Summary: In r220638, stoppcbs started being tracked. This never got exposed to
ddb though, so kdb_thr_ctx() didn't know how to look them up.
This allows switching to threads on stopped CPUs in kdb.
Submitted by: Brandon Bergren <git_bdragon.rkt0.net>
Differential Revision: https://reviews.freebsd.org/D15986
PowerISA 3.0 makes several changes to not only the format of the HPT but
also the behavior surrounding it. For instance, TLBIE no longer requires
serialization. Removing this lock cuts buildworld time in half on a
18-core/72-thread POWER9 system, demonstrating that this lock is highly
contended on such a system.
There was odd behavior observed trying to make this change in a
backwards-compatible manner in moea64_native.c, so the best option was to
fully split it, and largely revert the original changes adding POWER9
support to the original file.
Suggested by: nwhitehorn
Summary:
Added ptrace support for getting/setting the remaining part of the VSX registers
(the part that's not already covered by FPR or VR registers).
This is necessary to add support for VSX registers in debuggers.
Submitted by: Luis Pires
Differential Revision: https://reviews.freebsd.org/D15458
This will let us use much more KVA for ZFS ARC where needed. This may be
incresed in the future if memory requirements increase.
Discussed with: nwhitehorn
Recently a change was made which broke loading 32-bit binaries on powerpc64,
with an assertion in ld-elf32.so.1:
ld-elf32.so.1: assert failed:
/usr/local/poudriere/jails/ppc64/usr/src/libexec/rtld-elf/rtld.c:390
It turns out Elf32_AuxInfo was broken for a very long time on powerpc64, as
it uses long and pointers, which are both 64 bits on powerpc64, and only
manifested with the recent work on auxargs.
This reduces the CPU cycle wastage on power9, which is SMT4. Any idle
thread that's spinning is simply starving working threads on the same core
of valuable resources.
This can be reduced further by taking more advantage of the PSSCR supported
states, as well as permitting state loss, as is currently done for power8.
The currently implemented stop state is the lowest latency, which may still
consume resources.
POWER9 supports Radix page tables in addition to Hashed page tables. When
Radix page tables are in use, the TLB is cut in half, so that half of the
TLB is used for the page walk cache. This is the default behavior, however
FreeBSD currently does not support Radix tables. Clear this bit so that we
can use the full TLB. Do this in the MMU logic so that configuration can be
localized to the specific translation format. Once we do support Radix
tables, the setup for that will be localized to the Radix MMU kobj.
Summary:
POWER9 systems use a new interrupt controller, XIVE, managed through OPAL
firmware calls. The OPAL firmware includes support for emulating the previous
generation XICS presentation layer in addition to a new "XIVE Exploitation"
mode. As a stopgap until we have XIVE exploitation mode, enable XICS emulation
mode so that we at least have an interrupt controller.
Since the CPPR is local to the current CPU, it cannot be updated for APs when
initializing on the BSP. This adds a new function, directly called by the
powernv platform code, to initialize the CPPR on AP bringup.
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D15492
Summary:
There were 2 issues that were preventing correct symbol resolution
on PowerPC/pseries:
1- memory corruption at chrp_attach() - this caused the inital
part of the symbol table to become zeroed, which would cause
the kernel linker to fail to parse it.
(this was probably zeroing out other memory parts as well)
2- DDB symbol resolution wasn't working because symtab contained
not relocated addresses but it was given relocated offsets.
Although relocating the symbol table fixed this, it broke the
linker, that already handled this case.
Thus, the fix for this consists in adding a new DDB macro:
DB_STOFFS(offs) that converts a (potentially) relocated offset
into one that can be compared with symbol table values.
PR: 227093
Submitted by: Leandro Lupori <leandro.lupori_gmail.com>
Differential Revision: https://reviews.freebsd.org/D15372
The POWER9 MMU (PowerISA 3.0) is slightly different from current
configurations, using a partition table even for hypervisor mode, and
dropping the SDR1 register. Key off the newly early-enabled CPU features
flags for the new architecture, and configure the MMU appropriately.
The POWER9 MMU ignores the "PSIZ" field in the PTCR, and expects a 64kB
table. As we are enabled for powernv (hypervisor mode, no VMs), only
initialize partition table entry 0, and zero out the rest. The actual
contents of the register are identical to SDR1 from previous architectures.
Along with this, fix a bug in the page table allocation with very large
memory. The table can be allocated on any 256k boundary. The
bootstrap_alloc alignment argument is an int, and with large amounts of
memory passing the size of the table as the alignment will overflow an
integer. Hard-code the alignment at 256k as wider alignment is not
necessary.
Reviewed by: nwhitehorn
Tested by: Breno Leitao
Relnotes: Yes
The new POWER9 MMU configuration is slightly different from current setups.
Rather than special-casing on POWER9, move the initialization of cpu_features
and cpu_features2 to as early as possible, so that platform and MMU
configuration can be based upon CPU features instead of specific CPUs if at all
possible.
Reviewed by: nwhitehorn
sysentvec::sv_hwcap/sv_hwcap2 are pointers to u_long, so cpu_features* need
to be u_long to use the pointers. This also requires a temporary cast in
printing the bitfields, which is fine because the feature flag fields are
only 32 bits anyway.
Not all feature flags are synced. Those for processors we don't currently
support are ignored currently. Those that are supported are synced best I
can tell. One flag was renamed to match the Linux flag name
(PPC_FEATURE2_VCRYPTO -> PPC_FEATURE2_VEC_CRYPTO).
Summary:
Powerpc64 has support for a register called Data Stream Control Register
(DSCR), which basically controls how the hardware controls the caching and
prefetch for stream operations.
Since mfdscr and mtdscr are privileged instructions, we need to emulate them,
and
keep the custom DSCR configuration per thread.
The purpose of this feature is to change DSCR depending on the operation, set
to DSCR Default Prefetch Depth to deepest on string operations, as memcpy.
Submitted by: Breno Leitao
Differential Revision: https://reviews.freebsd.org/D15081
Summary:
This code adds the basic infrastructure for the facility subsystem. A facility
trap is raised when an unavailable instruction is executed. One example is
executing a Hardware Transactional Memory instruction while the MSR[TM] is
disabled. In the past, there was a specific interrupt for it (FP, VEC), but the
new instructions seem to be multiplexed on this facility interrupt.
The root cause of the trap is provided on Facility Status and Control Register
(FSCR) register.
Submitted by: Breno Leitao
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D14566
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
As with AIM64, map the DMAP at the beginning of the fourth "quadrant" of
memory, and move the KERNBASE to the the start of KVA.
Eventually we may run the kernel out of the DMAP, but for now, continue
booting as it has been.
accomplishes a few things:
- Makes NULL an invalid address in the kernel, which is useful for catching
bugs.
- Lays groundwork for radix-tree translation on POWER9, which requires the
direct map be at high memory.
- Similarly lays groundwork for a direct map on 64-bit Book-E.
The new base address is chosen as the base of the fourth radix quadrant
(the minimum kernel address in this translation mode) and because all
supported CPUs ignore at least the first two bits of addresses in real
mode, allowing direct-map addresses to be used in real-mode handlers.
This is required by Linux and is part of the architecture standard
starting in POWER ISA 3, so can be relied upon.
Reviewed by: jhibbits, Breno Leitao
Differential Revision: D14499
correctly for the data contained on each memory page.
There are several components to this change:
* Add a variable to indicate the start of the R/W portion of the
initial memory.
* Stop detecting NX bit support for each AP. Instead, use the value
from the BSP and, if supported, activate the feature on the other
APs just before loading the correct page table. (Functionally, we
already assume that the BSP and all APs had the same support or
lack of support for the NX bit.)
* Set the RW and NX bits correctly for the kernel text, data, and
BSS (subject to some caveats below).
* Ensure DDB can write to memory when necessary (such as to set a
breakpoint).
* Ensure GDB can write to memory when necessary (such as to set a
breakpoint). For this purpose, add new MD functions gdb_begin_write()
and gdb_end_write() which the GDB support code can call before and
after writing to memory.
This change is not comprehensive:
* It doesn't do anything to protect modules.
* It doesn't do anything for kernel memory allocated after the kernel
starts running.
* In order to avoid excessive memory inefficiency, it may let multiple
types of data share a 2M page, and assigns the most permissions
needed for data on that page.
Reviewed by: jhb, kib
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14282
These interfaces were put in place to let QorIQ SoCs dictate CPU idling
semantics, in order to support capabilities such as NAP mode and deep sleep.
However, this never stabilized, and the idling support reverted back to
CPU-level rather than SoC level. Move this code back to cpu.c instead. If
at a later date the lower power modes do come to fruition, it should be done
by overriding the cpu_idle_hook instead of this platform hook.
We don't support float in the boot loaders, so don't include
interfaces for float or double in systems headers. In addition, take
the unusual step of spiking double and float to prevent any more
accidental seepage.
When processor enters power-save state it releases resources shared with other
cpu threads which makes other cores working much faster.
This patch also implements saving and restoring registers that might get
corrupted in power-save state.
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Reviewed by: jhibbits, nwhitehorn, wma
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D14330
This is part of a long-term goal of merging Book-E and AIM into a single GENERIC
kernel. As more work is done, the struct may be optimized further.
Reviewed by: nwhitehorn
We don't support older compilers. Most of the code in these files is
for pre-3.0 gcc, which is at least 15 years obsolete. Move to using
phk's sys/_stdargs.h for all these platforms.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14323
threads from compile-time defines to global variables. This removes a
significant amount of duplicated runtime patches to the compile-time
defines, centralizing the conditional logic in the early startup code.
Reviewed by: jhibbits
used with hashed page tables on AIM and place it into a new, modular pmap
function called pmap_decode_kernel_ptr(). This function is the inverse
of pmap_map_user_ptr(). With POWER9 radix tables, which mapping to use
becomes more complex than just AIM/BOOKE and it is best to have it in
the same place as pmap_map_user_ptr().
Reviewed by: jhibbits
Commits r326203 and r326978 broke 64-bit booke kernels by introducing a 1MB
zero-pad between the ELF header and the start of the kernel. This didn't
cause a build failure, but caused kernels to need to be loaded into memory
1MB lower, which could easily break scripts expecting previous behavior.
This change matches the similar change made to AIM in r327358.
kernel by PHYS_TO_DMAP() as previously present on amd64, arm64, riscv, and
powerpc64. This introduces a new MI macro (PMAP_HAS_DMAP) that can be
evaluated at runtime to determine if the architecture has a direct map;
if it does not (or does) unconditionally and PMAP_HAS_DMAP is either 0 or
1, the compiler can remove the conditional logic.
As part of this, implement PHYS_TO_DMAP() on sparc64 and mips64, which had
similar things but spelled differently. 32-bit MIPS has a partial direct-map
that maps poorly to this concept and is unchanged.
Reviewed by: kib
Suggestions from: marius, alc, kib
Runtime tested on: amd64, powerpc64, powerpc, mips64
buffers into a new pmap-module function pmap_map_user_ptr() that can
be implemented by the respective modules. This is required to implement
non-segment-based AIM-ish MMU systems such as the radix-tree page tables
introduced by POWER ISA 3.0 and present on POWER9.
Reviewed by: jhibbits
using a new macro PHYS_TO_DMAP, which deliberately has the same name as the
equivalent macro on amd64. This also sets the stage for moving the direct
map to another base address.
Make sure to set LPCR[LPES] so that external interrupts set SRR0 and SRR1
instead of HSRR0 and HSRR1. Without this, external interrupt handlers would
get the wrong MSR value when executing, causing eventual madness.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
The data segement was too big.
Add a fix-up function like on ia32 for MAXDSIZ.
While here, bring also the MAXSSIZ closer to amd64 and add an equal fix-up
function for MAXSSIZ.
Reviewed by: jhibbits@
Obtained from: jhibbits@
Differential Revision: https://reviews.freebsd.org/D13753
is of limited utility outside of platform-specific code and can vary
at runtime when running as a hypervisor guest, so does not even have the
virtue of being a static identifier.
Reviewed by: jhibbits
is used as the bootloader on a number of PPC64 platforms. This involves the
following pieces:
- Making the first instruction a valid kernel entry point, since kexec
ignores the ELF entry value. This requires a separate section and linker
magic to prevent the linker from filling the beginning of the section
with stubs.
- Adding an entry point at 0x60 past the first instruction for systems
lacking firmware CPU shutdown support (notably PS3).
- Linker script changes to support the above.
MFC after: 1 month
They provide relaxed-ordered atomic access semantic. Due to the
FreeBSD memory model, the operations are syntaxical wrappers around
the volatile accesses. The volatile qualifier is used to ensure that
the access not optimized out and in turn depends on the volatile
semantic as implemented by supported compilers.
The motivation for adding the operation is to help people coming from
other systems or knowing the C11/C++ standards where atomics have
special type and require use of the special access operations. It is
still the case that FreeBSD requires plain load and stores of aligned
integer types to be atomic.
Suggested by: jhb
Reviewed by: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13534
Currently Facility Unavailable is absent and once an application
tries to use or access a register from a feature disabled in the
CPU it causes a kernel panic.
A simple test-case is:
int main() { asm volatile ("tbegin.;"); }
which will use TM (Hardware Transactional Memory) feature which
is not supported by the kernel and so will trigger the following
kernel panic:
----
fatal user trap:
exception = 0xf60 (unknown)
srr0 = 0x10000890
srr1 = 0x800000000000f032
lr = 0x100004e4
curthread = 0x5f93000
pid = 1021, comm = htm
panic: unknown trap
cpuid = 40
KDB: stack backtrace:
Uptime: 3m18s
Dumping 10 MB (3 chunks)
chunk 0: 11MB (2648 pages) ... ok
chunk 1: 1MB (24 pages) ... ok
chunk 2: 1MB (2 pages)panic: IOMMU mapping error: -4
cpuid = 40
Uptime: 3m18s
----
Since Hardware Transactional Memory is not yet supported by FreeBSD, treat
this as an illegal instruction.
PR: 224350
Submitted by: Gustavo Romero <gromero_AT_ibm_DOT_com>
MFC after: 2 weeks
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
