Commit Graph

229954 Commits

Author SHA1 Message Date
Warner Losh
982e7bdafc We don't support gcc < 4.2.1, so varargs.h now is just #error
always. Unifdef for versions prior to 4.2.1 and remove now-unused
header files.

Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14323
2018-02-12 14:48:14 +00:00
Warner Losh
33e959abab Use standard pattern for stdargs.h
We don't support older compilers. Most of the code in these files is
for pre-3.0 gcc, which is at least 15 years obsolete. Move to using
phk's sys/_stdargs.h for all these platforms.

Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14323
2018-02-12 14:48:05 +00:00
Tycho Nightingale
58a6aaf7ec Provide further mitigation against CVE-2017-5715 by flushing the
return stack buffer (RSB) upon returning from the guest.

This was inspired by this linux commit:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/x86/kvm?id=117cc7a908c83697b0b737d15ae1eb5943afe35b

Reviewed by:	grehan
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D14272
2018-02-12 14:45:27 +00:00
Warner Losh
590682b6e6 Move devmatch to sbin from usr/sbin.
Since we want to use devmatch in context before a split /,/usr system
has mounted /usr, move devmatch to /sbin.

Sponsored by: Netflix
2018-02-12 14:44:21 +00:00
Warner Losh
ff99e28210 Fix typo 2018-02-12 06:52:49 +00:00
Warner Losh
8d99f31cbb Turn devmatch on by default.
Turn devmatch on by default. However, use 'start' instead of
'onestart' in the devmatch.conf file so the setting of
'devmatch_enable' is honored. Give an example of what to put in
devd.conf if you want to disable just the run-time part of devmatch.

Relnotes: yes
2018-02-12 06:51:20 +00:00
Warner Losh
ac28ac4863 Add usb.conf to ObsoleteFiles.
Add a note to UPDATING.
Fix a missing tab.

Relnotes: Yes
2018-02-12 06:42:38 +00:00
Warner Losh
4f28883dcd Install devmatch.conf, don't install usb.conf 2018-02-12 04:54:51 +00:00
Warner Losh
4d6e935eb2 Install devmatch int /etc/rc.d and echo modules being installed. 2018-02-12 04:52:25 +00:00
Warner Losh
4420d8e198 Switch to using devmatch to autoload drivers. Remove usb.conf
as obsolete because devmatch gets its information from the same
place as the genration scripts.
2018-02-12 04:45:26 +00:00
Warner Losh
c0c6f4d2e0 Add devmatch rc.d integration
Create simple script to load modules on demand based on the device
identifying information.

Sponsored by: Netflix
2018-02-12 04:45:17 +00:00
Conrad Meyer
4bc191c3dc device_add_child.9: reference logical opposite, device_delete_child(9) 2018-02-11 22:09:07 +00:00
Scott Long
63b1a33514 Print out the shared memory queues during initialization
Sponsored by:	Netflix
2018-02-11 20:15:47 +00:00
Brooks Davis
ad704a34bc Use syscall_helper_register(9) rather than syscall_register().
The usage is simpler, documented, and more common.

Reviewed by:	cem
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D14227
2018-02-11 18:37:08 +00:00
Warner Losh
38c35fec7a Consistent macro indentation is the hobgoblin of small minds
Line up the macro definitions and names here like the machine/stdarg.h
files that this replaced. This is easier to read and also makes it
easier to match up with other includes. Also two space indent va_end
to match the rest of the surrounding if block.
2018-02-11 17:45:38 +00:00
Ian Lepore
5eebd6c02b Regenerate devd/usb.conf after the recent addition of several new device IDs. 2018-02-11 16:35:56 +00:00
Ian Lepore
4a8b6f54d1 Add a device ID to uftdi for TIAO USB Multi Protocol Adapter (TUMPA).
PR:		225810
2018-02-11 16:35:23 +00:00
Mark Felder
82004aa8e1 Add Thomas Zander to ports-secteam 2018-02-11 16:12:55 +00:00
Edward Tomasz Napierala
11db7fa42b Make lock(1) use PAM. This makes the -p option work again. (Well, kind of,
because the whole idea of this utility is rather broken.)

This originally come from NetBSD, and was later reworked a bit.

Reviewed by:	des@ (earlier version)
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D4981
2018-02-11 13:35:31 +00:00
Conrad Meyer
b42712a8b7 Add GUID and alias for Apple APFS partition
PR:		225813
Submitted by:	James Wright <james.wright AT jigsawdezign.com>
2018-02-11 06:57:20 +00:00
Devin Teske
e6c0055599 Fix typo in dtrace_tcp(4)
Using args[2]->tcps_state as-documented results in error:
operator -> cannot be applied to pointer to type "void"

This error is accurate as the synopsis for tcp:::state-change is:
tcp:::state-change(void *, csinfo_t *, void *, tcpsinfo_t *, void *,
    tcplsinfo_t *);

args[2] refers to the third argument which is always NULL (as-
documented). The to-state for the TCP connection state transition is
actually in the fourth argument, args[3]->tcps_state.
2018-02-11 03:02:29 +00:00
Conrad Meyer
4b69e622d5 Document syscall_helper_register(9), syscall_helper_unregister(9) 2018-02-10 20:34:09 +00:00
Alan Somers
dc4e221c3a Convert tools/regression/sockets/socketpair to ATF
Reviewed by:	cem
MFC after:	3 weeks
Differential Revision:	https://reviews.freebsd.org/D14305
2018-02-10 19:43:52 +00:00
Conrad Meyer
e9180d6956 socketpair.2: Reference relevant POSIX standards
Sponsored by:	Dell EMC Isilon
2018-02-10 19:41:32 +00:00
Justin Hibbits
e4803b1c14 Fix uninitialized warning, and work around a bug in gcc over clobbering
Summary:
r329077 caused gcc to emit uninitialized use warnings.  Attempting to
fix those warnings yielded the following warnings:

usr.bin/tftp/main.c: In function 'main':
usr.bin/tftp/main.c:181: warning: variable 'el' might be clobbered by
'longjmp' or 'vfork'
usr.bin/tftp/main.c:182: warning: variable 'hist' might be clobbered by
'longjmp' or 'vfork'

This is a known bug in gcc, found at
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=24239

Work around that by simply marking hist and el as static.

Reviewed by:	imp
Differential Revision:	https://reviews.freebsd.org/D14302
2018-02-10 17:17:15 +00:00
Eugene Grosbein
6cd3353ba3 ppp(8): fix code producing debugging logs
Fix several cases when long buffer is copied to shorter one
using snprintf that results in contents truncation and
clobbering unsaved errno value and creation of misleading logs.

PR:		218517
Approved by:	avg (mentor)
MFC after:	1 month
2018-02-10 17:09:51 +00:00
Emmanuel Vadot
dc9b494e2b dts: Update our device tree sources files from Linux 4.15 2018-02-10 15:29:46 +00:00
Pedro F. Giffuni
0ed20b78b7 libcompat: Use %hu for unsigned shorts.
Obtained from:	DragonFlyBSD (git  82e1476a)
2018-02-10 14:45:29 +00:00
Andrey V. Elsukov
b2fe54bc8b Reinitialize IP header length after checksum calculation. It is used
later by TCP-MD5 code.

This fixes the problem with broken TCP-MD5 over IPv4 when NIC has
disabled TCP checksum offloading.

PR:		223835
MFC after:	1 week
2018-02-10 10:13:17 +00:00
Brooks Davis
946c028ec1 Use syscall_helper_register() to register syscalls and initialize though
the module interface.

This is the more common approach and the syscall_helper interface is
easier to understand.

Reviewed by:	jhb
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D14251
2018-02-10 01:09:22 +00:00
Alexander Motin
4f5d657343 Teach mps(4) and mpr(4) drivers to autotune chain frames.
This is a first part of the change.  It makes the drivers to calculate
the required number of chain frames to satisfy worst case scenarios, but
it does not change existing overly strict limits on them.  The next step
will be to rewrite the allocator to not require megabytes of physically
contiguous address space, that may be problematic if done after boot,
after doing which the limits can be removed.  Until that this code can
just correct user set limits, if they are set too high.

Sponsored by:	iXsystems, Inc.
Differential Revision:	https://reviews.freebsd.org/D14261
2018-02-10 00:55:46 +00:00
Ed Maste
5b9c365429 Regen src.conf.5 after r329093, WITH_/WITHOUT_LLVM_COV 2018-02-10 00:27:29 +00:00
Ed Maste
1b49115a40 Promote llvm-cov to a standalone option
Introduce WITH_/WITHOUT_LLVM_COV to match GCC's WITH_/WITHOUT_GCOV.
It is intended to provide a superset of the interface and functionality
of gcov.

It is enabled by default when building Clang, similarly to gcov and GCC.

This change moves one file in libllvm to be compiled unconditionally.
Previously it was included only when WITH_CLANG_EXTRAS was set, but the
complexity of a new special case for (CLANG_EXTRAS | LLVM_COV) is not
worth avoiding a tiny increase in build time.

Reviewed by:	dim, imp
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D142645
2018-02-10 00:22:35 +00:00
Brooks Davis
e3e9432478 Add a deprecation warning when using the feature which mounts devices
to see how much space it on them.

Adjust MOUNT_CHAR_DEVS to allow the free space of already mounted
devices to be displayed and report an appropriate error if the
device isn't mounted.

Reviewed by:	cem
MFC after:	1 week
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D8801
2018-02-10 00:22:25 +00:00
Alexander Motin
bc55f7298e Add sysctls for dnode block and indirect block shifts.
MFC after:	2 weeks
2018-02-09 23:29:50 +00:00
Kirk McKusick
c97f1d3f37 Add an explanation of the block size units output by prtblknos.
Suggested by: Ravi Pokala (rpokala@)
2018-02-09 22:23:10 +00:00
Jung-uk Kim
ff879b0799 MFV: r329072
Merge ACPICA 20180209.
2018-02-09 21:49:38 +00:00
Nathan Whitehorn
778c8dac96 Fix PowerMac G5 thermal management, plus likely other bugs, introduced in
r328113 and affecting SMP systems.

The way the time is set on PowerMacs is racy and relies on all the
CPUs in the system setting a register simultaneously in a rendezvous. A
few-cycle delay can result in out-of-sync times, which can break the
scheduler and result in calls like mtx_sleep() and pause() never timing out
if the thread is migrated while sleeping. r328113 added a call to a no-op
function between the beginning of the rendezvous and setting the time that
was only called on APs and added enough cycles to cause a problematic offset.
For some reason, the fan-management code was the first place this appeared.

Clue from:	andreast
Reported by:	many
2018-02-09 20:09:32 +00:00
Conrad Meyer
51adff9318 tftp(1): Clean up leading and trailing whitespace
Whitespace-only change.

Sponsored by:	Dell EMC Isilon
2018-02-09 20:00:51 +00:00
Kirk McKusick
13a025d5d8 Merge biodone_finish() back into biodone(). The primary purpose is
to make the order of operations clearer to avoid the race condition
that was fixed in r328914. In particular, this commit corrects a
similar race that existed in the soft updates callback.

Doing some sleuthing through the SVN repository, it appears that
bufdone_finish() was added to support XFS:

------------------------------------------------------------------------
r153192 | rodrigc | 2005-12-06 19:39:08 -0800 (Tue, 06 Dec 2005) | 13 lines

Changes imported from XFS for FreeBSD project:
- add fields to struct buf (needed by XFS)
    - 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3
    - b_pin_count, count of pinned buffer

- add new B_MANAGED flag
- add breada() function to initiate asynchronous I/O on read-ahead blocks.
- add bufdone_finish(), bpin(), bunpin_wait() functions

Patches provided by:    kan
Reviewed by:            phk
Silence on:             arch@

------------------------------------------------------------------------

It does not appear to ever have been used for anything else.  XFS was
disconnected in r241607:

------------------------------------------------------------------------
r241607 | attilio | 2012-10-16 03:04:00 -0700 (Tue, 16 Oct 2012) | 5 lines

Disconnect non-MPSAFE XFS from the build in preparation for dropping
GIANT from VFS.

This is not targeted for MFC.

------------------------------------------------------------------------

and removed entirely in r247631:

------------------------------------------------------------------------
r247631 | attilio | 2013-03-02 07:33:54 -0800 (Sat, 02 Mar 2013) | 5 lines

Garbage collect XFS bits which are now already completely disconnected
from the tree since few months.

This is not targeted for MFC.

------------------------------------------------------------------------

Since XFS support is gone, there is no reason to retain biodone_finish().

Suggested by: Warner Losh (imp)
Discussed with: cem, kib
Tested by: Peter Holm (pho)
2018-02-09 19:50:47 +00:00
Conrad Meyer
49fb06154b tftp(1): Fix libedit state corruption involving signals
This bug was first reported 14 years ago.  The problem was understood 8.5
years ago.  A patch that is functionally identical to this one was proposed
almost 8 years ago and languished in the PR system / Bugzilla.

PR:		63197
Submitted by:	lxv AT omut.org, fernando.apesteguia AT gmail.com
Reported by:	freebsd AT nbritton.org
2018-02-09 19:46:51 +00:00
Kirk McKusick
16c0c8eeec This is a little C-program that can be used to print out the list
of blocks used by a requested list of inodes.

For example, to list the blocks referenced by your kernel:

guest_12 % df /
Filesystem      1K-blocks     Used   Avail Capacity  Mounted on
/dev/gpt/rootfs  20307196 10707336 7975288    57%    /

guest_12 % ls -i /boot/kernel/kernel
160603 /boot/kernel/kernel

guest_12 % ./prtblknos /dev/gpt/rootfs 160603
160603:	lbn 0-7 blkno 3217584-3217647
	lbn 8-11 blkno 3217864-3217895 distance 216
First-level indirect, blkno 3217896-3217903 distance 0
	lbn 12-19 blkno 3217904-3217967 distance 8
	lbn 20-75 blkno 3251816-3252263 distance 33848
	lbn 76-83 blkno 3252368-3252431 distance 104
	lbn 84-91 blkno 3252464-3252527 distance 32
	lbn 92-852 blkno 3252896-3258983 distance 368

Each contiguous range of blocks is printed on a line.
The distance metric is the size of the gap from the end of the
previous set of blocks to the beginning of the next set of blocks.
Short distances are desirable.
2018-02-09 19:10:46 +00:00
Warner Losh
c1c35c1065 sort needs to be in ITOOLS since find -s was changed to find | sort. 2018-02-09 18:47:00 +00:00
Jung-uk Kim
04f27355c0 Import ACPICA 20180209. 2018-02-09 18:18:00 +00:00
Jonathan T. Looney
31ba4c7b5b On bootup, the amd64 pmap initialization code creates page-table
mappings for the pages used for the kernel and some initial allocations
used for the page table. It maps the kernel and the blocks used for
these initial allocations using 2MB pages.

However, if the kernel does not end on a 2MB boundary, it still maps the
last portion using a 2MB page, but reports that the unused 4K blocks
within this 2MB allocation are free physical blocks. This means that
these same physical blocks could also be mapped elsewhere - for example,
into a user process. Given the proximity to the kernel text and data
area, it seems wise to avoid allowing someone to write data to physical
blocks also mapped into these virtual addresses.

(Note that this isn't a security vulnerability: the direct map makes
most/all memory on the system mapped into kernel space. And, nothing
in the kernel should be trying to access these pages, as the virtual
addresses are unused. It simply seems wise to avoid reusing these
physical blocks while they are mapped to virtual addresses so close
to the kernel text and data area.)

Consequently, let's reserve the physical blocks covered by the
page-table mappings for these initial allocations.

Reviewed by:	kib, markj
MFC after:	2 weeks
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D14268
2018-02-09 17:46:33 +00:00
Alan Somers
ad4bbe575b Fix "zpool add" crash when a replacing vdev has a spare child
Fix an assertion in zpool that causes a crash when running any "zpool add"
command on a spare that contains a replacing vdev with a spare child.

This likely affects Illumos, too.

PR:		225546
MFC after:	3 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D14138
2018-02-09 16:08:57 +00:00
Warner Losh
8162ec9b35 We don't actually need env here, so drop it. All shells allow setting
of shell variables for the next command like this.
2018-02-09 15:50:32 +00:00
Kyle Evans
312640ff19 Teach nanobsd about armv7, add -m to qemu invocations
qemu defaults to 128 MiB of RAM, which has been found to not necessarily be
enough for booting the system, at least on amd64 and armv7

Add a sensible -m 512 to the examples so that they'll work out of the box
in the general case.

Reviewed by:	imp
Differential Revision:	https://reviews.freebsd.org/D14234
2018-02-09 14:31:11 +00:00
Roger Pau Monné
12363d8ea3 loader: fix endianness conversion
r328536 broke symbol loading on amd64 at least (and probably other
arches). r328826 contained the problem to ppc only by adding
pre-processors guards.

Fix this properly by moving the endianness conversion to separate
helper functions, and make the conversion more robust by using sizeof
instead of having to manually code the size of each field.

Finally list the fields in each structure in a macro in order to avoid
code repetition.

Sponsored by:		Citrix Systems R&D
Reviewed by:		kib emaste wma
Differential revision:	https://reviews.freebsd.org/D14267
2018-02-09 10:20:16 +00:00
Gleb Smirnoff
f7d3578564 Fix boot_pages exhaustion on machines with many domains and cores, where
size of UMA zone allocation is greater than page size. In this case zone
of zones can not use UMA_MD_SMALL_ALLOC, and we  need to postpone switch
off of this zone from startup_alloc() until full launch of VM.

o Always supply number of VM zones to uma_startup_count(). On machines
  with UMA_MD_SMALL_ALLOC ignore it completely, unless zsize goes over
  a page. In the latter case account VM zones for number of allocations
  from the zone of zones.
o Rewrite startup_alloc() so that it will immediately switch off from
  itself any zone that is already capable of running real alloc.
  In worst case scenario we may leak a single page here. See comment
  in uma_startup_count().
o Hardcode call to uma_startup2() into vm_mem_init(). Otherwise some
  extra SYSINITs, e.g. vm_page_init() may sneak in before.
o While here, remove uma_boot_pages_mtx. With recent changes to boot
  pages calculation, we are guaranteed to use all of the boot_pages
  in the early single threaded stage.

Reported & tested by:	mav
2018-02-09 04:45:39 +00:00