This is better than directly changing PCI configuration space of the
device because it makes the PCI bus aware of the configuration.
Also, the change allows to drop a bunch of code that duplicated
pci_enable_msi() functionality.
I wonder if it's possible to further simplify the code by using
pci_alloc_msi().
ivhd should attach after the root PCI bus and, thus, after the ACPI
Host-PCI bridge off which the bus hangs. This is because ivhd changes
PCI configuration of a PCI IOMMU device that is located on the root bus.
If the bus attaches after ivhd it clears the MSI portion of the
configuration. As a result IOMMU event interrupts would never be
delivered.
For regular ACPI devices the order is calculated as
ACPI_DEV_BASE_ORDER + level * 10
where level is a depth of the device in the ACPI namespace.
I expect the depth of the Host-PCI bridge to be two or three,
so ACPI_DEV_BASE_ORDER + 10 * 10 should be a sufficiently safe order
for ivhd.
This should fix the setup of the AMD-Vi event interrupt when vmm is
preloaded (as opposed to kldload-ed).
This ensures that we can receive further event interrupts.
See the description of the bits in the specification for
MMIO Offset 2020h IOMMU Status Register.
The bits are defined as set-by-hardware write-1-to-clear, same as all
the bits in the status register.
Discussed with: anish
Stop issuing pre-assigned number to enumerate all page table pages,
the assignment is incorrect. Instead automatically calculate the next
unused index. This index in fact does not serve any purpose except to
be unique to satisfy vm_page_grab() interface, we do not look up the
page by the index later.
Reported and tested by: emaste
Reviewed by: andrew
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
PR: 223906
Differential revision: https://reviews.freebsd.org/D13273
In the linux ENOADATA is frequently #defined as ENOATTR.
The change is required for an xattrs support implementation.
MFC after: 1 week
Discussed with: netchild
Approved by: pfg
Differential Revision: https://reviews.freebsd.org/D13221
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
For FreeBSD/arm64's cloudabi32 support, I'm going to need a TO_PTR() in
this place. Also use it for all of the other source files, so that the
difference remains as minimal as possible.
MFC after: 2 weeks
Ensure that an opening bracket always has a matching closing one.
Ensure that there is always a new-line at the end of a report line.
Also, add a space before the printed event flag.
Reviewed by: anish
The defined bits are the lower bits, not the higher ones.
Also, the specification has been extended to define bits 0:18 and they
all could potentially be interesting to us, so extend the width of the
field accordingly.
Reviewed by: anish
Many 8-byte entries have zero at byte 4, so the second 4-byte part is
skipped as a 4-byte padding entry. But not all 8-byte entries have that
property and they get misinterpreted.
A real example:
48 00 00 00 ff 01 00 01
This an 8-byte ACPI_IVRS_TYPE_SPECIAL entry for IOAPIC with ID 255 (bogus).
It is reported as:
ivhd0: Unknown dev entry:0xff
Fortunately, it was completely harmless.
Also, bail out early if we encounter an entry of a variable length type.
We do not have proper handling for those yet.
Reviewed by: anish
Upon successful completion, the execve() system call invokes
exec_setregs() to initialize the registers of the initial thread of the
newly executed process. What is weird is that when execve() returns, it
still goes through the normal system call return path, clobbering the
registers with the system call's return value (td->td_retval).
Though this doesn't seem to be problematic for x86 most of the times (as
the value of eax/rax doesn't matter upon startup), this can be pretty
frustrating for architectures where function argument and return
registers overlap (e.g., ARM). On these systems, exec_setregs() also
needs to initialize td_retval.
Even worse are architectures where cpu_set_syscall_retval() sets
registers to values not derived from td_retval. On these architectures,
there is no way cpu_set_syscall_retval() can set registers to the way it
wants them to be upon the start of execution.
To get rid of this madness, let sys_execve() return EJUSTRETURN. This
will cause cpu_set_syscall_retval() to leave registers intact. This
makes process execution easier to understand. It also eliminates the
difference between execution of the initial process and successive ones.
The initial call to sys_execve() is not performed through a system call
context.
Reviewed by: kib, jhibbits
Differential Revision: https://reviews.freebsd.org/D13180
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
similar to the kernel memory allocator.
This simplifies NUMA allocation because the domain will be known at wait
time and races between failure and sleeping are eliminated. This also
reduces boilerplate code and simplifies callers.
A wait primitive is supplied for uma zones for similar reasons. This
eliminates some non-specific VM_WAIT calls in favor of more explicit
sleeps that may be satisfied without new pages.
Reviewed by: alc, kib, markj
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
In reclaim_pv_chunk(), rotate the pv chunks list so that next
invocations of the reclaim do not scan the same pv chunks that could
not be freed. Only do the rotation when there is no parallel scan,
tracked by active_reclaims counter.
To rotate, move all chunks that are before current iteration marker,
after another marker that is inserted at the list tail on start of the
reclaim.
Reviewed by: alc
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Some callers of fpusetregs()/npxsetregs(), most importantly
set_fpcontext(), clear reserved bits. But some did not. Do the
clearing in fpusetregs() and remove now redundand operation from
set_fpcontext().
Reported by: Maxime Villard <max@m00nbsd.net>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is needed for the HDA emulation with FreeBSD guests.
Reviewed by: marcelo
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12832
timer frequency a power of two. This changes the frequency from 10 to
16.7 MHz (2 ^ 24 HZ). Using a power of two avoids roundoff errors when
doing arithmetic in sbintime_t units.
Testing shows this can fix erratic ntpd behavior in guests using the
hpet timer (which is the default for multicore guests).
Reported by: bsam@
Specifically, devices that do not support PCI-e FLR and were not
gracefully shutdown by the guest OS could continue to issue DMA
requests after the VM was terminated. The changes in r305485 meant
that those DMA requests were completed against the host's memory which
could result in random memory corruption. Instead, leave ppt devices
that are not attached to a VM disabled in the IOMMU and only restore
the devices to the host domain if the ppt(4) driver is detached from a
device.
As an added safety belt, disable busmastering for a pass-through device
when before adding it to the host domain during ppt(4) detach.
PR: 222937
Tested by: Harry Schmalzbauer <freebsd@omnilan.de>
Reviewed by: grehan
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12661
While here cache-align chains.
This shortens longest found chain during poudriere -j 80 from 32 to 16.
Pushing this higher up will probably require allocation on boot.
HEAD. Enable VIMAGE in GENERIC kernels and some others (where GENERIC does
not exist) on HEAD.
Disable building LINT-VIMAGE with VIMAGE being default.
This should give it a lot more exposure in the run-up to 12 to help
us evaluate whether to keep it on by default or not.
We are also hoping to get better performance testing.
The feature can be disabled using nooptions.
Requested by: many
Reviewed by: kristof, emaste, hiren
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12639
Note that pv_list_locks is an array and currently it fits 2 locks per line.
Resizing it and/or putting more locks in different lines requires several tests.
MFC after: 1 week
All of the kernel dump implementations keep track of the current offset
("dumplo") within the dump device. However, except for textdumps, they
all write the dump sequentially, so we can reduce code duplication by
having the MI code keep track of the current offset. The new
dump_append() API can be used to write at the current offset.
This is needed to implement support for kernel dump compression in the
MI kernel dump code.
Also simplify dump_encrypted_write() somewhat: use dump_write() instead
of duplicating its bounds checks, and get rid of the redundant offset
tracking.
Reviewed by: cem
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11722
For processing, reclaim_pv_chunk() removes the pv_chunk from the lru
list, which makes pc_lru linkage invalid. Then the pmap lock is
released, which allows for other thread to free the last pv entry
allocated from the chunk and call free_pv_chunk(), which tries to
modify the invalid linkage.
Similarly, the chunk is inserted into the private tailq new_tail
temporary. Again, free_pv_chunk() might be run and corrupt the
linkage for the new_tail after the pmap lock is dropped.
This is a consequence of r299788 elimination of pvh_global_lock, which
allowed for reclaim to run in parallel with other pmap calls which
free pv chunks.
As a fix, do not remove the chunk from pc_lru queue, use a marker to
remember the position in the queue iteration. We can safely operate
on the chunks after the chunk's pmap is locked, we fetched the chunk
after the marker, and we checked that chunk pmap is same as we have
locked, because chunk removal from pc_lru requires both pv_chunk_mutex
and the pmap mutex owned.
Note that the fix lost an optimization which was present in the
previous algorithm. Namely, new_tail requeueing rotated the pv chunks
list so that reclaim didn't scan the same pv chunks that couldn't be
freed (because they contained a wired and/or superpage mapping) on
every invocation. An additional change is planned which would improve
this.
Reported and tested by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
allocated, when requested range of descriptors does not fit into
currently allocated LDT, or trim the return if the range fits
partially. Before, the function returned EINVAL.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
use LDT segments immediately.
If the i386_set_ldt() call created a first LDT descriptor (and
consequently created the LDT) for our address space, LDTR is currently
loaded only on the CPU executing the syscall. Other CPUs executing
threads sharing the address space, would only load LDTR after context
switch.
Uncomment set_user_ldt_rv() and call it on all CPUs. Remove critical
section inside set_user_ldt(), it is not needed in the context of call
from smp_rendezvous().
Set md_ldt after md_ldt_sd is initialized using the same code sequence
as in user_ldt_free(). Do the whole initialization in a critical
section, to not race with the context switching while we set LDT.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
cpu_switch.S uses curproc->p_md.md_ldt value as the flag indicating
presence of the process LDT. The flag is checked and then ldt segment
descriptor is copied into the CPU' GDT slot.
Disallow context switches around clearing of the curproc LDT state by
performing the cleanup in critical section. Ensure that the md_ldt
flag is cleared before md_ldt_sd descriptor content is destroyed by
inserting fence between the operations.
We depend on the x86 memory model strong ordering guarantees, in
particular, that cpu_switch.S observes the writes to md_ldt and
md_ldt_sd in the expected order.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Provide consistent snapshot of the requested descriptors by preventing
other threads from modifying LDT while we fetch the data, lock dt_lock
around the read. Copy the data into intermediate buffer, which is
copied out after the lock is dropped.
Use guaranteed atomic (aligned volatile) reads of the descriptors to
use same-size atomic as CPU update to set A bit in the descriptor type
field.
Improve overflow checking for the descriptors range calculations and
remove unneeded casts.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
