094fc1ed0f Tag all armv7 kernels as such in their machine config line.
Transition all boards that support arm cortex CPUs to armv7. This
leaves two armv6 kernels in the tree. RPI-B, which uses the BCM2835
which has a ARM1176 core, and VERSATILEPB, which is a qemu board setup
around the time RPI-B went in. Copy std.armv6 to std.armv7, even
though that duplicates a lot of stuff. More work needs to be done to
sort out the duplication.

Differential Revision: https://reviews.freebsd.org/D12027
2017-10-05 23:01:50 +00:00
Michal Meloun
93a065e749 Remake support for SMP kernel on UP cpu:
- Use new option SMP_ON_UP instead of (mis)using specific CPU type.
   By this, any SMP kernel can be compiled with SMP_ON_UP support.
 - Enable runtime detection of CPU multiprocessor extensions only
   if SMP_ON_UP option is used. In other cases (pure SMP or UP),
   statically compile only required variant.
 - Don't leak multiprocessor instructions to UP kernel.
 - Correctly handle data cache write back to point of unification.
   DCCMVAU is supported on all armv7 cpus.
 - For SMP_ON_UP kernels, detect proper TTB flags on runtime.

Differential Revision: https://reviews.freebsd.org/D9133
2017-02-02 06:14:44 +00:00
Andrew Turner
6c925b9c81 All armv6 platforms have the same implementation of platform_lastaddr.
Replace them with a default handler that returns devmap_lastaddr.

Reviewed by:	mmel
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D8806
2016-12-16 10:31:13 +00:00
Andrew Turner
59249a516a Add the missing void to function signatures in much of the arm code.
Sponsored by:	ABT Systems Ltd
2016-12-13 13:43:22 +00:00
Andrew Turner
3f31908a97 Use platform_*_t to check the platform function signatures are correct in
the Rockchip platform code and correct the one place they differ.

Sponsored by:	ABT Systems Ltd
2016-12-13 13:07:17 +00:00
Ganbold Tsagaankhuu
a89938019a Switch Rockchip RK3188 SoC to use the platform code.
Reviewed by:	andrew, manu
Differential Revision:	https://reviews.freebsd.org/D8769
2016-12-13 11:43:46 +00:00
Andrew Turner
9783ea5c9f Use the correct OF_getencprop over OF_getprop + fdt32_to_cpu to read
integer data from the device tree.

Sponsored by:	ABT Systems Ltd
2016-11-14 12:03:08 +00:00
Andrew Turner
df7675353e Stop including fdt_common.h from the arm code when it's unneeded.
Sponsored by:	ABT Systems Ltd
2016-11-14 11:41:22 +00:00
Andrew Turner
87acb7f815 Use the modern spelling of ofw_bus_node_is_compatible in sys/arm.
Sponsored by:	ABT Systems Ltd
2016-11-11 15:13:30 +00:00
Andrew Turner
639e990770 Remove more unneeded users of the fdt_pic_decode_t table.
Sponsored by:	ABT Systems Ltd
2016-11-11 14:22:35 +00:00
Michal Meloun
c7264b2dfa ARM: Remove unused includes.
MFC after: 1 week
2016-10-09 10:25:47 +00:00
Michal Meloun
7cc70732a3 ARM: SEV/WFE instructions are implemented starting from ARMv6K,
use it directly.

MFC after: 1 week
2016-10-06 13:18:18 +00:00
Andrew Turner
1834282de6 Split CPU_CORTEXA into CPU_CORTEXA8, for the Cortex-A8, and CPU_CORTEXA_MP,
for later Cortex-A CPUs that support the Multiprocessor Extensions. This
will be needed to support both in a single GENERIC kernel while still
being able to only build for a single SoC.

Reviewed by:	mmel
Relnotes:	yes
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D8138
2016-10-04 12:25:44 +00:00
Andrew Turner
0a4c0732a9 Restrict where we need to define fdt_fixup_table to just PowerPC and
Marvell.

Sponsored by:	ABT Systems Ltd
2016-09-23 14:11:23 +00:00
Andrew Turner
c35b5d8372 Remove bus_dma_get_range and bus_dma_get_range_nb on armv6. We only need
this on a few earlier arm SoCs.

Reviewed by:	manu (earlier version)
Sponsored by:	ABT Systems Ltd
2016-09-23 12:38:05 +00:00
Ruslan Bukin
30b72b6871 Move arm's devmap to some generic place, so it can be used
by other architectures.

Reviewed by:	imp
Differential Revision:	https://reviews.freebsd.org/D6091
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-04-26 11:53:37 +00:00
Andrew Turner
59c3cb81c1 Rename ARM_INTRNG and MIPS_INTRNG to INTRNG. This will help with machine
independent code that needs to know about INTRNG such as PCI drivers.

Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
2016-04-15 16:05:41 +00:00
Andrew Turner
7133fe0f33 Almost all copies of platform_mp_init_secondary just called
intr_pic_init_secondary. Replace them with a direct call. On BCM2836
and ARMADA XP we need to add this function, but it can be empty.

Reviewed by:	ian, imp
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D5460
2016-02-26 16:04:47 +00:00
Andrew Turner
3210b87554 Remove platform_mp_probe as it's almost identical on most ARM SoCs, and
slightly wrong on the others. We should just check if mp_ncpus is set to
more than one CPU as we may wish to run on a single core even when SMP is
available.

Reviewed by:	ian
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D5458
2016-02-26 15:54:34 +00:00
Andrew Turner
243b36c321 Remove platform_ipi_send, it's an unneeded as all implementations are
identical.

Sponsored by:	 ABT Systems Ltd
2016-02-25 20:48:23 +00:00
Svatopluk Kraus
7758916f44 Move ARM_L2_PIPT option to std.armv6 for all armv6 platforms.
Only L2 PIPT cache is supported for __ARM_ARCH >= 6.

In fact, this is just a pure proclamation as this option is used
only in armv4 specific files now.
2016-02-22 11:47:28 +00:00
Andrew Turner
647a3bac7e Stop defining fdt_pic_table when building for ARM_INTRNG. 2016-02-11 11:49:27 +00:00
Michal Meloun
a89156f53f ARM: Use new ARMv6 naming conventions for cache and TLB functions
in all but ARMv4 specific files.
Expand ARMv6 compatibility stubs in cpu-v4.h. Use physical address
in L2 cache functions if ARM_L2_PIPT is defined.
2016-02-05 14:57:41 +00:00
Adrian Chadd
2b3ad18853 [intrng] Migrate the intrng code from sys/arm/arm to sys/kern/subr_intr.c.
The ci20 port (by kan@) is going to reuse almost all of the intrng code
since the SoC in question looks suspiciously like someone took an ARM
SoC design and replaced the ARM core with a MIPS core.

* migrate out the code;
* rename ARM_ -> INTR_;
* rename arm_ -> intr_;
* move the interrupt flush routine from intr.c / intrng.c into
  arm/machdep_intr.c - removing the code duplication and removing
  the ARM specific bits from here.

Thanks to the Star Wars: The Force Awakens premiere line for allowing
me a couple hours of quiet time to finish the universe builds.

Tested:

* make universe

TODO:

* The structure definitions in subr_intr.c still includes machine/intr.h
  which requires one duplicates all of the intrng definitions in
  the platform code (which kan has done, and I think we don't have to.)

  Instead I should break out the generic things (function declarations,
  common intr structures, etc) into a separate header.

* Kan has requested I make the PIC based IPI stuff optional.
2015-12-18 05:43:59 +00:00
Andrew Turner
ed18006cbf Create device options for the two common ARM timers.
Sponsored by:	ABT Systems Ltd
2015-11-21 16:23:56 +00:00
Andrew Turner
210d6af74d Move more bus_space_* files to be built by files.arm. This leaves the
definition in a file.* file under sys/arm/arm in the few cases we need it
for non-fdt platforms.

Sponsored by:	ABT Systems Ltd
2015-11-21 15:30:08 +00:00
Warner Losh
c192c5d300 Makeoption ARM_LITLE_ENDIAN does nothing. Remove it since it isn't
consistently used. It was a carry over from NetBSD that FreeBSD
doesn't use.
2015-11-20 21:49:46 +00:00
Andrew Turner
805471578e Remove bus_space_asm_generic.S from the per-SoC files.* files, it's already
in files.arm.

Sponsored by:	ABT Systems Ltd
2015-11-20 19:48:32 +00:00
Andrew Turner
aeef645f92 Stop setting {KERN,}PHYSADDR on armv6, it's unneeded.
Sponsored by:	ABT Systems Ltd
2015-11-20 16:12:22 +00:00
Ian Lepore
7ce00ee7b4 Rename arm_init_secondary_ic() -> arm_pic_init_secondary(). The latter is
the name the function will have when the new ARM_INTRNG code is integrated,
and doing this rename first will make it easier to toggle the new interrupt
handling code on/off with a config option for debugging.
2015-10-18 16:54:34 +00:00
Andrew Turner
ace157c3a9 Use the new gic option on all configs that need it. 2015-05-10 12:13:27 +00:00
Andrew Turner
087af50ab8 Include vm/pmap.h for pmap_kextract. 2015-04-04 23:03:11 +00:00
Andrew Turner
ff3b52bb19 Stop using machine/fdt.h in the arm kernel code when we don't need it. 2015-04-04 21:34:26 +00:00
Andrew Turner
0ebebb1260 Build the cpufunc_asm_* files based on the cpu type, not which config file
we happen to be building.
2015-03-29 22:43:39 +00:00
Andrew Turner
d9d02715d3 Remove cpufunc_asm_arm11.S from the ARMv7 configs, it's not used. 2015-03-29 21:45:28 +00:00
Andrew Turner
698234c19b Stop building unused cpuvunc_* files, we don't need anything from these. 2015-03-29 17:33:03 +00:00
Luiz Otavio O Souza
7836352b50 Implement GPIO_GET_BUS() method for all GPIO drivers.
Add helper routines to deal with attach and detach of gpiobus and gpioc
devices that are common to all drivers.
2015-01-31 19:32:14 +00:00
Luiz Otavio O Souza
876c1bd8b0 Clean up and fix the device detach routine and the failure path on GPIO
drivers.

This paves the way for upcoming work.
2015-01-31 12:17:07 +00:00
Ian Lepore
eb8711ce16 Rename bus_space-v6.c to bus_space_base.c, because it's not v6-specific
and now some v5 Marvell systems are using it.  Only define fdt_bus_tag
if option FDT is defined.
2015-01-21 03:44:29 +00:00
Ganbold Tsagaankhuu
e2763dca83 Enable Synopsys DesignWare Mobile Storage Host Controller
driver on Rockchip boards. It currently supports PIO mode
and dma mode needs external dma controller to be used.

Submitted by:   jmcneill
Approved by:    stas (mentor)
2015-01-20 09:07:28 +00:00
Andrew Turner
3f53a2d612 Rename gic_init_secondary to arm_init_secondary_ic to help with the merge
of the arm_intrng project branch.
2015-01-11 16:46:43 +00:00
Luiz Otavio O Souza
60245f5103 Fix the handling of pull-up and pull-down for RK3188.
For this to work the driver needs to know the bank it has attached to since
the registers for the first 12 pins are at a different location.

Move the lock initialization to simplify the code.
2015-01-07 19:15:11 +00:00
Luiz Otavio O Souza
1c15a29600 Reduce the maximum number of pins for the Rockchip RK3188, this driver
isn't supposed to manage all the GPIO pins in the system from a single
instance, instead it will attach to each one of the four available GPIO
controllers and only deal with one bank at time (32 pins per bank).

Rework part of the driver to take advantage of that, this simplify the
code a lot.

Also fix a bug in rk30_gpio_get_function() which wouldn't return the
correct values.

While here fix a typo in register name.
2015-01-07 16:55:55 +00:00
Ian Lepore
67009184e3 Remove -Wa,-march=armv7a from arm kernel configs, it makes clang 3.5 sad
and apparently isn't needed now that we're using the integrated assembler.
2015-01-01 23:21:46 +00:00