This update brings initial support for Haswell GPUs.
Tested by: Many users of FreeBSD, PC-BSD and HardenedBSD
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5554
taskqueue_enqueue() was changed to support both fast and non-fast
taskqueues 10 years ago in r154167. It has been a compat shim ever
since. It's time for the compat shim to go.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: sephe
Differential Revision: https://reviews.freebsd.org/D5131
address and use this mechanism when:
1. kmem_alloc_{attr,contig}() can't find suitable free pages in the physical
memory allocator's free page lists. This replaces the long-standing
approach of scanning the inactive and inactive queues, converting clean
pages into PG_CACHED pages and laundering dirty pages. In contrast, the
new mechanism does not use PG_CACHED pages nor does it trigger a large
number of I/O operations.
2. on 32-bit MIPS processors, uma_small_alloc() and the pmap can't find
free pages in the physical memory allocator's free page lists that are
covered by the direct map. Tested by: adrian
3. ttm_bo_global_init() and ttm_vm_page_alloc_dma32() can't find suitable
free pages in the physical memory allocator's free page lists.
In the coming months, I expect that this new mechanism will be applied in
other places. For example, balloon drivers should use relocation to
minimize fragmentation of the guest physical address space.
Make vm_phys_alloc_contig() a little smarter (and more efficient in some
cases). Specifically, use vm_phys_segs[] earlier to avoid scanning free
page lists that can't possibly contain suitable pages.
Reviewed by: kib, markj
Glanced at: jhb
Discussed with: jeff
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4444
instead of GMBUS access for I2C transfers. The GMBUS driver falls back
to this mode when a transfer times out. However, the first transfer to
timeout was sending the request back to itself resulting in an panic due
to recursing on a lock. Fix it to forward the request on to the proper
device. This appears to have been accidentally changed in r277487.
Reported by: Joe Maloney <jmaloney@pcbsd.org>
Reviewed by: adrian, dumbbell, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D4599
o With new KPI consumers can request contiguous ranges of pages, and
unlike before, all pages will be kept busied on return, like it was
done before with the 'reqpage' only. Now the reqpage goes away. With
new interface it is easier to implement code protected from race
conditions.
Such arrayed requests for now should be preceeded by a call to
vm_pager_haspage() to make sure that request is possible. This
could be improved later, making vm_pager_haspage() obsolete.
Strenghtening the promises on the business of the array of pages
allows us to remove such hacks as swp_pager_free_nrpage() and
vm_pager_free_nonreq().
o New KPI accepts two integer pointers that may optionally point at
values for read ahead and read behind, that a pager may do, if it
can. These pages are completely owned by pager, and not controlled
by the caller.
This shifts the UFS-specific readahead logic from vm_fault.c, which
should be file system agnostic, into vnode_pager.c. It also removes
one VOP_BMAP() request per hard fault.
Discussed with: kib, alc, jeff, scottl
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
various reasons while executing user commands. After these commands are
completed, the pages backing the relocation regions are unheld.
Since relocation regions do not have to be page aligned, the code in
validate_exec_list() allocates 2 extra page pointers in the array of
held pages populated by vm_fault_quick_hold_pages(). However, the cleanup
code that unheld the pages always assumed that only the buffer size /
PAGE_SIZE pages were used. This meant that non-page aligned buffers would
not unheld the last 1 or 2 pages in the list. Fix this by saving the
number of held pages returned by vm_fault_quick_hold_pages() for each
relocation region and using this count during cleanup.
Reviewed by: dumbbell, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3965
* Remove obsolete drm_agp_*_memory() prototypes.
* Fix comment in drm_fops.c (outisde -> outside).
* Fix some formatting issues in drm_stub.c (spaces -> tabs).
* Add missing case statement (gen == 3) in intel_gpu_reset().
* Restore pci_enable_busmaster() call in the init path (fixes gpu hang on i945GM).
* Replace M_WAITOK with M_NOWAIT when the return value of malloc is checked (may be incorrect).
Submitted by: <s3erios@gmail.com>
Reviewed by: dumbbell
Approved by: dumbbell
Differential Revision: https://reviews.freebsd.org/D3413
release resources (such as unholding pages) when errors occur. Some
recently added error checks return immediately instead of jumping to a
label resulting in leaks. Fix these to jump to a label to do cleanup
instead.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3745
The pci bus driver handles the power state, it also manages
configuration state saving and restoring for its child devices. Thus a
PCI device driver does not have to worry about those things. In fact, I
observe a hard system hang when trying to suspend a system with active
radeonkms driver where both the bus driver and radeonkms driver try to
do the same thing. I suspect that it could be because of an access to a
PCI configuration register after the device is placed into D3 state.
Reviewed by: dumbbell, jhb
MFC after: 13 days
Differential Revision: https://reviews.freebsd.org/D3561
While here update the list of devices id to match the one in linux 3.8.13
Reviewed by: dumbbell
Differential Revision: https://reviews.freebsd.org/D3489
Keep a couple of old macros that will be removed lated when the rest of the code
will be updated to 3.8.13 equivalent.
Chase the renamed macros
Reviewed by: dumbbell
Differential Revision: https://reviews.freebsd.org/D3487
define GID_VIDEO in sys/conf.h, and use it together with UID_ROOT
to define DRM_DEV_UID and DRM_DEV_GID in the drmP.h files.
So there is one place where the UID's and GID's are defined.
Submitted by: ed@
Reviewed by: ed@, dumbbell@
Differential Revision: https://reviews.freebsd.org/D3360
devices in /dev/dri/ with this new group.
This will allow ports and users to more easily access to these devices
for OpenGL and OpenCL support.
Reviewed by: dumbbell@
Approved by: dumbbell@
Differential Revision: https://reviews.freebsd.org/D1260
While here, reduce the style diff with Linux.
There is no functional change. The goal is to ease the future update to
Linux 3.8's i915 driver.
MFC after: 2 months
This change re-organizes code a little bit to extract common pieces
of ttm_alloc_new_pages() and ttm_get_pages() into dedicated functions.
Also, for requests without address restrictions regular vm_page_alloc()
is used.
Lastly, when vm_page_alloc_contig() fails we call VM_WAIT before calling
vm_pageout_grow_cache() to ensure that there is enough free pages at all.
Reviewed by: kib
MFC after: 15 days
Use the same scheme implemented to manage credentials.
Code needing to look at process's credentials (as opposed to thred's) is
provided with *_proc variants of relevant functions.
Places which possibly had to take the proc lock anyway still use the proc
pointer to access limits.
logic is now placed in the mmap hook implementation rather than requiring
it to be placed in sys/vm/vm_mmap.c. This hook allows new file types to
support mmap() as well as potentially allowing mmap() for existing file
types that do not currently support any mapping.
The vm_mmap() function is now split up into two functions. A new
vm_mmap_object() function handles the "back half" of vm_mmap() and accepts
a referenced VM object to map rather than a (handle, handle_type) tuple.
vm_mmap() is now reduced to converting a (handle, handle_type) tuple to a
a VM object and then calling vm_mmap_object() to handle the actual mapping.
The vm_mmap() function remains for use by other parts of the kernel
(e.g. device drivers and exec) but now only supports mapping vnodes,
character devices, and anonymous memory.
The mmap() system call invokes vm_mmap_object() directly with a NULL object
for anonymous mappings. For mappings using a file descriptor, the
descriptors fo_mmap() hook is invoked instead. The fo_mmap() hook is
responsible for performing type-specific checks and adjustments to
arguments as well as possibly modifying mapping parameters such as flags
or the object offset. The fo_mmap() hook routines then call
vm_mmap_object() to handle the actual mapping.
The fo_mmap() hook is optional. If it is not set, then fo_mmap() will
fail with ENODEV. A fo_mmap() hook is implemented for regular files,
character devices, and shared memory objects (created via shm_open()).
While here, consistently use the VM_PROT_* constants for the vm_prot_t
type for the 'prot' variable passed to vm_mmap() and vm_mmap_object()
as well as the vm_mmap_vnode() and vm_mmap_cdev() helper routines.
Previously some places were using the mmap()-specific PROT_* constants
instead. While this happens to work because PROT_xx == VM_PROT_xx,
using VM_PROT_* is more correct.
Differential Revision: https://reviews.freebsd.org/D2658
Reviewed by: alc (glanced over), kib
MFC after: 1 month
Sponsored by: Chelsio
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri May 31 12:17:08 2013 +0000
drm: Sort connector modes based on vrefresh
Keeping the modes sorted by vrefresh before the pixel clock makes the
mode list somehow more pleasing to the eye.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
PR: 198936
Obtained from: Linux
MFC after: 1 month
MFC with: r280183
