the first cacheline if the buffer start address is not on a cacheline
boundary. Normally a buffer which is not cacheline-aligned is bounced,
but a special rule applies for mbufs, which are always misaligned due to
the header. We know the cpu will not write to the header while dma is in
progress (so we've been told anyway), but it may have written to the
header shortly before starting a read, so we need to flush that write out
to memory before invalidating the whole buffer.
In collaboration with Mical Meloun and Svata Kraus.
rename it to ufs_dirhashreclaimpercent, as suggested
by jhb@. As an added bonus this avoids divide-by-zero
errors.
Requested by: jhb, markj
Reviewied by: jhb, markj
commit 6d3c4c0922
Add terasic_mtl vt(4) framebuffer driver
terasic_mtl can be built with syscons(4) and vt(4) attachments, selected
at compile time.
commit 33240259b4
Clear terasic_mtl text buffer on attach
commit d188c2d241
Update terasic vt(4) driver for FreeBSD r269783
commit d1cc54eee8
Safety belt to ensure vt(4) fb parameters are correct
commit 76e6d468ef
Improve terasic_mtl_vt fdt parsing
- Use OF_getencprop to avoid need for explicit endian handling
(submitted by ray@freebsd.org)
- Check for expected length and correct pointer type
commit 3e2524b899
Correct device_printf usage
commit 9e53e3c8e0
Switch framebuffer to match host endianness
Xorg and xf86-video-scfb work much better with a native-endian
framebuffer.
commit 0f49259d59
Switch DE4 to vt(4) and enable kbdmux
commit 5bc96ebc89
Add missing \n in device_printf calls
Submitted by: emaste
Sponsored by: DARPA, AFRL
commit d0c7d235c0
Make the Altera JTAG UART device driver slightly more forgiving of
the foibles of a sub-par hrdware interface by increasing the timeout
for spotting JTAG polling from one to two seconds.
commit 19ed45a188
Update comment.
commit 8edfe803f0
Add a comment about a device-driver race condition that could cause the BERI
pipeline to wedge awaiting JTAG in the event that both the low-level console
and the tty layer decide to write to the JTAG FIFO just before JTAG is
disconnected. Resolving this race is a bit tricky as it looks like there
isn't a way to 'give the character back' to the tty layer when we discover
the race. The easy fix is to drop the character, which we don't yet do, but
perhaps should as that is a better outcome than wedging the pipeline.
commit 2ea26cf579
Add a comment about an inherent race with hardware in the Altera JTAG
UART's low-level console code.
Submitted by: rwatson
MFC after: 1 week
Sponsored by: DARPA, AFRL
Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert negative values of ticks to '1'. For unsigned integer overflow we
will get sufficiently smaller timeout values than expected.
Switch from callout_reset, which requires conversion to int based ticks
to callout_reset_sbt to avoid this.
Also correct isci to correctly resolve ccb timeout.
This was based on the original work done by Eygene Ryabinkin
<rea@freebsd.org> back in 5 Aug 2011 which used a macro to help avoid
the overlow.
Differential Revision: https://reviews.freebsd.org/D1157
Reviewed by: mav, davide
MFC after: 1 month
Sponsored by: Multiplay
- Dump an NT_X86_XSTATE note if XSAVE is in use. This note is designed
to match what Linux does in that 1) it dumps the entire XSAVE area
including the fxsave state, and 2) it stashes a copy of the current
xsave mask in the unused padding between the fxsave state and the
xstate header at the same location used by Linux.
- Teach readelf() to recognize NT_X86_XSTATE notes.
- Change PT_GET/SETXSTATE to take the entire XSAVE state instead of
only the extra portion. This avoids having to always make two
ptrace() calls to get or set the full XSAVE state.
- Add a PT_GET_XSTATE_INFO which returns the length of the current
XSTATE save area (so the size of the buffer needed for PT_GETXSTATE)
and the current XSAVE mask (%xcr0).
Differential Revision: https://reviews.freebsd.org/D1193
Reviewed by: kib
MFC after: 2 weeks
This change saves/restores the callee-saved MIPS floating point
registers as documented by the o32/n32/n64 spec ("MIPSpro N32
ABI Handbook", Table 2-1) for the _setjmp(3), _longjmp(3),
setjmp(3) and longjmp(3) C library functions. This is only
included when the C library is built with hardware floating point
support (or when "SOFTFLOAT" is not defined).
Submitted by: sson
MFC after: 1 month
Sponsored by: DARPA, AFRL
In this mode one head is in Active state, supporting all commands, while
another is in Standby state, supporting only minimal LUN discovery subset.
It is still incomplete since Standby state requires reservation support,
which is impossible to do right without having interlink between heads.
But it allows to run some basic experiments.
made getmntinfo() return empty flags for smbfs filesystems when
called with MNT_WAIT. It's not visible with mount(8), since it uses
MNT_NOWAIT, but broke autounmount(8) operation.
PR: 195161
Differential Revision: https://reviews.freebsd.org/D1194
Reviewed by: kib@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
related cleanups:
- Require each driver to initalize a mutex in the scsi_low_softc that
is shared with the scsi_low code. This mutex is used for CAM SIMs,
timers, and interrupt handlers.
- Replace the osdep function switch with direct calls to the relevant
CAM functions and direct manipulation of timers via callout(9).
- Collapse the CAM-specific scsi_low_osdep_interface substructure
directly into scsi_low_softc.
- Use bus_*() instead of bus_space_*().
- Return BUS_PROBE_DEFAULT from probe routines instead of 0.
- No need to zero softcs.
- Pass 0ul and ~0ul instead of 0 and ~0 to bus_alloc_resource().
- Spell "dettach" as "detach".
- Remove unused 'dvname' variables.
- De-spl().
Tested by: no one
- Add a per-softc mutex as a driver lock.
- Use callout(9) instead of timeout(9).
- Set softc pointer in si_drv1 of cdev instead of looking softc
up via devclass in cdev methods.
Tested by: no one
- Don't recurse driver mutex.
- Don't hold driver mutex across fubyte/subyte.
- Replace fubyte/subyte loops with copyin/copyout calls.
- Use relatively sane locking in wl_ioctl().
- Use bus space accessors instead of in*()/out*().
- Use callout(9) instead of timeout(9).
- Stop watchdog timer in detach and don't hold mutex across
bus_teardown_intr().
- Use device_printf() and if_printf().
- De-spl().
Tested by: no one
node. Take this in to account by searching until we find the range for the
root node.
Differential Revision: https://reviews.freebsd.org/D1160
Reviewed by: ian
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Without this fix, the vnet was NULL and would crash.
This fix is similar to what was done inside the ioctl handler for PF.
Tested by:
(1) Boot a kernel with "options VIMAGE" enabled
(2) Type:
echo "map lo0 from 10.0.0.0/24 to ! 10.0.0.0/24 -> 127.0.0.1/32" > /etc/ipnat.rules ; service ipnat onerestart
PR: 176992
Differential Revision: https://reviews.freebsd.org/D1191
Reviewed by: cy
Summary:
Currently if there are problems finding a symbol, backtrace ends up printing
something like:
0xdeadbeef: at +0x12345
Which is pretty useless. This on its own should be fixed (retrieving symbols),
but aside from that, using db_printsym() is a better solution anyway. If it
can't find a valid symbol it prints the actual address, and it has the added
benefit that if it can find the symbol, it might be able to print the file and
line as well.
Test Plan: Tested on my G4 PowerBook
Reviewers: #powerpc, nwhitehorn
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D1173
MFC after: 3 weeks
Early UART should be released right after system console initialization is
completed. Otherwise, after cninit() both early and system console coexist
what may lead to various issues (i.a. writing to unmapped early
UART address). This cannot be done in cninit_finish() since it can be
called late at the end of MI configuration.
Obtained from: Semihalf
Reviewed by: andrew
Sponsored by: The FreeBSD Foundation
lib/libngatm:
sys/contrib/ngatm/netnatm/saal/saal_sscop.c:4030:32: error: 'break' is bound to current loop, GCC binds it to the enclosing loop [-Werror,-Wgcc-compat]
} while(sn < sscop->vr_h && !QFIND(&sscop->rbuf, sn));
^
sys/contrib/ngatm/netnatm/saal/saal_sscop.c:173:4: note: expanded from macro 'QFIND'
break; \
^
1 error generated.
The idea is to remove any ambiguity by replacing the macro with an
equivalent static inline function.
Reviewed by: emaste, rpaulo
See also: http://reviews.llvm.org/D2518
Differential Revision: https://reviews.freebsd.org/D1188
In file included from cddl/contrib/opensolaris/common/ctf/ctf_create.c:31:
In file included from sys/cddl/contrib/opensolaris/uts/common/sys/sysmacros.h:34:
sys/cddl/contrib/opensolaris/uts/common/sys/isa_defs.h:334:9: warning: '_ILP32' macro redefined [-Wmacro-redefined]
#define _ILP32
^
<built-in>:26:9: note: previous definition is here
#define _ILP32 1
^
1 warning generated.
This is because clang 3.5.0 started predefining _ILP32 and __ILP32__ for
the i386 arch. (Earlier versions already predefined _LP64 and __LP64__
for the x86_64 arch.)
Reviewed by: emaste, avg, smh, delphij, markj
Differential Revision: https://reviews.freebsd.org/D1187
