Ungate DMA clock on TGP and later to avoid packet loss.
A similar fix appears in Linux 639e298f432fb058a9496ea16863f53b1ce935fe
This may be needed as far back as SPT but no confirmation from intel or
other OS yet.
Obtained from: OpenBSD (if_em_hw.c 1.116)
MFC after: 2 weeks
Sponsored by: BBOX.io
This call only makes sense for ich8lan, and the shared code does it in
e1000_setup_init_funcs() above this deletion.
Obtained from: DPDK
MFC after: 2 weeks
Sponsored by: BBOX.io
Pull Request: https://github.com/freebsd/freebsd-src/pull/539
Incrementing these to avoid confusion in users; we are on par with these
out of tree versions.
Reviewed by: erj
MFC after: 2 weeks
Sponsored by: BBOX.io
Pull Request: https://github.com/freebsd/freebsd-src/pull/540
Clear the rings before reset to avoid a HW hang.
Inspired by em-7.7.8 and DPDK (1fc9701238edcf0541289b9ae15565b6d9d7ab30)
Reviewed by: erj
MFC after: 2 weeks
Sponsored by: BBOX.io
Pull Request: https://github.com/freebsd/freebsd-src/pull/540
These include I219 (20) through I219 (23), which ends at Raptor Lake.
This also corrects a discrepancy where the (16) devices should be
mac type "e1000_pch_tgp" and not "e1000_pch_adp".
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
PR: 269224
Reviewed by: erj@
MFC after: 1 day
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D38376
Extend the size of the local rx_buffer_size variable to account for
larger buffer sizes possible on 82580, i350 chips.
From i350 datasheet, 6.2.10 Initialization Control 4 (LAN Base Address
+ Offset 0x13):
When 4 ports are enabled maximum buffer size is 36 KB. When 2 ports are
enabled maximum buffer size is 72 KB. When only a single port is
enabled maximum buffer size is 144 KB.
and 8.3:
The overall available internal buffer size in the I350 for all ports is
144 KB for receive buffers and 80 KB for transmit Buffers. Disabled
ports memory can be shared between active ports and sharing can be
asymmetric. The default buffer size for each port is loaded from the
EEPROM on initialization.
From the reporter:
But for I350 when only 2 ports are used PBA size can be set as 72KB
(see datasheet RXPbsize or e1000_rxpbs_adjust_82580 function in
e1000_82575.c). In this case calculating the rx_buffer_size overflows
as 0x0048 << 10 = 73728 or 0x12000 pushed into u16. It is then set as
0x2000 or 8192.
PR: 263896
Reported by: hannula@gmail.com
Tested by: hannula@gmail.com
Approved by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D35167
Currently if an e1000 interface is set to a fixed media configuration,
for gigabit, it will participate in auto-negotiation as required by
IEEE 802.3-2018 Clause 37. However, if set to fixed media configuration
for 100 or 10, it does NOT participate in auto-negotiation.
By my reading of Clauses 28 and 37, while auto-negotiation is optional
for 100 and 10, it is not prohibited and is, in fact, "highly
recommended".
This patch enables auto-negotiation for fixed 100 and 10 media
configuration, in a similar manner to that already performed for 1000.
I.e., the patch enables advertising of just the manually configured
settings with the goal of allowing the remote end to match the manually
configured settings if it has them available.
To be clear, this patch does NOT allow an em(4) interface that has been
manually configured with specific media settings to respond to
auto-negotiation by then configuring different parameters to those that
were manually configured. The intent of this patch is to fully comply
with the requirements of Clause 37, but for 100 and 10.
The need for this has arisen on an em(4) link where the other end is
under a different administrative control and is set to full
auto-negotiation. Due to the cable length GigE is not working well. It
is desired to set the em(4) end to "media 100baseTX mediatype
full-duplex" which does work when both ends are configured that way.
Currently, because em(4) does not participate in autoneg for this
setting, the remote defaults to half-duplex - i.e., there's a duplex
mismatch and things don't work. With this patch, em(4) would inform the
remote that it has only 100baseTX full, the remote would match that and
it will work.
Approved by: erj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D34449
The logic that sets iri_vtag and M_VLANTAG does not handle the
case where the 802.11q VLAN tag is 0. Fix this issue across
the iflib drivers. While there, also improve and align the
VLAN tag check extraction, by moving it outside the RX descriptor
loop, eliminating a local variable and additional checks.
PR: 260068
Reviewed by: kbowling, gallatin
Reported by: erj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33156
Since isc_capenable (private copy of ifp->if_capenable) is
now synchronized to if_capenable, use it in the drivers
when checking the IFCAP_* bits.
This results in better cache usage and avoids indirection
through the ifp pointer.
PR: 260068
Reviewed by: kbowling, gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33156
The e1000 drivers (em, lem, igb) are currently looking at the
iflib copies of the capabilities bitvectors (scctx->isc_capabilities
and scctx->isc_capenable) rather than the ifnet ones
(ifp->if_capabilities and ifp->if_capenable). However, the latter
are the ones that are actually updated by ifconfig and that should
be used by the drivers during interface operation. The former are
set by the driver on interface attach (for iflib internal use)
and should not be used anymore by the driver.
This patch fixes the e1000 driver to use the correct bitvectors.
PR: 260068
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D33154
This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
Similarly to the other Intel drivers, don't try to process
RX checksum offloads when this feature (IFCAP_RXCSUM) is
disabled.
Reviewed by: gallatin, kbowling, erj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D33155
The ifp (struct ifnet) backpointer in the e1000 private ifnet
data is not used anymore since the iflib transition.
Remove it so that developers are not tempted to use it and
get a NULL pointer dereference.
Reviewed by: markj, kbowling, erj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D33157
This is useful for diagnosing problems. In particular, the errata
sheets identify the EEPROM version for many fixes.
Reviewed by: gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32333
Otherwise results in KASSERT with debug kernels because we rely on the
iflib CTX lock to implement the software serialization to the NVM model
Reviewed by: gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32333
Drop arguments of function prototypes since the file is mixed between
listing arg names and not.
No functional changes
Reviewed by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D32329
A change to MSI-X link handler was somehow causing issues on
MSI-based em(4) NICs.
Revert the change based on user reports and testing.
PR: 258551
Reported by: Franco Fichtner <franco@opnsense.org>, t_uemura@macome.co.jp
Reviewed by: markj, Franco Fichtner <franco@opnsense.org>
Tested by: t_uemura@macome.co.jp
MFC after: 1 day
Rename the 'struct adapter' to 'struct e1000_sc' to avoid type ambiguity
in things like kgdb.
Reviewed by: jhb, markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D32129
This patch is for the following updates to the K1 configurations:
Tx idle period for entering K1 should be 128 ns.
Minimum Tx idle period in K1 should be 256 ns.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
PR: 258153
Reviewed by: erj
Tested by: iron.udjin@gmail.com
Approved by: imp
Obtained from: DPDK (6f934fa24dfd437c90ead96bc7598ee77a117ede)
MFC after: 1 week
Various syncs with the e1000 shared code from DPDK:
"cid-gigabit.2020.06.05.tar.gz released by ND"
Approved by: imp
Obtained from: DPDK
MFC after: 1 week
Enabling ulp on link down when cable is connect caused an infinite
loop of linkup/down indications in the NDIS driver.
After discussed, correct flow is to enable ULP only when cable is
disconnected.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Approved by: imp
Obtained from: DPDK (4bff263d54d299269966365f9697941eecaa241b)
MFC after: 1 week
During LTO build compiler reports some 'false positive' warnings about
variables being possibly used uninitialized. This patch silences these
warnings.
Exemplary compiler warning to suppress (with LTO enabled):
error: 'link' may be used uninitialized in this function
[-Werror=maybe-uninitialized]
if (link) {
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Approved by: imp
Obtained from: DPDK (46136031f19107f4e9b6b3a952cb7f57877a7f0f)
MFC after: 1 week
In function e1000_update_mc_addr_list_vf(), "msgbuf[0]" is used prior
to initialization at "msgbuf[0] |= E1000_VF_SET_MULTICAST_OVERFLOW".
And "msgbuf[0]" is overwritten at "msgbuf[0] = E1000_VF_SET_MULTICAST".
Fix it by moving the second line prior to the first one that mentioned
above.
Fixes: dffbaf7880a8 ("e1000: revert fix for multicast in VF")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Approved by: imp
Obtained from: DPDK (f58ca2f9ef6)
MFC after: 1 week
This fixes the timed out for shadow RAM write EEWR can't be detected.
Fixes: 5a32a257f957 ("e1000: more NICs in base driver")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Approved by: imp
Obtained from: DPDK (4a8ab48ec47b3616272e50620b8e1a9599358ea6)
MFC after: 1 week
Due timing issues in WHL and since recovery by host is
not always supported, increased timeout for Manageability Engine(ME)
to finish Ultra Low Power(ULP) exit flow for Nahum before timer expiration.
Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (cf1f3ca45d33e793ca581200b4000c39a798113e)
MFC after: 1 week
Added defines for the EEC, SHADOWINF and FLFWUPDATE registers needed for
the nvmupd_validate_offset function to correctly validate the NVM update
offset.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (2c7fe65ab9a31e6ebf438dad7ccc59bcde83a89f)
MFC after: 1 week
Now the functions are being accessed outside of the file, we need
to properly expose them for silicon families to use.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (df01c0ee277d51f81d7d72501dba97550d3b6c4a)
MFC after: 1 week
This code is required for the update for system clock.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (3f0188c8f29847038bc9f306b2570ace57e3811c)
MFC after: 1 week
Add two files base.c and base.h to reduce the redundancy
in the silicon family code.
Remove the code duplication from e1000_82575 files.
Clean family specific functions from base.
Fix up a stray and duplicate function declaration.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (44dddd14059f151f39f7e075b887decfc9a10f11)
MFC after: 1 week
Fix typo in piece of code of NVM access for SPT.
And cleans up the remaining instances in the shared code
where it was not adhering to the Linux code standard.
Wrong description was found in the mentioned file, so fix them.
Remove shadowing variable declarations.
Relating to operands in bitwise operations having different sizes.
Unreachable code since *clock_in_i2c_* always return success.
Don't return unused s32 and don't check for constants.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (b8592c89c8fbc871d22313dcac0b86c89a7d5a62)
MFC after: 1 week
