Commit Graph

29 Commits

Author SHA1 Message Date
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Adrian Chadd
71e8eac4fd [mdio] migrate mdiobus out of etherswitch and into a top-level device of its own.
The mdio driver interface is generally useful for devices that require
MDIO without the full MII bus interface. This lifts the driver/interface
out of etherswitch(4), and adds a mdio(4) man page.

Submitted by:	Landon Fuller <landon@landonf.org>
Differential Revision:	https://reviews.freebsd.org/D4606
2015-12-26 02:31:39 +00:00
Zbigniew Bodek
4ac30cc1e0 Improve style in mge driver
Minor improvements introduced to ensure code follows FreeBSD style
guidelines.

Reviewed by:    adrian
Obtained from:  Semihalf
Submitted by:   Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D3904
2015-10-25 22:20:13 +00:00
Zbigniew Bodek
446892110d Change improper locking assertion in mge
Assertion used here was invalid. If current thread helds any of locks,
we never want to recurse on them.

Obtained from:  Semihalf
Submitted by:   Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D3903
2015-10-25 22:17:10 +00:00
Zbigniew Bodek
3c71b84f0a Add etherswitch support to mge
This commit introduces support for etherswitch devices that utilize SMI as
a way of accessing its registers. SMI register is located in address space
of mge -- access to it was exported through MDIO interface.

Attachment functions were enhanced so as to ensure proper initialisation
in both cases: 1) PHYs attached directly to mge, 2) PHYs attached to
switch device and switch attached to mge. Attachment of etherswitch device
depends on dts entry with compatible="mrvl,sw" property. If none is found,
typical PHY attachment procedure follows.

In case of switch attached, PHYs' status and configuration is accessible
via etherswitchcfg, and ifconfig shows always-up, non-configurable mge
interfaces.

Due to the fact that there may be simultaneous accessess to SMI
registers (e.g. from PHY attached to one of mge instances and switch
to the other), SMI access interlock was added. It is SX lock,
because sleep ability is necessary -- busy-waiting would result
in poor performance due to long delays required by hardware.
Underlying switch driver is obliged to use sleepable locks as well.

Reviewed by:    adrian
Obtained from:  Semihalf
Submitted by:   Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D3900
2015-10-25 22:00:56 +00:00
Gleb Smirnoff
c8dfaf382f Mechanically convert to if_inc_counter(). 2014-09-19 03:51:26 +00:00
Fabien Thomas
b8fad6c0ef Optim and Fix for mge driver:
- add missing rcvif in mbuf
- add missing ipacket stat
- remove uncessary mbuf copy on output path
- fix deadlock of the TX engine in case of error

Obtained from:	NETASQ
MFC after:	2 weeks
2014-07-07 08:22:39 +00:00
Ian Lepore
add35ed5b8 Follow r261352 by updating all drivers which are children of simplebus
to check the status property in their probe routines.

Simplebus used to only instantiate its children whose status="okay"
but that was improper behavior, fixed in r261352.  Now that it doesn't
check anymore and probes all its children; the children all have to
do the check because really only the children know how to properly
interpret their status property strings.

Right now all existing drivers only understand "okay" versus something-
that's-not-okay, so they all use the new ofw_bus_status_okay() helper.
2014-02-02 19:17:28 +00:00
Eitan Adler
7a22215c53 Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this
shifts into the sign bit.  Instead use (1U << 31) which gets the
expected result.

This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.

A similar change was made in OpenBSD.

Discussed with:	-arch, rdivacky
Reviewed by:	cperciva
2013-11-30 22:17:27 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Andre Oppermann
9d1c4ca773 Remove unused and incomplete support for delayed fragment checksums
from bce(4), bxe(4), mge(4) and ti(4) drivers.
2013-08-19 10:20:20 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Oleksandr Tymoshenko
75f1438be6 Merging of projects/armv6, part 6
r229271:
    Import files needed to build ARMADA XP kernel.

Submitted by:	Grzegorz Bernacki
2012-08-15 04:07:18 +00:00
Hiroki Sato
c8953e1273 Add support for Marvell 88F6282.
Sponsored by:	Plat'Home, Co.,Ltd.
2012-07-28 21:56:24 +00:00
Scott Long
62ce43ccc8 More conversions of drivers to use the PCI parent DMA tag. 2012-03-12 18:15:08 +00:00
Rafal Jaworowski
aa15e881bb Respect phy-handle property in Ethernet nodes of the device tree.
This lets specify whereabouts of the parent PHY for a given MAC node
(and get rid of ugly kludges in mge(4) and tsec(4)).

Obtained from:	Semihalf
MFC after:	1 week
2012-03-04 19:22:52 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Rafal Jaworowski
db5ef4fc77 Convert Marvell ARM platforms to FDT convention.
The following systems are involved:

  - DB-88F5182
  - DB-88F5281
  - DB-88F6281
  - DB-78100
  - SheevaPlug

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Marvell ARM SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - Since the common FDT infrastrucutre (fdtbus, simplebus) is used we say
    good by to obio / mbus drivers and numerous hard-coded config data.

Note that world needs to be built WITH_FDT for the affected platforms.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation.
2010-06-13 13:28:53 +00:00
Rafal Jaworowski
d6bdd318a3 Assorted fixes for mge(4).
- Use proper map for the busdma sync on mge descriptor.
- Remove unnecesary busdma sync.
- Eliminate redundant locking in mge_reinit_rx() (just assert).
- Kill unused variable.

Submitted by:	Grzegorz Bernacki
Obtained from:	Semihalf
MFC after:	1 week
2010-02-17 17:03:04 +00:00
Martin Blapp
c2ede4b379 Remove extraneous semicolons, no functional changes.
Submitted by:	Marc Balmer <marc@msys.ch>
MFC after:	1 week
2010-01-07 21:01:37 +00:00
Philip Paeps
a6eb469d8e Fix autonegotiation: tell the MAC where to find the PHY.
Fix crashes in the detach path.

Submitted by:	Kristof Provost <kristof@sigsegv.be>
MFC after:	1 month
2009-12-29 14:00:17 +00:00
Rafal Jaworowski
18159f6a49 Introduce MII_ADDR_BASE option on ARM, which allows to override the default
per platform requirements.

Notes:
- Only used by mge(4) at the moment.

- This is very simplified approach and should be replaced by some long-term
  solution for managing the board/platform configuration (among others the
  MAC-PHY binding info).

Submitted by:	Michal Hajduk
Obtained from:	Semihalf
2009-08-25 09:47:12 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Andriy Gapon
8e45f0b7c6 strict kobj signatures: fix assortment of miibus_writereg impls
return type should be int, not void

Reviewed by:	imp, current@
Approved by:	jhb (mentor)
2009-06-11 17:14:54 +00:00
Attilio Rao
1abcdbd127 When user_frac in the polling subsystem is low it is going to busy the
CPU for too long period than necessary.  Additively, interfaces are kept
polled (in the tick) even if no more packets are available.
In order to avoid such situations a new generic mechanism can be
implemented in proactive way, keeping track of the time spent on any
packet and fragmenting the time for any tick, stopping the processing
as soon as possible.

In order to implement such mechanism, the polling handler needs to
change, returning the number of packets processed.
While the intended logic is not part of this patch, the polling KPI is
broken by this commit, adding an int return value and the new flag
IFCAP_POLLING_NOCOUNT (which will signal that the return value is
meaningless for the installed handler and checking should be skipped).

Bump __FreeBSD_version in order to signal such situation.

Reviewed by:	emaste
Sponsored by:	Sandvine Incorporated
2009-05-30 15:14:44 +00:00
Rafal Jaworowski
5817716faf mge(4): fix two bugs, which were leading to crash/hang under very heavy
network load.

1. Leave the RX interrupt routine if there is no mbuf available.

2. Properly initialize and track tx_desc_used_count counter so as not to
leak mbuf while traversing used descriptors.

Obtained from:	Semihalf
2009-04-16 11:38:06 +00:00
Rafal Jaworowski
bc26e2e38f Adjust Marvell Discovery (MV78xxx) support to recognize newest chip revisions,
handle Z0 revision (early silicon) explicitly due to its quirks.

Obtained from:	Marvell, Semihalf
2009-04-16 11:20:18 +00:00
Rafal Jaworowski
8e1dc58e8c Handle mge(4) chip revision differences at run-time rather then compile time,
which is more flexible for future revisions, and lets eliminate some #defines
and compile conditionals.

Obtained from:	Semihalf
2009-01-08 11:09:27 +00:00
Rafal Jaworowski
9f55f5f5cf Marvell Gigabit Ethernet controller driver.
This supports 1Gbps Ethernet engine found on ARM-based SOCs (Orion, Kirkwood,
Discovery), as well as on system controllers for PowerPC processors (MV64430,
MV6446x).

The following advanced features are supported:

  - multicast
  - VLAN tagging
  - IP/TCP/UDP checksum calculation offloading
  - polling
  - interrupt coalescing

Obtained from:	Marvell, Semihalf
2008-10-14 07:24:18 +00:00