Commit Graph

26 Commits

Author SHA1 Message Date
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Peter Wemm
4a54450a9d It would help if things that MUST be 32 bit aligned were really 32 bit
aligned.  If I recall correctly, this is to ensure apic_imen can be
accessed in a single bus cycle.  Also, use TEXT_ALIGN rather than a
.align 2 (which means 2 byte align on ELF and 4 byte align on a.out)
1999-08-25 23:42:02 +00:00
Bruce Evans
eec2e836e9 Go back to the old (icu.s rev.1.7 1993) way of keeping the AST-pending
bit separate from ipending, since this is simpler and/or necessary for
SMP and may even be better for UP.

Reviewed by:	alc, luoqi, tegge
1999-07-10 15:28:01 +00:00
Alan Cox
789fb7ccdc An SMP-specific change: Add the lock prefix to RMW operations
on ipending.
1999-07-03 06:33:48 +00:00
Tor Egge
c8464c3072 When trying to enable or disable an interrupt not described by the mp table,
just return instead of dereferencing a null pointer.
1999-04-10 19:22:17 +00:00
Tor Egge
572d053e17 Maintain a mapping from irq number to (ioapic number, int pin) tuple,
and use this when masking/unmasking interrupts.

Maintain a mapping from (iopaic number, int pin) tuple to irq number,
and use this when configuring devices and programming the ioapics.

Previous code assumed that irq number was equal to int pin number, and
that the ioapic number was 0.

Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
Bruce Evans
18c5a6c435 Implemented dynamic registration of software interrupt handlers. Not
used yet.

Use dummy SWI handlers to avoid some checks for null pointers.
1998-08-11 15:08:13 +00:00
Tor Egge
beede91e58 Mask the interrupt before setting the corresponding bit in ipending if
the interrupt is already active.
Don't use lock prefix for operations on ipending.
Always use lock prefix for operations on iactive.
1998-04-22 22:49:29 +00:00
Tor Egge
5dd528cd4e Remove special handling for resuming clock interrupt when using APIC_IO.
The `generic' vector stubs do the right thing.
1998-03-05 21:45:53 +00:00
Tor Egge
02c1dc3bbc When entering the apic version of slow interrupt handler, level
interrupts are masked, and EOI is sent iff the corresponding ISR bit
is set in the local apic. If the CPU cannot obtain the interrupt
service lock (currently the global kernel lock) the interrupt is
forwarded to the CPU holding that lock.

Clock interrupts now have higher priority than other slow interrupts.
1998-03-03 22:56:30 +00:00
Tor Egge
5c623cb649 Add support for low resolution SMP kernel profiling.
- A nonprofiling version of s_lock (called s_lock_np) is used
    by mcount.

  - When profiling is active, more registers are clobbered in
    seemingly simple assembly routines. This means that some
    callers needed to save/restore extra registers.

  - The stack pointer must have space for a 'fake' return address
    in idle, to avoid stack underflow.
1997-12-15 02:18:35 +00:00
Steve Passe
20233f27f4 General cleanup of the lock pushdown code. They are grouped and enabled
from machine/smptests.h:

#define PUSHDOWN_LEVEL_1
#define PUSHDOWN_LEVEL_2
#define PUSHDOWN_LEVEL_3
#define PUSHDOWN_LEVEL_4_NOT
1997-09-07 22:04:09 +00:00
Steve Passe
34162fc615 Support for the new FAST_HI algorithm, enabled.
Preliminary support for the INTR_SIMPLELOCK algorithm, disabled.
Note that this code is NOT ready.
1997-08-29 18:45:23 +00:00
Steve Passe
886e789627 The last of the encapsolation of cpl/spl/ipending things into a critical
region protected by the simplelock 'cpl_lock'.

Notes:

 - this code is currently controlled on a section by section basis with
   defines in machine/param.h.  All sections are currently enabled.

 - this code is not as clean as I would like, but that can wait till later.

 - the "giant lock" still surrounds most instances of this "cpl region".
   I still have to do the code that arbitrates setting cpl between the
   top and bottom halves of the kernel.

 - the possibility of deadlock exists, I am committing the code at this
   point so as to exercise it and detect any such cases B4 the "giant lock"
   is removed.
1997-08-24 00:05:37 +00:00
Steve Passe
4a73d99f7e Made PEND_INTS default.
Made NEW_STRATEGY default.
Removed misc. old cruft.

Centralized simple locks into mp_machdep.c
Centralized simple lock macros into param.h

More cleanup in the direction of making splxx()/cpl MP-safe.
1997-08-21 05:08:25 +00:00
Steve Passe
7b185ef809 Preperation for moving cpl into critical region access.
Several new fine-grained locks.
New FAST_INTR() methods:
 - separate simplelock for FAST_INTR, no more giant lock.
 - FAST_INTR()s no longer checks ipending on way out of ISR.
sio made MP-safe (I hope).
1997-08-20 05:25:48 +00:00
Steve Passe
e9e75c4e9a Fixed imen alignment.
Submitted by:	Bruce Evans <bde@zeta.org.au>
1997-07-31 17:28:56 +00:00
Steve Passe
fa4e34805d Removed the simplelock functions.
Cleaned up the other functions.
1997-07-24 23:49:44 +00:00
Steve Passe
e78205df5b Fixed possible deadlock from recursive INTs on same cpu. Since
we use lazy masking INTREN()/INTRDIS() might be called with INTs enabled.
This means another higher prio INT to the same cpu could attempt to
re-enter the critical region, but would spin waiting for the lock.  Since
it is the owner, it would deadlock.
1997-07-23 21:25:31 +00:00
Steve Passe
812e4da7a8 New simple_lock code in asm:
- s_lock_init()
 - s_lock()
 - s_lock_try()
 - s_unlock()

Created lock for IO APIC and apic_imen  (SMP version of imen)
 - imen_lock

Code to use imen_lock for access from apic_ipl.s and apic_vector.s.
Moved this code *outside* of mp_lock.

It seems to work!!!
1997-07-23 20:47:19 +00:00
Steve Passe
919bdda1d4 Coded simple_lock and friends in asm. 1997-07-23 05:49:19 +00:00
Steve Passe
87a6f31089 Last commit didn't take, operator error??? 1997-07-22 20:12:32 +00:00
Steve Passe
35b3c4a0e5 Developed a new strategy for handling the 8254/8259/APIC issue. 1997-07-20 19:41:38 +00:00
Steve Passe
797cb61b54 Added #code to support define APIC_PIN0_TIMER.
This code ALWAYS runs the 8254 timer thru the 8259 ICU.
It depricates the usage of "options SMP_TIMER_NC" in the config file.
1997-07-19 03:59:28 +00:00
Steve Passe
bed422e5a3 SMP or APIC_IO:
- Increased NIDT to 256.
 - Moved IPI vectors up above the linux compat vector.
 - Removed runtime setup of RTC vector.
1997-07-19 02:28:30 +00:00
Steve Passe
81c1993f87 Split vector.s into UP and SMP specific files:
- vector.s		<- stub called by i386/exception.s
 - icu_vector.s		<- UP
 - apic_vector.s	<- SMP

Split icu.s into UP and SMP specific files:
 - ipl.s		<- stub called by i386/exception.s (formerly icu.s)
 - icu_ipl.s		<- UP
 - apic_ipl.s		<- SMP

This was done in preparation for massive changes to the SMP INTerrupt
mechanisms.  More fine tuning, such as merging ipl.s into exception.s,
may be appropriate.
1997-05-26 17:58:27 +00:00